Linux for Texus Instruments OMAP Processors

• Thread Index

• Re: [PATCH v2 12/32] OMAP: PM: DMA context save/restore for off-mode support
  • From: Grazvydas Ignotas <notasas@xxxxxxxxx>
• RE: [PATCH] ARM: OMAP3: cm-t35: add EHCI support
  • From: "Gadiyar, Anand" <gadiyar@xxxxxx>
• Re: [PATCH 4/4 v2] ASoC: TWL4030: Driver registration via twl4030_codec MFD
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• RE: [PATCH 01/17] PM: fix suspend control for IVA2
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH 2/2 v2] OMAP3:PM:SR: SmartReflex Refactor Rev3.0
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH]Omap3630: Add hsmmc related checks
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• [PATCH] update mach-types
  • From: y@vip-tid.localdomain
• Re: [PATCH 05/10] omap1: Fix DSP public peripherals support for ams-delta
  • From: Jon Hunter <jon-hunter@xxxxxx>
• [PATCH v2 32/32] OMAP3: PM: Program SDRC to send self refresh on timeout of AUTO_CNT
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 31/32] OMAP3: PM: Enable IO-CHAIN wakeup
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 30/32] OMAP3: PM: MPU and CORE should stay awake if there is CAM domain ACTIVE
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 29/32] OMAP3: PM: Prevent PER from going OFF when CORE is going INA
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 28/32] OMAP3: PM: decouple PER and CORE context save and restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 27/32] PM debug: allow configurable wakeup from suspend on OMAP GPtimer
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 26/32] OMAP3: PM debug: allow runtime toggle of PM features
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 25/32] OMAP3: PM: Wait for SDRC ready iso a blind delay
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 24/32] PM: Disable usb host HW save and restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 23/32] OMAP3: PM: Fix INTC context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 22/32] OMAP3: PM: SDRC auto-refresh workaround for off-mode
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 21/32] OMAP: Store reboot mode in scratchpad on OMAP34xx
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 20/32] OMAP: PM: Clear DMA channel state after a wakeup
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 19/32] OMAP3: PM: Fix PLL_MOD CLKEN offset in scratchpad
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 18/32] ARM: OMAP: SMS: save/restore of SMS_SYSCONFIG for off-mode
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 17/32] OMAP3: PM: Fix secure SRAM context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 16/32] OMAP3: PM: Save and restore also CM_CLKSEL1_PLL_IVA2
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 15/32] OMAP3: PM: Enable SDRAM auto-refresh during sleep
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 14/32] OMAP3: PM: save secure RAM only during init
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 13/32] OMAP3 PM: off-mode support for HS/EMU devices
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 12/32] OMAP: PM: DMA context save/restore for off-mode support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 11/32] OMAP3: PM: CORE domain off-mode support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 10/32] OMAP3: PM: MPU off-mode support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 09/32] OMAP3: PM: Restore MMU table entry
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 08/32] OMAP3: PM: handle PER/NEON/CORE in idle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 07/32] OMAP3: PM: restore SRAM functions after off-mode.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 06/32] OMAP3: PM: SCM context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 05/32] OMAP3: PM: Populate scratchpad contents
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 04/32] OMAP3: PM: PRCM context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 03/32] OMAP3: PM: INTC context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 02/32] OMAP3: PM: GPIO context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 01/32] OMAP3: PM: GPMC context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 00/32] OMAP3: PM: base off-mode support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 05/10] omap1: Fix DSP public peripherals support for ams-delta
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/10] omap2: Fix console serial port number for n8x0
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/10] omap: Fix detection of n8x0
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/10] omap4: Fix UART4 platform data on omap4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/10] omap4: Allow omap_serial_early_init() for OMAP4430 board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/10] omap3: PM: enable UART3 module wakeups
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/10] omap1: Fix redundant UARTs pin muxing that can break other hardware support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/10] omap: iommu: fix wrong condition check for SUPERSECTION
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/10] omap: SDMA: Fix omap_stop_dma() API for channel linking
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/10] omap: Fix omap-keypad by restoring old keypad.h without breaking omap2 boards that use matrix_keypad
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/10] omap fixes for v2.6.32-rc5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: mmci-omap regressions
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] mmci-omap: remove bogus check for host->iclk
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] mmci-omap: free irq resource
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH 01/17] PM: fix suspend control for IVA2
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• RE: [PATCH] updated mach-types file
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: [PATCH 2/2 v2] OMAP3:PM:SR: SmartReflex Refactor Rev3.0
  • From: "Imberton Guilhem-gimb01" <guilhem.imberton@xxxxxxxxxxxx>
• Re: omap eac.c file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: htc elf (omap850 based device)
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] updated mach-types file
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH V2]Omap3630: Add hsmmc related checks
  • From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
• RE: [PATCH]Omap3630: Add hsmmc related checks
  • From: "Madhusudhan" <madhu.cr@xxxxxx>
• RE: [PATCH]Omap3630: Add hsmmc related checks
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [PATCH resend] OMAP1: AMS_DELTA: Fix DSP public peripherals support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH resend] OMAP1: AMS_DELTA: Fix DSP public peripherals support
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• RE: [PATCH]Omap3630: Add hsmmc related checks
  • From: "Madhusudhan" <madhu.cr@xxxxxx>
• [APPLIED] [PATCH] ARM: OMAP3: cm-t35: add EHCI support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 2/2] ARM: OMAP3: cm-t35: add defconfig
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 1/2] ARM: OMAP3: add CompuLab CM-T35 module
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] ARM: OMAP3: evm: initialize vmmc and vmmc_aux regulators
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: Fix omap-keypad by restoring old keypad.h without breaking omap2 boards that use matrix_keypad
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH resend] OMAP1: AMS_DELTA: Fix DSP public peripherals support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP1: fix redundant UARTs pin muxing that can break other hardware support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omapfb: Wrong test on unsigned?
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH resend] OMAP1: AMS_DELTA: Fix DSP public peripherals support
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH]Zoom2: Setup HSMMC2 8-bit capability
  • From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
• Re: [PATCH]Omap3630: Add hsmmc related checks
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH]Omap HSMMC2 8-bit mux configuration
  • From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
• [PATCH]Omap3630:Configure HSMMC1 to 4-bit
  • From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
• [PATCH]Omap3630: Add hsmmc related checks
  • From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
• [PATCH 2/2 v2] OMAP3:PM:SR: SmartReflex Refactor Rev3.0
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/2 v2] OMAP3:PM:SR: prepare: remove old SR code
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/2 v2] OMAP3:PM: refactor Smart Reflex
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v3 2/2] OMAP3: add AMBA devices for ETM and ETB
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 4/4 v2] ASoC: TWL4030: Driver registration via twl4030_codec MFD
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/2] arm: a driver for on-chip ETM and ETB
  • From: Alexander Shishkin <virtuoso@xxxxxxxxx>
• [PATCH v3 2/2] OMAP3: add AMBA devices for ETM and ETB
  • From: Alexander Shishkin <virtuoso@xxxxxxxxx>
• Re: htc elf (omap850 based device)
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• [PATCH resend] OMAP1: AMS_DELTA: Fix DSP public peripherals support
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• RE: [PATCH] OMAP3: DVFS: No sdrc AC timing changes during core dvfs
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• [PATCH v2] twl4030: Enable low-power mode to 32kHz oscillator
  • From: Ilkka Koskinen <ilkka.koskinen@xxxxxxxxx>
• Re: [Resend PATCH 2/2] twl4030: Enable low-power mode to 32kHz oscillator
  • From: Ilkka Koskinen <ikoskine@xxxxxxxxx>
• Re: [PATCH 1/4] MFD: twl4030: add twl4030_codec MFD as a new child to the core
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH 1/4] MFD: twl4030: add twl4030_codec MFD as a new child to the core
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/4 v2] OMAP: Platform support for twl4030_codec MFD
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 4/4 v2] ASoC: TWL4030: Driver registration via twl4030_codec MFD
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 3/4 v2] ASoC: TWL4030: use the twl4030-codec.h for register descriptions
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 1/4 v2] MFD: twl4030: add twl4030_codec MFD as a new child to the core
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 0/4 v2] MFD/OMAP/ASoC: MFD device for twl4030 codec submodule
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH 01/17] PM: fix suspend control for IVA2
  • From: Paul Walmsley <paul@xxxxxxxxx>
• htc elf (omap850 based device)
  • From: Alexander Kaidalov <alexanderkaidalov@xxxxxxxxx>
• RE: [PATCH] OMAP3: DVFS: No sdrc AC timing changes during core dvfs
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: DSS2 clocking
  • From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
• Re: [PATCH 1/4] MFD: twl4030: add twl4030_codec MFD as a new child to the core
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• omap eac.c file
  • From: Belisko Marek <marek.belisko@xxxxxxxxx>
• Re: [PATCH V2] OMAP3:PM:Fix for Silicon bug on Context restore on OMAP3430
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH V2] OMAP3:PM:Fix for Silicon bug on Context restore on OMAP3430
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [PATCH V2] OMAP3:PM:Fix for Silicon bug on Context restore on OMAP3430
  • From: "Gopinath, Thara" <thara@xxxxxx>
• Re: [PATCH 1/4] MFD: twl4030: add twl4030_codec MFD as a new child to the core
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH] updated mach-types file
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH] OMAP1: AMS_DELTA: Fix DSP public peripherals support
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH] OMAP: timekeeping: time should not stop during suspend
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] MFD: twl4030: add twl4030_codec MFD as a new child to the core
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [Resend PATCH 1/2] twl4030: Do not dereference null pointer in error path
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [Resend PATCH 2/2] twl4030: Enable low-power mode to 32kHz oscillator
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: mmci-omap regressions
  • From: Ladislav.Michl@xxxxxxxxx
• Re: 24xx/n8x0 booting again, linux-omap updated to -rc5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Sitara ARM processor family announcement (v3)
  • From: "Kridner, Jason" <jdk@xxxxxx>
• [PATCH] OMAP: Fix omap-keypad by restoring old keypad.h without breaking omap2 boards that use matrix_keypad
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH] Re: [alsa-devel] Calling omap_pcm_prepare() results in BUG() on OMAP1
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v2 1/2] omap: add bits for future 3430/3630 ES revisions
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• [PATCH] OMAP1: fix redundant UARTs pin muxing that can break other hardware support
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• RE: [PATCH 09/17] OMAP3: PM: Ack pending interrupts before entering suspend
  • From: <Tero.Kristo@xxxxxxxxx>
• Re: [PATCH] OMAP: Fix broken omap-keypad
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] Fix broken NAND on Amstrad Delta
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] omapfb: Wrong test on unsigned?
  • From: Koen Kooi <k.kooi@xxxxxxxxxxxxxxxxxx>
• RE: [PATCH] omapfb: Wrong test on unsigned?
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• RE: [PATCH 16/17] OMAP3: PM: Write voltage and clock setup times dynamically in idle loop
  • From: <Tero.Kristo@xxxxxxxxx>
• Re: [PATCH] omapfb: Wrong test on unsigned?
  • From: Roel Kluin <roel.kluin@xxxxxxxxx>
• RE: [PATCH 12/17] OMAP2/3: Do not enable AUTOIDLE in interrupt controller
  • From: "Girish S G" <girishsg@xxxxxx>
• Re: [ANNOUNCE] updated PM branch, based on 2.6.32-rc1
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [ANNOUNCE] updated PM branch, based on 2.6.32-rc1
  • From: Jon Hunter <jon-hunter@xxxxxx>
• [PATCH] Re: [alsa-devel] Calling omap_pcm_prepare() results in BUG() on OMAP1
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH] OMAP: Fix broken omap-keypad
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH 09/17] OMAP3: PM: Ack pending interrupts before entering suspend
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 16/17] OMAP3: PM: Write voltage and clock setup times dynamically in idle loop
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: FW: [PATCH V2] OMAP3:PM:Fix for Silicon bug on Context restore on OMAP3430
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• DSS2 clocking
  • From: Gary Thomas <gary@xxxxxxxxxxxx>
• Re: stable kernel version
  • From: Janosch Machowinski <scotch@xxxxxx>
• Re: Fwd: mmap /dev/mem in python
  • From: Brett Graham <graham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] OMAP3: Only update pm-counters when needed
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• [PATCH V4 3/3] OMAP: I2C: Add mpu wake up latency constraint in i2c
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• [PATCH 0/3] PM: Misc latency fixes
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• [PATCH 2/3] PM: Skip PER previous state register read
  • From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
• Re: [PATCH] Fix broken NAND on Amstrad Delta
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH] mmci-omap: remove bogus check for host->iclk
  • From: Ladislav.Michl@xxxxxxxxx
• [PATCH] mmci-omap: free irq resource
  • From: Ladislav.Michl@xxxxxxxxx
• [PATCH] Re: [alsa-devel] Calling omap_pcm_prepare() results in BUG() on OMAP1
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• RE: [PATCH 17/17] OMAP3: PM: Force disable OTG autoidle
  • From: <Tero.Kristo@xxxxxxxxx>
• RE: [PATCH 08/17] OMAP2/3: GPTIMER: Clear pending interrupts when entering suspend
  • From: <Tero.Kristo@xxxxxxxxx>
• RE: [PATCH 09/17] OMAP3: PM: Ack pending interrupts before entering suspend
  • From: <Tero.Kristo@xxxxxxxxx>
• RE: [PATCH 16/17] OMAP3: PM: Write voltage and clock setup times dynamically in idle loop
  • From: <Tero.Kristo@xxxxxxxxx>
• Re: [PATCH 0/4] twl4030 codec as MFD device
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [APPLIED] [PATCH] [RFC] OMAP: eliminate OMAP_MAX_NR_PORTS
  • From: Ladislav.Michl@xxxxxxxxx
• Re: [alsa-devel] Calling omap_pcm_prepare() results in BUG() on OMAP1
  • From: Jarkko Nikula <jhnikula@xxxxxxxxx>
• [PATCH 2/2] ARM: OMAP3: cm-t35: add defconfig
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH 1/2] ARM: OMAP3: add CompuLab CM-T35 module
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• [PATCH 0/2 v3] ARM: OMAP3: add support for cm-t35 board
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• FW: [PATCH V2] OMAP3:PM:Fix for Silicon bug on Context restore on OMAP3430
  • From: "Gulati, Shweta" <shweta.gulati@xxxxxx>
• RE: [PATCH 12/17] OMAP2/3: Do not enable AUTOIDLE in interrupt controller
  • From: "Gopinath, Thara" <thara@xxxxxx>
• RE: [PATCH] OMAP3: DVFS: No sdrc AC timing changes during core dvfs
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Calling omap_pcm_prepare() results in BUG() on OMAP1
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• [PATCH] Fix broken NAND on Amstrad Delta
  • From: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
• Re: [PATCH] OMAP3: DVFS: No sdrc AC timing changes during core dvfs
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH v2 1/2] omap: add bits for future 3430/3630 ES revisions
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH v2 1/2] omap: add bits for future 3430/3630 ES revisions
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH] Fix broken NAND on Amstrad Delta
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [APPLIED] [PATCH] [RFC] OMAP: eliminate OMAP_MAX_NR_PORTS
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: Fwd: mmap /dev/mem in python
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: Fwd: mmap /dev/mem in python
  • From: Brett Graham <graham@xxxxxxxxxxxxxxxxxxx>
• Re: Fwd: mmap /dev/mem in python
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: mmap /dev/mem in python
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Fwd: mmap /dev/mem in python
  • From: Brett Graham <graham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] omap: add bits for future 3430/3630 ES revisions
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [APPLIED] [PATCH] [RFC] OMAP: eliminate OMAP_MAX_NR_PORTS
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: John Rigby <jcrigby@xxxxxxxxx>
• RE: MMC_CAP_SDIO_IRQ for omap 3430
  • From: "Madhusudhan" <madhu.cr@xxxxxx>
• [PATCH v2 2/2] omap: 3630: update is_chip variable
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [PATCH v2 1/2] omap: add bits for future 3430/3630 ES revisions
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• [ANNOUNCE] updated dspbridge on linux-omap
  • From: "Ramirez Luna, Omar" <omar.ramirez@xxxxxx>
• Re: mmap /dev/mem in python
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [APPLIED] [PATCH] [RFC] OMAP: eliminate OMAP_MAX_NR_PORTS
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: 24xx/n8x0 booting again, linux-omap updated to -rc5
  • From: green <greenfreedom10@xxxxxxxxx>
• mmap /dev/mem in python
  • From: Brett Graham <graham@xxxxxxxxxxxxxxxxxxx>
• Re: [APPLIED] [PATCH] [RFC] OMAP: eliminate OMAP_MAX_NR_PORTS
  • From: Ladislav.Michl@xxxxxxxxx
• [PATCH 2/2 v2] OMAP3:clk - introduce DPLL4 jtype support
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCHV2] OMAP3: PM: Removing redundant and potentially dangerous PRCM configration
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [APPLIED] [PATCH 1/2] omap iovmm: remove cache flush operation
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH] omap iommu: avoid remapping if it&#39;s been mapped in MPU side
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 1/1] omap iommu: fix wrong condition check for SUPERSECTION
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 06/17] OMAP3: PM: Added next state check for IVA2, USB and PER into idle loop
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/4] OMAP: Platform support for twl4030_codec MFD
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: 24xx/n8x0 booting again, linux-omap updated to -rc5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: Steve Sakoman <sakoman@xxxxxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: John Rigby <jcrigby@xxxxxxxxx>
• Re: [PATCH 17/17] OMAP3: PM: Force disable OTG autoidle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v2] ARM: OMAP: SDMA: Fix omap_stop_dma() API for channel linking
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH v2] ARM: OMAP: SDMA: Fix omap_stop_dma() API for channel linking
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [RFC][Patch] OMAP3 PM: sysfs vdd_opp change to use ConstraintFramework
  • From: "Girish S G" <girishsg@xxxxxx>
• Re: [PATCH 16/17] OMAP3: PM: Write voltage and clock setup times dynamically in idle loop
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3b/6] omap: Split vmalloc.h for mach-omap1 and mach-omap2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 11/17] Make USBHOST powerdomain go to sleep after warm reset.
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/2 v2] ARM: OMAP3: add support for cm-t35 board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 08/17] OMAP2/3: GPTIMER: Clear pending interrupts when entering suspend
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 09/17] OMAP3: PM: Ack pending interrupts before entering suspend
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 05/17] OMAP:PM: Precedence fix
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 04/17] OMAP3: PM: Do not enable IO wake-up on boot
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 03/17] PM: Block CORE off when DSS is active
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 3b/6] omap: Split vmalloc.h for mach-omap1 and mach-omap2
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• Re: [RFC][Patch] OMAP3 PM: sysfs vdd_opp change to use Constraint Framework
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 5/6] omap: headers: Create headers necessary for compile under mach-omap1 and mach-omap2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3b/6] omap: Split vmalloc.h for mach-omap1 and mach-omap2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: timekeeping: time should not stop during suspend
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 12/17] OMAP2/3: Do not enable AUTOIDLE in interrupt controller
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: 24xx/n8x0 booting again, linux-omap updated to -rc5
  • From: green <greenfreedom10@xxxxxxxxx>
• RE: [PATCH 12/17] OMAP2/3: Do not enable AUTOIDLE in interrupt controller
  • From: "Girish S G" <girishsg@xxxxxx>
• Re: [PATCH 02/17] OMAP3: PM: Dynamic check for CORE target state
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 12/17] OMAP2/3: Do not enable AUTOIDLE in interrupt controller
  • From: <Tero.Kristo@xxxxxxxxx>
• Re: [PATCH 01/17] PM: fix suspend control for IVA2
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 12/17] OMAP2/3: Do not enable AUTOIDLE in interrupt controller
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC][Patch] OMAP3 PM: sysfs vdd_opp change to use Constraint Framework
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] OMAP3: PM: Configure CPUidle latencies/thresholds from board file
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] OMAP3: PM: Configure PRM setup times from board files
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 2/2] OMAP3:clk: introduce DPLL4 jtype support
  • From: "Menon, Nishanth" <nm@xxxxxx>
• RE: [PATCH 2/2] OMAP3:clk: introduce DPLL4 jtype support
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: OMAP2420-HS flashing question
  • From: Andrejs Cainikovs <andrejsc@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 2/2] OMAP3:clk: introduce DPLL4 jtype support
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• [Resend PATCH 2/2] twl4030: Enable low-power mode to 32kHz oscillator
  • From: Ilkka Koskinen <ilkka.koskinen@xxxxxxxxx>
• [Resend PATCH 1/2] twl4030: Do not dereference null pointer in error path
  • From: Ilkka Koskinen <ilkka.koskinen@xxxxxxxxx>
• RE: [PATCH 1/2] twl4030: Do not dereference null pointer in error path
  • From: <ilkka.koskinen@xxxxxxxxx>
• Re: [PATCH 4/4] ASoC: TWL4030: Driver registration via twl4030_codec MFD
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH 4/4] ASoC: TWL4030: Driver registration via twl4030_codec MFD
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 4/4] ASoC: TWL4030: Driver registration via twl4030_codec MFD
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [alsa-devel] [PATCH 1/4] MFD: twl4030: add twl4030_codec MFD as a new child to the core
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 2/2] OMAP3:clk: introduce DPLL4 jtype support
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 0/2] OMAP3: introduce DPLL4 Jtype
  • From: Nishanth Menon <nm@xxxxxx>
• [PATCH 1/2] OMAP3: move check_revision above check_features
  • From: Nishanth Menon <nm@xxxxxx>
• Re: [PATCH 4/4] ASoC: TWL4030: Driver registration via twl4030_codec MFD
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/4] MFD: twl4030: add twl4030_codec MFD as a new child to the core
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/5] mfd: twl4030-power: Rename DEVGROUP to DEV_GRP
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] mfd: twl4030-power: Optimised power scripts for the rx51
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• [PATCH V2] FIX OMAP3:McBSP poll read and write for OMAP3
  • From: charu@xxxxxx
• RE: [PATCH 08/14] omap: Use ioremap for omap4 L4 code
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [PATCH 11/14] omap: Remap L3, L4 to get more kernel io address space
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [PATCH v2] ARM: OMAP: SDMA: Fix omap_stop_dma() API for channel linking
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH 0/2 v2] ARM: OMAP3: add support for cm-t35 board
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] mfd: twl4030-power: Rename DEVGROUP to DEV_GRP
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• RE: MMC_CAP_SDIO_IRQ for omap 3430
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: John Rigby <jcrigby@xxxxxxxxx>
• Re: [PATCH 11/14] omap: Remap L3, L4 to get more kernel io address space
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH] omap: 3630: update is_chip variable
  • From: "Menon, Nishanth" <nm@xxxxxx>
• Re: [PATCH 5/5] mfd: twl4030-power: Optimised power scripts for the rx51
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Plat header changes merged, script to convert existing patches
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [APPLIED] [PATCH 1/1] OMAP3: PM: enable UART3 module wakeups
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/1] dying serial console in PM branch
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH] omap: 3630: update is_chip variable
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: [PATCH] omap: 3630: update is_chip variable
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• [PATCH 1/1] OMAP3: PM: enable UART3 module wakeups
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/1] dying serial console in PM branch
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH] omap: 3630: update is_chip variable
  • From: Vikram Pandita <vikram.pandita@xxxxxx>
• OMAP3 <-> FPGA boot-delay
  • From: "Jerry Johns" <Jerry.Johns@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] arm: a driver for on-chip ETM and ETB
  • From: Linus Walleij <linus.ml.walleij@xxxxxxxxx>
• Re: OMAP2420-HS flashing question
  • From: Andrejs Cainikovs <AndrejsC@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] mfd: twl4030-power: Move power-related data closer together in the header file
  • From: Jean Delvare <khali@xxxxxxxxxxxx>
• Re: [PATCH 1/5] mfd: twl4030-power: Rename DEVGROUP to DEV_GRP
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH 5/5] mfd: twl4030-power: Optimised power scripts for the rx51
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/5] mfd: twl4030-power: Move power-related data closer together in the header file
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• RE: OMAP2420-HS flashing question
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• RE: [PATCH 12/17] OMAP2/3: Do not enable AUTOIDLE in interrupt controller
  • From: "Girish S G" <girishsg@xxxxxx>
• RE: [PATCH 01/17] PM: fix suspend control for IVA2
  • From: "Girish S G" <girishsg@xxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• Re: OMAP2420-HS flashing question
  • From: Vladimir Pantelic <pan@xxxxxxxxxxxxxxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• RE: [PATCH 08/14] omap: Use ioremap for omap4 L4 code
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• Re: [PATCH 0/2 v2] ARM: OMAP3: add support for cm-t35 board
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: OMAP3: add CompuLab CM-T35 module
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: stable kernel version
  • From: "Maldonado Zambrano, Ivan" <ivan.maldonado@xxxxxx>
• Re: [PATCH 08/14] omap: Use ioremap for omap4 L4 code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• OMAP2420-HS flashing question
  • From: Andrejs Cainikovs <andrejsc@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: stable kernel version
  • From: Ameya Palande <2ameya@xxxxxxxxx>
• [APPLIED] [PATCH] ARM: OMAP4: Fix UART4 platform data
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: MMC_CAP_SDIO_IRQ for omap 3430
  • From: "Madhusudhan" <madhu.cr@xxxxxx>
• [APPLIED] [PATCH] ARM: OMAP4: Allow omap_serial_early_init() for OMAP4430
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH v2] ARM: OMAP: SDMA: Fix omap_stop_dma() API for channel linking
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH 12/17] OMAP2/3: Do not enable AUTOIDLE in interrupt controller
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• RE: [PATCH 08/14] omap: Use ioremap for omap4 L4 code
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• RE: stable kernel version
  • From: "Maldonado Zambrano, Ivan" <ivan.maldonado@xxxxxx>
• Re: Bug on "omap: ioremap fixes for omap4"
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 08/14] omap: Use ioremap for omap4 L4 code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: stable kernel version
  • From: Janosch Machowinski <scotch@xxxxxx>
• Bug on "omap: ioremap fixes for omap4"
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• Re: [PATCH 1/2] twl4030: Do not dereference null pointer in error path
  • From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
• RE: MMC_CAP_SDIO_IRQ for omap 3430
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• RE: stable kernel version
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• Re: stable kernel version
  • From: Janosch Machowinski <scotch@xxxxxx>
• Re: [PATCH 0/2 v2] ARM: OMAP3: add support for cm-t35 board
  • From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
• Re: [PATCH 3/4] ASoC: TWL4030: Only update the needed bits in *set_dai_sysclk
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• Re: [PATCH v2 1/2] arm: a driver for on-chip ETM and ETB
  • From: Alexander Shishkin <virtuoso@xxxxxxxxx>
• Re: [PATCH 3/4] ASoC: TWL4030: Only update the needed bits in *set_dai_sysclk
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/4] OMAP: Platform support for twl4030_codec MFD
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 0/4] twl4030 codec as MFD device
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 4/4] ASoC: TWL4030: Driver registration via twl4030_codec MFD
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 3/4] ASoC: TWL4030: Only update the needed bits in *set_dai_sysclk
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 1/4] MFD: twl4030: add twl4030_codec MFD as a new child to the core
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH 5/5] mfd: twl4030-power: Optimised power scripts for the rx51
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• [PATCH 1/5] mfd: twl4030-power: Rename DEVGROUP to DEV_GRP
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• [PATCH 3/5] mfd: twl4030-power: Move power-related data closer together in the header file
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• [PATCH 4/5] mfd: twl4030-power: Add support for remapping power states
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• [PATCH 2/5] mfd: twl4030-power: Add comments for the register and bit layout
  • From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
• RE: [PATCH 12/17] OMAP2/3: Do not enable AUTOIDLE in interrupt controller
  • From: <Tero.Kristo@xxxxxxxxx>
• RE: [PATCH 03/17] PM: Block CORE off when DSS is active
  • From: <Tero.Kristo@xxxxxxxxx>
• Re: [PATCH 6/8] RX-51: Audio: Add usage of regulator framework to control VMMC2
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/8] RX-51: Audio: Add usage of regulator framework to control VMMC2
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 01/17] PM: fix suspend control for IVA2
  • From: <Tero.Kristo@xxxxxxxxx>
• Re: [PATCH 6/8] RX-51: Audio: Add usage of regulator framework to control VMMC2
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• RE: [PATCH 08/14] omap: Use ioremap for omap4 L4 code
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH 08/14] omap: Use ioremap for omap4 L4 code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 05/14] omap: Use ioremap in gpio.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: John Rigby <jcrigby@xxxxxxxxx>
• RE: MMC_CAP_SDIO_IRQ for omap 3430
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• Re: [PATCH 08/14] omap: Use ioremap for omap4 L4 code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 05/14] omap: Use ioremap in gpio.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: John Rigby <jcrigby@xxxxxxxxx>
• RE: [PATCH 08/14] omap: Use ioremap for omap4 L4 code
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH 05/14] omap: Use ioremap in gpio.c
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: hrtimer_nanosleep() weirdness...
  • From: michael <michael@xxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH 12/14] arch/arm/plat-omap: Drop an unnecessary NULL test
  • From: Julia Lawall <julia@xxxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• Re: 24xx/n8x0 booting again, linux-omap updated to -rc5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 08/14] omap: Use ioremap for omap4 L4 code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 14/14] omap: Add OMAP4 L3 and L4 peripherals.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 13/14] omap: Fix DEBUG_LL UART io address
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 12/14] omap: Move SRAM map to claim more io space
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 11/14] omap: Remap L3, L4 to get more kernel io address space
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 10/14] omap: Split OMAP2_IO_ADDRESS to L3 and L4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 09/14] omap: Use ioremap in dispc.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 08/14] omap: Use ioremap for omap4 L4 code
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 07/14] omap: Use getnstimeofday for omap_device
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 06/14] omap: Use ioremap in omap_hwmod.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 05/14] omap: Use ioremap in gpio.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 04/14] omap: Use ioremap in dmtimer.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 03/14] omap: Use ioremap in dma.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 02/14] omap: Use ioremap in irq.c
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 01/14] omap: Change low-level serial init to use ioremap
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 00/14] Use ioremap for omap, split OMAP2_IO_ADDRESS for more space
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: John Rigby <jcrigby@xxxxxxxxx>
• RE: MMC_CAP_SDIO_IRQ for omap 3430
  • From: "Madhusudhan" <madhu.cr@xxxxxx>
• Re: [PATCH] CPUidle: always return with interrupts enabled
  • From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] omapfb: Wrong test on unsigned?
  • From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: John Rigby <jcrigby@xxxxxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• hrtimer_nanosleep() weirdness...
  • From: Peter Barada <peterb@xxxxxxxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• RE: [RFC][Patch] OMAP3 PM: sysfs vdd_opp change to use Constraint Framework
  • From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
• [RFC][Patch] OMAP3 PM: sysfs vdd_opp change to use Constraint Framework
  • From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: John Rigby <jcrigby@xxxxxxxxx>
• [PATCH] omapfb: Wrong test on unsigned?
  • From: Roel Kluin <roel.kluin@xxxxxxxxx>
• RE: [PATCH 12/17] OMAP2/3: Do not enable AUTOIDLE in interrupt controller
  • From: "Girish S G" <girishsg@xxxxxx>
• RE: [PATCH 12/17] OMAP2/3: Do not enable AUTOIDLE in interrupt controller
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• RE: [PATCH 12/17] OMAP2/3: Do not enable AUTOIDLE in interrupt controller
  • From: "Girish S G" <girishsg@xxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: "Madhusudhan Chikkature" <madhu.cr@xxxxxx>
• RE: [PATCH 01/17] PM: fix suspend control for IVA2
  • From: "Girish S G" <girishsg@xxxxxx>
• Re: [PATCH] CPUidle: always return with interrupts enabled
  • From: Martin Michlmayr <tbm@xxxxxxxxxx>
• Re: [PATCH] omap: Use ioremap for omap_hwmod instead of OMAP2_IO_ADDRESS
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH] omap: Use getnstimeofday for omap_device
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [alsa-devel] [PATCH 5/8] board-rx51-peripherals: split vaux3 and vmmc2 supplies
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: John Rigby <jcrigby@xxxxxxxxx>
• [PATCHV2] OMAP3: PM: Removing redundant and potentially dangerous PRCM configration
  • From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
• Re: stable kernel version
  • From: Phil Carmody <ext-phil.2.carmody@xxxxxxxxx>
• Re: [RFC][Patch V1] OMAP3: Mux Changes.
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: stable kernel version
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: [PATCH 03/17] PM: Block CORE off when DSS is active
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: stable kernel version
  • From: Janosch Machowinski <scotch@xxxxxx>
• Re: [RFC][Patch V1] OMAP3: Mux Changes.
  • From: Nishanth Menon <nm@xxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• RE: [PATCH 06/17] OMAP3: PM: Added next state check for IVA2, USB and PER into idle loop
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: stable kernel version
  • From: Janosch Machowinski <scotch@xxxxxx>
• RE: [PATCH 12/17] OMAP2/3: Do not enable AUTOIDLE in interrupt controller
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• RE: [PATCH 1/2] twl4030: Do not dereference null pointer in error path
  • From: <ilkka.koskinen@xxxxxxxxx>
• Re: [RFC][Patch V1] OMAP3: Mux Changes.
  • From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
• [PATCH v2] TWL4030: Initial support for TWL5031
  • From: Ilkka Koskinen <ilkka.koskinen@xxxxxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: John Rigby <jcrigby@xxxxxxxxx>
• RE: [PATCH 06/17] OMAP3: PM: Added next state check for IVA2, USB and PER into idle loop
  • From: <Tero.Kristo@xxxxxxxxx>
• RE: [PATCH 06/17] OMAP3: PM: Added next state check for IVA2, USB and PER into idle loop
  • From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
• [PATCH v3 2/2] OMAP3: PM: Configure CPUidle latencies/thresholds from board file
  • From: Rajendra Nayak <rnayak@xxxxxx>
• RE: [PATCH] OMAP3: PM: Removing redundant and potentially dangerous PRCM configration
  • From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
• [PATCH] OMAP3: GPIO: Added dynamic control logic for pad wakeups
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• RE: [PATCH] OMAP3: PM: Removing redundant and potentially dangerous PRCM configration
  • From: "Gopinath, Thara" <thara@xxxxxx>
• [PATCH 12/17] OMAP2/3: Do not enable AUTOIDLE in interrupt controller
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 16/17] OMAP3: PM: Write voltage and clock setup times dynamically in idle loop
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 17/17] OMAP3: PM: Force disable OTG autoidle
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 15/17] OMAP3: PM: Added support for L2 aux ctrl register save and restore
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 05/17] OMAP:PM: Precedence fix
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 04/17] OMAP3: PM: Do not enable IO wake-up on boot
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 13/17] OMAP3: Fixed ARM aux ctrl register save/restore
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 10/17] OMAP3: PM: Enable system control module autoidle
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 11/17] Make USBHOST powerdomain go to sleep after warm reset.
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 03/17] PM: Block CORE off when DSS is active
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 14/17] OMAP3: PM: Disabled I2C4 repeated start operation mode
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 02/17] OMAP3: PM: Dynamic check for CORE target state
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 09/17] OMAP3: PM: Ack pending interrupts before entering suspend
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 08/17] OMAP2/3: GPTIMER: Clear pending interrupts when entering suspend
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 07/17] OMAP3: Disable Smartreflex before pwrdm enters RET
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 06/17] OMAP3: PM: Added next state check for IVA2, USB and PER into idle loop
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 00/17] Misc PM patches
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• [PATCH 01/17] PM: fix suspend control for IVA2
  • From: Tero Kristo <tero.kristo@xxxxxxxxx>
• RE: [PATCH V2] OMAP3: PM: Fix for MPU power domain MEM BANK position
  • From: "Gopinath, Thara" <thara@xxxxxx>
• RE: [PATCH V2] OMAP3: PM: Fix for MPU power domain MEM BANK position
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: MMC_CAP_SDIO_IRQ for omap 3430
  • From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
• RE: [PATCH v2 2/2] OMAP3: PM: Configure CPUidle latencies/thresholds from board file
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• RE: [PATCH] ARM: OMAP: SDMA: Fix omap_stop_dma() API for channel linking
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [RFC][Patch V1] OMAP3: Mux Changes.
  • From: Nishanth Menon <nm@xxxxxx>
• RE: [RFC][Patch V1] OMAP3: Mux Changes.
  • From: "Pais, Allen" <allen.pais@xxxxxx>
• 24xx/n8x0 booting again, linux-omap updated to -rc5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH] OMAP3: PM: Removing redundant and potentially dangerous PRCM configration
  • From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
• MMC_CAP_SDIO_IRQ for omap 3430
  • From: John Rigby <jcrigby@xxxxxxxxx>
• Re: [PATCH] ARM: OMAP: SDMA: Fix omap_stop_dma() API for channel linking
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• OMAP2420 HS flashing newbie question
  • From: Andrejs Cainikovs <andrejsc@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• [PATCH] OMAP3: PM: Removing redundant and potentially dangerous PRCM configration
  • From: "Sripathy, Vishwanath" <vishwanath.bs@xxxxxx>
• [PATCH v2 1/2] OMAP3: PM: Configure PRM setup times from board files
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 2/2] OMAP3: PM: Configure CPUidle latencies/thresholds from board file
  • From: Rajendra Nayak <rnayak@xxxxxx>
• [PATCH v2 0/2] OMAP3: PM: Make PRM setup times and CPUidle latencies/threshold board specific
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• RE: SMP: BUG with PREEMPT enabled
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: SMP: BUG with PREEMPT enabled
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [RFC][Patch V1] OMAP3: Mux Changes.
  • From: "Menon, Nishanth" <nm@xxxxxx>
• RE: [RFC][Patch V1] OMAP3: Mux Changes.
  • From: "Menon, Nishanth" <nm@xxxxxx>
• RE: [PATCH] OMAP3: Fix McBSP poll read and write for 32bit reg access
  • From: "Varadarajan, Charu Latha" <charu@xxxxxx>
• Re: SMP: BUG with PREEMPT enabled
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: Memory performance / Cache problem
  • From: epsi@xxxxxx
• RE: [PATCH v2] OMAP3: introduce OMAP3630
  • From: "Hemanth V" <hemanthv@xxxxxx>
• RE: [PATCH V2] OMAP3: PM: Fix for MPU power domain MEM BANK position
  • From: "Gopinath, Thara" <thara@xxxxxx>
• [RFC][Patch V1] OMAP3: Mux Changes.
  • From: "Pais, Allen" <allen.pais@xxxxxx>
• RE: [PATCH v2] OMAP3: introduce OMAP3630
  • From: "Pais, Allen" <allen.pais@xxxxxx>
• Re: [alsa-devel] [PATCH 5/8] board-rx51-peripherals: split vaux3 and vmmc2 supplies
  • From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
• RE: [PATCH] OMAP3: Fix McBSP poll read and write for 32bit reg access
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• Re: [PATCH] OMAP3: Fix McBSP poll read and write for 32bit reg access
  • From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
• [PATCH v2] ARM: OMAP: SDMA: Fix omap_stop_dma() API for channel linking
  • From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
• RE: [PATCH] OMAP3: Fix McBSP poll read and write for 32bit reg access
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [PATCH] OMAP3: Fix McBSP poll read and write for 32bit reg access
  • From: "Varadarajan, Charu Latha" <charu@xxxxxx>
• RE: [PATCH] OMAP3: Fix McBSP poll read and write for 32bit reg access
  • From: "Varadarajan, Charu Latha" <charu@xxxxxx>
• RE: SMP: BUG with PREEMPT enabled
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [PATCH] ARM: OMAP: SDMA: Fix omap_stop_dma() API for channel linking
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• [GIT PULL] omap fixes for v2.6.32-rc4
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 0/2] OMAP clock and clockdomain fixes for 2.6.29-rc5
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/17] Massive OMAP730/OMAP850 cleanup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/17] Massive OMAP730/OMAP850 cleanup
  • From: Alistair Buxton <a.j.buxton@xxxxxxxxx>
• Re: [PATCH 0/2] OMAP clock and clockdomain fixes for 2.6.29-rc5
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH V2] OMAP3: PM: Fix for MPU power domain MEM BANK position
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 6/6] omap: headers: Move remaining headers from include/mach to include/plat
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/6] omap: headers: Add mach patch to include files
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/2] OMAP2xxx clock: set up clockdomain pointer in struct clk
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 0/2] OMAP clock and clockdomain fixes for 2.6.29-rc5
  • From: Paul Walmsley <paul@xxxxxxxxx>
• [PATCH 1/2] OMAP: Fix race condition with autodeps
  • From: Paul Walmsley <paul@xxxxxxxxx>
• Re: [PATCH 08/27] OMAP3: PM: handle PER/NEON/CORE in idle
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 07/27] OMAP3: PM: SRAM restore function
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] OMAP: PM: Export functions from OMAP NOOP PM interface
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 03/27] OMAP3: PM: INTC context save/restore
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 02/27] OMAP3: PM: GPIO context save/restore
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 24/27] PM: Disable usb host HW save and restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 01/27] OMAP3: PM: GPMC context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 27/27] PM debug: allow configurable wakeup from suspend on OMAP GPtimer
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 20/27] OMAP: PM: Clear DMA channel state after a wakeup
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 19/27] OMAP3: PM: Fix PLL_MOD CLKEN offset in scratchpad
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 18/27] ARM: OMAP: Add missing SMS_SYSCONFIG save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 17/27] OMAP3: PM: Fix secure SRAM context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 16/27] OMAP3: PM: Save and restore also CM_CLKSEL1_PLL_IVA2
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 14/27] OMAP3: PM: save secure RAM only during init
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 11/27] OMAP3: PM: CORE domain off-mode support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 10/27] OMAP3: PM: MPU off-mode support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 25/27] OMAP3: PM: Wait for SDRC ready iso a blind delay
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 26/27] OMAP3: PM debug: allow runtime toggle of PM features
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 07/27] OMAP3: PM: SRAM restore function
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 06/27] OMAP3: PM: SCM context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 02/27] OMAP3: PM: GPIO context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 23/27] OMAP3: PM: Fix INTC context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 22/27] OMAP3: PM: SDRC auto-refresh workaround for off-mode
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 21/27] OMAP: Store reboot mode in scratchpad on OMAP34xx
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 15/27] OMAP3: PM: Enable SDRAM auto-refresh during sleep
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 13/27] OMAP3 PM: off-mode support for HS/EMU devices
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 12/27] OMAP: PM: DMA context save/restore for off-mode support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 09/27] OMAP3: PM: Restore MMU table entry
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 08/27] OMAP3: PM: handle PER/NEON/CORE in idle
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 05/27] OMAP3: PM: Populate scratchpad contents
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 04/27] OMAP3: PM: PRCM context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 03/27] OMAP3: PM: INTC context save/restore
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 00/27] OMAP3: PM: base off-mode support
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• [PATCH 5/6] omap: headers: Create headers necessary for compile under mach-omap1 and mach-omap2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 4/6] omap: headers: Move mtd-xip.h to be mach-omap1 specific
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 3/6] omap: headers: Split entry-macro.S for mach-omap1 and mach-omap2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 2/6] omap: headers: Split debug-macro.S for mach-omap1 and mach-omap2
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 1/6] omap: headers: Add mach patch to include files
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• [PATCH 0/6] Reorganize omap headers to have include/plat
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 00/17] Massive OMAP730/OMAP850 cleanup
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: SMP: BUG with PREEMPT enabled
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: stable kernel version
  • From: Janosch Machowinski <scotch@xxxxxx>
• [PATCH 17/17] OMAP850: Fix zImage booting
  • From: Alistair Buxton <a.j.buxton@xxxxxxxxx>
• [PATCH 16/17] OMAP850: PM: Add an ARCH_OMAP850 check
  • From: Alistair Buxton <a.j.buxton@xxxxxxxxx>
• [PATCH 15/17] OMAP7XX: Clocks: Add ck_ref and armxor
  • From: Alistair Buxton <a.j.buxton@xxxxxxxxx>
• [PATCH 14/17] OMAP7XX: omap_uwire.c: Convert to omap7xx.h
  • From: Alistair Buxton <a.j.buxton@xxxxxxxxx>
• [PATCH 13/17] OMAP7XX: Rename all the rest of the omap730 references in omap1 core
  • From: Alistair Buxton <a.j.buxton@xxxxxxxxx>
• [PATCH 12/17] OMAP7XX: Replace omap730 references in irqs.h and all users
  • From: Alistair Buxton <a.j.buxton@xxxxxxxxx>
• [PATCH 11/17] OMAP7XX: Update core omap1 files to use omap7xx.h
  • From: Alistair Buxton <a.j.buxton@xxxxxxxxx>
• [PATCH 10/17] OMAP7XX: Create omap7xx.h
  • From: Alistair Buxton <a.j.buxton@xxxxxxxxx>
• [PATCH 09/17] OMAP7XX: McBSP: Add omap850 support
  • From: Alistair Buxton <a.j.buxton@xxxxxxxxx>
• [PATCH 08/17] OMAP7XX: Clocks: Add omap850 support
  • From: Alistair Buxton <a.j.buxton@xxxxxxxxx>
• [PATCH 07/17] OMAP7XX: PM: Add omap850 support
  • From: Alistair Buxton <a.j.buxton@xxxxxxxxx>
• [PATCH 05/17] OMAP7XX: USB: Remove duplicate omap850 code
  • From: Alistair Buxton <a.j.buxton@xxxxxxxxx>
• [PATCH 04/17] OMAP7XX: Mux: Remove duplicate omap850 code
  • From: Alistair Buxton <a.j.buxton@xxxxxxxxx>
• [PATCH 03/17] OMAP7XX: IO: Remove duplicate omap850 code
  • From: Alistair Buxton <a.j.buxton@xxxxxxxxx>
• [PATCH 06/17] OMAP7XX: IRQ: Remove duplicate omap850 code
  • From: Alistair Buxton <a.j.buxton@xxxxxxxxx>
• [PATCH 02/17] OMAP7XX: GPIO: Remove duplicate omap850 code
  • From: Alistair Buxton <a.j.buxton@xxxxxxxxx>
• [PATCH 01/17] OMAP7XX: Serial: Remove duplicate omap850 code
  • From: Alistair Buxton <a.j.buxton@xxxxxxxxx>
• [PATCH 00/17] Massive OMAP730/OMAP850 cleanup
  • From: Alistair Buxton <a.j.buxton@xxxxxxxxx>
• Re: stable kernel version
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: Discussion: OMAP: PM: opp table handling
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• RE: Memory performance / Cache problem
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: stable kernel version
  • From: Janosch Machowinski <scotch@xxxxxx>
• Re: Memory performance / Cache problem
  • From: Siarhei Siamashka <siarhei.siamashka@xxxxxxxxx>
• RE: RE: RE: RE: Memory performance / Cache problem
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: stable kernel version
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: Discussion: OMAP: PM: opp table handling
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• Re: RE: RE: RE: Memory performance / Cache problem
  • From: epsi@xxxxxx
• Re: [alsa-devel] [PATCH 5/8] board-rx51-peripherals: split vaux3 and vmmc2 supplies
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] ARM: OMAP: SDMA: Fix omap_stop_dma() API for channel linking
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH 1/6] omap: Fix Unlikely(x) < y
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• RE: Discussion: OMAP: PM: opp table handling
  • From: "Menon, Nishanth" <nm@xxxxxx>
• RE: Discussion: OMAP: PM: opp table handling
  • From: "Cousson, Benoit" <b-cousson@xxxxxx>
• RE: RE: RE: Memory performance / Cache problem
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: RE: RE: Memory performance / Cache problem
  • From: epsi@xxxxxx
• RE: [PATCH] twl4030: Initial support for twl5031
  • From: <ilkka.koskinen@xxxxxxxxx>
• Re: mux strategy (was RE: [PATCH] [OMAP1] mux: Add MMC mux pins for omap7xx)
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: patch: add omap730 / omap850 rtc support
  • From: Christopher Friedt <chrisfriedt@xxxxxxxxx>
• RE: patch: add omap730 / omap850 rtc support
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
• Re: patch: add omap730 / omap850 rtc support
  • From: Christopher Friedt <chrisfriedt@xxxxxxxxx>
• RE: RE: Memory performance / Cache problem
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: patch: add omap730 / omap850 rtc support
  • From: Christopher Friedt <chrisfriedt@xxxxxxxxx>
• RE: [PATCH RESEND] I2C: OMAP: Add missing wakeup events
  • From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
• Re: Broken cpuidle on PM branch?
  • From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
• Re: [PATCH 2/3] OMAP3: PM: Configure PRM setup times from board files
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• Re: Broken cpuidle on PM branch?
  • From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH 2/3] OMAP3: PM: Configure PRM setup times from board files
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• RE: [PATCH 1/2] ARM: OMAP3: Add support for the IGEP v2 board (rev B)
  • From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
• RE: [PATCH 0/3] OMAP3: PM: Make PRM setup times and CPUidle latencies/threshold board specific
  • From: "Nayak, Rajendra" <rnayak@xxxxxx>
• RE: SMP: BUG with PREEMPT enabled
  • From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
• RE: [PATCH] OMAP3: Fix McBSP poll read and write for 32bit reg access
  • From: "Varadarajan, Charu Latha" <charu@xxxxxx>
• RE: [PATCH] twl4030: Initial support for twl5031
  • From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>