RE: [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for iclks, OMAP2xxx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> -----Original Message-----
> From: Paul Walmsley [mailto:paul@xxxxxxxxx]
> Sent: Thursday, February 17, 2011 4:35 AM
> To: Rajendra Nayak
> Cc: linux-omap@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [PATCH 00/11] OMAP2+: clock: add clockfw autoidle for
iclks, OMAP2xxx
>
> On Wed, 16 Feb 2011, Rajendra Nayak wrote:
>
> > Boot-tested on 3430sdp/4430sdp, with CONFIG_PM and with !CONFIG_PM.
> > suspend-offmode tested on 3430sdp and suspend-retmode on 4430sdp (with
> > some out-of-tree patches)
>
> Thanks, will add Tested-by:s.
>
> > Dynamic idle testing on 3430sdp showed me some very jerky debug
console
> > the moment a 'echo 1 > /debug/pm_debug/sleep_while_idle' is done. This
> > however seems to be the case even on 2.6.38-rc4 and not related to the
> > current patch series.
>
> Does enabling CONFIG_OMAP2_DSS resolve the problem you're seeing?

Maybe, will try it out. Thanks for the tip.

>
> > Will debug further, but seems to some 3430sdp specific issue, since
you
> > did not see it on Beagleboard and seems it is not seen on OMAP3 zoom's
> > either. Just out of curiosity, what dynamic-idle state where you able
to
> > achieve on Beagle?
>
> Full chip off.  I use omap2plus_defconfig, sometimes with
CONFIG_OMAP2_DSS
> depending on personal mood and what's being tested.  I boot to a shell
and
> run the commands at the end of this message (some of which are probably
> superfluous).

Ok, thanks.

>
>
> - Paul
>
>
> echo 1 > /debug/pm_debug/sleep_while_idle
> echo 1 > /debug/pm_debug/enable_off_mode
> echo 5 > /sys/devices/platform/omap/omap_uart.0/sleep_timeout
> echo 5 > /sys/devices/platform/omap/omap_uart.1/sleep_timeout
> echo 5 > /sys/devices/platform/omap/omap_uart.2/sleep_timeout
> echo enabled >
/sys/devices/platform/omap/omap_uart.0/tty/ttyO0/power/wakeup
> echo enabled >
/sys/devices/platform/omap/omap_uart.1/tty/ttyO1/power/wakeup
> echo enabled >
/sys/devices/platform/omap/omap_uart.2/tty/ttyO2/power/wakeup
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux