Linux for Texus Instruments OMAP Processors

• Thread Index

• [patch-v2.6.39 2/7] arm: omap4: 4430sdp: drop ehci support
  • From: Felipe Balbi <balbi@xxxxxx>
• [patch-v2.6.39 1/7] arm: omap4: usb: explicitly configure MUSB pads
  • From: Felipe Balbi <balbi@xxxxxx>
• [patch-v2.6.39 0/7] Patches for next merge window
  • From: Felipe Balbi <balbi@xxxxxx>
• [patch-v2.6.39 03/12] usb: musb: gadget: do not poke with gadget's list_head
  • From: Felipe Balbi <balbi@xxxxxx>
• [patch-v2.6.39 12/12] usb: otg: notifier: switch to atomic notifier
  • From: Felipe Balbi <balbi@xxxxxx>
• [patch-v2.6.39 08/12] usb: otg: OMAP4430: Introducing suspend function for power management
  • From: Felipe Balbi <balbi@xxxxxx>
• [patch-v2.6.39 11/12] usb: musb: OMAP4430: Fix usb device detection if connected during boot
  • From: Felipe Balbi <balbi@xxxxxx>
• [patch-v2.6.39 10/12] usb: otg: TWL6030 Save the last event in otg_transceiver
  • From: Felipe Balbi <balbi@xxxxxx>
• [patch-v2.6.39 09/12] usb: otg: TWL6030: Introduce the twl6030_phy_suspend function.
  • From: Felipe Balbi <balbi@xxxxxx>
• [patch-v2.6.39 07/12] usb: otg: OMAP4430: Add phy_suspend function pointer to twl4030_usb_data
  • From: Felipe Balbi <balbi@xxxxxx>
• [patch-v2.6.39 06/12] usb: otg: Remove one unnecessary I2C read request.
  • From: Felipe Balbi <balbi@xxxxxx>
• [patch-v2.6.39 05/12] usb: otg: enable regulator only on cable/device connect
  • From: Felipe Balbi <balbi@xxxxxx>
• [patch-v2.6.39 04/12] usb: musb: Using runtime pm APIs for musb.
  • From: Felipe Balbi <balbi@xxxxxx>
• [patch-v2.6.39 02/12] usb: musb: gadget: beautify usb_gadget_probe_driver()/usb_gadget_unregister_driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [patch-v2.6.39 01/12] usb: musb: do not error out if Kconfig doesn't match board mode
  • From: Felipe Balbi <balbi@xxxxxx>
• [patch-v2.6.39 00/12] OMAP USB and MUSB patches for Next
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [1/7 v4] usb: otg: enable regulator only on cable/device connect
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [1/7 v4] usb: otg: enable regulator only on cable/device connect
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [1/7 v4] usb: otg: enable regulator only on cable/device connect
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 5/6 v8] OMAP2+: musb: hwmod adaptation for musb registration
  • From: Hema Kalliguddi <hemahk@xxxxxx>
• RE: [PATCH 5/6] ARM: pm: convert samsung platforms to generic suspend/resume support
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• Re: [PATCH 0/6 v8]usb: musb: hwmod and runtime pm support for musb
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 5/6 v8] OMAP2+: musb: hwmod adaptation for musb registration
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] omap4: 4430sdp: drop ehci support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: OMAP4 Mux FW question
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: OMAP4 Mux FW question
  • From: Sricharan R <r.sricharan@xxxxxx>
• Re: [PATCH 5/6 v8] OMAP2+: musb: hwmod adaptation for musb registration
  • From: Felipe Balbi <balbi@xxxxxx>
• [patch v2.6.39 3/3] usb: musb: gadget: do not poke with gadget's list_head
  • From: Felipe Balbi <balbi@xxxxxx>
• [patch v2.6.39 2/3] usb: musb: gadget: beautify usb_gadget_probe_driver()/usb_gadget_unregister_driver
  • From: Felipe Balbi <balbi@xxxxxx>
• [patch v2.6.39 1/3] usb: musb: do not error out if Kconfig doesn't match board mode
  • From: Felipe Balbi <balbi@xxxxxx>
• [patch v2.6.39 0/3] Patches for next merge window
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 0/8] OMAP4: hwmod data: Add a bunch of IPs
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 0/8] OMAP4: hwmod data: Add a bunch of IPs
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH 2/6] ARM: pm: add generic CPU suspend/resume support
  • From: Lorenzo Pieralisi <lorenzo.pieralisi@xxxxxxx>
• OMAP4 Mux FW question
  • From: archit taneja <archit@xxxxxx>
• [PATCH 8/8] OMAP4: hwmod data: Add AESS, McPDM, bandgap, counter_32k, MMC, KBD, ISS & IPU
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH 7/8] OMAP4: hwmod data: Add McBSP
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH 6/8] OMAP4: hwmod data: Add DMIC
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH 5/8] OMAP4: hwmod data: Add mailbox
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH 3/8] OMAP4: hwmod data: Add timer
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH 4/8] OMAP4: hwmod data: Add DSS, DISPC, DSI1&2, RFBI, HDMI and VENC
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH 2/8] OMAP4: hwmod data: Add McSPI
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH 1/8] OMAP4: hwmod data: Add hwspinlock
  • From: Benoit Cousson <b-cousson@xxxxxx>
• [PATCH 0/8] OMAP4: hwmod data: Add a bunch of IPs
  • From: Benoit Cousson <b-cousson@xxxxxx>
• Re: [PATCH v2] OMAP: PM: DMA: Enable runtime pm
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• RE: [RESEND][PATCH v2] OMAP: DSS: Adding two APIs for panel-taal: check_timings and set_timings
  • From: "Janorkar, Mayuresh" <mayur@xxxxxx>
• [PATCH] omap3: Adding vdd_sdi regulator supply to OMAP3EVM
  • From: Bryan Wu <bryan.wu@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] omap4: 4430sdp: drop ehci support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 1/2] omap4: 4430sdp: drop ehci support
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [3/4] OMAP: DSS2: Adding macro for DISPC_DIVISOR register
  • From: Raghuveer Murthy <x0075817@xxxxxx>
• [PATCH 4/6 v8] OMAP4430: hwmod data: Adding USBOTG
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 3/6 v8] AM35xx: hwmod data: Add USBOTG
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 5/6 v8] OMAP2+: musb: hwmod adaptation for musb registration
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 6/6 v8] usb: musb: Using runtime pm APIs for musb.
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 2/6 v8] OMAP3xxx: hwmod data: Add USBOTG
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 1/6 v8] OMAP2430: hwmod data: Add USBOTG
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 0/6 v8]usb: musb: hwmod and runtime pm support for musb
  • From: Hema HK <hemahk@xxxxxx>
• [6/7 v4] usb: otg: TWL6030 Save the last event in otg_transceiver
  • From: Hema HK <hemahk@xxxxxx>
• [4/7 v4] usb: otg: OMAP4430: Introducing suspend function for power management
  • From: Hema HK <hemahk@xxxxxx>
• [7/7 v4] usb: musb: OMAP4430: Fix usb device detection if connected during boot
  • From: Hema HK <hemahk@xxxxxx>
• [3/7 v4] usb: otg: OMAP4430: Add phy_suspend function pointer to twl4030_usb_data
  • From: Hema HK <hemahk@xxxxxx>
• [5/7 v4] usb: otg: TWL6030: Introduce the twl6030_phy_suspend function.
  • From: Hema HK <hemahk@xxxxxx>
• [2/7 v4] usb: otg: Remove one unnecessary I2C read request.
  • From: Hema HK <hemahk@xxxxxx>
• [1/7 v4] usb: otg: enable regulator only on cable/device connect
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 4/5] OMAP: clock: bail out early if arch_clock functions not implemented
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 5/5] OMAP2+: clock: remove the DPLL rate tolerance code
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 3/5] OMAP2xxx: clock: fix interface clocks and clockdomains for modules in the WKUP domain
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/5] OMAP2xxx: clock: fix low-frequency oscillator clock rate
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/5] OMAP: clock: miscellaneous fixes and dead code removal for 2.6.39
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/5] OMAP2xxx: clock: fix parents for L3-derived clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: omap3evm does not boot after 2.6.38-rc1
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• linux-next: manual merge of the omap_dss2 tree with the omap tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• linux-next: manual merge of the omap_dss2 tree with the omap tree
  • From: Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx>
• Re: omap3evm does not boot after 2.6.38-rc1
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/6] trivial compile warning fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] omap4: 4430sdp: drop ehci support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/6] CBUS Third try
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH v2 5/7] omap: dpll: Enable all OMAP3/4 dpll autoidle late at boot
  • From: Paul Walmsley <paul@xxxxxxxxx>
• omap3evm does not boot after 2.6.38-rc1
  • From: Sung Hee Park <shpark7@xxxxxxxxxxxx>
• RE: [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 6/6 v2] cbus: retu: set pm_power_off to NULL when removing retu
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 4/6] cbus: retu: replace EXPORT_SYMBOL with EXPORT_SYMBOL_GPL
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 5/6 v2] cbus: retu: tabify retu initialization
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 3/6] cbus: retu: headset: don't save pdev pointer
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/6] cbus: retu: pass the child device pointer to all retu functions
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/6] cbus: retu: wdt: save dev in retu_wdt_dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/6] CBUS Third try
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 6/6] cbus: retu: set pm_power_off to NULL when removing retu
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 5/6] cbus: retu: tabify retu initialization
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 0/6] trivial compile warning fixes
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v2] OMAP: PM: DMA: Enable runtime pm
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH 6/6] cbus: retu: set pm_power_off to NULL when removing retu
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 5/6] cbus: retu: tabify retu initialization
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/6] cbus: retu: wdt: save dev in retu_wdt_dev
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 4/6] cbus: retu: replace EXPORT_SYMBOL with EXPORT_SYMBOL_GPL
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 3/6] cbus: retu: headset: don't save pdev pointer
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/6] cbus: retu: pass the child device pointer to all retu functions
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/6] CBUS Second try
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH v3 2/2] OMAP: IOMMU: add support to callback during fault handling
  • From: David Cohen <dacohen@xxxxxxxxx>
• [PATCH v3 1/2] OMAP2+: IOMMU: don't print fault warning on specific layer
  • From: David Cohen <dacohen@xxxxxxxxx>
• [PATCH v3 0/2] OMAP: IOMMU fault callback support
  • From: David Cohen <dacohen@xxxxxxxxx>
• Re: [PATCH 0/2] Add recommended bpp for omap dss2 generic dpi panels
  • From: Daniel Morsing <daniel.morsing@xxxxxxxxx>
• Re: [PATCH 00/15] More cleanups
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: twl4030: Hwmon Driver for TWL4030 MADC
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 00/15] More cleanups
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/2] hwmon: twl4030: Hwmon Driver for TWL4030 MADC
  • From: "J, KEERTHY" <j-keerthy@xxxxxx>
• Re: [PATCH 0/6] trivial compile warning fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap: Move omap2_check_revision and omap_sram_init out of map_io
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] TI816X: Update to use init_early
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: Avoid discarding sections that might have SMP_ON_UP fixups
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: [PATCH 0/4] OMAP4: DSS2: Adding fclk support for DPI interface
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v2 1/1] OMAP: IOMMU: add support to callback during fault handling
  • From: David Cohen <dacohen@xxxxxxxxx>
• Re: [PATCH 2/2] hwmon: twl4030: Hwmon Driver for TWL4030 MADC
  • From: Guenter Roeck <guenter.roeck@xxxxxxxxxxxx>
• Re: [PATCH 0/2] Add recommended bpp for omap dss2 generic dpi panels
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• RE: [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption
  • From: Catalin Marinas <catalin.marinas@xxxxxxx>
• Re: [3/4] OMAP: DSS2: Adding macro for DISPC_DIVISOR register
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 0/2] Add recommended bpp for omap dss2 generic dpi panels
  • From: Daniel Morsing <daniel.morsing@xxxxxxxxx>
• Re: [2/4] OMAP: DSS2: Renaming register macro DISPC_DIVISOR(ch)
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 2/2] omap3: devkit8000: Add and use 4.3 inch display
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• Re: [PATCH 0/2] Add recommended bpp for omap dss2 generic dpi panels
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v2] OMAP: PM: DMA: Enable runtime pm
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: [PATCH 0/2] Add recommended bpp for omap dss2 generic dpi panels
  • From: Daniel Morsing <daniel.morsing@xxxxxxxxx>
• Re: [RESEND][PATCH v2] OMAP: DSS: Adding two APIs for panel-taal: check_timings and set_timings
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• RE: [4/7 v2] usb: otg: OMAP4430: Add phy_suspend function pointer to
  • From: Hema Kalliguddi <hemahk@xxxxxx>
• RE: [PATCH 0/3] OMAP2+ hwmod fixes
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [RESEND][PATCH v2] OMAP: DSS: Adding two APIs for panel-taal: check_timings and set_timings
  • From: Mayuresh Janorkar <mayur@xxxxxx>
• Re: [PATCH 0/2] Add recommended bpp for omap dss2 generic dpi panels
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 0/3] OMAP2+ hwmod fixes
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 2/2] OMAP: PM: implement devices wakeup latency constraints APIs
  • From: "Pihet-XID, Jean" <j-pihet@xxxxxx>
• [PATCH v10 02/11] OMAP2420: hwmod data: add dmtimer
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• Re: [PATCH 6/6 v7] usb: musb: Using runtime pm APIs for musb.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• [PATCH v10 07/11] OMAP2+: dmtimer: convert to platform devices
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v10 08/11] OMAP: dmtimer: platform driver
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v10 06/11] OMAP1: dmtimer: conversion to platform devices
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v10 09/11] OMAP: dmtimer: switch-over to platform device driver
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v10 05/11] OMAP4: hwmod data: add dmtimer
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v10 11/11] OMAP: dmtimer: add timeout to low-level routines
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v10 03/11] OMAP2430: hwmod data: add dmtimer
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v10 10/11] OMAP: dmtimer: pm_runtime support
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v10 04/11] OMAP3: hwmod data: add dmtimer
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v10 01/11] OMAP2+: dmtimer: add device names to flck nodes
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH v10 00/11] dmtimer adaptation to platform_driver
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH 2/2] hwmon: twl4030: Hwmon Driver for TWL4030 MADC
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 1/2] mfd: twl4030: Driver for twl4030 madc module
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 0/2] twl4030-madc driver
  • From: Keerthy <j-keerthy@xxxxxx>
• Re: [PATCH 5/6] OMAP2+: musb: hwmod adaptation for musb registration
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL
  • From: "Gulati, Shweta" <shweta.gulati@xxxxxx>
• RE: [PATCH 1/5] ARM: smp: Select local timers vs dummy timer support runtime
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 1/3] OMAP2+: hwmod: Avoid setup if clock lookup failed
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• RE: [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH 0/2] twl4030-madc driver
  • From: "J, KEERTHY" <j-keerthy@xxxxxx>
• Re: [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• [PATCH 1/2] mfd: twl4030: Driver for twl4030 madc module
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 0/6 v7]usb: musb: hwmod and runtime pm support for musb
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 1/6 v7] OMAP2430: hwmod data: Add USBOTG
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 2/2] hwmon: twl4030: Hwmon Driver for TWL4030 MADC
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH 2/6 v7] OMAP3xxx: hwmod data: Add USBOTG
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 6/6 v7] usb: musb: Using runtime pm APIs for musb.
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 5/6] OMAP2+: musb: hwmod adaptation for musb registration
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 4/6 v7] OMAP4430: hwmod data: Adding USBOTG
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 3/6 v7] AM35xx: hwmod data: Add USBOTG
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH 0/2] twl4030-madc driver
  • From: Keerthy <j-keerthy@xxxxxx>
• RE: [RFC 0/3] Use clknames to reference parent/bypass/ref clks
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [PATCH v2 0/2] Fix/Clean regulator consumer mapping for 3430sdp
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• RE:
  • From: Hema Kalliguddi <hemahk@xxxxxx>
• [PATCH 3/3] OMAP2+: hwmod: Do not break iterator fn's if one fails
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 0/3] OMAP2+ hwmod fixes
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 2/3] OMAP2+: hwmod: Fix what _init_clock returns
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH 1/3] OMAP2+: hwmod: Avoid setup if clock lookup failed
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: your mail
  • From: Hema Kalliguddi <hemahk@xxxxxx>
• [PATCH]: usb: musb: AM35x: moving internal phy functions out of usb_musb.c file
  • From: Hema HK <hemahk@xxxxxx>
• [PATCH] OMAP2+: PM: Warn users of sleep_while_idle if !CONFIG_CPU_IDLE
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re:
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [4/7 v3] usb: otg: OMAP4430: Add phy_suspend function pointer to twl4030_usb_data
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: your mail
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: your mail
  • From: Felipe Balbi <balbi@xxxxxx>
• [no subject]
  • From: Hema HK <hemahk@xxxxxx>
• Re: [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL
  • From: "Gulati, Shweta" <shweta.gulati@xxxxxx>
• [no subject]
  • From: Hema HK <hemahk@xxxxxx>
• [6/7 v3] usb: otg: TWL6030 Save the last event in otg_transceiver
  • From: Hema HK <hemahk@xxxxxx>
• [7/7 v3] usb: musb: OMAP4430: Fix usb device detection if connected during boot
  • From: Hema HK <hemahk@xxxxxx>
• [4/7 v3] usb: otg: OMAP4430: Add phy_suspend function pointer to twl4030_usb_data
  • From: Hema HK <hemahk@xxxxxx>
• [5/7 v3] usb: otg: TWL6030: Introduce the twl6030_phy_suspend function.
  • From: Hema HK <hemahk@xxxxxx>
• [3/7 v3] usb: otg: OMAP4430: Introducing suspend function for power management
  • From: Hema HK <hemahk@xxxxxx>
• [2/7 v3] usb: otg: Remove one unnecessary I2C read request.
  • From: Hema HK <hemahk@xxxxxx>
• [1/7 v3] usb: otg: enable regulator only on cable/device connect
  • From: Hema HK <hemahk@xxxxxx>
• Re: [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [4/7 v2] usb: otg: OMAP4430: Add phy_suspend function pointer to
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 1/2] omap4: 4430sdp: drop ehci support
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/2] omap4: 4430sdp: drop ehci support
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH 2/2] omap4: 4430sdp: mux GPIO_157 to safe mode
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• RE: [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [PATCH 4/5 v6] OMAP2+: musb: HWMOD adaptation for musb. registration
  • From: Hema Kalliguddi <hemahk@xxxxxx>
• Re: [PATCH] usb: ehci-omap: add support for TLL mode on OMAP4
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 2/2] OMAP: PM: implement devices wakeup latency constraints APIs
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• RE: [PATCH] usb: ehci-omap: add support for TLL mode on OMAP4
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: OMAP3 & USB NFS root
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: OMAP3 & USB NFS root
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] omap4: usb: explicitly configure MUSB pads
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v9 10/11] OMAP: dmtimer: pm_runtime support
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH] usb: ehci-omap: add support for TLL mode on OMAP4
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] usb: ehci-omap: add support for TLL mode on OMAP4
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• [PATCH] omap4: usb: explicitly configure MUSB pads
  • From: Anand Gadiyar <gadiyar@xxxxxx>
• Re: OMAP3 & USB NFS root
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: OMAP3 & USB NFS root
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: OMAP3 & USB NFS root
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• RE: [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: Omapdss Managers confusion
  • From: Robert Wörle <rwoerle@xxxxxxxxx>
• Re: [PATCH] arm: omap3beagle: init musb default role by Kconfig
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 0/4] OMAP4: DSS2: Adding fclk support for DPI interface
  • From: Raghuveer Murthy <x0075817@xxxxxx>
• Re: Pandaboard boot problem
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• [PATCH 1/3] OMAP3 PM: Deny clock gating only for safe state
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCH 3/3] OMAP36xx PM: Updated C state latencies for OMAP3630
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCH 2/3] OMAP3 PM: Update only enabled C states
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• [PATCH 0/3] OMAP3 PM: CPUIdle fixes
  • From: Vishwanath BS <vishwanath.bs@xxxxxx>
• Re: [PATCH] arm: omap3beagle: init musb default role by Kconfig
  • From: Bob Liu <lliubbo@xxxxxxxxx>
• Omapdss Managers confusion
  • From: Robert Wörle <rwoerle@xxxxxxxxx>
• Re: OMAP3 & USB NFS root
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] arm: omap3beagle: init musb default role by Kconfig
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: OMAP3 & USB NFS root
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 03/11] OMAP2xxx: clock: add clockfw autoidle support for APLLs
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 04/11] OMAP2+: clock: comment that osc_ck/osc_sys_ck should use clockfw autoidle control
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 11/11] OMAP2/3: PM: remove manual CM_AUTOIDLE bit setting in mach-omap2/pm*xx.c
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 09/11] OMAP2430: clock: use autoidle clkops for all autoidle-controllable interface clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 07/11] OMAP2420: clock: use autoidle clkops for all autoidle-controllable interface clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 10/11] OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocks
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 08/11] OMAP2430/3xxx: clock: add modem clock autoidle support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 06/11] OMAP2420: clock: add sdrc_ick
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 05/11] OMAP2+: clock: add interface clock type code with autoidle support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 02/11] OMAP2: clock: add DPLL autoidle support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 01/11] OMAP2+: clock: disable autoidle on all clocks during clock init
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: OMAP3 & USB NFS root
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• [PATCH 3/3] OMAP4: Enable Turbo and Nitro OPP for OMAP4
  • From: Shweta Gulati <shweta.gulati@xxxxxx>
• [PATCH 2/3] OMAP2+: Replace Voltage values with Macros.
  • From: Shweta Gulati <shweta.gulati@xxxxxx>
• [PATCH 1/3] OMAP4: Revise MPU Voltage rail values.
  • From: Shweta Gulati <shweta.gulati@xxxxxx>
• [PATCH 0/3]: Update OPP Table and Voltage Rail Values
  • From: Shweta Gulati <shweta.gulati@xxxxxx>
• Re: [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL
  • From: "Gulati, Shweta" <shweta.gulati@xxxxxx>
• Re: [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL
  • From: "Gulati, Shweta" <shweta.gulati@xxxxxx>
• RE: [5/7 v2] usb: otg: TWL6030: Introduce the twl6030_phy_suspend function.
  • From: Hema Kalliguddi <hemahk@xxxxxx>
• RE: [4/7 v2] usb: otg: OMAP4430: Add phy_suspend function pointer to
  • From: Hema Kalliguddi <hemahk@xxxxxx>
• [PATCH v11 18/18] OMAP2,3: DSS2: Get DSS IRQ from platform device
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• RE: [PATCH v9 09/11 RESEND] OMAP: dmtimer: switch-over to platform device driver
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [v3,1/3] OMAP2PLUS: DSS2: Add OMAP4 Kconfig support
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• [PATCH v2] i2c-omap: Double clear of ARDY status in IRQ handler
  • From: Keerthy <j-keerthy@xxxxxx>
• [PATCH v4 1/3] OMAP2PLUS: DSS2: Add OMAP4 Kconfig support
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• [PATCH v4 1/3] OMAP2PLUS: DSS2: Add OMAP4 Kconfig support
  • From: Sumit Semwal <sumit.semwal@xxxxxx>
• Re: [PATCH] i2c-omap: Double clear of ARDY status in IRQ handler
  • From: "J, KEERTHY" <j-keerthy@xxxxxx>
• Re: [PATCH] arm: omap3beagle: init musb default role by Kconfig
  • From: Bob Liu <lliubbo@xxxxxxxxx>
• Re: [PATCH v5 3/5] OMAP4: hwmod data: add mailbox data
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH 2/6] ARM: pm: add generic CPU suspend/resume support
  • From: Colin Cross <ccross@xxxxxxxxxx>
• Re: [PATCH] i2c-omap: Double clear of ARDY status in IRQ handler
  • From: Ben Dooks <ben-i2c@xxxxxxxxx>
• Re: [PATCH 4/8] ARM: etm: Allow range selection
  • From: Arve Hjønnevåg <arve@xxxxxxxxxxx>
• Re: [PATCH v5 3/5] OMAP4: hwmod data: add mailbox data
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v5 3/5] OMAP4: hwmod data: add mailbox data
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH v5 0/5] omap: mailbox: hwmod support
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: [PATCH 6/6] arm: omap2: clksel: fix compile warning
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 2/6] ARM: pm: add generic CPU suspend/resume support
  • From: Colin Cross <ccross@xxxxxxxxxx>
• Re: [PATCH v7 3/4] TI816X: Create board support and enable build for TI816X EVM
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 3/4] TI816X: Create board support and enable build for TI816X EVM
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v7 0/4] Introduce support for TI816X processor series
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v7 0/4] Introduce support for TI816X processor series
  • From: Kevin Hilman <khilman@xxxxxx>
• [PATCH v7 4/4] TI816X: Add low level debug support
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH v7 3/4] TI816X: Create board support and enable build for TI816X EVM
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH v7 2/4] TI816X: Update common OMAP machine specific sources
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH v7 1/4] TI816X: Update common omap platform files
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH v7 0/4] Introduce support for TI816X processor series
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• Re: [PATCH v9 10/11] OMAP: dmtimer: pm_runtime support
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v9 09/11 RESEND] OMAP: dmtimer: switch-over to platform device driver
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] OMAP: Fix Memory Leaks in Smartreflex driver
  • From: Kevin Hilman <khilman@xxxxxx>
• RE: [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• RE: [PATCHv2] omap2/3: dmtimer: Enable autoidle
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCHv2] omap2/3: dmtimer: Enable autoidle
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v4 0/5] ARM: omap[34]: Thumb-2 compatibility fixes
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] omap: dmtimer: Enable autoidle
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 4/5 v6] OMAP2+: musb: HWMOD adaptation for musb. registration
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] omap2plus: smartreflex: remove sr debug directory in omap_sr_remove()
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCHv2] omap2/3: dmtimer: Enable autoidle
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• [PATCHv2] omap2/3: dmtimer: Enable autoidle
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• Re: [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH v2 1/1] OMAP: IOMMU: add support to callback during fault handling
  • From: David Cohen <dacohen@xxxxxxxxx>
• Re: [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()
  • From: David Cohen <dacohen@xxxxxxxxx>
• Re: [PATCH v2 1/1] OMAP: IOMMU: add support to callback during fault handling
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()
  • From: David Cohen <dacohen@xxxxxxxxx>
• Re: [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()
  • From: David Cohen <dacohen@xxxxxxxxx>
• Re: [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• [PATCH v2 1/1] OMAP: IOMMU: add support to callback during fault handling
  • From: David Cohen <dacohen@xxxxxxxxx>
• [PATCH v2 0/1] OMAP: IOMMU fault callback support
  • From: David Cohen <dacohen@xxxxxxxxx>
• Re: [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()
  • From: David Cohen <dacohen@xxxxxxxxx>
• Re: [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()
  • From: David Cohen <dacohen@xxxxxxxxx>
• Re: [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: [PATCH 4/8] ARM: etm: Allow range selection
  • From: Alexander Shishkin <virtuoso@xxxxxxxxx>
• Re: [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 2/2] OMAP: PM: implement devices wakeup latency constraints APIs
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()
  • From: David Cohen <dacohen@xxxxxxxxx>
• Re: [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH 0/2] IOMMU fault callback support
  • From: David Cohen <dacohen@xxxxxxxxx>
• [PATCH 2/2] OMAP: IOMMU: add support to callback during fault handling
  • From: David Cohen <dacohen@xxxxxxxxx>
• [PATCH 0/2] IOMMU fault callback support
  • From: David Cohen <dacohen@xxxxxxxxx>
• [PATCH 1/2] OMAP2+: IOMMU: change OMAP2+ error message to dev_dbg()
  • From: David Cohen <dacohen@xxxxxxxxx>
• Re: [PATCH v2] OMAP: IOMMU: add missing function declaration
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCHv5 0/3] Introduce the /proc/socinfo and use it to export OMAP data
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: OMAP: DSS2: Common IRQ handler for all OMAPs
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH 6/6] arm: omap2: clksel: fix compile warning
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 5/6] arm: omap2: irq: fix compile warning:
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 4/6] arm: omap1: fix a bunch of section mismatches
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 3/6] arm: omap1: fix compile warnings
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/6] arm: omap1: fix compile warning
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 0/6] trivial compile warning fixes
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/6] arm: omap: i2c: fix compile warning
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: hwmod: multi-omap: disabling smartreflex on AM3517
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: OMAP: DSS2: Common IRQ handler for all OMAPs
  • From: archit taneja <archit@xxxxxx>
• RE: [PATCH] omap: dmtimer: Enable autoidle
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• RE: [PATCH] omap: dmtimer: Enable autoidle
  • From: <Tero.Kristo@xxxxxxxxx>
• Re: [5/7 v2] usb: otg: TWL6030: Introduce the twl6030_phy_suspend function.
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [4/7 v2] usb: otg: OMAP4430: Add phy_suspend function pointer to
  • From: Sergei Shtylyov <sshtylyov@xxxxxxxxxx>
• Re: [PATCH resend] video: omap24xxcam: Fix compilation
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH resend] video: omap24xxcam: Fix compilation
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH resend] video: omap24xxcam: Fix compilation
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH resend] video: omap24xxcam: Fix compilation
  • From: Thomas Weber <weber@xxxxxxxxxxxxx>
• hwmod: multi-omap: disabling smartreflex on AM3517
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCH resend] video: omap24xxcam: Fix compilation
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH resend] video: omap24xxcam: Fix compilation
  • From: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
• Re: OMAP: DSS2: Common IRQ handler for all OMAPs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH resend] video: omap24xxcam: Fix compilation
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH resend] video: omap24xxcam: Fix compilation
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v2] OMAP: IOMMU: add missing function declaration
  • From: David Cohen <dacohen@xxxxxxxxx>
• Re: OMAP: DSS2: Common IRQ handler for all OMAPs
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH] arm: omap3beagle: init musb default role by Kconfig
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH 2/6] ARM: pm: add generic CPU suspend/resume support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: OMAP: DSS2: Common IRQ handler for all OMAPs
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 2/2] omap3: flash: use pr_err instead of printk
  • From: Sanjeev Premi <premi@xxxxxx>
• [PATCH 1/2] omap3: fix minor typos
  • From: Sanjeev Premi <premi@xxxxxx>
• [PATCH 0/2] omap3: minor clean-up in flash related code
  • From: Sanjeev Premi <premi@xxxxxx>
• Re: [PATCH 2/6] ARM: pm: add generic CPU suspend/resume support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: OMAP: DSS2: Common IRQ handler for all OMAPs
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v4 0/5] ARM: omap[34]: Thumb-2 compatibility fixes
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: OMAP: DSS2: Common IRQ handler for all OMAPs
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• Re: OMAP: DSS2: Common IRQ handler for all OMAPs
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• RE: [PATCH] omap: dmtimer: Enable autoidle
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• RE: [PATCH] omap: dmtimer: Enable autoidle
  • From: <Tero.Kristo@xxxxxxxxx>
• [6/7 v2] usb: otg: TWL6030 Save the last event in otg_transceiver
  • From: Hema HK <hemahk@xxxxxx>
• [7/7 v2] usb: musb: OMAP4430: Fix usb device detection if connected during boot
  • From: Hema HK <hemahk@xxxxxx>
• [5/7 v2] usb: otg: TWL6030: Introduce the twl6030_phy_suspend function.
  • From: Hema HK <hemahk@xxxxxx>
• [4/7 v2] usb: otg: OMAP4430: Add phy_suspend function pointer to
  • From: Hema HK <hemahk@xxxxxx>
• [3/7 v2] usb: otg: OMAP4430: Introducing suspend function for power management
  • From: Hema HK <hemahk@xxxxxx>
• [2/7 v2] usb: otg: Remove one unnecessary I2C read request.
  • From: Hema HK <hemahk@xxxxxx>
• [1/7 v2] usb: otg: enable regulator only on cable/device connect
  • From: Hema HK <hemahk@xxxxxx>
• RE: [PATCH 0/3]OMAP4: Keypad support
  • From: Shubhrajyoti Datta <shubhrajyoti@xxxxxx>
• RE: [PATCH 2/2] OMAP: PM: implement devices wakeup latency constraints APIs
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• RE: [PATCH] omap: dmtimer: Enable autoidle
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• RE: [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: OMAP: DSS2: Common IRQ handler for all OMAPs
  • From: archit taneja <archit@xxxxxx>
• RE: [PATCH] omap: dmtimer: Enable autoidle
  • From: "DebBarma, Tarun Kanti" <tarun.kanti@xxxxxx>
• Re: [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption
  • From: Andrei Warkentin <andreiw@xxxxxxxxxxxx>
• [PATCH v9 09/11 RESEND] OMAP: dmtimer: switch-over to platform device driver
  • From: Tarun Kanti DebBarma <tarun.kanti@xxxxxx>
• [PATCH 10/15] cbus: retu: pwrbutton: save device pointer on our structure
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH] arm: omap3beagle: init musb default role by Kconfig
  • From: Bob Liu <lliubbo@xxxxxxxxx>
• Re: OMAP: DSS2: Common IRQ handler for all OMAPs
  • From: archit taneja <archit@xxxxxx>
• [PATCH 09/15] cbus: retu: search and replace
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 08/15] cbus: retu: introduce internal read/write functions
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 07/15] cbus: retu: use the devid from platform_data
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 06/15] arm: omap: pass Retu ID via platform_data
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 05/15] arm: omap: cbus: add IDs for Retu and Tahvo
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 04/15] cbus: retu: drop unused PFX macro
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 03/15] cbus: retu: drop the unnecessary spinlock_t
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 02/15] cbus: retu: replace BUG_ON with WARN
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 01/15] cbus: retu: drop retu_get_status
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 00/15] More cleanups
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: OMAP: DSS2: Common IRQ handler for all OMAPs
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 4/5 v6] OMAP2+: musb: HWMOD adaptation for musb. registration
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: OMAP: DSS2: Common IRQ handler for all OMAPs
  • From: archit taneja <archit@xxxxxx>
• Re: OMAP: DSS2: Common IRQ handler for all OMAPs
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 7/7] usb: musb: OMAP4430: Fix usb device detection if connected during boot
  • From: Hema Kalliguddi <hemahk@xxxxxx>
• Re: OMAP: DSS2: Common IRQ handler for all OMAPs
  • From: archit taneja <archit@xxxxxx>
• RE: [PATCH] omap: dmtimer: Enable autoidle
  • From: <Tero.Kristo@xxxxxxxxx>
• [PATCH v2 5/5] OMAP: hsmmc: Enable MMC4 and MMC5 on OMAP4 platforms
  • From: Panduranga Mallireddy <panduranga_mallireddy@xxxxxx>
• [PATCH v2 4/5] omap: panda: add mmc5/wl1271 device support
  • From: Panduranga Mallireddy <panduranga_mallireddy@xxxxxx>
• [PATCH v2 0/5] Panda: Support for WLAN on WL127x
  • From: Panduranga Mallireddy <panduranga_mallireddy@xxxxxx>
• [PATCH v2 3/5] omap: panda: add fixed regulator device for wlan
  • From: Panduranga Mallireddy <panduranga_mallireddy@xxxxxx>
• [PATCH v2 1/5] omap: panda: wlan board muxing
  • From: Panduranga Mallireddy <panduranga_mallireddy@xxxxxx>
• [PATCH v2 2/5] omap: select REGULATOR_FIXED_VOLTAGE by default for panda and sdp4430
  • From: Panduranga Mallireddy <panduranga_mallireddy@xxxxxx>
• [PATCH] OMAP: Fix Memory Leaks in Smartreflex driver
  • From: Shweta Gulati <shweta.gulati@xxxxxx>
• Re: [PATCH 0/4] RETU fetch IRQ via struct resource
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: OMAP: DSS2: Common IRQ handler for all OMAPs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: OMAP: DSS2: Common IRQ handler for all OMAPs
  • From: archit taneja <archit@xxxxxx>
• [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL
  • From: Shweta Gulati <shweta.gulati@xxxxxx>
• Re: OMAP: DSS2: Common IRQ handler for all OMAPs
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: OMAP: DSS2: Common IRQ handler for all OMAPs
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• RE: [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH v2 0/2] OMAP: omap_device: API to modify SYSCONFIG register
  • From: "ABRAHAM, KISHON VIJAY" <kishon@xxxxxx>
• RE: [PATCH 4/5 v6] OMAP2+: musb: HWMOD adaptation for musb. registration
  • From: Hema Kalliguddi <hemahk@xxxxxx>
• [PATCH 2/8] ARM: etm: Don't limit tracing to only non-secure code.
  • From: Arve Hjønnevåg <arve@xxxxxxxxxxx>
• [PATCH 5/8] ARM: etm: Configure data tracing
  • From: Arve Hjønnevåg <arve@xxxxxxxxxxx>
• [PATCH 6/8] ARM: etm: Add some missing locks and error checks
  • From: Arve Hjønnevåg <arve@xxxxxxxxxxx>
• [PATCH 4/8] ARM: etm: Allow range selection
  • From: Arve Hjønnevåg <arve@xxxxxxxxxxx>
• [PATCH 8/8] ARM: etm: Support multiple ETMs/PTMs.
  • From: Arve Hjønnevåg <arve@xxxxxxxxxxx>
• [PATCH 7/8] ARM: etm: Return the entire trace buffer if it is empty after reset
  • From: Arve Hjønnevåg <arve@xxxxxxxxxxx>
• [PATCH 3/8] ARM: etm: Don't try to clear the buffer full status after reading the buffer
  • From: Arve Hjønnevåg <arve@xxxxxxxxxxx>
• [PATCH 1/8] ARM: etm: Don't require clock control
  • From: Arve Hjønnevåg <arve@xxxxxxxxxxx>
• Re: [PATCH] omap2plus: smartreflex: remove sr debug directory in omap_sr_remove()
  • From: "Sawant, Anand" <sawant@xxxxxx>
• Re: [PATCH] i2c-omap: Double clear of ARDY status in IRQ handler
  • From: "J, KEERTHY" <j-keerthy@xxxxxx>
• Re: OMAP: DSS2: Common IRQ handler for all OMAPs
  • From: archit taneja <archit@xxxxxx>
• Re: [PATCH 1/5] ARM: smp: Select local timers vs dummy timer support runtime
  • From: David Brown <davidb@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] ARM: smp: Select local timers vs dummy timer support runtime
  • From: David Brown <davidb@xxxxxxxxxxx>
• Re: [PATCH 2/6] ARM: pm: add generic CPU suspend/resume support
  • From: Colin Cross <ccross@xxxxxxxxxx>
• Re: [PATCH 5/5 v6] usb: musb: Using runtime pm APIs for musb.
  • From: "Kalliguddi, Hema" <hemahk@xxxxxx>
• Re: [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] omap: Move omap2_check_revision and omap_sram_init out of map_io
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 2/6] ARM: pm: add generic CPU suspend/resume support
  • From: Colin Cross <ccross@xxxxxxxxxx>
• RE: [PATCH RESEND v6 2/4] TI816X: Update common OMAP machine specific sources
  • From: "Pedanekar, Hemant" <hemantp@xxxxxx>
• Re: [PATCH 5/5 v6] usb: musb: Using runtime pm APIs for musb.
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 4/5 v6] OMAP2+: musb: HWMOD adaptation for musb. registration
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] omap3: pm: Use exported set_cr() instead of a custom one.
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] i2c-omap: Double clear of ARDY status in IRQ handler
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2 2/2] OMAP4: add clk32kg data to omap4panda and blaze board file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] regulator: twl: add clk32kg to twl-regulator
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] omap: Move omap2_check_revision and omap_sram_init out of map_io
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP2: use early init hook
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH RESEND v6 0/4] Introduce support for TI816X processor series
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] omap: dmtimer: Enable autoidle
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH RESEND v6 2/4] TI816X: Update common OMAP machine specific sources
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 0/4] RETU fetch IRQ via struct resource
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 0/5] ARM: omap[34]: Thumb-2 compatibility fixes
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [RESEND][PATCH] ARM: OMAP: Add chip id recognition for OMAP4 ES2.1 and ES2.2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: McBSP: Remove unused audio macros in mcbsp.h
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: Fix Memory Leaks in Smartreflex driver.
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCHv2] arm: mach-omap2: smartreflex: fix another memory leak
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH] arm: mach-omap2: smartreflex: fix another memory leak
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH V4] OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH v2] OMAP: PM: DMA: Enable runtime pm
  • From: Kevin Hilman <khilman@xxxxxx>
• Re: [PATCH 1/2] OMAP2420: mailbox: fix IVA vs DSP IRQ numbering
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] regulator: twl: add clk32kg to twl-regulator
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/5] omap4: Remove 'FIXME: omap44xx_sram_init not implemented'
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/5] omap2plus: omap4: Set NR_CPU to 2 instead of default 4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption
  • From: Andrei Warkentin <andreiw@xxxxxxxxxxxx>
• Re: [PATCH 2/5] omap4: Enable ARM local timers with OMAP4430 es1.0 exception
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v4 0/5] ARM: omap[34]: Thumb-2 compatibility fixes
  • From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
• Re: [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption
  • From: Andrei Warkentin <andreiw@xxxxxxxxxxxx>
• Re: [PATCH 0/4] RETU fetch IRQ via struct resource
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v3 2/3] OMAP4: hwmod data: add DSS DISPC DSI1,2 RFBI HDMI VENC
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• Re: [PATCH v10 18/18] OMAP2,3: DSS2: Get DSS IRQ from platform device
  • From: "Semwal, Sumit" <sumit.semwal@xxxxxx>
• RE: [PATCH v2 5/7] omap: dpll: Enable all OMAP3/4 dpll autoidle late at boot
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH v2 4/7] omap: dpll: Add allow_idle/deny_idle support for all DPLL's
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH v2 3/7] omap: clock: Add allow_idle/deny_idle support in clkops
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH 1/7] omap: clock: Check for enable/disable ops support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH 3/3] OMAP4: clockdomain: Add wkup/sleep dependency support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] OMAP4: clockdomain: Remove pr_errs' stating unsupported wkdep
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v9 05/11] OMAP4: hwmod data: add dmtimer
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• [PATCH] omap: dmtimer: Enable autoidle
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• Re: [PATCH 0/4] OMAP4: DSS2: Adding fclk support for DPI interface
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH 6/6] ARM: pm: allow generic sleep code to be used with SMP CPU idle
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [RESEND][PATCH] ARM: OMAP: Add chip id recognition for OMAP4 ES2.1 and ES2.2
  • From: Nishant Kamat <nskamat@xxxxxx>
• Re: [PATCH v4 0/5] ARM: omap[34]: Thumb-2 compatibility fixes
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: [PATCH v3 2/4] OMAP4: hwmod: add entries for DMIC driver
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH 08/13] OMAP3: cpufreq driver changes for DVFS support
  • From: "Kahn, Gery" <geryk@xxxxxx>
• Re: [PATCH v6 03/10] omap3: Add function to register omap3isp platform device structure
  • From: David Cohen <dacohen@xxxxxxxxx>
• Re: [PATCH v6 04/10] omap2: Fix camera resources for multiomap
  • From: David Cohen <dacohen@xxxxxxxxx>
• [PATCH RESEND v6 4/4] TI816X: Add low level debug support
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH RESEND v6 3/4] TI816X: Create board support and enable build for TI816X EVM
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH RESEND v6 2/4] TI816X: Update common OMAP machine specific sources
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH RESEND v6 1/4] TI816X: Update common omap platform files
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• [PATCH RESEND v6 0/4] Introduce support for TI816X processor series
  • From: Hemant Pedanekar <hemantp@xxxxxx>
• Re: [PATCH v5 3/5] OMAP4: hwmod data: add mailbox data
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: [PATCH v4 0/5] ARM: omap[34]: Thumb-2 compatibility fixes
  • From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
• Re: [PATCH v2 06/13] OMAP4: hwmod data: Add McBSP
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: Pandaboard boot problem
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• Re: OMAP: DSS2: Common IRQ handler for all OMAPs
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: OMAP: DSS2: Common IRQ handler for all OMAPs
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v10 18/18] OMAP2,3: DSS2: Get DSS IRQ from platform device
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: OMAP3 & USB NFS root
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: Pandaboard boot problem
  • From: Jean Pihet <jean.pihet@xxxxxxxxxxxxxx>
• Re: OMAP3 & USB NFS root
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxx>
• Re: [PATCH v6 04/10] omap2: Fix camera resources for multiomap
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: OMAP3 & USB NFS root
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH 08/13] OMAP3: cpufreq driver changes for DVFS support
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• Re: [PATCH] omap iommu: print module name on error messages
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH v6 04/10] omap2: Fix camera resources for multiomap
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 07/10] omap3isp: CCP2/CSI2 receivers
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 07/10] omap3isp: CCP2/CSI2 receivers
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 04/10] omap2: Fix camera resources for multiomap
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 03/10] omap3: Add function to register omap3isp platform device structure
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v4 0/5] ARM: omap[34]: Thumb-2 compatibility fixes
  • From: Dave Martin <dave.martin@xxxxxxxxxx>
• Re: [PATCH v6 03/10] omap3: Add function to register omap3isp platform device structure
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH 08/13] OMAP3: cpufreq driver changes for DVFS support
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [PATCH v6 02/10] omap3: Remove unusued ISP CBUFF resource
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• Re: [PATCH v6 00/10] OMAP3 ISP driver
  • From: Hans Verkuil <hansverk@xxxxxxxxx>
• RE: [PATCH 08/13] OMAP3: cpufreq driver changes for DVFS support
  • From: Vishwanath Sripathy <vishwanath.bs@xxxxxx>
• Re: [PATCH v6 07/10] omap3isp: CCP2/CSI2 receivers
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 07/10] omap3isp: CCP2/CSI2 receivers
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH v6 04/10] omap2: Fix camera resources for multiomap
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v2 7/7] omap4: dpll: Enable auto gate control for all MX postdividers
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v6 03/10] omap3: Add function to register omap3isp platform device structure
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v2 5/7] omap: dpll: Enable all OMAP3/4 dpll autoidle late at boot
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [PATCH v6 02/10] omap3: Remove unusued ISP CBUFF resource
  • From: Felipe Balbi <balbi@xxxxxx>
• RE: [PATCH v2 4/7] omap: dpll: Add allow_idle/deny_idle support for all DPLL's
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [PATCH v2 3/7] omap: clock: Add allow_idle/deny_idle support in clkops
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v6 03/10] omap3: Add function to register omap3isp platform device structure
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v6 02/10] omap3: Remove unusued ISP CBUFF resource
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v6 01/10] ARM: OMAP3: Update Camera ISP definitions for OMAP3630
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v6 06/10] omap3isp: Video devices and buffers queue
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v6 09/10] omap3isp: Statistics
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v6 10/10] omap3isp: Kconfig and Makefile
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v6 07/10] omap3isp: CCP2/CSI2 receivers
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v6 04/10] omap2: Fix camera resources for multiomap
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v6 00/10] OMAP3 ISP driver
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• RE: [PATCH 1/7] omap: clock: Check for enable/disable ops support
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [PATCH 3/3] OMAP4: clockdomain: Add wkup/sleep dependency support
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH] OMAP4: clockdomain: Remove pr_errs' stating unsupported wkdep
  • From: Rajendra Nayak <rnayak@xxxxxx>
• Re: [RFC/PATCH 1/3] OMAP: IOMMU: Add generic IOMMU errors code
  • From: David Cohen <dacohen@xxxxxxxxx>
• Re: [PATCH] OMAP: IOMMU: add missing function declaration
  • From: David Cohen <dacohen@xxxxxxxxx>
• Re: [PATCH 7/7] usb: musb: OMAP4430: Fix usb device detection if connected during boot
  • From: Felipe Balbi <balbi@xxxxxx>
• Re: [PATCH] i2c-omap: Double clear of ARDY status in IRQ handler
  • From: "J, KEERTHY" <j-keerthy@xxxxxx>
• Re: [PATCH 08/13] OMAP3: cpufreq driver changes for DVFS support
  • From: "Kahn, Gery" <geryk@xxxxxx>
• Re: How to enable dvfs in omap.
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: How to enable dvfs in omap.
  • From: "Kahn, Gery" <geryk@xxxxxx>
• Re: [PATCH] OMAP: Fix Memory Leaks in Smartreflex driver.
  • From: "Gulati, Shweta" <shweta.gulati@xxxxxx>
• Re: [PATCH 1/5] omap: panda: wlan board muxing
  • From: "panduranga" <x0125717@xxxxxx>
• Re: [PATCH 1/5] omap: panda: wlan board muxing
  • From: Ohad Ben-Cohen <ohad@xxxxxxxxxx>
• [PATCH 5/5] OMAP: hsmmc: Enable MMC4 and MMC5 on OMAP4 platforms
  • From: panduranga_mallireddy@xxxxxx
• [PATCH 1/5] omap: panda: wlan board muxing
  • From: panduranga_mallireddy@xxxxxx
• [PATCH 2/5] omap: select REGULATOR_FIXED_VOLTAGE by default for panda and sdp4430
  • From: panduranga_mallireddy@xxxxxx
• [PATCH 3/5] omap: panda: add fixed regulator device for wlan
  • From: panduranga_mallireddy@xxxxxx
• [PATCH 4/5] omap: panda: add mmc5/wl1271 device support
  • From: panduranga_mallireddy@xxxxxx
• [PATCH 0/5] Panda: Support for WLAN on WL127x
  • From: panduranga_mallireddy@xxxxxx
• RE: [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• Re: [PATCH] OMAP: IOMMU: add missing function declaration
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [RFC/PATCH 1/3] OMAP: IOMMU: Add generic IOMMU errors code
  • From: "Varadarajan, Charulatha" <charu@xxxxxx>
• Re: [PATCH] mcspi: Add support for GPIO chip select lines
  • From: Ben Gamari <bgamari.foss@xxxxxxxxx>
• Re: [PATCH 6/6] ARM: pm: allow generic sleep code to be used with SMP CPU idle
  • From: Colin Cross <ccross@xxxxxxxxxx>
• Re: How to enable dvfs in omap.
  • From: Nishanth Menon <nm@xxxxxx>
• Re: How to enable dvfs in omap.
  • From: Nishanth Menon <nm@xxxxxx>
• Re: How to enable dvfs in omap.
  • From: Koen Kooi <koen@xxxxxxxxxxxxxxxxxxxxx>
• Re: How to enable dvfs in omap.
  • From: "Kahn, Gery" <geryk@xxxxxx>
• Re: [PATCH v2 0/7] clock/dpll autoidle support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 7/7] omap4: dpll: Enable auto gate control for all MX postdividers
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 6/7] omap4: dpll: Add dpll api to control GATE_CTRL
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 5/7] omap: dpll: Enable all OMAP3/4 dpll autoidle late at boot
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 4/7] omap: dpll: Add allow_idle/deny_idle support for all DPLL's
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 3/7] omap: clock: Add allow_idle/deny_idle support in clkops
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 3/7] omap: clock: Add allow_idle/deny_idle support in clkops
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 2/7] omap3: dpll: Populate clkops for dpll1_ck
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 3/5] ARM: l2x0: Errata fix for flush by Way operation can cause data corruption
  • From: Andrei Warkentin <andreiw@xxxxxxxxxxxx>
• Re: [PATCH 1/7] omap: clock: Check for enable/disable ops support
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH 3/3] OMAP4: clockdomain: Add wkup/sleep dependency support
  • From: Paul Walmsley <paul@xxxxxxxxx>