The old driver was an ifdef mess. Writing separate drivers
using common 'library-like' code seemed to be a better choice.
The old driver is then deleted and Makefile/Kconfig are changed
to make place for new bq27200 and bq27000 drivers.
Signed-off-by: Felipe Balbi <felipe.balbi@xxxxxxxxx>
---
drivers/power/Kconfig | 25 +--
drivers/power/Makefile | 3 +-
drivers/power/bq27x00_battery.c | 564 ---------------------------------------
3 files changed, 11 insertions(+), 581 deletions(-)
delete mode 100644 drivers/power/bq27x00_battery.c
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index c0a3036..0ca1aee 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -49,26 +49,19 @@ config BATTERY_OLPC
help
Say Y to enable support for the battery on the OLPC laptop.
-config BATTERY_BQ27x00
- tristate "BQ27x00 battery driver"
+config BATTERY_BQ27200
+ tristate "BQ27200 battery driver"
+ depends on I2C
+ select I2C_OMAP
help
- Say Y here to enable support for batteries with BQ27000 or BQ27200 chip.
+ Say Y here to enable support for batteries with BQ27200 chip.
-config BATTERY_BQ27000
- bool "BQ27000 battery driver"
- depends on BATTERY_BQ27x00
- select W1
+config BATTERY BQ27000
+ tristate "BQ27000 battery driver"
+ depends on W1
select W1_SLAVE_BQ27000
help
- Say Y here to enable support for batteries with BQ27000(HDQ) chip.
-
-config BATTERY_BQ27200
- bool "BQ27200 battery driver"
- depends on BATTERY_BQ27x00
- select I2C
- select I2C_OMAP
- help
- Say Y here to enable support for batteries with BQ27200(I2C) chip.
+ Say Y here to enable support for batteries with BQ27000 chip.
config TWL4030_BCI_BATTERY
tristate "OMAP TWL4030 BCI Battery driver"
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index 8da941a..0268c22 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -20,7 +20,8 @@ obj-$(CONFIG_APM_POWER) += apm_power.o
obj-$(CONFIG_BATTERY_DS2760) += ds2760_battery.o
obj-$(CONFIG_BATTERY_PMU) += pmu_battery.o
obj-$(CONFIG_BATTERY_OLPC) += olpc_battery.o
-obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o
+obj-$(CONFIG_BATTERY_BQ27200) += bq27200.o bq27x00.o
+obj-$(CONFIG_BATTERY_BQ27000) += bq27000.o bq27x00.o
obj-$(CONFIG_TWL4030_BCI_BATTERY) += twl4030_bci_battery.o
obj-$(CONFIG_BATTERY_TOSA) += tosa_battery.o
obj-$(CONFIG_BATTERY_PALMTX) += palmtx_battery.o
diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
deleted file mode 100644
index 8b439e8..0000000
--- a/drivers/power/bq27x00_battery.c
+++ /dev/null
@@ -1,564 +0,0 @@
-/*
- * linux/drivers/power/bq27x00_battery.c
- *
- * BQ27000/BQ27200 battery driver
- *
- * Copyright (C) 2008 Texas Instruments, Inc.
- *
- * Author: Texas Instruments
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- *
- */
-#include <linux/module.h>
-#include <linux/param.h>
-#include <linux/jiffies.h>
-#include <linux/workqueue.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/power_supply.h>
-
-#ifdef CONFIG_BATTERY_BQ27000
-#include "../w1/w1.h"
-#endif
-#ifdef CONFIG_BATTERY_BQ27200
-#include <linux/i2c.h>
-#endif
-
-#define BQ27x00_REG_TEMP 0x06
-#define BQ27x00_REG_VOLT 0x08
-#define BQ27x00_REG_RSOC 0x0B /* Relative State-of-Charge */
-#define BQ27x00_REG_AI 0x14
-#define BQ27x00_REG_FLAGS 0x0A
-#define HIGH_BYTE(A) ((A) << 8)
-
-#ifdef CONFIG_BATTERY_BQ27000
-extern int w1_bq27000_read(struct device *dev, u8 reg);
-#endif
-
-struct bq27x00_device_info;
-struct bq27x00_access_methods {
- int (*read)(u8 reg, int *rt_value, int b_single,
- struct bq27x00_device_info *di);
-};
-
-struct bq27x00_device_info {
- struct device *dev;
-#ifdef CONFIG_BATTERY_BQ27000
- struct device *w1_dev;
-#endif
-#ifdef CONFIG_BATTERY_BQ27200
- struct i2c_client *client;
-#endif
- unsigned long update_time;
- int voltage_uV;
- int current_uA;
- int temp_C;
- int charge_rsoc;
- struct bq27x00_access_methods *bus;
- struct power_supply bat;
- struct delayed_work monitor_work;
-};
-
-static unsigned int cache_time = 60000;
-module_param(cache_time, uint, 0644);
-MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
-
-static enum power_supply_property bq27x00_battery_props[] = {
- POWER_SUPPLY_PROP_PRESENT,
- POWER_SUPPLY_PROP_VOLTAGE_NOW,
- POWER_SUPPLY_PROP_CURRENT_NOW,
- POWER_SUPPLY_PROP_CHARGE_NOW,
- POWER_SUPPLY_PROP_CAPACITY,
- POWER_SUPPLY_PROP_TEMP,
-};
-
-static int bq27x00_read(u8 reg, int *rt_value, int b_single,
- struct bq27x00_device_info *di);
-
-#ifdef CONFIG_BATTERY_BQ27000
-static int bq27000_battery_probe(struct platform_device *dev);
-static int bq27000_battery_remove(struct platform_device *dev);
-#ifdef CONFIG_PM
-static int bq27000_battery_suspend(struct platform_device *dev,
- pm_message_t state);
-static int bq27000_battery_resume(struct platform_device *dev);
-#endif /* CONFIG_PM */
-
-static struct platform_driver bq27000_battery_driver = {
- .probe = bq27000_battery_probe,
- .remove = bq27000_battery_remove,
-#ifdef CONFIG_PM
- .suspend = bq27000_battery_suspend,
- .resume = bq27000_battery_resume,
-#endif /* CONFIG_PM */
- .driver = {
- .name = "bq27000-battery",
- },
-};
-#endif /* CONFIG_BATTERY_BQ27000 */
-
-#ifdef CONFIG_BATTERY_BQ27200
-static int bq27200_battery_probe(struct i2c_client *client);
-static int bq27200_battery_remove(struct i2c_client *client);
-#ifdef CONFIG_PM
-static int bq27200_battery_suspend(struct i2c_client *client,
- pm_message_t mesg);
-static int bq27200_battery_resume(struct i2c_client *client);
-#endif /* CONFIG_PM */
-static struct i2c_driver bq27200_battery_driver = {
- .driver = {
- .name = "bq27200-bat",
- },
- .probe = bq27200_battery_probe,
- .remove = bq27200_battery_remove,
-#ifdef CONFIG_PM
- .suspend = bq27200_battery_suspend,
- .resume = bq27200_battery_resume,
-#endif /* CONFIG_PM */
-};
-#endif /* CONFIG_BATTERY_BQ27200 */
-
-/*
- * Return the battery temperature in Celcius degrees
- * Or < 0 if something fails.
- */
-static int bq27x00_battery_temperature(struct bq27x00_device_info *di)
-{
- int ret, temp = 0;
-
- ret = bq27x00_read(BQ27x00_REG_TEMP, &temp, 0, di);
- if (ret) {
- pr_err("BQ27x00 battery driver:"
- "Error reading temperature from the battery\n");
- return ret;
- }
-
- return (temp >> 2) - 273;
-}
-
-/*
- * Return the battery Voltage in milivolts
- * Or < 0 if something fails.
- */
-static int bq27x00_battery_voltage(struct bq27x00_device_info *di)
-{
- int ret, volt = 0;
-
- ret = bq27x00_read(BQ27x00_REG_VOLT, &volt, 0, di);
- if (ret) {
- pr_err("BQ27x00 battery driver:"
- "Error reading battery voltage from the battery\n");
- return ret;
- }
-
- return volt;
-}
-
-/*
- * Return the battery average current
- * Note that current can be negative signed as well
- * Or 0 if something fails.
- */
-static int bq27x00_battery_current(struct bq27x00_device_info *di)
-{
- int ret, curr = 0, flags = 0;
-
- ret = bq27x00_read(BQ27x00_REG_AI, &curr, 0, di);
- if (ret) {
- pr_err("BQ27x00 battery driver:"
- "Error reading current from the battery\n");
- return 0;
- }
- ret = bq27x00_read(BQ27x00_REG_FLAGS, &flags, 0, di);
- if (ret < 0) {
- pr_err("BQ27x00 battery driver:"
- "Error reading battery flags\n");
- return 0;
- }
- if ((flags & (1 << 7)) != 0) {
- pr_debug("Negative current\n");
- return -curr;
- } else {
- return curr;
- }
-}
-
-/*
- * Return the battery Relative State-of-Charge
- * Or < 0 if something fails.
- */
-static int bq27x00_battery_rsoc(struct bq27x00_device_info *di)
-{
- int ret, rsoc = 0;
-
- ret = bq27x00_read(BQ27x00_REG_RSOC, &rsoc, 1, di);
- if (ret) {
- pr_err("BQ27x00 battery driver:"
- "Error reading battery Relative"
- "State-of-Charge\n");
- return ret;
- }
- return rsoc;
-}
-
-#ifdef CONFIG_BATTERY_BQ27000
-static inline int bq27000_read(u8 reg, int *rt_value, int b_single,
- struct bq27x00_device_info *di)
-{
- u8 val;
-
- val = w1_bq27000_read(di->w1_dev, reg);
- *rt_value = val;
-
- if (!b_single) {
- val = 0;
- val = w1_bq27000_read(di->w1_dev, reg + 1);
- *rt_value += HIGH_BYTE((int) val);
- }
-
- return 0;
-}
-#else
-static inline int bq27000_read(u8 reg, int *rt_value, int b_single,
- struct bq27x00_device_info *di)
-{
- return 0;
-}
-#endif
-
-#ifdef CONFIG_BATTERY_BQ27200
-static inline int bq27200_read(u8 reg, int *rt_value, int b_single,
- struct bq27x00_device_info *di)
-{
- struct i2c_client *client = di->client;
- struct i2c_msg msg[1];
- unsigned char data[2];
- int err;
-
- if (!client->adapter)
- return -ENODEV;
-
- msg->addr = client->addr;
- msg->flags = 0;
- msg->len = 1;
- msg->buf = data;
-
- data[0] = reg;
- err = i2c_transfer(client->adapter, msg, 1);
-
- if (err >= 0) {
- if (!b_single)
- msg->len = 2;
- else
- msg->len = 1;
-
- msg->flags = I2C_M_RD;
- err = i2c_transfer(client->adapter, msg, 1);
- if (err >= 0) {
- if (!b_single)
- *rt_value = data[1] | HIGH_BYTE(data[0]);
- else
- *rt_value = data[0];
-
- return 0;
- } else {
- pr_err("BQ27200 I2C read failed\n");
- return err;
- }
- } else {
- pr_err("BQ27200 I2C write failed\n");
- return err;
- }
-}
-#else
-static inline int bq27200_read(u8 reg, int *rt_value, int b_single,
- struct bq27x00_device_info *di)
-{
- return 0;
-}
-#endif
-
-static int bq27x00_read(u8 reg, int *rt_value, int b_single,
- struct bq27x00_device_info *di)
-{
- int ret;
-
- ret = di->bus->read(reg, rt_value, b_single, di);
- return ret;
-}
-
-/*
- * Read the battery temp, voltage, current and relative state of charge.
- */
-static void bq27x00_battery_read_status(struct bq27x00_device_info *di)
-{
- if (di->update_time && time_before(jiffies, di->update_time +
- msecs_to_jiffies(cache_time)))
- return;
-
- di->temp_C = bq27x00_battery_temperature(di);
- di->voltage_uV = bq27x00_battery_voltage(di);
- di->current_uA = bq27x00_battery_current(di);
- di->charge_rsoc = bq27x00_battery_rsoc(di);
-
- di->update_time = jiffies;
-
- return;
-}
-
-static void bq27x00_battery_work(struct delayed_work *work)
-{
- struct bq27x00_device_info *di = container_of(work,
- struct bq27x00_device_info, monitor_work);
-
- bq27x00_battery_read_status(di);
- schedule_delayed_work(&di->monitor_work, 100);
- return;
-}
-
-#define to_bq27x00_device_info(x) container_of((x), \
- struct bq27x00_device_info, bat);
-
-static int bq27x00_battery_get_property(struct power_supply *psy,
- enum power_supply_property psp,
- union power_supply_propval *val)
-{
- struct bq27x00_device_info *di = to_bq27x00_device_info(psy);
-
- switch (psp) {
- case POWER_SUPPLY_PROP_VOLTAGE_NOW:
- val->intval = di->voltage_uV;
- break;
- case POWER_SUPPLY_PROP_CURRENT_NOW:
- val->intval = di->current_uA;
- break;
- case POWER_SUPPLY_PROP_CHARGE_NOW:
- val->intval = di->charge_rsoc;
- break;
- case POWER_SUPPLY_PROP_TEMP:
- val->intval = di->temp_C;
- break;
- case POWER_SUPPLY_PROP_CAPACITY:
- val->intval = di->charge_rsoc;
- break;
- case POWER_SUPPLY_PROP_PRESENT:
- if (di->voltage_uV == 0)
- val->intval = 0;
- else
- val->intval = 1;
- break;
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static void bq27x00_powersupply_init(struct bq27x00_device_info *di)
-{
- di->bat.type = POWER_SUPPLY_TYPE_BATTERY;
- di->bat.properties = bq27x00_battery_props;
- di->bat.num_properties = ARRAY_SIZE(bq27x00_battery_props);
- di->bat.get_property = bq27x00_battery_get_property;
- di->bat.external_power_changed = NULL;
- return;
-}
-
-#ifdef CONFIG_BATTERY_BQ27200
-static int bq27200_battery_probe(struct i2c_client *client)
-{
- struct bq27x00_device_info *di;
- struct bq27x00_access_methods *bus;
- int retval = 0;
-
- di = kzalloc(sizeof(*di), GFP_KERNEL);
- if (!di) {
- pr_err("BQ27000 battery driver:"
- "Failed to allocate device info structure\n");
- return -ENOMEM;
- }
-
- bus = kzalloc(sizeof(*bus), GFP_KERNEL);
- if (!bus) {
- pr_err("BQ27000 battery driver:"
- "Failed to allocate access method structure\n");
- kfree(di);
- return -ENOMEM;
- }
-
- i2c_set_clientdata(client, di);
- di->dev = &client->dev;
- di->bat.name = "bq27200";
- bus->read = &bq27200_read;
- di->bus = bus;
- di->client = client;
-
- bq27x00_powersupply_init(di);
-
- retval = power_supply_register(&client->dev, &di->bat);
- if (retval) {
- pr_err("BQ27200 battery driver: Failed to register battery\n");
- goto batt_failed;
- }
-
- INIT_DELAYED_WORK(&di->monitor_work, bq27x00_battery_work);
- schedule_delayed_work(&di->monitor_work, 100);
-
- return 0;
-
-batt_failed:
- kfree(bus);
- kfree(di);
- return retval;
-}
-
-static int bq27200_battery_remove(struct i2c_client *client)
-{
- struct bq27x00_device_info *di = i2c_get_clientdata(client);
-
- flush_scheduled_work();
- power_supply_unregister(&di->bat);
- kfree(di);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int bq27200_battery_suspend(struct i2c_client *client, pm_message_t mesg)
-{
- struct bq27x00_device_info *di = i2c_get_clientdata(client);
-
- cancel_delayed_work(&di->monitor_work);
- return 0;
-}
-
-static int bq27200_battery_resume(struct i2c_client *client)
-{
- struct bq27x00_device_info *di = i2c_get_clientdata(client);
-
- schedule_delayed_work(&di->monitor_work, 0);
- return 0;
-}
-#endif /* CONFIG_PM */
-#endif /* CONFIG_BATTERY_BQ27200 */
-
-#ifdef CONFIG_BATTERY_BQ27000
-static int bq27000_battery_probe(struct platform_device *pdev)
-{
- struct bq27x00_device_info *di;
- struct bq27x00_access_methods *bus;
- int retval = 0;
-
- di = kzalloc(sizeof(*di), GFP_KERNEL);
- if (!di) {
- pr_err("BQ27000 battery driver:"
- "Failed to allocate device info structure\n");
- return -ENOMEM;
- }
-
- bus = kzalloc(sizeof(*bus), GFP_KERNEL);
- if (!bus) {
- pr_err("BQ27000 battery driver:"
- "Failed to allocate access method structure\n");
- kfree(di);
- return -ENOMEM;
- }
-
- platform_set_drvdata(pdev, di);
-
- di->dev = &pdev->dev;
- di->w1_dev = pdev->dev.parent;
- di->bat.name = "bq27000";
- bus->read = &bq27000_read;
- di->bus = bus;
-
- bq27x00_powersupply_init(di);
-
- retval = power_supply_register(&pdev->dev, &di->bat);
- if (retval) {
- pr_err("BQ27000 battery driver: Failed to register battery\n");
- goto batt_failed;
- }
-
- INIT_DELAYED_WORK(&di->monitor_work, bq27x00_battery_work);
- schedule_delayed_work(&di->monitor_work, 50);
-
- return 0;
-
-batt_failed:
- kfree(bus);
- kfree(di);
- return retval;
-}
-
-static int bq27000_battery_remove(struct platform_device *pdev)
-{
- struct bq27x00_device_info *di = platform_get_drvdata(pdev);
-
- flush_scheduled_work();
- power_supply_unregister(&di->bat);
- platform_set_drvdata(pdev, NULL);
- kfree(di);
-
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int bq27000_battery_suspend(struct platform_device *pdev,
- pm_message_t state)
-{
- struct bq27x00_device_info *di = platform_get_drvdata(pdev);
-
- cancel_delayed_work(&di->monitor_work);
- return 0;
-}
-
-static int bq27000_battery_resume(struct platform_device *pdev)
-{
- struct bq27x00_device_info *di = platform_get_drvdata(pdev);
-
- schedule_delayed_work(&di->monitor_work, 0);
- return 0;
-}
-#endif /* CONFIG_PM */
-#endif /* CONFIG_BATTERY_BQ27000 */
-
-static int __init bq27x00_battery_init(void)
-{
- int status = 0;
-
-#ifdef CONFIG_BATTERY_BQ27000
- status = platform_driver_register(&bq27000_battery_driver);
- if (status)
- printk(KERN_ERR "Unable to register BQ27000 driver\n");
-#endif
-#ifdef CONFIG_BATTERY_BQ27200
- status = i2c_add_driver(&bq27200_battery_driver);
- printk(KERN_ERR "Unable to register BQ27200 driver\n");
-#endif
- return status;
-}
-
-static void __exit bq27x00_battery_exit(void)
-{
-#ifdef CONFIG_BATTERY_BQ27000
- platform_driver_unregister(&bq27000_battery_driver);
-#endif
-#ifdef CONFIG_BATTERY_BQ27200
- i2c_del_driver(&bq27200_battery_driver);
-#endif
-}
-
-module_init(bq27x00_battery_init);
-module_exit(bq27x00_battery_exit);
-
-MODULE_AUTHOR("Texas Instruments");
-MODULE_DESCRIPTION("BQ27x00 battery moniter driver");
-MODULE_LICENSE("GPL");
--
1.6.0.2.307.gc427
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
