Linux for Texus Instruments OMAP Processors

• Thread Index

• [patch 2.6.27-omap-git 4/4] use gpio_to_irq()
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.27-omap-git 3/4] remove omap_set_gpio_direction()
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.27-omap-git 2/4] use gpio_direction_input()
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.27-omap-git 1/4] remove omap_set_gpio_dataout() and omap_get_gpio_datain()
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.27-omap-git 0/4] start phasing out legacy GPIO calls
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 0/2] omap-keypad fixes for OMAP2
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 0/2] omap-keypad fixes for OMAP2
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 2/2] OMAP2: omap-keypad: Enable more than 6 rows
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 1/1] OMAP2: omap-keypad: interrupt disable fix
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: ARM: OMAP3: Fix get_irqnr_and_base to clear spurious interrupt bits
  • From: Rick Bronson <rick@xxxxxxx>
• Re: [PATCH] OMAP2 NAND: Fix __raw_readsl() length argument
  • From: "Juha Kuikka" <juha.kuikka@xxxxxxxxx>
• Re: [PATCH] OMAP2 NAND: Fix __raw_readsl() length argument
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [RESEND] [PATCH 2/3] [OMAPZOOM] OMAP3ISP: Fix Random System freeze on still capture
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• Re: [PATCH] OMAP2 NAND: Fix __raw_readsl() length argument
  • From: "Juha Kuikka" <juha.kuikka@xxxxxxxxx>
• [PATCH 3/3] [OMAPZOOM] OMAP3ISP: Don't drop clocks before MMU unmapping
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 2/3] [OMAPZOOM] OMAP3ISP: Fix Random System freeze on still capture
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 1/3] [OMAPZOOM] OMAP3ISP: Remove 10 ms delay in ccdc enable
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• Re: [PATCH] OMAP2 NAND: Fix __raw_readsl() length argument
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: ARM: OMAP3: Fix get_irqnr_and_base to clear spurious interrupt bits
  • From: "Felipe Contreras" <felipe.contreras@xxxxxxxxx>
• Re: ARM: OMAP3: Fix get_irqnr_and_base to clear spurious interrupt bits
  • From: "Nathan Monson" <nmonson@xxxxxxxxx>
• [PATCH] OMAP2 NAND: Fix __raw_readsl() length argument
  • From: "Juha Kuikka" <juha.kuikka@xxxxxxxxx>
• Re: [alsa-devel] [PATCH] alsa: add beagleboard SoC configuration.
  • From: Mark Brown <broonie@xxxxxxxxxxxxx>
• Re: [PATCH] alsa: add beagleboard SoC configuration.
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: ALSA sound on beagleboard
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: ALSA sound on beagleboard
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: dsp-bridge synch issues
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• Re: [PATCH] alsa: add beagleboard SoC configuration.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] alsa: add beagleboard SoC configuration.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: 32 kHz timer granularity when CONFIG_NO_HZ is enabled
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: ALSA sound on beagleboard
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: ARM: OMAP3: Fix get_irqnr_and_base to clear spurious interrupt bits
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: ARM: OMAP3: Fix get_irqnr_and_base to clear spurious interrupt bits
  • From: Rick Bronson <rick@xxxxxxx>
• Re: ALSA sound on beagleboard
  • From: Rick Bronson <rick@xxxxxxx>
• dsp-bridge synch issues
  • From: "Felipe Contreras" <felipe.contreras@xxxxxxxxx>
• Re: [PATCH] alsa: add beagleboard SoC configuration.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: ALSA sound on beagleboard
  • From: "Felipe Contreras" <felipe.contreras@xxxxxxxxx>
• Re: [PATCH] Fix bootup crash for LDP platform
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH] alsa: add beagleboard SoC configuration.
  • From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
• Re: [PATCH] Fix bootup crash for LDP platform
  • From: "Bryan Wu" <cooloney@xxxxxxxxxx>
• Re: ARM: OMAP3: Fix get_irqnr_and_base to clear spurious interrupt bits
  • From: "Felipe Contreras" <felipe.contreras@xxxxxxxxx>
• 32 kHz timer granularity when CONFIG_NO_HZ is enabled
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxx>
• Re: Problems compiling kernel
  • From: Ramón Finger Lilienthal <ramon@xxxxxxxxxxxxxxxx>
• [PATCH] OMAP3 DSS: Fixed FIFO buffer register field sizes
  • From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
• Using sys_ck for GPT8
  • From: "iqbal shareef" <iqbalshareef.list@xxxxxxxxx>
• Re: ALSA sound on beagleboard
  • From: David Brownell <david-b@xxxxxxxxxxx>
• ALSA sound on beagleboard
  • From: Rick Bronson <rick@xxxxxxx>
• Re: ARM: OMAP3: Fix get_irqnr_and_base to clear spurious interrupt bits
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap: Add basic support for Pandora handheld console
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: ARM: OMAP3: Fix get_irqnr_and_base to clear spurious interrupt bits
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: ARM: OMAP3: Fix get_irqnr_and_base to clear spurious interrupt bits
  • From: "Felipe Contreras" <felipe.contreras@xxxxxxxxx>
• RE: Problems compiling kernel
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: ARM: OMAP3: Fix get_irqnr_and_base to clear spurious interrupt bits
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: ARM: OMAP3: Fix get_irqnr_and_base to clear spurious interrupt bits
  • From: "Felipe Contreras" <felipe.contreras@xxxxxxxxx>
• Re: PATCH 2/2 OMAP: HSMMC: Disable the mmc clocks when not needed
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [RFC] i2c-omap: Don't wait needlessly
  • From: Sakari Ailus <sakari.ailus@xxxxxxxxx>
• [PATCH] watchdog: fix watchdog probe
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: PATCH 2/2 OMAP: HSMMC: Disable the mmc clocks when not needed
  • From: Jarkko Lavinen <jarkko.lavinen@xxxxxxxxx>
• Problems compiling kernel
  • From: Ramón Finger Lilienthal <ramon@xxxxxxxxxxxxxxxx>
• PATCH 2/2 OMAP: HSMMC: Disable the mmc clocks when not needed
  • From: Jarkko Lavinen <jarkko.lavinen@xxxxxxxxx>
• PATCH 1/2 OMAP: HSMMC: Fix HSMMC2 getting stuck with suspend/resume
  • From: Jarkko Lavinen <jarkko.lavinen@xxxxxxxxx>
• [FYI] TI dspbridge rebase against latest l-o
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• ARM: OMAP3: Fix get_irqnr_and_base to clear spurious interrupt bits
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Fwd: Re: [rtc-linux] [patch 2/3] rtc-twl4030 driver
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH 2/2] OMAP: Add clk_get_parent() for OMAP2/3
  • From: Mans Rullgard <mans@xxxxxxxxx>
• [PATCH 1/2] OMAP: Make dpll4_m4_ck programmable with clk_set_rate()
  • From: Mans Rullgard <mans@xxxxxxxxx>
• Re: Setting dss1_alwon_fck
  • From: Måns Rullgård <mans@xxxxxxxxx>
• Re: Fwd: Re: [rtc-linux] [patch 2/3] rtc-twl4030 driver
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxx>
• Re: Fwd: Re: [rtc-linux] [patch 2/3] rtc-twl4030 driver
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: Fwd: Re: [rtc-linux] [patch 2/3] rtc-twl4030 driver
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxx>
• Re: [PATCH 4/7] Hook twl4030 power code into twl4030 core.
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxx>
• [PATCH 3/3] [OMAPZOOM] INPUT: Switch LDP to use both TWL4030 and GPIO keypad drivers
  • From: Dominic Curran <dcurran@xxxxxx>
• [PATCH 2/3] [OMAPZOOM] INPUT: Remove LDP gpio key hack from TWL4030 keyboard driver.
  • From: Dominic Curran <dcurran@xxxxxx>
• [PATCH 1/3] [OMAPZOOM] INPUT: Add flag to allow gpio-key input auto repeat.
  • From: Dominic Curran <dcurran@xxxxxx>
• About EHCI
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH] i2c: omap: highspeed only over 1000mhz
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH] i2c: omap: highspeed only over 1000mhz
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAPFB: fix printing of reserved memory
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [Fwd: Re: [PATCH] i2c: omap: highspeed only over 1000mhz]
  • From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
• Re: [PATCH] i2c: omap: highspeed only over 1000mhz
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH] i2c: omap: highspeed only over 1000mhz
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH] i2c: omap: highspeed only over 1000mhz
  • From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
• Setting dss1_alwon_fck
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• [PATCH] i2c: omap: highspeed only over 1000mhz
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 0/6] Integrate the twl4030 power code into new twl4030 mfd
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH 4/6] 3430sdp and ldp use custom twl4030 power scripts.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 2/6] Move existing TWL4030 code to drivers/mfd
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 1/6] Add defines and data types for twl4030.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 6/6] omap3 evm, beagle and overo use the generic twl4030 script
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 0/6] Integrate the twl4030 power code into new twl4030 mfd
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 3/6] Hook twl4030 power code into twl4030 core.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 5/6] Generic twl4030 power script for 3430 based boards.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• AUTO_EXTVOLT on OMAP2430
  • From: Seth Forshee <seth.forshee@xxxxxxxxx>
• RE: [PATCH 2/2] OMAP2/3 I2C: reprogram OCP_SYSCONFIG register after reset
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• RE: [PATCH 0/2] OMAP: I2C: reprogram OCP_SYSCONFIG after device reset
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [PATCH 00/05] OMAP3: CPUidle driver
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] power_supply: bq27x00: separate common code
  • From: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
• Re: [PATCH 0/4] bq27x00 updates
  • From: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
• Re: [PATCH] omap: Add basic support for Pandora handheld console
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] power_supply: bq27200: separate bq27200-specific driver
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] power_supply: bq27x00: separate common code
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] bq27x00 updates
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH 5/5] OMAP2/3 omapdev: add code to walk the omapdev records
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 4/5] OMAP3xxx omapdev: add OMAP3xxx omapdev records
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 3/5] OMAP243x omapdev: add OMAP243x omapdev records
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/5] OMAP242x omapdev: add OMAP242x omapdev records
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/5] OMAP2/3 omapdev: add basic omapdev structure
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/5] PM: add omapdev code
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] omap: Add basic support for Pandora handheld console
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH 2/4] power_supply: bq27200: separate bq27200-specific driver
  • From: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
• Re: [PATCH 1/4] power_supply: bq27x00: separate common code
  • From: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
• Re: [PATCH 0/4] bq27x00 updates
  • From: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
• Re: [PATCH] omap: Add basic support for Pandora handheld console
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] Fix bootup crash for LDP platform
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] omap: Add basic support for Pandora handheld console
  • From: "Grazvydas Ignotas" <notasas@xxxxxxxxx>
• Re: [PATCH] Fix bootup crash for LDP platform
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] omap: Add basic support for Pandora handheld console
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] Fix bootup crash for LDP platform
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] Fix bootup crash for LDP platform
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH] omap: Add basic support for Pandora handheld console
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Fwd: Re: [rtc-linux] [patch 2/3] rtc-twl4030 driver
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] omap: Add basic support for Pandora handheld console
  • From: notaz <notasas@xxxxxxxxx>
• Re: [PATCH] omap: Add basic support for Pandora handheld console
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] omap: Add basic support for Pandora handheld console
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• Re: [PATCH] Fix bootup crash for LDP platform
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Fix bootup crash for LDP platform
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] i2c: omap: highspeed only over 1000mhz
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH] Fix bootup crash for LDP platform
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [PATCH] OMAP3 clock: fix non-CORE DPLL rate assignment bugs
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] n800: usb: fix num_eps and avoid BUG()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Fix whitespaces in smartreflex.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Fix compiler warnings in smartreflex.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: OMAP3 NAND: move NAND_BLOCK_SIZE macro to board-3430sdp-flash.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] OMAP3 clock: fix non-CORE DPLL rate assignment bugs
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Fix for omap3_noncore_dpll_enable() warning
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] lm8323 pwm fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] omap-keypad fixes for OMAP2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omap: get rid of a useless cast
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] i2c: omap: highspeed only over 1000mhz
  • From: Ben Dooks <ben-linux@xxxxxxxxx>
• Re: [PATCH] OMAPFB: fix printing of reserved memory
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/4] bq27x00 updates
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] Adds MCBSP mux settings
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [Resend] [PATCH 0/3] OMAP2EVM : Touchscreen driver support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/4] bq27x00 updates
  • From: Anton Vorontsov <avorontsov@xxxxxxxxxxxxx>
• Re: [PATCH] omapfb: Remove casting and change coding style
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch] ehci-omap: (mostly) cosmetic cleanups
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP3: ack spurious IRQs in get_irqnr_and_base
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP3: ack spurious IRQs in get_irqnr_and_base
  • From: Paul Walmsley <paul@xxxxxxxxxxx>
• Re: beagle won't boot.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] i2c: omap: highspeed only over 1000mhz
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 3/4] power_supply: bq27200: separate bq27000-specific driver
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 4/4] power_supply: bq27x00: get rid of old code
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 2/4] power_supply: bq27200: separate bq27200-specific driver
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 1/4] power_supply: bq27x00: separate common code
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 0/4] bq27x00 updates
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• twl4030 - drivers/regulator framework support?
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: beagle won't boot.
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• beagle won't boot.
  • From: Rick Bronson <rick@xxxxxxx>
• Re: [i2c] [PATCH 6/8] i2c-omap: Mark init-only functions as __init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• git-pull request for i2c-omap changes (Re: [i2c] [PATCH 0/8] Updates for i2c-omap from linux-omap tree for review, v2)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP: Fix for omap3_noncore_dpll_enable() warning
  • From: Rick Bronson <rick@xxxxxxx>
• Re: [i2c] [PATCH 8/8] i2c-omap: Clean-up i2c-omap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [i2c] [PATCH 7/8] i2c-omap: Don't compile in OMAP15xx I2C ISR for non-OMAP15xx builds
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [i2c] [PATCH 6/8] i2c-omap: Mark init-only functions as __init
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [i2c] [PATCH 5/8] i2c-omap: Add support on 34xx
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [i2c] [PATCH 3/8] i2c-omap: Add high-speed support to omap-i2c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [i2c] [PATCH 1/8] i2c-omap: Do not use interruptible wait call in omap_i2c_xfer_msg
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [Resending PATCH 2/4] HDQ driver for OMAP2430/3430
  • From: Madhu Chikkature <madhu.cr@xxxxxx>
• [Resending PATCH 4/4] HDQ: Documentation for OMAP HDQ
  • From: Madhu Chikkature <madhu.cr@xxxxxx>
• [Resending PATCH 3/4] HDQ: BQ27000 HDQ Slave Interface Driver
  • From: Madhu Chikkature <madhu.cr@xxxxxx>
• [Resending PATCH 1/4] W1: export w1_read_8 function
  • From: Madhu Chikkature <madhu.cr@xxxxxx>
• Re: dpll4_ck rate broken
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• RE: [PATCH 03/04] OMAP3 SRF: omap3 srf driver
  • From: "Dasgupta, Romit" <romit@xxxxxx>
• RE: [PATCH 01/04] OMAP3 SRF: Generic shared resource f/w
  • From: "Dasgupta, Romit" <romit@xxxxxx>
• dpll4_ck rate broken
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• RE: [PATCH 03/04] OMAP3 SRF: omap3 srf driver
  • From: "Dasgupta, Romit" <romit@xxxxxx>
• RE: [PATCH 01/04] OMAP3 SRF: Generic shared resource f/w
  • From: "Dasgupta, Romit" <romit@xxxxxx>
• Re: Git tree updated to v2.6.27, some issues remain
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 5/6] Generic twl4030 power script for 3430 based boards.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• RE: [patch FYI] twl4030 dumps revision info
  • From: "Pakaravoor, Jagadeesh" <j-pakaravoor@xxxxxx>
• Re: [PATCH] OMAP3: ack spurious IRQs in get_irqnr_and_base
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH 01/04] OMAP3 SRF: Generic shared resource f/w
  • From: "Rajendra Nayak" <rnayak@xxxxxx>
• RE: [PATCH 01/04] OMAP3 SRF: Generic shared resource f/w
  • From: "Dasgupta, Romit" <romit@xxxxxx>
• [PATCH] OMAP3: Remove CONFIG_OMAP_SYSOFFMODE flag
  • From: Kalle Jokiniemi <ext-kalle.jokiniemi@xxxxxxxxx>
• RE: [PATCH 01/04] OMAP3 SRF: Generic shared resource f/w
  • From: "Rajendra Nayak" <rnayak@xxxxxx>
• RE: [PATCH 01/04] OMAP3 SRF: Generic shared resource f/w
  • From: "Dasgupta, Romit" <romit@xxxxxx>
• RE: [PATCH 01/04] OMAP3 SRF: Generic shared resource f/w
  • From: "Rajendra Nayak" <rnayak@xxxxxx>
• Re: Git tree updated to v2.6.27, some issues remain
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/6] Hook twl4030 power code into twl4030 core.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: omapfb: help from userspace
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch FYI] twl4030 dumps revision info
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: [patch FYI] twl4030 dumps revision info
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: omapfb: help from userspace
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omapfb: help from userspace
  • From: "Nathan Monson" <nmonson@xxxxxxxxx>
• RE: [patch FYI] twl4030 dumps revision info
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [PATCH 5/6] Generic twl4030 power script for 3430 based boards.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: omapfb: help from userspace
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omapfb: help from userspace
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omapfb: help from userspace
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch 2.6.27-omap-git+ 6/5] twl4030 MMC card detction
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: omapfb: help from userspace
  • From: "Nathan Monson" <nmonson@xxxxxxxxx>
• Re: omapfb: help from userspace
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] twl4030-usb: rename twl4030_driver to twl4030_usb_driver.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omapfb: help from userspace
  • From: "Nathan Monson" <nmonson@xxxxxxxxx>
• Re: Git tree updated to v2.6.27, some issues remain
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] twl4030-usb: rename twl4030_driver to twl4030_usb_driver.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: Git tree updated to v2.6.27, some issues remain
  • From: "Nathan Monson" <nmonson@xxxxxxxxx>
• Re: [patch 2.6.27-omap-git+ 0/5] twl4030 GPIO updates
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] twl4030-usb: rename twl4030_driver to twl4030_usb_driver.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] [omap2] Fix compiler warnings in gpmc.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omapfb: help from userspace
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Git tree updated to v2.6.27, some issues remain
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [patch 2.6.27-omap-git+] twl4030-usb updates/fixes
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [patch 2.6.27-omap-git+] twl4030-usb updates/fixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch 2.6.27-omap-git 0/6] the last planned twl4030 core IRQ updates
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Git tree updated to v2.6.27, some issues remain
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• Re: Git tree updated to v2.6.27, some issues remain
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.27-omap-git+] twl4030-usb updates/fixes
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 01/04] OMAP3 SRF: Generic shared resource f/w
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH 04/04] OMAP3 SRF: OMAP PM srf implementation
  • From: "Rajendra Nayak" <rnayak@xxxxxx>
• [PATCH 03/04] OMAP3 SRF: omap3 srf driver
  • From: "Rajendra Nayak" <rnayak@xxxxxx>
• [PATCH 02/04] OMAP3 SRF: MPU/CORE/PD latency modeling
  • From: "Rajendra Nayak" <rnayak@xxxxxx>
• [PATCH 01/04] OMAP3 SRF: Generic shared resource f/w
  • From: "Rajendra Nayak" <rnayak@xxxxxx>
• [PATCH 00/04] OMAP3 SRF: OMAP PM interface implemented using SRF
  • From: "Rajendra Nayak" <rnayak@xxxxxx>
• [PATCH 3/3] ARM: OMAP: add missing parenthesis in hsmmc defines
  • From: Adrian Hunter <ext-adrian.hunter@xxxxxxxxx>
• [PATCH 2/3] ARM: OMAP: calculate hsmmc data timeout accurately
  • From: Adrian Hunter <ext-adrian.hunter@xxxxxxxxx>
• [PATCH 1/3] ARM: OMAP: hsmmc requires data reset after data timeout
  • From: Adrian Hunter <ext-adrian.hunter@xxxxxxxxx>
• Re: [PATCH 1/3] clk: introduce omap_clk_associate
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/7] input: lm8323: get rid of global pdata pointer
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 1/5] HDQ Driver for OMAP2430/3430
  • From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
• RE: [PATCH] OMAP 2/3 V4L2 display driver on video planes
  • From: "Shah, Hardik" <hardik.shah@xxxxxx>
• Re: omapfb: help from userspace
  • From: "Nathan Monson" <nmonson@xxxxxxxxx>
• [patch FYI] twl4030 dumps revision info
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 1/7] input: lm8323: get rid of global pdata pointer
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• [PATCH 28/28] [OMAPZOOM] OMAP3430: Enable Camera on 3430sdp and ldp defconfigs
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 27/28] [OMAPZOOM] OMAP34XX: CAM: Add OV3640 Sensor Support
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 26/28] [OMAPZOOM] OMAP: CAM: Add CSI2 changes to Camera driver
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 25/28] [OMAPZOOM] ARM: OMAP: Add ISP CSI2 API.
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 24/28] [OMAPZOOM] OMAP: CAM: Add CSI2 changes to ISP driver
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 22/28] [OMAPZOOM] ARM: OMAP: Add CSI2 register defines.
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 21/28] [OMAPZOOM] OMAP34XX: CAM: Remove the need for RESUME state
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 20/28] [OMAPZOOM] OMAP: CAM: DW9710: RESUME Removal
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 19/28] [OMAPZOOM] OMAP: CAM: MT9P012: RESUME Removal
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 18/28] [OMAPZOOM] OMAP: CAM: Add MMS Kernel changes
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 17/28] [OMAPZOOM] OMAP: CAM: Add MMS Kernel changes
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 16/28] [OMAPZOOM] OMAP: CAM: Add MMS Kernel changes
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 15/28] [OMAPZOOM] V4L: Add RAW10 Pattern format MMS
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 14/28] [OMAPZOOM] OMAP: CAM: Add LSC workaround to ISP driver
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 13/28] [OMAPZOOM] OMAP: CAM: MT9P012: Misc Fixes
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 12/28] [OMAPZOOM] OMAP3430: SDP: CAM: Fix Capture mem boundary
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 11/28] [OMAPZOOM] OMAP: CAM: ISP: Fix Silicon Revision check
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 10/28] [OMAPZOOM] OMAP: CAM: ISP: Resizer Wrapper Fixes
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 9/28] [OMAPZOOM] OMAP: CAM: ISP: MMU Fixes
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 8/28] [OMAPZOOM] OMAP: CAM: ISP: SCM Fixes
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 7/28] [OMAPZOOM] OMAP: CAM: ISP: Backend Fixes
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 5/28] [OMAPZOOM] OMAP: CAM: ISP: Core Fixes
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 4/28] [OMAPZOOM] OMAP: CAM: ISP: USER: Misc fixes
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 3/28] [OMAPZOOM] OMAP: CAM: Misc Camera driver fixes
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 2/28] [OMAPZOOM] V4L: Remove RESUME powerstate and g_priv_mem ioctl
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [PATCH 1/28] [OMAPZOOM] OMAP3PM: Change CSI2 clock name
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• RE: [PATCH 1/3] clk: introduce omap_clk_associate
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• RE: [PATCH 1/3] [RFC] clk: introduce clk_associate
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: git pull request for minimal omap3 support one more time
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/3] Hook into powerdomain code
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 0/3] debugfs entries for PM counters
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 2/3] Add pm-debug counters
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 1/3] Add closures to clkdm_for_each and pwrdm_for_each.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 2/2] Hook into PM counters
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 0/2] PM counters
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 1/2] PM counter infrastructure.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• Re: [PATCH 3/3] Hook into powerdomain code
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 4/6] 3430sdp and ldp use custom twl4030 power scripts.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 6/6] omap3 evm, beagle and overo use the generic twl4030 script
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 3/6] Hook twl4030 power code into twl4030 core.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 1/6] Add defines and data types for twl4030.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 5/6] Generic twl4030 power script for 3430 based boards.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 2/6] Move existing TWL4030 code to drivers/mfd
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 0/6] Integrate the twl4030 power code into new twl4030 mfd
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• Re: [PATCH 1/3] clk: introduce omap_clk_associate
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/3] clk: introduce omap_clk_associate
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• RE: [PATCH 1/3] clk: introduce omap_clk_associate
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• RE: [PATCH 1/3] clk: introduce omap_clk_associate
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: omapfb: help from userspace
  • From: Lauri Leukkunen <lauri.leukkunen@xxxxxxxxx>
• Re: omapfb: help from userspace
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH] OMAP3: ack spurious IRQs in get_irqnr_and_base
  • From: Lauri Leukkunen <lauri.leukkunen@xxxxxxxxx>
• Re: [PATCH 2/7] input: tsc2005: move to gpiolib
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 1/3] [RFC] clk: introduce clk_associate
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• RE: [PATCH 2/3] Add pm-debug counters
  • From: <Tero.Kristo@xxxxxxxxx>
• Re: [PATCH 1/3] [RFC] clk: introduce clk_associate
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 6/8] tsl2563: move tsl2563 to drivers/hwmon
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 1/3] clk: introduce omap_clk_associate
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 2/7] input: tsc2005: move to gpiolib
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] clk: introduce omap_clk_associate
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• Re: [PATCH 2/3] Add pm-debug counters
  • From: jouni.hogander@xxxxxxxxx (Högander Jouni)
• Re: git pull request for minimal omap3 support one more time
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• Re: [PATCH 2/7] input: tsc2005: move to gpiolib
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 6/8] tsl2563: move tsl2563 to drivers/hwmon
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 6/8] tsl2563: move tsl2563 to drivers/hwmon
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [PATCH 7/7] leds: lp5521: move to drivers/leds
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH 6/7] i2c: lp5521: move to LED framework
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH 5/7] i2c: lp5521: simplify mode setting
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH 4/7] i2c: lp5521: cosmetic fixes
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH 3/7] i2c: lp5521: remove dead code
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH 2/7] input: tsc2005: move to gpiolib
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH 1/7] input: lm8323: get rid of global pdata pointer
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH 0/7] updates to few nokia drivers
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] clk: introduce omap_clk_associate
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] clk: introduce omap_clk_associate
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 6/8] tsl2563: move tsl2563 to drivers/hwmon
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] clk: introduce omap_clk_associate
  • From: Igor Stoppa <igor.stoppa@xxxxxxxxx>
• Re: [PATCH 1/3] clk: introduce omap_clk_associate
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: git pull request for minimal omap3 support one more time
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: Revert omap3 WDT changes to avoid merge conflict (Re: linux-next: manual merge of the arm tree)
  • From: Russell King <rmk@xxxxxxxxxxxxxxxx>
• Re: git pull request for minimal omap3 support one more time
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP: Revert omap3 WDT changes to avoid merge conflict (Re: linux-next: manual merge of the arm tree)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/3] [RFC] clk: introduce clk_associate
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: linux-next: manual merge of the arm tree
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/3] Hook into powerdomain code
  • From: Paul Walmsley <paul@xxxxxxxxxxx>
• Re: [PATCH 1/3] Add closures to clkdm_for_each and pwrdm_for_each.
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 2/3] Add pm-debug counters
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH 2/2] OMAP2/3 GPTIMER: skip unnecessary TLDR write during non-autoreload
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• [patch 2.6.27-omap-git+ 6/5] twl4030 MMC card detction
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: git pull request for minimal omap3 support one more time
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] clk: introduce omap_clk_associate
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] clk: introduce omap_clk_associate
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 4/7] Hook twl4030 power code into twl4030 core.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 0/7] Integrate the twl4030 power code into new twl4030 mfd
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 3/7] Twl4030 power code updated for new twl4030 core
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 3/8] lp5521: move to drivers/leds
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH 1/2] OMAP2/3 GPTIMER: drop redundant pending write check
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 2/2] OMAP2/3 GPTIMER: skip unnecessary TLDR write during non-autoreload
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/2] OMAP2/3 GPTIMER: minor optimizations
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/3] clk: introduce omap_clk_associate
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/8] lp5521: move to drivers/leds
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: git pull request for minimal omap3 support one more time
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 3/8] lp5521: move to drivers/leds
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/8] leds: lp5521: register separate leds
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] clk: introduce omap_clk_associate
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 1/3] [RFC] clk: introduce clk_associate
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 5/7] 3430sdp and ldp use custom twl4030 power scripts.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 7/7] omap3 evm, beagle and overo use the generic twl4030 script
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 6/8] tsl2563: move tsl2563 to drivers/hwmon
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 5/8] leds: lp5521: register separate leds
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 3/8] lp5521: move to drivers/leds
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 1/5] HDQ Driver for OMAP2430/3430
  • From: Evgeniy Polyakov <johnpol@xxxxxxxxxxx>
• [PATCH 0/3] debugfs entries for PM counters
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 2/3] Add pm-debug counters
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 1/3] Add closures to clkdm_for_each and pwrdm_for_each.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 3/3] Hook into powerdomain code
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• Re: [PATCH 6/8] tsl2563: move tsl2563 to drivers/hwmon
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 1/5] HDQ Driver for OMAP2430/3430
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/8] tsl2563: move tsl2563 to drivers/hwmon
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 6/8] tsl2563: move tsl2563 to drivers/hwmon
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 1/5] HDQ Driver for OMAP2430/3430
  • From: Evgeniy Polyakov <johnpol@xxxxxxxxxxx>
• Re: [PATCH 6/8] tsl2563: move tsl2563 to drivers/hwmon
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 2/6] HS/EMU OMAP3 SRAM size fix
  • From: "Felipe Contreras" <felipe.contreras@xxxxxxxxx>
• [PATCH 7/8] input: lm8323: get rid of global pdata pointer
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 6/8] tsl2563: move tsl2563 to drivers/hwmon
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 3/8] lp5521: move to drivers/leds
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 2/8] i2c: lp5521: cosmetic fixes
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 1/8] i2c: lp5521: remove dead code
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 4/8] leds: lp5521: simplify mode setting
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 5/8] leds: lp5521: register separate leds
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 8/8] input: tsc2005: move to gpiolib
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH 0/8] updtes to few nokia drivers
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH 1/5] HDQ Driver for OMAP2430/3430
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] OMAP2/3 I2C: reprogram OCP_SYSCONFIG register after reset
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/2] OMAP: I2C: convert 'rev1' flag to generic 'rev' u8
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/2] OMAP: I2C: reprogram OCP_SYSCONFIG after device reset
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: [PATCH 00/05] OMAP3: CPUidle driver
  • From: "Rajendra Nayak" <rnayak@xxxxxx>
• [PATCH 6/6] Errata: ES3.0 SDRC not sending auto-refresh when OMAP wakes-up from OFF mode
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 1/6] Support for EMU/HS off-mode for DMA
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 5/6] Add new register definitions for SDRAM controller
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• PM: OMAP3 HS/EMU off-mode support
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 2/6] HS/EMU OMAP3 SRAM size fix
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 4/6] Enable SDRAM auto-refresh during sleep
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 3/6] PM: OMAP3 HS/EMU off-mode support
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• Re: [PATCH 1/5] HDQ Driver for OMAP2430/3430
  • From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
• Re: linux-next: manual merge of the arm tree
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: linux-next: manual merge of the arm tree
  • From: Russell King <rmk@xxxxxxxxxxxxxxxx>
• [PATCH] twl4030-usb: rename twl4030_driver to twl4030_usb_driver.
  • From: Jagadeesh Bhaskar Pakaravoor <j-pakaravoor@xxxxxx>
• [patch 2.6.27-omap-git+ 5/5] support LED signals on Beagle
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.27-omap-git+ 4/5] twl4030-gpio supports LED signals
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.27-omap-git+ 3/5] hsmmc.c glue uses standard GPIO calls
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.27-omap-git+ 2/5] twl4030-gpio use new gpiolib hooks
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.27-omap-git+ 1/5] gpiolib request/free hooks
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.27-omap-git+ 0/5] twl4030 GPIO updates
  • From: David Brownell <david-b@xxxxxxxxxxx>
• android on omap, yaffs2 or init problem
  • From: twebb <taliaferro62@xxxxxxxxx>
• RE: disable_irq is broken in linux-omap-git
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• RE: disable_irq is broken in linux-omap-git
  • From: "TK, Pratheesh Gangadhar" <pratheesh@xxxxxx>
• Re: [PATCH 1/5] HDQ Driver for OMAP2430/3430
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: disable_irq is broken in linux-omap-git
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• [PATCH 6/7] Generic twl4030 power script for 3430 based boards.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 4/7] Hook twl4030 power code into twl4030 core.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 1/7] Remove existing twl4030 power script code.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 7/7] omap3 evm, beagle and overo use the generic twl4030 script
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 5/7] 3430sdp and ldp use custom twl4030 power scripts.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 3/7] Twl4030 power code updated for new twl4030 core
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 2/7] Add defines and data types for twl4030.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 0/7] Integrate the twl4030 power code into new twl4030 mfd
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• Re: [PATCH 1/5] HDQ Driver for OMAP2430/3430
  • From: Evgeniy Polyakov <johnpol@xxxxxxxxxxx>
• Re: git pull request for minimal omap3 support one more time
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] HDQ Driver for OMAP2430/3430
  • From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
• [PATCH] n800: usb: fix num_eps and avoid BUG()
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• disable_irq is broken in linux-omap-git
  • From: "TK, Pratheesh Gangadhar" <pratheesh@xxxxxx>
• Re: [PATCH 5/7] 3430sdp and ldp use custom twl4030 power scripts.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• Re: [PATCH 7/7] omap3 evm, beagle and overo use the generic twl4030 script
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• Re: [patch 2.6.27-rc8-omap 0/7] resend of pending TWL patches
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: [patch 2.6.27-rc8-omap 0/7] resend of pending TWL patches
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: [patch 2.6.27-rc8-omap 0/7] resend of pending TWL patches
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: [patch 2.6.27-rc8-omap 0/7] resend of pending TWL patches
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [patch 2.6.27-rc8-omap 0/7] resend of pending TWL patches
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: [PATCH 4/7] Hook twl4030 power code into twl4030 core.
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/7] Twl4030 power code updated for new twl4030 core
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/7] Add defines and data types for twl4030.
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/7] Remove existing twl4030 power script code.
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [patch 2.6.27-omap-git 6/6] remove some gllobal twl4030 IRQ defines
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] [omap2] Fix compiler warnings in gpmc.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] i2c-omap: fix I2C timeouts due to recursive omap_i2c_{un,}idle()
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch 2.6.27-omap-git 6/6] remove some gllobal twl4030 IRQ defines
  • From: "Felipe Contreras" <felipe.contreras@xxxxxxxxx>
• Re: Git tree updated to v2.6.27, some issues remain
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: Git tree updated to v2.6.27, some issues remain
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: Git tree updated to v2.6.27, some issues remain
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: [PATCH][omapzoom] BRIDGE Add preemption support to unprotected functions
  • From: "Kanigeri, Hari" <h-kanigeri2@xxxxxx>
• RE: Git tree updated to v2.6.27, some issues remain
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: Git tree updated to v2.6.27, some issues remain
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: Git tree updated to v2.6.27, some issues remain
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: Git tree updated to v2.6.27, some issues remain
  • From: "Nathan Monson" <nmonson@xxxxxxxxx>
• RE: Git tree updated to v2.6.27, some issues remain
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: Git tree updated to v2.6.27, some issues remain
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [PATCH] i2c-omap: fix I2C timeouts due to recursive omap_i2c_{un,}idle()
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.27-omap-git 6/6] remove some gllobal twl4030 IRQ defines
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.27-omap-git 5/6] replace twl4030-gpio irq_chip
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.27-omap-git 4/6] remove twl4030-pwrirq.c
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.27-omap-git 3/6] new sharable twl4030 SIH irq_chip
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.27-omap-git 2/6] new twl4030 SIH irq init
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.27-omap-git 1/6] create twl4030-irq.c
  • From: David Brownell <david-b@xxxxxxxxxxx>
• [patch 2.6.27-omap-git 0/6] the last planned twl4030 core IRQ updates
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 1/5] HDQ Driver for OMAP2430/3430
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] HDQ: OMAP: Add HDQ Device
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• RE: Git tree updated to v2.6.27, some issues remain
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: [PATCH 2/5] HDQ: BQ27000 HDQ Slave Interface Driver
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/7] Hook twl4030 power code into twl4030 core.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 5/7] 3430sdp and ldp use custom twl4030 power scripts.
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH 7/7] omap3 evm, beagle and overo use the generic twl4030 script
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] i2c-omap: fix I2C timeouts due to recursive omap_i2c_{un,}idle()
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• [PATCH] i2c-omap: fix I2C timeouts due to recursive omap_i2c_{un,}idle()
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 5/7] 3430sdp and ldp use custom twl4030 power scripts.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 0/7] Integrate the twl4030 power code into new twl4030 mfd
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 4/7] Hook twl4030 power code into twl4030 core.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 2/7] Add defines and data types for twl4030.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 1/7] Remove existing twl4030 power script code.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 6/7] Generic twl4030 power script for 3430 based boards.
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 7/7] omap3 evm, beagle and overo use the generic twl4030 script
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• [PATCH 3/7] Twl4030 power code updated for new twl4030 core
  • From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
• Re: Git tree updated to v2.6.27, some issues remain
  • From: "Steve Sakoman" <sakoman@xxxxxxxxx>
• Re: Git tree updated to v2.6.27, some issues remain
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: [PATCH] [omap2] Fix compiler warnings in gpmc.c
  • From: "Pakaravoor, Jagadeesh" <j-pakaravoor@xxxxxx>
• [PATCH] Fix whitespaces in smartreflex.c
  • From: Sanjeev Premi <premi@xxxxxx>
• [PATCH] Fix compiler warnings in smartreflex.c
  • From: Sanjeev Premi <premi@xxxxxx>
• Re: [PATCH] Fix compiler warnings in smartreflex.c
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [PATCH] Fix compiler warnings in smartreflex.c
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• Re: [PATCH] Fix compiler warnings in smartreflex.c
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH] Fix compiler warnings in smartreflex.c
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [no subject]
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH] omap: get rid of OMAP_TAG_USB
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH] Fix compiler warnings in smartreflex.c
  • From: Sanjeev Premi <premi@xxxxxx>
• Re: [PATCH 1/1] Enable CONFIG_GPIO_TWL4030=y
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/1] Enable CONFIG_GPIO_TWL4030=y
  • From: Sanjeev Premi <premi@xxxxxx>
• [PATCH 0/1] Enable CONFIG_GPIO_TWL4030=y
  • From: Sanjeev Premi <premi@xxxxxx>
• Git tree updated to v2.6.27, some issues remain
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [patch/rfc/rft 2.6.27-rc8-omap-git] twl4030-pwrirq simplification, cleanup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] omapfb bugfixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/1] ARM: OMAP: fix uninitialized warning
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Fix IO address issue.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH 2.6.27-rc9-omap] i2c-omap: timeouts begone
  • From: Paul Walmsley <paul@xxxxxxxxx>
• git pull request for minimal omap3 support one more time
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] twl4030-core: fix a typo
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] [omap2] Fix compiler warnings in gpmc.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP2xxx: move SRAM to fix boot hang
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Enable CONFIG_GPIO_TWL4030=y
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH] Enable CONFIG_GPIO_TWL4030=y
  • From: Sanjeev Premi <premi@xxxxxx>
• Re: [PATCH 0/3] Add PM debug counters on top of PM counters
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH] [omap2] Fix compiler warnings in gpmc.c
  • From: Sanjeev Premi <premi@xxxxxx>
• Re: Failures with rc9
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Failures with rc9
  • From: "Premi, Sanjeev" <premi@xxxxxx>
• [PATCH] ARM: OMAP3: Add default kernel config for OMAP LDP (Re: [PATCH 0/0] Add minimal omap34xx support)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] ARM: OMAP3: Add basic board support for OMAP LDP (Re: [PATCH 0/0] Add minimal omap34xx support)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Fix IO address issue.
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH] Fix IO address issue.
  • From: Roman Tereshonkov <roman.tereshonkov@xxxxxxxxx>
• Re: [PATCH 02/05] ARM: OMAP3: Add minimal Beagle board support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/0] Add minimal omap34xx support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• RE: [PATCH 00/05] OMAP3: CPUidle driver
  • From: "Rajendra Nayak" <rnayak@xxxxxx>
• RE: [PATCH 00/05] OMAP3: CPUidle driver
  • From: "Rajendra Nayak" <rnayak@xxxxxx>
• Re: HEAD unbootable on 2430SDP
  • From: "Juha Kuikka" <juha.kuikka@xxxxxxxxx>
• [PATCH] OMAP2xxx: move SRAM to fix boot hang
  • From: Paul Walmsley <paul@xxxxxxxxx>
• RE: android on omap
  • From: "Deacon, Keith" <kdeacon@xxxxxx>
• Re: android on omap
  • From: twebb <taliaferro62@xxxxxxxxx>
• RE: android on omap
  • From: "Deacon, Keith" <kdeacon@xxxxxx>
• Re: [PATCH] twl4030-core: fix a typo
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] twl4030-core: fix a typo
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: [PATCH] twl4030-core: fix a typo
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: omapfb: help from userspace
  • From: "Nathan Monson" <nmonson@xxxxxxxxx>
• Re: [RFC][PATCH 5/5] OMAP SSI API documentation
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH 02/02] [omapzoom]ARM-OMAP3-Automatic_TV_detection
  • From: "Castaneda Gonzalez, Axel" <x0055901@xxxxxx>
• [PATCH 01/02] [omapzoom]ARM-OMAP3-TV_detection_support
  • From: "Castaneda Gonzalez, Axel" <x0055901@xxxxxx>
• Re: [PATCH] twl4030-core: fix a typo
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH 0/0] Add minimal omap34xx support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] twl4030-core: fix a typo
  • From: "Pakaravoor, Jagadeesh" <j-pakaravoor@xxxxxx>
• Re: [PATCH 01/05] ARM: OMAP2: Add minimal omap3430 support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: android on omap
  • From: twebb <taliaferro62@xxxxxxxxx>
• Re: [PATCH 07/07] ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 06/07] ARM: OMAP2: Misc updates from linux-omap tree, v4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/0] Add minimal omap34xx support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 02/05] ARM: OMAP3: Add minimal Beagle board support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 01/05] ARM: OMAP2: Add minimal omap3430 support
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 00/05] OMAP3: CPUidle driver
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 07/07] ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: git-pull request for omap mcbsp changes (Re: [PATCH 5/5] ARM: OMAP: Fixes to omap_mcbsp_request function)
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v2] MUSB: BULK request on different available endpoints
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• Re: [PATCH] MUSB: Fixes endpoint allocation logic
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• RE: [Patch] OMAP: ARM: Fix Comp for LDP on DeviceType
  • From: "Zavala Trujillo, Diego" <diegozt@xxxxxx>
• Re: OMAP2 not booting in 2.6.27-rc9?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 00/05] OMAP3: CPUidle driver
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: omapfb: help from userspace
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Fix IO address issue.
  • From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
• [PATCH] Fix IO address issue.
  • From: Roman Tereshonkov <roman.tereshonkov@xxxxxxxxx>
• Re: OMAP2 not booting in 2.6.27-rc9?
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/1] ARM: OMAP: fix uninitialized warning
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• [PATCH 1/1] ARM: OMAP: fix uninitialized warning
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH 0/2] omapfb bugfixes
  • From: Daniel Stone <daniel.stone@xxxxxxxxx>
• [PATCH] FB: OMAP: DISPC: Allow multiple external IRQ handlers
  • From: Daniel Stone <daniel.stone@xxxxxxxxx>
• Re: [PATCH 0/2] omapfb bugfixes
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/2] Input: Touchscreen: Make TSC2005 depend on SPI
  • From: Daniel Stone <daniel.stone@xxxxxxxxx>
• [PATCH 2/2] FB: OMAP: Blizzard: Properly disable zoom when necessary
  • From: Daniel Stone <daniel.stone@xxxxxxxxx>
• [PATCH 0/2] omapfb bugfixes
  • From: Daniel Stone <daniel.stone@xxxxxxxxx>
• OMAP2 not booting in 2.6.27-rc9?
  • From: Jarkko Nikula <jarkko.nikula@xxxxxxxxx>
• RE: omapfb: help from userspace
  • From: "TK, Pratheesh Gangadhar" <pratheesh@xxxxxx>
• Re: [PATCH][omapzoom] BRIDGE Add preemption support to unprotected functions
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH][omapzoom] BRIDGE Add preemption support to unprotected functions
  • From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
• Re: [PATCH 2.6.27-rc9-omap] i2c-omap: timeouts begone
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: [PATCH 2.6.27-rc9-omap] i2c-omap: timeouts begone
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• RE: [PATCH 2.6.27-rc9-omap] i2c-omap: timeouts begone
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• [PATCH][omapzoom] BRIDGE Add preemption support to unprotected functions
  • From: "Ramirez Luna, Omar" <x00omar@xxxxxx>
• Re: [PATCH 2.6.27-rc9-omap] i2c-omap: timeouts begone
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• [PATCH 2.6.27-rc9-omap] i2c-omap: timeouts begone
  • From: David Brownell <david-b@xxxxxxxxxxx>
• RE: omapfb: help from userspace
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: omapfb: help from userspace
  • From: "Nathan Monson" <nmonson@xxxxxxxxx>
• Re: [PATCH 1/5] HDQ Driver for OMAP2430/3430
  • From: Evgeniy Polyakov <johnpol@xxxxxxxxxxx>
• Re: [PATCH] twl4030: Fix pwrirq by making sure the module is responding (Re: kernel oops for 3430sdp)
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] twl4030: Fix pwrirq by making sure the module is responding (Re: kernel oops for 3430sdp)
  • From: David Brownell <david-b@xxxxxxxxxxx>
• Re: [PATCH] twl4030: Fix pwrirq by making sure the module is responding (Re: kernel oops for 3430sdp)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: omapfb: help from userspace
  • From: "Nathan Monson" <nmonson@xxxxxxxxx>
• Re: OMAP3 interrupt maintainer
  • From: Felipe Balbi <me@xxxxxxxxxxxxxxx>
• Re: [PATCH] twl4030: Fix pwrirq by making sure the module is responding (Re: kernel oops for 3430sdp)
  • From: David Brownell <david-b@xxxxxxxxxxx>
• OMAP3 interrupt maintainer
  • From: Rick Bronson <rick@xxxxxxx>