Hello Samuel, Any comments on this patch? Regards, Keerthy On Wed, Feb 16, 2011 at 6:26 PM, Keerthy <j-keerthy@xxxxxx> wrote: > Introducing a driver for MADC on TWL4030 powerIC. MADC stands for monitoring > ADC. This driver monitors the real time conversion of analog signals like > battery temperature, battery type, battery level etc. > > Signed-off-by: Keerthy <j-keerthy@xxxxxx> > > --- > The previous discussion concluded in keeping the generic ADC > functionality and the hwmon separate. The discussion can be found here: > > http://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg41805.html > > drivers/mfd/Kconfig | 10 + > drivers/mfd/Makefile | 1 + > drivers/mfd/twl4030-madc.c | 723 ++++++++++++++++++++++++++++++++++++++ > include/linux/i2c/twl4030-madc.h | 132 +++++++ > 4 files changed, 866 insertions(+), 0 deletions(-) > create mode 100644 drivers/mfd/twl4030-madc.c > create mode 100644 include/linux/i2c/twl4030-madc.h > > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index fd01836..7d36882 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -167,6 +167,16 @@ config TWL4030_CORE > high speed USB OTG transceiver, an audio codec (on most > versions) and many other features. > > +config TWL4030_MADC > + tristate "Texas Instruments TWL4030 MADC" > + depends on TWL4030_CORE > + help > + This driver provides support for triton TWL4030-MADC. The > + driver supports both RT and SW conversion methods. > + > + This driver can be built as part of kernel or can be built > + as a module. > + > config TWL4030_POWER > bool "Support power resources on TWL4030 family chips" > depends on TWL4030_CORE && ARM > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > index a54e2c7..2922cc2 100644 > --- a/drivers/mfd/Makefile > +++ b/drivers/mfd/Makefile > @@ -37,6 +37,7 @@ obj-$(CONFIG_TPS6507X) += tps6507x.o > obj-$(CONFIG_MENELAUS) += menelaus.o > > obj-$(CONFIG_TWL4030_CORE) += twl-core.o twl4030-irq.o twl6030-irq.o > +obj-$(CONFIG_TWL4030_MADC) += twl4030-madc.o > obj-$(CONFIG_TWL4030_POWER) += twl4030-power.o > obj-$(CONFIG_TWL4030_CODEC) += twl4030-codec.o > obj-$(CONFIG_TWL6030_PWM) += twl6030-pwm.o > diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c > new file mode 100644 > index 0000000..711bfff > --- /dev/null > +++ b/drivers/mfd/twl4030-madc.c > @@ -0,0 +1,723 @@ > +/* > + * > + * TWL4030 MADC module driver-This driver monitors the real time > + * conversion of analog signals like battery temperature, > + * battery type, battery level etc. > + * > + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ > + * J Keerthy <j-keerthy@xxxxxx> > + * > + * Based on twl4030-madc.c > + * Copyright (C) 2008 Nokia Corporation > + * Mikko Ylinen <mikko.k.ylinen@xxxxxxxxx> > + * > + * Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA > + * 02110-1301 USA > + * > + */ > + > +#include <linux/interrupt.h> > +#include <linux/delay.h> > +#include <linux/platform_device.h> > +#include <linux/slab.h> > +#include <linux/i2c/twl.h> > +#include <linux/i2c/twl4030-madc.h> > + > +/* > + * struct twl4030_madc_data - a container for madc info > + * @dev - pointer to device structure for madc > + * @lock - mutex protecting this data structire > + * @requests - Array of request struct corresponding to SW1, SW2 and RT > + * @imr - Interrupt mask register of MADC > + * @isr - Interrupt status register of MADC > + */ > +struct twl4030_madc_data { > + struct device *dev; > + struct mutex lock; /* mutex protecting this data structire */ > + struct twl4030_madc_request requests[TWL4030_MADC_NUM_METHODS]; > + int imr; > + int isr; > +}; > + > +static struct twl4030_madc_data *twl4030_madc; > + > +struct twl4030_prescale_divider_ratios { > + s16 numerator; > + s16 denominator; > +}; > + > +static const struct twl4030_prescale_divider_ratios > +twl4030_divider_ratios[16] = { > + {1, 1}, /* CHANNEL 0 No Prescaler */ > + {1, 1}, /* CHANNEL 1 No Prescaler */ > + {6, 10}, /* CHANNEL 2 */ > + {6, 10}, /* CHANNEL 3 */ > + {6, 10}, /* CHANNEL 4 */ > + {6, 10}, /* CHANNEL 5 */ > + {6, 10}, /* CHANNEL 6 */ > + {6, 10}, /* CHANNEL 7 */ > + {3, 14}, /* CHANNEL 8 */ > + {1, 3}, /* CHANNEL 9 */ > + {1, 1}, /* CHANNEL 10 NA */ > + {15, 100}, /* CHANNEL 11 */ > + {1, 4}, /* CHANNEL 12 */ > + {1, 1}, /* CHANNEL 13 NA */ > + {1, 1}, /* CHANNEL 14 NA */ > + {5, 11}, /* CHANNEL 15 */ > +}; > + > +/* > + * Structure containing the registers > + * of different conversion methods supported by MADC. > + * Hardware or RT real time conversion request intiated by external host > + * processor for RT Signal conversions. > + * External host processors can also request for non RT converions > + * SW1 and SW2 software conversions also called asynchronous or GPC request. > + */ > +static > +const struct twl4030_madc_conversion_method twl4030_conversion_methods[] = { > + [TWL4030_MADC_RT] = { > + .sel = TWL4030_MADC_RTSELECT_LSB, > + .avg = TWL4030_MADC_RTAVERAGE_LSB, > + .rbase = TWL4030_MADC_RTCH0_LSB, > + }, > + [TWL4030_MADC_SW1] = { > + .sel = TWL4030_MADC_SW1SELECT_LSB, > + .avg = TWL4030_MADC_SW1AVERAGE_LSB, > + .rbase = TWL4030_MADC_GPCH0_LSB, > + .ctrl = TWL4030_MADC_CTRL_SW1, > + }, > + [TWL4030_MADC_SW2] = { > + .sel = TWL4030_MADC_SW2SELECT_LSB, > + .avg = TWL4030_MADC_SW2AVERAGE_LSB, > + .rbase = TWL4030_MADC_GPCH0_LSB, > + .ctrl = TWL4030_MADC_CTRL_SW2, > + }, > +}; > + > +/* > + * Function to read a particular channel value. > + * @madc - pointer to struct twl4030_madc_data struct > + * @reg - lsb of ADC Channel > + * If the i2c read fails it returns an error else returns 0. > + */ > +static int twl4030_madc_channel_raw_read(struct twl4030_madc_data *madc, u8 reg) > +{ > + u8 msb, lsb; > + int ret; > + /* > + * For each ADC channel, we have MSB and LSB register pair. MSB address > + * is always LSB address+1. reg parameter is the addr of LSB register > + */ > + ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &msb, reg + 1); > + if (ret) { > + dev_err(madc->dev, "unable to read MSB register 0x%X\n", > + reg + 1); > + return ret; > + } > + ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &lsb, reg); > + if (ret) { > + dev_err(madc->dev, "unable to read LSB register 0x%X\n", reg); > + return ret; > + } > + > + return (int)(((msb << 8) | lsb) >> 6); > +} > + > +/* > + * Function to read channel values > + * @madc - pointer to twl4030_madc_data struct > + * @reg_base - Base address of the first channel > + * @Channel - 16 bit bitmap. If the bit is set channel value is read > + * @buf - The channel values are stored here. if read fails error > + * value is stored > + * Returns the number of successfully read channels. > + */ > +static int twl4030_madc_read_channels(struct twl4030_madc_data *madc, > + u8 reg_base, u16 channels, int *buf) > +{ > + int count = 0, count_req = 0; > + u8 reg, i; > + > + for (i = 0; i < TWL4030_MADC_MAX_CHANNELS; i++) { > + if (channels & (1 << i)) { > + reg = reg_base + 2 * i; > + buf[i] = twl4030_madc_channel_raw_read(madc, reg); > + if (buf[i] < 0) { > + dev_err(madc->dev, > + "Unable to read register 0x%X\n", reg); > + count_req++; > + } else { > + count++; > + /* Analog Input (V) = conv_result * > + * step_size / R > + * conv_result = decimal value > + * of 10-bit conversion > + * result > + * step size = 1.5 / (2 ^ 10 -1) > + * R = Prescaler ratio for input > + * channels > + * Result given in mV hence multiplied > + * by 1000 > + */ > + buf[i] = (buf[i] * 3 * 1000 * > + twl4030_divider_ratios[i].denominator) > + / (2 * 1023 * > + twl4030_divider_ratios[i].numerator); > + } > + } > + > + } > + if (count_req) > + dev_dbg(madc->dev, "%d channel conversion failed\n", count_req); > + > + return count; > +} > + > +/* > + * Enables irq. > + * @madc - pointer to twl4030_madc_data struct > + * @id - irq number to be enabled > + * can take one of TWL4030_MADC_RT, TWL4030_MADC_SW1, TWL4030_MADC_SW2 > + * corresponding to RT, SW1, SW2 conversion requests. > + * If the i2c read fails it returns an error else returns 0. > + */ > +static int twl4030_madc_enable_irq(struct twl4030_madc_data *madc, u8 id) > +{ > + u8 val; > + int ret; > + > + ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &val, madc->imr); > + if (ret) { > + dev_err(madc->dev, "unable to read imr register 0x%X\n", > + madc->imr); > + return ret; > + } > + val &= ~(1 << id); > + ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, val, madc->imr); > + if (ret) { > + dev_err(madc->dev, > + "unable to write imr register 0x%X\n", madc->imr); > + return ret; > + > + } > + > + return 0; > +} > + > +/* > + * Disables irq. > + * @madc - pointer to twl4030_madc_data struct > + * @id - irq number to be disabled > + * can take one of TWL4030_MADC_RT, TWL4030_MADC_SW1, TWL4030_MADC_SW2 > + * corresponding to RT, SW1, SW2 conversion requests. > + * Returns error if i2c read/write fails. > + */ > +static int twl4030_madc_disable_irq(struct twl4030_madc_data *madc, u8 id) > +{ > + u8 val; > + int ret; > + > + ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &val, madc->imr); > + if (ret) { > + dev_err(madc->dev, "unable to read imr register 0x%X\n", > + madc->imr); > + return ret; > + } > + val |= (1 << id); > + ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, val, madc->imr); > + if (ret) { > + dev_err(madc->dev, > + "unable to write imr register 0x%X\n", madc->imr); > + return ret; > + } > + > + return 0; > +} > + > +static irqreturn_t twl4030_madc_threaded_irq_handler(int irq, void *_madc) > +{ > + struct twl4030_madc_data *madc = _madc; > + const struct twl4030_madc_conversion_method *method; > + u8 isr_val, imr_val; > + int i, len, ret; > + struct twl4030_madc_request *r; > + > + ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &isr_val, madc->isr); > + if (ret) { > + dev_err(madc->dev, "unable to read isr register 0x%X\n", > + madc->isr); > + goto err_i2c; > + } > + ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &imr_val, madc->imr); > + if (ret) { > + dev_err(madc->dev, "unable to read imr register 0x%X\n", > + madc->imr); > + goto err_i2c; > + } > + isr_val &= ~imr_val; > + for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) { > + if (!(isr_val & (1 << i))) > + continue; > + ret = twl4030_madc_disable_irq(madc, i); > + if (ret < 0) > + dev_dbg(madc->dev, "Disable interrupt failed%d\n", i); > + madc->requests[i].result_pending = 1; > + } > + mutex_lock(&madc->lock); > + for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) { > + r = &madc->requests[i]; > + /* No pending results for this method, move to next one */ > + if (!r->result_pending) > + continue; > + method = &twl4030_conversion_methods[r->method]; > + /* Read results */ > + len = twl4030_madc_read_channels(madc, method->rbase, > + r->channels, r->rbuf); > + /* Return results to caller */ > + if (r->func_cb != NULL) { > + r->func_cb(len, r->channels, r->rbuf); > + r->func_cb = NULL; > + } > + /* Free request */ > + r->result_pending = 0; > + r->active = 0; > + } > + mutex_unlock(&madc->lock); > + > + return IRQ_HANDLED; > + > +err_i2c: > + /* > + * In case of error check whichever is active > + * and service the same. > + */ > + mutex_lock(&madc->lock); > + for (i = 0; i < TWL4030_MADC_NUM_METHODS; i++) { > + r = &madc->requests[i]; > + if (r->active == 0) > + continue; > + method = &twl4030_conversion_methods[r->method]; > + /* Read results */ > + len = twl4030_madc_read_channels(madc, method->rbase, > + r->channels, r->rbuf); > + /* Return results to caller */ > + if (r->func_cb != NULL) { > + r->func_cb(len, r->channels, r->rbuf); > + r->func_cb = NULL; > + } > + /* Free request */ > + r->result_pending = 0; > + r->active = 0; > + } > + mutex_unlock(&madc->lock); > + > + return IRQ_HANDLED; > +} > + > +static int twl4030_madc_set_irq(struct twl4030_madc_data *madc, > + struct twl4030_madc_request *req) > +{ > + struct twl4030_madc_request *p; > + int ret; > + > + p = &madc->requests[req->method]; > + memcpy(p, req, sizeof(*req)); > + ret = twl4030_madc_enable_irq(madc, req->method); > + if (ret < 0) { > + dev_err(madc->dev, "enable irq failed!!\n"); > + return ret; > + } > + > + return 0; > +} > + > +/* > + * Function which enables the madc conversion > + * by writing to the control register. > + * @madc - pointer to twl4030_madc_data struct > + * @conv_method - can be TWL4030_MADC_RT, TWL4030_MADC_SW2, TWL4030_MADC_SW1 > + * corresponding to RT SW1 or SW2 conversion methods. > + * Returns 0 if succeeds else a negative error value > + */ > +static int twl4030_madc_start_conversion(struct twl4030_madc_data *madc, > + int conv_method) > +{ > + const struct twl4030_madc_conversion_method *method; > + int ret = 0; > + method = &twl4030_conversion_methods[conv_method]; > + switch (conv_method) { > + case TWL4030_MADC_SW1: > + case TWL4030_MADC_SW2: > + ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, > + TWL4030_MADC_SW_START, method->ctrl); > + if (ret) { > + dev_err(madc->dev, > + "unable to write ctrl register 0x%X\n", > + method->ctrl); > + return ret; > + } > + break; > + default: > + break; > + } > + > + return 0; > +} > + > +/* > + * Function that waits for conversion to be ready > + * @madc - pointer to twl4030_madc_data struct > + * @timeout_ms - timeout value in mili seconds > + * @status_reg - ctrl register > + * returns 0 if succeeds else a negative error value > + */ > +static int twl4030_madc_wait_conversion_ready(struct twl4030_madc_data *madc, > + unsigned int timeout_ms, > + u8 status_reg) > +{ > + unsigned long timeout; > + int ret; > + > + timeout = jiffies + msecs_to_jiffies(timeout_ms); > + do { > + u8 reg; > + > + ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, ®, status_reg); > + if (ret) { > + dev_err(madc->dev, > + "unable to read status register 0x%X\n", > + status_reg); > + return ret; > + } > + if (!(reg & TWL4030_MADC_BUSY) && (reg & TWL4030_MADC_EOC_SW)) > + return 0; > + usleep_range(500, 2000); > + } while (!time_after(jiffies, timeout)); > + dev_err(madc->dev, "conversion timeout!\n"); > + > + return -EAGAIN; > +} > + > +/* > + * An exported function which can be called from other kernel drivers. > + * @req twl4030_madc_request structure > + * req->rbuf will be filled with read values of channels based on the > + * channel index. If a particular channel reading fails there will > + * be a negative error value in the correspoding array element. > + * returns 0 if succeeds else error value > + */ > +int twl4030_madc_conversion(struct twl4030_madc_request *req) > +{ > + const struct twl4030_madc_conversion_method *method; > + u8 ch_msb, ch_lsb; > + int ret; > + > + if (!req) > + return -EINVAL; > + mutex_lock(&twl4030_madc->lock); > + if (req->method < TWL4030_MADC_RT || req->method > TWL4030_MADC_SW2) { > + ret = -EINVAL; > + goto out; > + } > + /* Do we have a conversion request ongoing */ > + if (twl4030_madc->requests[req->method].active) { > + ret = -EBUSY; > + goto out; > + } > + ch_msb = (req->channels >> 8) & 0xff; > + ch_lsb = req->channels & 0xff; > + method = &twl4030_conversion_methods[req->method]; > + /* Select channels to be converted */ > + ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, ch_msb, method->sel + 1); > + if (ret) { > + dev_err(twl4030_madc->dev, > + "unable to write sel register 0x%X\n", method->sel + 1); > + return ret; > + } > + ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, ch_lsb, method->sel); > + if (ret) { > + dev_err(twl4030_madc->dev, > + "unable to write sel register 0x%X\n", method->sel + 1); > + return ret; > + } > + /* Select averaging for all channels if do_avg is set */ > + if (req->do_avg) { > + ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, > + ch_msb, method->avg + 1); > + if (ret) { > + dev_err(twl4030_madc->dev, > + "unable to write avg register 0x%X\n", > + method->avg + 1); > + return ret; > + } > + ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, > + ch_lsb, method->avg); > + if (ret) { > + dev_err(twl4030_madc->dev, > + "unable to write sel reg 0x%X\n", > + method->sel + 1); > + return ret; > + } > + } > + if (req->type == TWL4030_MADC_IRQ_ONESHOT && req->func_cb != NULL) { > + ret = twl4030_madc_set_irq(twl4030_madc, req); > + if (ret < 0) > + goto out; > + ret = twl4030_madc_start_conversion(twl4030_madc, req->method); > + if (ret < 0) > + goto out; > + twl4030_madc->requests[req->method].active = 1; > + ret = 0; > + goto out; > + } > + /* With RT method we should not be here anymore */ > + if (req->method == TWL4030_MADC_RT) { > + ret = -EINVAL; > + goto out; > + } > + ret = twl4030_madc_start_conversion(twl4030_madc, req->method); > + if (ret < 0) > + goto out; > + twl4030_madc->requests[req->method].active = 1; > + /* Wait until conversion is ready (ctrl register returns EOC) */ > + ret = twl4030_madc_wait_conversion_ready(twl4030_madc, 5, method->ctrl); > + if (ret) { > + twl4030_madc->requests[req->method].active = 0; > + goto out; > + } > + ret = twl4030_madc_read_channels(twl4030_madc, method->rbase, > + req->channels, req->rbuf); > + twl4030_madc->requests[req->method].active = 0; > + > +out: > + mutex_unlock(&twl4030_madc->lock); > + > + return ret; > +} > +EXPORT_SYMBOL_GPL(twl4030_madc_conversion); > + > +/* > + * Return channel value > + * Or < 0 on failure. > + */ > +int twl4030_get_madc_conversion(int channel_no) > +{ > + struct twl4030_madc_request req; > + int temp = 0; > + int ret; > + > + req.channels = (1 << channel_no); > + req.method = TWL4030_MADC_SW2; > + req.active = 0; > + req.func_cb = NULL; > + ret = twl4030_madc_conversion(&req); > + if (ret < 0) > + return ret; > + if (req.rbuf[channel_no] > 0) > + temp = req.rbuf[channel_no]; > + > + return temp; > +} > +EXPORT_SYMBOL_GPL(twl4030_get_madc_conversion); > + > +/* > + * Function to enable or disable bias current for > + * main battery type reading or temperature sensing > + * @madc - pointer to twl4030_madc_data struct > + * @chan - can be one of the two values > + * TWL4030_BCI_ITHEN - Enables bias current for main battery type reading > + * TWL4030_BCI_TYPEN - Enables bias current for main battery temperature > + * sensing > + * @on - enable or disable chan. > + */ > +static int twl4030_madc_set_current_generator(struct twl4030_madc_data *madc, > + int chan, int on) > +{ > + int ret; > + u8 regval; > + > + ret = twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE, > + ®val, TWL4030_BCI_BCICTL1); > + if (ret) { > + dev_err(madc->dev, > + "unable to read BCICTL1 reg 0x%X", TWL4030_BCI_BCICTL1); > + return ret; > + } > + if (on) > + regval |= chan ? TWL4030_BCI_ITHEN : TWL4030_BCI_TYPEN; > + else > + regval &= chan ? ~TWL4030_BCI_ITHEN : ~TWL4030_BCI_TYPEN; > + ret = twl_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE, > + regval, TWL4030_BCI_BCICTL1); > + if (ret) { > + dev_err(madc->dev, > + "unable to write BCICTL1 reg 0x%X\n", > + TWL4030_BCI_BCICTL1); > + return ret; > + } > + > + return 0; > +} > + > +/* > + * Function that sets MADC software power on bit to enable MADC > + * @madc - pointer to twl4030_madc_data struct > + * @on - Enable or diable MADC software powen on bit. > + * returns error if i2c read/write fails else 0 > + */ > +static int twl4030_madc_set_power(struct twl4030_madc_data *madc, int on) > +{ > + u8 regval; > + int ret; > + > + ret = twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE, > + ®val, TWL4030_MADC_CTRL1); > + if (ret) { > + dev_err(madc->dev, > + "unable to read madc ctrl1 reg 0x%X\n", > + TWL4030_MADC_CTRL1); > + return ret; > + } > + if (on) > + regval |= TWL4030_MADC_MADCON; > + else > + regval &= ~TWL4030_MADC_MADCON; > + ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, regval, TWL4030_MADC_CTRL1); > + if (ret) { > + dev_err(madc->dev, > + "unable to write madc ctrl1 reg 0x%X\n", > + TWL4030_MADC_CTRL1); > + return ret; > + } > + > + return 0; > +} > + > +/* > + * Initialize MADC and request for threaded irq > + */ > +static int __devinit twl4030_madc_probe(struct platform_device *pdev) > +{ > + struct twl4030_madc_data *madc; > + struct twl4030_madc_platform_data *pdata = pdev->dev.platform_data; > + int ret; > + u8 regval; > + > + if (!pdata) { > + dev_dbg(&pdev->dev, "platform_data not available\n"); > + return -EINVAL; > + } > + madc = kzalloc(sizeof(*madc), GFP_KERNEL); > + if (!madc) > + return -ENOMEM; > + > + /* > + * Phoenix provides 2 interrupt lines. The first one is connected to > + * the OMAP. The other one can be connected to other processor such > + * as modem. Hence two separate ISR and IMR registers. > + */ > + madc->imr = (pdata->irq_line == 1) ? > + TWL4030_MADC_IMR1 : TWL4030_MADC_IMR2; > + madc->isr = (pdata->irq_line == 1) ? > + TWL4030_MADC_ISR1 : TWL4030_MADC_ISR2; > + ret = twl4030_madc_set_power(madc, 1); > + if (ret < 0) > + goto err_power; > + ret = twl4030_madc_set_current_generator(madc, 0, 1); > + if (ret < 0) > + goto err_current_generator; > + > + ret = twl_i2c_read_u8(TWL4030_MODULE_MAIN_CHARGE, > + ®val, TWL4030_BCI_BCICTL1); > + if (ret) { > + dev_err(&pdev->dev, > + "unable to read reg BCI CTL1 0x%X\n", > + TWL4030_BCI_BCICTL1); > + goto err_i2c; > + } > + regval |= TWL4030_BCI_MESBAT; > + ret = twl_i2c_write_u8(TWL4030_MODULE_MAIN_CHARGE, > + regval, TWL4030_BCI_BCICTL1); > + if (ret) { > + dev_err(&pdev->dev, > + "unable to write reg BCI Ctl1 0x%X\n", > + TWL4030_BCI_BCICTL1); > + goto err_i2c; > + } > + platform_set_drvdata(pdev, madc); > + mutex_init(&madc->lock); > + ret = request_threaded_irq(platform_get_irq(pdev, 0), NULL, > + twl4030_madc_threaded_irq_handler, > + IRQF_TRIGGER_RISING, "twl4030_madc", madc); > + if (ret) { > + dev_dbg(&pdev->dev, "could not request irq\n"); > + goto err_irq; > + } > + twl4030_madc = madc; > + return 0; > +err_irq: > + platform_set_drvdata(pdev, NULL); > +err_i2c: > + twl4030_madc_set_current_generator(madc, 0, 0); > +err_current_generator: > + twl4030_madc_set_power(madc, 0); > +err_power: > + kfree(madc); > + > + return ret; > +} > + > +static int __devexit twl4030_madc_remove(struct platform_device *pdev) > +{ > + struct twl4030_madc_data *madc = platform_get_drvdata(pdev); > + > + free_irq(platform_get_irq(pdev, 0), madc); > + platform_set_drvdata(pdev, NULL); > + twl4030_madc_set_current_generator(madc, 0, 0); > + twl4030_madc_set_power(madc, 0); > + kfree(madc); > + > + return 0; > +} > + > +static struct platform_driver twl4030_madc_driver = { > + .probe = twl4030_madc_probe, > + .remove = __exit_p(twl4030_madc_remove), > + .driver = { > + .name = "twl4030_madc", > + .owner = THIS_MODULE, > + }, > +}; > + > +static int __init twl4030_madc_init(void) > +{ > + return platform_driver_register(&twl4030_madc_driver); > +} > + > +module_init(twl4030_madc_init); > + > +static void __exit twl4030_madc_exit(void) > +{ > + platform_driver_unregister(&twl4030_madc_driver); > +} > + > +module_exit(twl4030_madc_exit); > + > +MODULE_DESCRIPTION("TWL4030 ADC driver"); > +MODULE_LICENSE("GPL"); > +MODULE_AUTHOR("J Keerthy"); > +MODULE_ALIAS("twl4030_madc"); > diff --git a/include/linux/i2c/twl4030-madc.h b/include/linux/i2c/twl4030-madc.h > new file mode 100644 > index 0000000..8685006 > --- /dev/null > +++ b/include/linux/i2c/twl4030-madc.h > @@ -0,0 +1,132 @@ > +/* > + * twl4030_madc.h - Header for TWL4030 MADC > + * > + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ > + * J Keerthy <j-keerthy@xxxxxx> > + * > + * This program is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License > + * version 2 as published by the Free Software Foundation. > + * > + * This program is distributed in the hope that it will be useful, but > + * WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU > + * General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA > + * 02110-1301 USA > + * > + */ > + > +#ifndef _TWL4030_MADC_H > +#define _TWL4030_MADC_H > + > +struct twl4030_madc_conversion_method { > + u8 sel; > + u8 avg; > + u8 rbase; > + u8 ctrl; > +}; > + > +#define TWL4030_MADC_MAX_CHANNELS 16 > + > + > +/* > + * twl4030_madc_request- madc request packet for channel conversion > + * @channels: 16 bit bitmap for individual channels > + * @do_avgP: sample the input channel for 4 consecutive cycles > + * @method: RT, SW1, SW2 > + * @type: Polling or interrupt based method > + */ > + > +struct twl4030_madc_request { > + u16 channels; /* 16 bit bitmap for individual channels */ > + u16 do_avg; /* sample the input channel for 4 consecutive cycles > + and provide the average of 4 conversions */ > + u16 method; /* RT, SW1, SW2 */ > + u16 type; /*polling or interrupt based */ > + bool active; > + bool result_pending; > + int rbuf[TWL4030_MADC_MAX_CHANNELS]; > + void (*func_cb)(int len, int channels, int *buf); > +}; > + > +enum conversion_methods { > + TWL4030_MADC_RT, > + TWL4030_MADC_SW1, > + TWL4030_MADC_SW2, > + TWL4030_MADC_NUM_METHODS > +}; > + > +enum sample_type { > + TWL4030_MADC_WAIT, > + TWL4030_MADC_IRQ_ONESHOT, > + TWL4030_MADC_IRQ_REARM > +}; > + > +#define TWL4030_MADC_CTRL1 0x00 > +#define TWL4030_MADC_CTRL2 0x01 > + > +#define TWL4030_MADC_RTSELECT_LSB 0x02 > +#define TWL4030_MADC_SW1SELECT_LSB 0x06 > +#define TWL4030_MADC_SW2SELECT_LSB 0x0A > + > +#define TWL4030_MADC_RTAVERAGE_LSB 0x04 > +#define TWL4030_MADC_SW1AVERAGE_LSB 0x08 > +#define TWL4030_MADC_SW2AVERAGE_LSB 0x0C > + > +#define TWL4030_MADC_CTRL_SW1 0x12 > +#define TWL4030_MADC_CTRL_SW2 0x13 > + > +#define TWL4030_MADC_RTCH0_LSB 0x17 > +#define TWL4030_MADC_GPCH0_LSB 0x37 > + > +#define TWL4030_MADC_MADCON (1 << 0) /* MADC power on */ > +#define TWL4030_MADC_BUSY (1 << 0) /* MADC busy */ > +/* MADC conversion completion */ > +#define TWL4030_MADC_EOC_SW (1 << 1) > +/* MADC SWx start conversion */ > +#define TWL4030_MADC_SW_START (1 << 5) > +#define TWL4030_MADC_ADCIN0 (1 << 0) > +#define TWL4030_MADC_ADCIN1 (1 << 1) > +#define TWL4030_MADC_ADCIN2 (1 << 2) > +#define TWL4030_MADC_ADCIN3 (1 << 3) > +#define TWL4030_MADC_ADCIN4 (1 << 4) > +#define TWL4030_MADC_ADCIN5 (1 << 5) > +#define TWL4030_MADC_ADCIN6 (1 << 6) > +#define TWL4030_MADC_ADCIN7 (1 << 7) > +#define TWL4030_MADC_ADCIN8 (1 << 8) > +#define TWL4030_MADC_ADCIN9 (1 << 9) > +#define TWL4030_MADC_ADCIN10 (1 << 10) > +#define TWL4030_MADC_ADCIN11 (1 << 11) > +#define TWL4030_MADC_ADCIN12 (1 << 12) > +#define TWL4030_MADC_ADCIN13 (1 << 13) > +#define TWL4030_MADC_ADCIN14 (1 << 14) > +#define TWL4030_MADC_ADCIN15 (1 << 15) > + > +/* Fixed channels */ > +#define TWL4030_MADC_BTEMP TWL4030_MADC_ADCIN1 > +#define TWL4030_MADC_VBUS TWL4030_MADC_ADCIN8 > +#define TWL4030_MADC_VBKB TWL4030_MADC_ADCIN9 > +#define TWL4030_MADC_ICHG TWL4030_MADC_ADCIN10 > +#define TWL4030_MADC_VCHG TWL4030_MADC_ADCIN11 > +#define TWL4030_MADC_VBAT TWL4030_MADC_ADCIN12 > + > +#define TWL4030_BCI_BCICTL1 0x23 > +#define TWL4030_BCI_MESBAT (1 << 1) > +#define TWL4030_BCI_TYPEN (1 << 4) > +#define TWL4030_BCI_ITHEN (1 << 3) > + > +struct twl4030_madc_user_parms { > + int channel; > + int average; > + int status; > + u16 result; > +}; > + > +int twl4030_madc_conversion(struct twl4030_madc_request *conv); > +int twl4030_get_madc_conversion(int channel_no); > +#endif > + > -- > 1.7.0.4 > > -- Regards and Thanks, Keerthy -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
