Added a name to address space belonging to SDMA and MPU facilitating
the driver to get the address space info by name. Added a revision
member inorder to facilitate the driver to differentiate between
mcbsp in different omap.
Also added a platform_get_irq in probe to get irq number by index since
from OMAP4, there will be a single irq line.
Signed-off-by: Benoit Cousson <b-cousson@xxxxxx>
Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
---
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 8 ++++++++
arch/arm/plat-omap/include/plat/mcbsp.h | 1 +
arch/arm/plat-omap/mcbsp.c | 4 ++++
3 files changed, 13 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index 84e795c..4ae8df3 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -24,6 +24,7 @@
#include <plat/cpu.h>
#include <plat/gpio.h>
#include <plat/dma.h>
+#include <plat/mcbsp.h>
#include "omap_hwmod_common_data.h"
@@ -2736,6 +2737,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_mcbsp_sysc = {
static struct omap_hwmod_class omap44xx_mcbsp_hwmod_class = {
.name = "mcbsp",
.sysc = &omap44xx_mcbsp_sysc,
+ .rev = MCBSP_CONFIG_TYPE4,
};
/* mcbsp1 */
@@ -2751,6 +2753,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp1_sdma_reqs[] = {
static struct omap_hwmod_addr_space omap44xx_mcbsp1_addrs[] = {
{
+ .name = "mpu",
.pa_start = 0x40122000,
.pa_end = 0x401220ff,
.flags = ADDR_TYPE_RT
@@ -2769,6 +2772,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1 = {
static struct omap_hwmod_addr_space omap44xx_mcbsp1_dma_addrs[] = {
{
+ .name = "dma",
.pa_start = 0x49022000,
.pa_end = 0x490220ff,
.flags = ADDR_TYPE_RT
@@ -2822,6 +2826,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp2_sdma_reqs[] = {
static struct omap_hwmod_addr_space omap44xx_mcbsp2_addrs[] = {
{
+ .name = "mpu",
.pa_start = 0x40124000,
.pa_end = 0x401240ff,
.flags = ADDR_TYPE_RT
@@ -2840,6 +2845,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2 = {
static struct omap_hwmod_addr_space omap44xx_mcbsp2_dma_addrs[] = {
{
+ .name = "dma",
.pa_start = 0x49024000,
.pa_end = 0x490240ff,
.flags = ADDR_TYPE_RT
@@ -2893,6 +2899,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp3_sdma_reqs[] = {
static struct omap_hwmod_addr_space omap44xx_mcbsp3_addrs[] = {
{
+ .name = "mpu",
.pa_start = 0x40126000,
.pa_end = 0x401260ff,
.flags = ADDR_TYPE_RT
@@ -2911,6 +2918,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3 = {
static struct omap_hwmod_addr_space omap44xx_mcbsp3_dma_addrs[] = {
{
+ .name = "dma",
.pa_start = 0x49026000,
.pa_end = 0x490260ff,
.flags = ADDR_TYPE_RT
diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index f084b6a..afcbb7b 100644
--- a/arch/arm/plat-omap/include/plat/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -39,6 +39,7 @@ static struct platform_device omap_mcbsp##port_nr = { \
#define MCBSP_CONFIG_TYPE2 0x2
#define MCBSP_CONFIG_TYPE3 0x3
+#define MCBSP_CONFIG_TYPE4 0x4
#define OMAP7XX_MCBSP1_BASE 0xfffb1000
#define OMAP7XX_MCBSP2_BASE 0xfffb1800
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 1b45446..57257e8 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -1839,6 +1839,10 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev)
mcbsp->tx_irq = platform_get_irq_byname(pdev, "tx");
mcbsp->rx_irq = platform_get_irq_byname(pdev, "rx");
+ /* From OMAP4 there will be a single irq line */
+ if (mcbsp->tx_irq == -ENXIO)
+ mcbsp->tx_irq = platform_get_irq(pdev, 0);
+
res = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
if (!res) {
dev_err(&pdev->dev, "%s:mcbsp%d has invalid rx DMA channel\n",
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
