Re: [PATCH v10 18/18] OMAP2,3: DSS2: Get DSS IRQ from platform device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Mon, 2011-01-24 at 11:52 +0530, ext Sumit Semwal wrote:
> From: Senthilvadivu Guruswamy <svadivu@xxxxxx>
> 
> DSS IRQ number can be obtained from platform_get_irq().  This API in turn
> picks the right IRQ number belonging to HW IP from the hwmod database.
> So hardcoding of IRQ number could be removed.
> 
> Reviewed-by: Paul Walmsley <paul@xxxxxxxxx>
> Reviewed-by: Kevin Hilman <khilman@xxxxxx>
> Tested-by: Kevin Hilman <khilman@xxxxxx>
> Signed-off-by: Senthilvadivu Guruswamy <svadivu@xxxxxx>
> Signed-off-by: Sumit Semwal <sumit.semwal@xxxxxx>
> ---
>  drivers/video/omap2/dss/dss.c |   21 ++++++++++++++-------
>  1 files changed, 14 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c
> index 4d7a816..f9390b4 100644
> --- a/drivers/video/omap2/dss/dss.c
> +++ b/drivers/video/omap2/dss/dss.c
> @@ -563,7 +563,7 @@ void dss_set_dac_pwrdn_bgz(bool enable)
>  
>  static int dss_init(bool skip_init)
>  {
> -	int r;
> +	int r, dss_irq;
>  	u32 rev;
>  	struct resource *dss_mem;
>  
> @@ -609,11 +609,18 @@ static int dss_init(bool skip_init)
>  	REG_FLD_MOD(DSS_CONTROL, 0, 2, 2);	/* venc clock mode = normal */
>  #endif
>  
> -	r = request_irq(INT_24XX_DSS_IRQ,
> -			cpu_is_omap24xx()
> -			? dss_irq_handler_omap2
> -			: dss_irq_handler_omap3,
> -			0, "OMAP DSS", NULL);
> +	dss_irq = platform_get_irq(dss.pdev, 0);
> +	if (dss_irq < 0) {
> +		DSSERR("omap2 dss: platform_get_irq failed\n");
> +		r = -ENODEV;
> +		goto fail1;
> +	}
> +
> +	r = request_irq(dss_irq,
> +		cpu_is_omap24xx()
> +		? dss_irq_handler_omap2
> +		: dss_irq_handler_omap3,
> +		0, "OMAP DSS", NULL);
>  
>  	if (r < 0) {
>  		DSSERR("omap2 dss: request_irq failed\n");
> @@ -641,7 +648,7 @@ static int dss_init(bool skip_init)
>  	return 0;
>  
>  fail2:
> -	free_irq(INT_24XX_DSS_IRQ, NULL);
> +	free_irq(dss_irq, NULL);

You change this free_irq, as you should, but you missed another a few
lines later.

Archit fixes it in his "OMAP: DSS2: Common IRQ handler for all OMAPs"
patch silently, but I think it should be fixed here already, as the
patches haven't been pulled to anywhere yet.

Perhaps you could use the same method as Archit used, create a new field
"irq" in the dss struct which can be used in the dss_exit's free_irq
call.

 Tomi


--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux