* Tony Lindgren <tony@xxxxxxxxxxx> [081010 12:41]:
> * Tony Lindgren <tony@xxxxxxxxxxx> [081010 12:15]:
> > * Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx> [081010 11:42]:
> > > On Thu, Oct 09, 2008 at 06:17:25PM +0300, Tony Lindgren wrote:
> > > > Sure, I'll post a minimal LDP patch separately tomorrow. I don't have
> > > > an LDP so I can't verify it boots though.
> > >
> > > Unfortunately, Linus has been unpredictable, and released 2.6.27 last
> > > night, rather than the usual one week after -rc9.
> > >
> > > What this means is that the merge window is now open, and I shouldn't
> > > be accepting anything else into my kernel tree.
> > >
> > > However, if you can get LDP in by this evening, I'll pull it into the
> > > tree. That will be the final devel code merged into my tree for 2.6.28.
> >
> > Sure. Here's the minimal board patch for LDP with it's defconfig
> > in the following mail. Also added to the omap3-upstream queue.
>
> Here's the defconfig.
And here's the updated pull request for you with the LDP patches added.
I also changed the title of the Overo patches to say OMAP3 instead of
OMAP2 for consistency.
Note that this will also pull the already posted omap2-upstream as
omap3-upstream is based on that.
Tony
The following changes since commit 56f68556d7bbb51dd158c74deb09c783345bfbbd:
Russell King (1):
Merge unstable branch 'omap-rmk'
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git omap3-upstream
Jouni Hogander (1):
ARM: OMAP2 Provide function to enable/disable uart clocks
Nishant Kamat (2):
ARM: OMAP3: Add basic board support for OMAP LDP
ARM: OMAP3: Add default kernel config for OMAP LDP
Paul Walmsley (2):
ARM: OMAP2: Fix sparse, checkpatch warnings fro GPMC code, use ioremap
ARM: OMAP2: Fix sparse, checkpatch warnings in OMAP2/3 IRQ code
Steve Sakoman (2):
ARM: OMAP3: Add support for the Gumstix Overo board (rev 3)
ARM: OMAP3: Defconfig for the Gumstix Overo board (rev 3)
Syed Mohammed, Khasim (3):
ARM: OMAP3: Add minimal omap3430 support
ARM: OMAP3: Add minimal Beagle board support
ARM: OMAP3: Add Beagle defconfig
Tony Lindgren (3):
ARM: OMAP2: Move sleep.S into sleep24xx.S
ARM: OMAP2: Use omap_globals for CPU detection for multi-omap
ARM: OMAP2: Misc updates from linux-omap tree
Vikram Pandita (1):
ARM: OMAP2: Add pinmux support for omap34xx
arch/arm/Makefile | 1 +
arch/arm/configs/omap3_beagle_defconfig | 1321 ++++++++++++++
arch/arm/configs/omap_ldp_defconfig | 1044 +++++++++++
arch/arm/configs/overo_defconfig | 1885 ++++++++++++++++++++
arch/arm/mach-omap1/devices.c | 2 +-
arch/arm/mach-omap2/Kconfig | 22 +-
arch/arm/mach-omap2/Makefile | 9 +-
arch/arm/mach-omap2/board-ldp.c | 86 +
arch/arm/mach-omap2/board-omap3beagle.c | 244 +++
arch/arm/mach-omap2/board-overo.c | 242 +++
arch/arm/mach-omap2/clock.h | 1 +
arch/arm/mach-omap2/devices.c | 225 ++-
arch/arm/mach-omap2/gpmc.c | 86 +-
arch/arm/mach-omap2/id.c | 39 +-
arch/arm/mach-omap2/io.c | 145 ++-
arch/arm/mach-omap2/irq.c | 79 +-
arch/arm/mach-omap2/memory.c | 14 +
arch/arm/mach-omap2/memory.h | 7 +
arch/arm/mach-omap2/mux.c | 245 +++-
arch/arm/mach-omap2/serial.c | 100 +-
arch/arm/mach-omap2/{sleep.S => sleep24xx.S} | 32 +-
arch/arm/mach-omap2/sram34xx.S | 179 ++
arch/arm/mm/Kconfig | 2 +-
arch/arm/plat-omap/Kconfig | 9 +-
arch/arm/plat-omap/common.c | 4 +
arch/arm/plat-omap/devices.c | 26 +-
arch/arm/plat-omap/include/mach/board-2430sdp.h | 6 +-
arch/arm/plat-omap/include/mach/board-apollon.h | 6 +
arch/arm/plat-omap/include/mach/board-h4.h | 5 +-
arch/arm/plat-omap/include/mach/board-ldp.h | 36 +
.../arm/plat-omap/include/mach/board-omap3beagle.h | 33 +
arch/arm/plat-omap/include/mach/board-overo.h | 26 +
arch/arm/plat-omap/include/mach/board.h | 2 +
arch/arm/plat-omap/include/mach/common.h | 3 +
arch/arm/plat-omap/include/mach/control.h | 17 +-
arch/arm/plat-omap/include/mach/cpu.h | 5 +
arch/arm/plat-omap/include/mach/debug-macro.S | 12 +
arch/arm/plat-omap/include/mach/entry-macro.S | 12 +-
arch/arm/plat-omap/include/mach/gpio.h | 2 +
arch/arm/plat-omap/include/mach/gpmc.h | 12 +
arch/arm/plat-omap/include/mach/hardware.h | 10 +-
arch/arm/plat-omap/include/mach/io.h | 3 -
arch/arm/plat-omap/include/mach/irqs.h | 41 +
arch/arm/plat-omap/include/mach/mcbsp.h | 2 +-
arch/arm/plat-omap/include/mach/memory.h | 2 +-
arch/arm/plat-omap/include/mach/mux.h | 180 ++-
arch/arm/plat-omap/include/mach/omap1510.h | 2 +
arch/arm/plat-omap/include/mach/omap16xx.h | 7 +-
arch/arm/plat-omap/include/mach/omap24xx.h | 2 +-
arch/arm/plat-omap/include/mach/omapfb.h | 3 +
arch/arm/plat-omap/include/mach/pm.h | 3 +-
arch/arm/plat-omap/include/mach/sdrc.h | 2 +
arch/arm/plat-omap/include/mach/serial.h | 6 +
arch/arm/plat-omap/include/mach/sram.h | 10 +
arch/arm/plat-omap/include/mach/system.h | 2 +-
arch/arm/plat-omap/io.c | 32 +-
arch/arm/plat-omap/sram.c | 53 +-
57 files changed, 6261 insertions(+), 325 deletions(-)
create mode 100644 arch/arm/configs/omap3_beagle_defconfig
create mode 100644 arch/arm/configs/omap_ldp_defconfig
create mode 100644 arch/arm/configs/overo_defconfig
create mode 100644 arch/arm/mach-omap2/board-ldp.c
create mode 100644 arch/arm/mach-omap2/board-omap3beagle.c
create mode 100644 arch/arm/mach-omap2/board-overo.c
rename arch/arm/mach-omap2/{sleep.S => sleep24xx.S} (85%)
create mode 100644 arch/arm/mach-omap2/sram34xx.S
create mode 100644 arch/arm/plat-omap/include/mach/board-ldp.h
create mode 100644 arch/arm/plat-omap/include/mach/board-omap3beagle.h
create mode 100644 arch/arm/plat-omap/include/mach/board-overo.h
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
