* Gadiyar, Anand <gadiyar@xxxxxx> [081017 12:01]: > > Hi, > > > > I got the lastest code on Oct 16 via: > > > > git clone git://source.mvista.com/git/linux-omap-2.6.git > > cd linux-omap-2.6 > > make omap3_beagle_defconfig > > make uImage CROSS_COMPILE="arm-angstrom-linux-gnueabi-" CC="ccache arm-angstrom-linux-gnueabi-gcc-4.2.1+csl-arm-2007q3-53" LD="arm-angstrom-linux-gnueabi-ld" > > > > and it doesn't seem to want to cooperate with my beagleboard. As > > far as I can tell, it's stuck in > > > > the while loop in omap_start_ehc(). I think because this bit never > > got set: > > > > CM_FCLKEN3_CORE->EN_USBTLL (page 472 of the OMAP3 pdf). > > > > Might have something to do with "usbtll_fck". > > > > Any help greatly appreciated. > > Quick and simple solution, > 1. "make menuconfig" > 2. Go to Device Drivers -> USB Support > 3. Disable EHCI HCD > 4. Rebuild and boot > > EHCI doesn't work anyway on beagle. Why bother having it built in in defconfig? > > - Anand > *Extremely frustrated with EHCI and clock control at the moment* I've disabled EHCI for now in all board configs. Tony > > > > > Thanks, > > > > Rick > > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
