This patch has changes to update the C state latencies for OMAP3630 and disables the useless C-States, keeping only the optimized ones with their corresponding measured latencies. Only 4 C-states are kept instead of 7 C-States: * C1 . MPU WFI clock gated + Core autogating * C3 . MPU CSWR + Core inactive * C5 . MPU CSWR + Core CSWR * C7 . MPU OFF + Core OFF Thanks to Nicole Chaloub<n-chalhoub@xxxxxx> and Vincent Bour <v-bour@xxxxxx> for their investigation. Tested on ZOOM3 board using latest pm branch. Signed-off-by: Vishwanath BS <vishwanath.bs@xxxxxx> --- arch/arm/mach-omap2/board-3630sdp.c | 19 +++++++++++++++++++ arch/arm/mach-omap2/board-zoom.c | 19 +++++++++++++++++++ 2 files changed, 38 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 6264564..8d05fc9 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -25,6 +25,24 @@ #include "board-flash.h" #include "mux.h" #include "sdram-hynix-h8mbx00u0mer-0em.h" +#include "pm.h" + +static struct cpuidle_params omap36xx_cpuidle_params_table[] = { + /* C1 */ + {1, 74, 78, 152}, + /* C2 */ + {0, 165, 90, 255}, + /* C3 */ + {1, 163, 180, 345}, + /* C4 */ + {0, 2852, 605, 3457}, + /* C5 */ + {1, 800, 366, 2120}, + /* C6 */ + {0, 4080, 801, 4881}, + /* C7 */ + {1, 4300, 8794, 159000}, +}; #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) @@ -212,6 +230,7 @@ static void __init omap_sdp_init(void) board_flash_init(sdp_flash_partitions, chip_sel_sdp); enable_board_wakeup_source(); usb_ehci_init(&ehci_pdata); + omap3_pm_init_cpuidle(omap36xx_cpuidle_params_table); } MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index e26754c..6bd364a --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -30,6 +30,24 @@ #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "sdram-hynix-h8mbx00u0mer-0em.h" +#include "pm.h" + +static struct cpuidle_params omap36xx_cpuidle_params_table[] = { + /* C1 */ + {1, 74, 78, 152}, + /* C2 */ + {0, 165, 90, 255}, + /* C3 */ + {1, 163, 180, 345}, + /* C4 */ + {0, 2852, 605, 3457}, + /* C5 */ + {1, 800, 366, 2120}, + /* C6 */ + {0, 4080, 801, 4881}, + /* C7 */ + {1, 4300, 8794, 159000}, +}; #define ZOOM3_EHCI_RESET_GPIO 64 @@ -126,6 +144,7 @@ static void __init omap_zoom_init(void) usb_ehci_init(&ehci_pdata); } + omap3_pm_init_cpuidle(omap36xx_cpuidle_params_table); board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS); zoom_debugboard_init(); -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html