* Tony Lindgren <tony@xxxxxxxxxxx> [081016 15:59]: > * Tony Lindgren <tony@xxxxxxxxxxx> [081016 15:53]: > > * Nathan Monson <nmonson@xxxxxxxxx> [081016 15:15]: > > > On Thu, Oct 16, 2008 at 3:10 PM, Tony Lindgren <tony@xxxxxxxxxxx> wrote: > > > > No.. And I also got some -33 errors here too :( So back to the drawing > > > > board. > > > > > > > > Could you post step by step instructions on how you can reproduce your > > > > problem? > > > > > > I'm running the DSP Bridge patches in my kernel. I got them set up > > > using this guide: > > > http://elinux.org/BeagleBoard/DSP_Howto > > > > > > That guide also points to some sample binaries, including 'ping.out', > > > which is a simple round-trip test between the DSP and ARM. > > > > > > To reproduce, I do this: > > > 1) Boot kernel with mem=122m > > > 2) modprobe bridgedriver phys_mempool_base=0x87a00000 > > > phys_mempool_size=0x600000 > > > base_img=/home/root/dsp/ddspbase_tiomap3430.dof64P > > > 3) while true; do ./ping.out; done > > > > > > This ALWAYS reproduces within seconds. > > > > > > If the DSP patches are too much work to get set up, I've also heard > > > that people can reproduce this issue by playing movie files with > > > mplayer on Angstrom. > > > > Thanks, I'll set that up when I get a chance. > > > > Meanwhile, here's one more patch for you to test if you have a chance. > > Maybe also do a power off for few seconds before booting with this > > just in case. > > > > If this still does not help, then we'll use the strongly ordered patch > > for now, and tag v2.6.27-omap1 tomorrow. Then we can continue debugging > > the issue until we fully understand it. > > Well with this one I eventually got one -33 error, but not a series of > them. This is with Lauri's patch and this patch applied. > > Tony > > > --- a/arch/arm/mach-omap2/irq.c > > +++ b/arch/arm/mach-omap2/irq.c > > @@ -53,6 +53,7 @@ static struct omap_irq_bank { > > static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg) > > { > > __raw_writel(val, bank->base_reg + reg); > > + __raw_readl(bank->base_reg + reg); > > } > > > > static u32 intc_bank_read_reg(struct omap_irq_bank *bank, u16 reg) > -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
