Linux for Texus Instruments OMAP Processors
[Prev Page][Next Page]
- RE: [PATCH] OMAP3: Fix McBSP poll read and write for 32bit reg access
- From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
- RE: [PATCH] OMAP3: Fix McBSP poll read and write for 32bit reg access
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- Re: [PATCH] OMAP3: Fix McBSP poll read and write for 32bit reg access
- From: vimal singh <vimal.newwork@xxxxxxxxx>
- RE: patch: add omap730 / omap850 rtc support
- From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
- Re: [PATCH] OMAP3 PM export chip IDCODE, Production ID and Die ID
- From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
- [PATCH] OMAP3: Fix McBSP poll read and write for 32bit reg access
- stable kernel version
- From: Janosch Machowinski <scotch@xxxxxx>
- [PATCH 2/2] ARM: OMAP3: IGEP-v2: Add defconfig
- From: Enric Balletbò i Serra <eballetbo@xxxxxxxxx>
- [PATCH 1/2] ARM: OMAP3: Add support for the IGEP v2 board (rev B)
- From: Enric Balletbò i Serra <eballetbo@xxxxxxxxx>
- Re: [PATCH] ARM: OMAP3: Add support for the IGEP v2 board (rev B)
- From: Enric Balletbò i Serra <eballetbo@xxxxxxxxx>
- Re: patch: add omap730 / omap850 rtc support
- From: Christopher Friedt <chrisfriedt@xxxxxxxxx>
- [PATCH] ARM: OMAP3: cm-t35: add EHCI support
- From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
- Re: [PATCH 1/2] ARM: OMAP3: add CompuLab CM-T35 module
- From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
- [PATCH 2/2] ARM: OMAP3: cm-t35: add defconfig
- From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
- [PATCH 1/2] ARM: OMAP3: add CompuLab CM-T35 module
- From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
- [PATCH 0/2 v2] ARM: OMAP3: add support for cm-t35 board
- From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
- RE: patch: add omap730 / omap850 rtc support
- From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
- Re: Broken cpuidle on PM branch?
- From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- [PATCH] ARM: OMAP: SDMA: Fix omap_stop_dma() API for channel linking
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- [PATCH] ARM: OMAP4: Fix UART4 platform data
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- [PATCH] ARM: OMAP4: Allow omap_serial_early_init() for OMAP4430 board
- From: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
- patches rebased on 2.6.32-rc4
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- Re: FEATURES prints
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- RE: FEATURES prints
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- Re: [RFC] OMAP1: Massive clean up of omap730/omap850 code
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 6/6] omap: McBSP: Fix incorrect receiver stop in omap_mcbsp_stop
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 5/6] omap: Initialization of SDRC params on Zoom2
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 4/6] omap: RX-51: Drop I2C-1 speed to 2200
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 3/6] omap: SDMA: Fixing bug in omap_dma_set_global_params()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/6] omap: CONFIG_ISP1301_OMAP redefined in Beagle defconfig
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/6] omap: Fix Unlikely(x) < y
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 0/6] omap fixes for v2.6.32-rc4
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [rtc-linux] Re: [PATCH v2] rtc: make rtc-omap driver ioremap its register space
- From: Alessandro Zummo <alessandro.zummo@xxxxxxxxxxxx>
- Re: [PATCH v2] rtc: make rtc-omap driver ioremap its register space
- From: "Mark A. Greer" <mgreer@xxxxxxxxxx>
- RE: [PATCH RESEND] I2C: OMAP: Add missing wakeup events
- From: "Sonasath, Moiz" <m-sonasath@xxxxxx>
- Re: [PATCH] OMAP3: SRF: Fix latency resource target value computations
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- RE: FEATURES prints
- From: "Premi, Sanjeev" <premi@xxxxxx>
- Re: FEATURES prints
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP3 PM restore observability settings after off mode
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- RE: Discussion: OMAP: PM: opp table handling
- From: "Premi, Sanjeev" <premi@xxxxxx>
- Re: [PATCHv1 1/3] OMAP UART: Adds omap-serial driver support.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Discussion: OMAP: PM: opp table handling
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- Re: [PATCH] OMAP3 PM export chip IDCODE, Production ID and Die ID
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP3 PM export chip IDCODE, Production ID and Die ID
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] OMAP3 PM Add sysfs entry for EFuse values
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 2/3] OMAP3: PM: Configure PRM setup times from board files
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/3] OMAP3: PM: Make PRM setup times and CPUidle latencies/threshold board specific
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP3 PM restore observability settings after off mode
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP35x: Add support for 720MHz part
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] omap: Fix 35xx detection (Re: [PATCH] [RFC] omap: 3630: default cpu_is_omap3630 to zero)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] omap-pm: Fixes behaviour of some shared resource framework functions
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP3 PM export chip IDCODE, Production ID and Die ID
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP3 PM Add sysfs entry for EFuse values
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] OMAP: DSS2: RFBI driver update
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] omap: Fix 35xx detection (Re: [PATCH] [RFC] omap: 3630: default cpu_is_omap3630 to zero)
- From: Nishanth Menon <nm@xxxxxx>
- [APPLIED] omap3: ehci: trivial fix of a debug print
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] rx51: add wl1251 wlan driver support
- From: Kalle Valo <kalle.valo@xxxxxx>
- [APPLIED] [PATCH] ARM: OMAP: McBSP: Fix incorrect receiver stop in
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH] ehci: fix port connect status programming
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2 1/2] arm: a driver for on-chip ETM and ETB
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH v2 1/2] arm: a driver for on-chip ETM and ETB
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- [PATCH] omap: Fix cpu_is_omap35xx default defines (Re: [PATCH] [RFC] omap: 3630: default cpu_is_omap3630 to zero)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] ARM: OMAP3: Add support for the IGEP v2 board (rev B)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] omap: Fix 35xx detection (Re: [PATCH] [RFC] omap: 3630: default cpu_is_omap3630 to zero)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] [RFC] omap: 3630: default cpu_is_omap3630 to zero
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] [RFC] omap: 3630: default cpu_is_omap3630 to zero
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v2 1/2] arm: a driver for on-chip ETM and ETB
- From: Alexander Shishkin <virtuoso@xxxxxxxxx>
- Re: [PATCH 1/2] ARM: OMAP3: add CompuLab CM-T35 module
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v2 2/2] OMAP3: add platform devices for ETM and ETB
- From: Alexander Shishkin <virtuoso@xxxxxxxxx>
- [PATCH] rx51: add wl1251 wlan driver support
- From: Kalle Valo <kalle.valo@xxxxxx>
- Re: Broken cpuidle on PM branch?
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 2/2] ARM: OMAP3: cm-t35: add defconfig
- From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
- [PATCH 0/2] ARM: OMAP3: add support for cm-t35 board
- From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
- [PATCH 1/2] ARM: OMAP3: add CompuLab CM-T35 module
- From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
- Re: [PATCH] OMAP35x: Add support for 720MHz part
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: adding new board
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- ARM: SMP: BUG with PREEMPT enabled
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- Re: [PATCH 1/1] OMAP3: PM: SmartReflex: Fix scheduled while atomic problem
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: adding new board
- From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
- Re: adding new board
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Broken cpuidle on PM branch?
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: Broken cpuidle on PM branch?
- From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- Re: DSS2 frame buffer problem
- From: Gary Thomas <gary@xxxxxxxxxxxx>
- Re: DSS2 frame buffer problem
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- DSS2 frame buffer problem
- From: Gary Thomas <gary@xxxxxxxxxxxx>
- [PATCH] ehci: fix port connect status programming
- From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
- patch: add omap730 / omap850 rtc support
- From: Christopher Friedt <chrisfriedt@xxxxxxxxx>
- [PATCH v2] ARM: OMAP3: Add support for the IGEP v2 board (rev B)
- From: Enric Balletbò i Serra <eballetbo@xxxxxxxxx>
- Re: [PATCH] ARM: OMAP3: Add support for the IGEP v2 board (rev B)
- From: Enric Balletbò i Serra <eballetbo@xxxxxxxxx>
- Re: [PATCH] [RFC] omap: 3630: default cpu_is_omap3630 to zero
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- RE: [PATCH] [RFC] omap: 3630: default cpu_is_omap3630 to zero
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- Re: [PATCH RESEND] I2C: OMAP: Add missing wakeup events
- From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
- Re: New project announcement: gst-dsp, with beagleboard demo image
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- Re: Memory performance / Cache problem
- [PATCH 1/1] OMAP3: PM: SmartReflex: Fix scheduled while atomic problem
- From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- Re: RE: Memory performance / Cache problem
- RE: [PATCH 1/1] OMAP: DSS2: RFBI driver update
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- Re: omap3: ehci: trivial fix of a debug print
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- Re: [PATCHv1 1/3] OMAP UART: Adds omap-serial driver support.
- From: kishore kadiyala <kishorek.kadiyala@xxxxxxxxx>
- adding new board
- From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
- Re: New project announcement: gst-dsp, with beagleboard demo image
- From: Gregoire Gentil <gregoire@xxxxxxxxxx>
- FW: [PATCH] omap-pm: Fixes behaviour of some shared resource framework functions
- From: "Dasgupta, Romit" <romit@xxxxxx>
- New project announcement: gst-dsp, with beagleboard demo image
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- Re: [ANNOUNCE] updated PM branch, based on 2.6.32-rc1
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH] [RFC] omap: 3630: default cpu_is_omap3630 to zero
- From: "Menon, Nishanth" <nm@xxxxxx>
- RE: [PATCH] [RFC] omap: 3630: default cpu_is_omap3630 to zero
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- RE: [PATCH] [RFC] omap: 3630: default cpu_is_omap3630 to zero
- From: "Menon, Nishanth" <nm@xxxxxx>
- Re: [ANNOUNCE] updated PM branch, based on 2.6.32-rc1
- From: Juha Kuikka <juha.kuikka@xxxxxxxxx>
- [PATCH] [RFC] omap: 3630: default cpu_is_omap3630 to zero
- From: Vikram Pandita <vikram.pandita@xxxxxx>
- Re: [ANNOUNCE] updated PM branch, based on 2.6.32-rc1
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Broken cpuidle on PM branch?
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
- RE: [PATCHv1 1/3] OMAP UART: Adds omap-serial driver support.
- From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
- Re: [ANNOUNCE] updated PM branch, based on 2.6.32-rc1
- From: Juha Kuikka <juha.kuikka@xxxxxxxxx>
- Re: [PATCHv2 0/1] Runtime detection of OMAP35x variants
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- omap3: ehci: trivial fix of a debug print
- From: Anand Gadiyar <gadiyar@xxxxxx>
- RE: [PATCH RESEND] I2C: OMAP: Add missing wakeup events
- From: "Sonasath, Moiz" <m-sonasath@xxxxxx>
- RE: [PATCH RESEND] I2C: OMAP: Add missing wakeup events
- From: "Sonasath, Moiz" <m-sonasath@xxxxxx>
- [APPLIED] [PATCH v5] OMAP3: introduce OMAP3630
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: [PATCH 1/1] OMAP: DSS2: RFBI driver update
- From: "Christensen, Mikkel" <mlc@xxxxxx>
- Re: [PATCH] OMAP3 PM export chip IDCODE, Production ID and Die ID
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- [PATCH] OMAP3 PM restore observability settings after off mode
- From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
- [PATCH] OMAP3 PM export chip IDCODE, Production ID and Die ID
- From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
- [PATCH] OMAP3 PM Add sysfs entry for EFuse values
- From: "Peter 'p2' De Schrijver" <peter.de-schrijver@xxxxxxxxx>
- RE: [PATCH 1/1] OMAP: DSS2: RFBI driver update
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- RE: [PATCH 1/1] OMAP: DSS2: RFBI driver update
- From: "Christensen, Mikkel" <mlc@xxxxxx>
- [PATCH 2/3] OMAP3: PM: Configure PRM setup times from board files
- From: Rajendra Nayak <rnayak@xxxxxx>
- [PATCH 3/3] OMAP3: PM: Configure CPUidle latencies/thresholds from board files
- From: Rajendra Nayak <rnayak@xxxxxx>
- [PATCH 1/3] OMAP3: PM: Fix the way OPP rate tables are initialized
- From: Rajendra Nayak <rnayak@xxxxxx>
- [PATCH 0/3] OMAP3: PM: Make PRM setup times and CPUidle latencies/threshold board specific
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- [PATCH] OMAP35x: Add support for 720MHz part
- From: Sanjeev Premi <premi@xxxxxx>
- Re: [PATCH 0/10] omap mailbox: Adding OMAP4 support v2
- From: Russell King <rmk@xxxxxxxxxxxxxxxx>
- [PATCH] OMAP3 : Fix McSPI RX Timeout
- Re: [alsa-devel] [PATCH 3/8] McBSP: OMAP3: Add Sidetone feature
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [alsa-devel] [PATCH 3/8] McBSP: OMAP3: Add Sidetone feature
- From: Eero Nurkkala <ext-eero.nurkkala@xxxxxxxxx>
- [PATCH RESEND] I2C: OMAP: Add missing wakeup events
- From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
- Re: [PATCH v3] OMAP4: sDMA driver: descriptor autoloading feature
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- RE: Memory performance / Cache problem
- From: "Dasgupta, Romit" <romit@xxxxxx>
- Re: [alsa-devel] [PATCH 3/8] McBSP: OMAP3: Add Sidetone feature
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [alsa-devel] [PATCH 3/8] McBSP: OMAP3: Add Sidetone feature
- From: Eero Nurkkala <ext-eero.nurkkala@xxxxxxxxx>
- Re: [PATCH 6/8] RX-51: Audio: Add usage of regulator framework to control VMMC2
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [alsa-devel] [PATCH 5/8] board-rx51-peripherals: split vaux3 and vmmc2 supplies
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- RE: Memory performance / Cache problem
- From: "Premi, Sanjeev" <premi@xxxxxx>
- Re: [alsa-devel] [PATCH 3/8] McBSP: OMAP3: Add Sidetone feature
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- RE: Memory performance / Cache problem
- From: "Dasgupta, Romit" <romit@xxxxxx>
- Re: [PATCH 6/8] RX-51: Audio: Add usage of regulator framework to control VMMC2
- From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- Re: [PATCH v1 1/2] arm: a driver for on-chip ETM and ETB
- From: Alexander Shishkin <virtuoso@xxxxxxxxx>
- RE: Memory performance / Cache problem
- Re: Memory performance / Cache problem
- From: Siarhei Siamashka <siarhei.siamashka@xxxxxxxxx>
- Re: [PATCH 1/1] OMAP: DSS2: RFBI driver update
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- Re: [alsa-devel] [PATCH 5/8] board-rx51-peripherals: split vaux3 and vmmc2 supplies
- From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- RE: Memory performance / Cache problem
- From: "Dasgupta, Romit" <romit@xxxxxx>
- [PATCH 1/1] omap iommu: fix wrong condition check for SUPERSECTION
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- Memory performance / Cache problem
- Re: [alsa-devel] [PATCH 3/8] McBSP: OMAP3: Add Sidetone feature
- From: Eero Nurkkala <ext-eero.nurkkala@xxxxxxxxx>
- RE: [PATCH v1 1/2] arm: a driver for on-chip ETM and ETB
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- Re: [PATCH v1 1/2] arm: a driver for on-chip ETM and ETB
- From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
- Re: [PATCH v1 2/2] OMAP3: add platform devices for ETM and ETB
- From: Linus Walleij <linus.ml.walleij@xxxxxxxxx>
- Re: [PATCH v1 1/2] arm: a driver for on-chip ETM and ETB
- From: Linus Walleij <linus.ml.walleij@xxxxxxxxx>
- RE: [PATCH v1 2/2] OMAP3: add platform devices for ETM and ETB
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Re: [PATCH 1/2] arm/omap3: a driver for on-chip ETM and ETB
- From: Alexander Shishkin <virtuoso@xxxxxxxxx>
- [PATCH v1 2/2] OMAP3: add platform devices for ETM and ETB
- From: Alexander Shishkin <virtuoso@xxxxxxxxx>
- [PATCH v1 1/2] arm: a driver for on-chip ETM and ETB
- From: Alexander Shishkin <virtuoso@xxxxxxxxx>
- [PATCH] ARM: OMAP: McBSP: Fix incorrect receiver stop in omap_mcbsp_stop
- From: Jarkko Nikula <jhnikula@xxxxxxxxx>
- RE: Patches merged to split OMAP2_IO_ADDRESS
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- RE: [PATCH 1/2] arm/omap3: a driver for on-chip ETM and ETB
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- Re: [GIT PULL] omap fixes for v2.6.32-rc3
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- Re: [PATCH] ARM: OMAP3: Add support for the IGEP v2 board (rev B)
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH v5] OMAP3: introduce OMAP3630
- From: Nishanth Menon <nm@xxxxxx>
- [APPLIED] [PATCH] [RFC] OMAP: eliminate OMAP_MAX_NR_PORTS
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH]ZOOM2: Initialization of SDRC params on Zoom2
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH v2] OMAP: RX-51: Drop I2C-1 speed to 2200
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- RE: [GIT PULL] omap fixes for v2.6.32-rc3
- From: "Madhusudhan" <madhu.cr@xxxxxx>
- [APPLIED] [PATCHv2 1/1] Runtime detection of OMAP35x devices
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv2 1/1] Runtime detection of OMAP35x devices
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [ANNOUNCE] updated PM branch, based on 2.6.32-rc1
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [ANNOUNCE] updated PM branch, based on 2.6.32-rc1
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [GIT PULL] omap fixes for v2.6.32-rc3
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH 2/2] OMAP3:PM:SR: SmartReflex Refactor Rev2.0
- From: Nishanth Menon <nm@xxxxxx>
- Re: [GIT PULL] omap fixes for v2.6.32-rc3
- From: Jiri Kosina <jkosina@xxxxxxx>
- Re: [RFC][PATCH 2/2] OMAP3:PM:SR: SmartReflex Refactor Rev2.0
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH v2] OMAP3:PM: introduce enabled flag to omap_opp
- From: Nishanth Menon <nm@xxxxxx>
- Re: [GIT PULL] omap fixes for v2.6.32-rc3
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP3:PM: introduce enabled flag to omap_opp
- From: Nishanth Menon <nm@xxxxxx>
- RE: [PATCH] OMAP3:PM: introduce enabled flag to omap_opp
- From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
- RE: [PATCH] OMAP3:PM: introduce enabled flag to omap_opp
- From: "Madhusudhan" <madhu.cr@xxxxxx>
- [PATCH 1/1] OMAP: DSS2: RFBI driver update
- From: Mikkel Christensen <mlc@xxxxxx>
- [PATCH] OMAP3:PM: introduce enabled flag to omap_opp
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCHv2 1/1] Runtime detection of OMAP35x devices
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- [PATCHv2 1/1] Runtime detection of OMAP35x devices
- From: Sanjeev Premi <premi@xxxxxx>
- [PATCHv2 0/1] Runtime detection of OMAP35x variants
- From: Sanjeev Premi <premi@xxxxxx>
- Re: [PATCH 1/2] arm/omap3: a driver for on-chip ETM and ETB
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [GIT PULL] omap fixes for v2.6.32-rc3
- From: Greg KH <gregkh@xxxxxxx>
- Re: [PATCH] OMAP3 : Fix McSPI RX Timeout
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4] OMAP3: introduce OMAP3630
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4] OMAP3: introduce OMAP3630
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH v3] OMAP3: introduce OMAP3630
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4] OMAP3: introduce OMAP3630
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v4] OMAP3: introduce OMAP3630
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH v4] OMAP3: introduce OMAP3630
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: How to add suport for new ARM board IGEP0020
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v3] OMAP3: introduce OMAP3630
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv1 1/3] OMAP UART: Adds omap-serial driver support.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [GIT PULL] omap fixes for v2.6.32-rc3
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- Re: [ANNOUNCE] updated PM branch, based on 2.6.32-rc1
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH v2] OMAP: RX-51: Drop I2C-1 speed to 2200
- From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
- Re: [PATCH] [RFC] OMAP: eliminate OMAP_MAX_NR_PORTS
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH]ZOOM2: Initialization of SDRC params on Zoom2
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] twl4030: Fix boot with twl4030 usb transceiver enabled
- From: Samuel Ortiz <sameo@xxxxxxxxxxxxxxx>
- [PATCH] ARM: OMAP3: Add support for the IGEP v2 board (rev B)
- From: Enric Balletbò i Serra <eballetbo@xxxxxxxxx>
- RE: [PATCH v4] OMAP3: introduce OMAP3630
- From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
- Re: [PATCH v2] twl4030: Fix boot with twl4030 usb transceiver enabled
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- [PATCH v4] OMAP3: introduce OMAP3630
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCHv2 1/1] OMAP3: PM: Functions to get freq from opp and vice-versa
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: How to add suport for new ARM board IGEP0020
- From: Nishanth Menon <nm@xxxxxx>
- How to add suport for new ARM board IGEP0020
- From: Enric Balletbò i Serra <eballetbo@xxxxxxxxx>
- RE: FEATURES prints
- From: "Premi, Sanjeev" <premi@xxxxxx>
- Re: [GIT PULL] omap fixes for v2.6.32-rc3
- From: Greg KH <gregkh@xxxxxxx>
- Re: [PATCH] OMAP3: PM: Do not allow OPP1 for VDD2
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- RE: [RFC][PATCH] OMAP3: introduce OMAP3630
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- Re: [PATCH] OMAP: RX-51: Drop I2C-1 speed to 2200
- From: Nishanth Menon <nm@xxxxxx>
- Re: FEATURES prints
- From: Nishanth Menon <nm@xxxxxx>
- Re: [RFC][PATCH] OMAP3: introduce OMAP3630
- From: Nishanth Menon <nm@xxxxxx>
- RE: [PATCH v3] OMAP3: introduce OMAP3630
- From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
- Re: [PATCH v2] twl4030: Fix boot with twl4030 usb transceiver enabled
- From: Roger Quadros <quadros.roger@xxxxxxxxx>
- Re: [alsa-devel] [PATCH 2/8] ASoC: OMAP: RX-51 Machine driver and AIC34b_dummy driver
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [GIT PULL] omap fixes for v2.6.32-rc3
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- [PATCH] OMAP: RX-51: Drop I2C-1 speed to 2200
- From: Aaro Koskinen <aaro.koskinen@xxxxxxxxx>
- Re: [alsa-devel] [PATCH 5/8] board-rx51-peripherals: split vaux3 and vmmc2 supplies
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- RE: FEATURES prints
- From: "Premi, Sanjeev" <premi@xxxxxx>
- Re: [alsa-devel] [PATCH 3/8] McBSP: OMAP3: Add Sidetone feature
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [alsa-devel] [PATCH 1/8] ASoC: TPA6130A2 amplifier driver
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 7/8] ASoC: tlv320aic3x: add initial usage of regulator framework to control avdd_dac
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [GIT PULL] omap fixes for v2.6.32-rc3
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [GIT PULL] omap fixes for v2.6.32-rc3
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- Re: [GIT PULL] omap fixes for v2.6.32-rc3
- From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
- Re: [PATCH 1/8] ASoC: TPA6130A2 amplifier driver
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
- Re: [PATCH 5/8] board-rx51-peripherals: split vaux3 and vmmc2 supplies
- From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- Re: [PATCH 2/8] ASoC: OMAP: RX-51 Machine driver and AIC34b_dummy driver
- From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- [PATCH] OMAP3: PM: Do not allow OPP1 for VDD2
- From: "Reddy, Teerth" <teerth@xxxxxx>
- Re: [PATCH 2/8] ASoC: OMAP: RX-51 Machine driver and AIC34b_dummy driver
- From: Jarkko Nikula <jhnikula@xxxxxxxxx>
- RE: Patches merged to split OMAP2_IO_ADDRESS
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- Re: [PATCH 3/8] McBSP: OMAP3: Add Sidetone feature
- From: Eero Nurkkala <ext-eero.nurkkala@xxxxxxxxx>
- RE: [PATCH 1/1] OMAP: I2C: Add mpu wake up latency constraint in i2c
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- Re: [PATCH 7/8] ASoC: tlv320aic3x: add initial usage of regulator framework to control avdd_dac
- From: Eero Nurkkala <ext-eero.nurkkala@xxxxxxxxx>
- RE: [RFC][PATCH] OMAP3: introduce OMAP3630
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- Re: [ANNOUNCE] updated PM branch, based on 2.6.32-rc1
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- Re: Question on OPP table handling
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH v3] OMAP3: introduce OMAP3630
- From: Nishanth Menon <nm@xxxxxx>
- Re: Query: EHCI clock management approach
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [GIT PULL] omap fixes for v2.6.32-rc3
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Patches merged to split OMAP2_IO_ADDRESS
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH] omap_hsmmc: Add missing probe handler hook
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [ANNOUNCE] updated PM branch, based on 2.6.32-rc1
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [GIT PULL] omap fixes for v2.6.32-rc3
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- Re: [GIT PULL] omap fixes for v2.6.32-rc3
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- Re: [ANNOUNCE] updated PM branch, based on 2.6.32-rc1
- From: Juha Kuikka <juha.kuikka@xxxxxxxxx>
- Re: [GIT PULL] omap fixes for v2.6.32-rc3
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [GIT PULL] omap fixes for v2.6.32-rc3
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- RE: [PATCH v2] OMAP3: introduce OMAP3630
- From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
- RE: [PATCH v2] OMAP3: introduce OMAP3630
- From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
- FEATURES prints
- From: Nishanth Menon <nm@xxxxxx>
- Re: Patches merged to split OMAP2_IO_ADDRESS
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH v2] OMAP3: introduce OMAP3630
- From: Nishanth Menon <nm@xxxxxx>
- Re: mux strategy (was RE: [PATCH] [OMAP1] mux: Add MMC mux pins for omap7xx)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: X-loader / U-Boot query
- From: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
- RE: X-loader / U-Boot query
- From: "Syed Mohammed, Khasim" <khasim@xxxxxx>
- Re: X-loader / U-Boot query
- From: Gary Thomas <gary@xxxxxxxxxxxx>
- RE: [RFC][PATCH] OMAP3: introduce OMAP3630
- From: "Menon, Nishanth" <nm@xxxxxx>
- Re: [PATCH 7/8] ASoC: tlv320aic3x: add initial usage of regulator framework to control avdd_dac
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- RE: X-loader / U-Boot query
- From: "Syed Mohammed, Khasim" <khasim@xxxxxx>
- RE: [PATCH 7/8] ASoC: tlv320aic3x: add initial usage of regulator framework to control avdd_dac
- From: <ext-Eero.Nurkkala@xxxxxxxxx>
- RE: X-loader / U-Boot query
- From: "Menon, Nishanth" <nm@xxxxxx>
- Re: X-loader / U-Boot query
- From: Gary Thomas <gary@xxxxxxxxxxxx>
- RE: X-loader / U-Boot query
- From: "Menon, Nishanth" <nm@xxxxxx>
- RE: [RFC][PATCH] OMAP3: introduce OMAP3630
- From: "Menon, Nishanth" <nm@xxxxxx>
- RE: [PATCH] OMAP3: PM: Fix VDD2 OPP1 issue
- From: "Menon, Nishanth" <nm@xxxxxx>
- Re: X-loader / U-Boot query
- From: Adam Machalek <adam.machalek@xxxxxxxxxxxxxxx>
- RE: [RFC][PATCH] OMAP3: introduce OMAP3630
- From: "Pais, Allen" <allen.pais@xxxxxx>
- Re: [PATCH] OMAP3: PM: Fix VDD2 OPP1 issue
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: X-loader / U-Boot query
- From: Gary Thomas <gary@xxxxxxxxxxxx>
- Re: [PATCH 8/8] ASoC: tpa6130a2: Control vdd using regulator framework
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH] OMAP3: introduce OMAP3630
- From: Nishanth Menon <nm@xxxxxx>
- RE: [RFC][PATCH] OMAP3: introduce OMAP3630
- From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
- RE: [RFC][PATCH] OMAP3: introduce OMAP3630
- From: "Premi, Sanjeev" <premi@xxxxxx>
- Re: [PATCH] OMAP3: PM: Fix VDD2 OPP1 issue
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 8/8] ASoC: tpa6130a2: Control vdd using regulator framework
- From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- Re: [PATCH 1/8] ASoC: TPA6130A2 amplifier driver
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: X-loader / U-Boot query
- From: shankarGanesh <shankarganeshk@xxxxxxxxx>
- Re: [PATCH] OMAP3: PM: Fix VDD2 OPP1 issue
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 8/8] ASoC: tpa6130a2: Control vdd using regulator framework
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 7/8] ASoC: tlv320aic3x: add initial usage of regulator framework to control avdd_dac
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/8] ASoC: TPA6130A2 amplifier driver
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
- Re: [PATCH 7/8] ASoC: tlv320aic3x: add initial usage of regulator framework to control avdd_dac
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- RE: [RFC][PATCH] OMAP3: introduce OMAP3630
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- Re: [PATCH 3/8] McBSP: OMAP3: Add Sidetone feature
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 6/8] RX-51: Audio: Add usage of regulator framework to control VMMC2
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 3/8] McBSP: OMAP3: Add Sidetone feature
- From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- Re: [PATCH 5/8] board-rx51-peripherals: split vaux3 and vmmc2 supplies
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/8] ASoC: OMAP: RX-51 Machine driver and AIC34b_dummy driver
- From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- Re: [PATCH 7/8] ASoC: tlv320aic3x: add initial usage of regulator framework to control avdd_dac
- From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- Re: [PATCH 3/8] McBSP: OMAP3: Add Sidetone feature
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 2/8] ASoC: OMAP: RX-51 Machine driver and AIC34b_dummy driver
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/8] ASoC: TPA6130A2 amplifier driver
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
- X-loader / U-Boot query
- From: Gary Thomas <gary@xxxxxxxxxxxx>
- Re: [PATCH 1/8] ASoC: TPA6130A2 amplifier driver
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH 1/2] arm: a driver for on-chip ETM and ETB
- From: Alexander Shishkin <virtuoso@xxxxxxxxx>
- [PATCH 2/2] OMAP3: add platform devices for ETM and ETB
- From: Alexander Shishkin <virtuoso@xxxxxxxxx>
- omap850 & omap730 rtc
- From: Christopher Friedt <chrisfriedt@xxxxxxxxx>
- Re: [PATCH 2/8] ASoC: OMAP: RX-51 Machine driver and AIC34b_dummy driver
- From: Eero Nurkkala <ext-eero.nurkkala@xxxxxxxxx>
- Re: [PATCH 1/8] ASoC: TPA6130A2 amplifier driver
- From: Eero Nurkkala <ext-eero.nurkkala@xxxxxxxxx>
- Re: [PATCH 7/8] ASoC: tlv320aic3x: add initial usage of regulator framework to control avdd_dac
- From: Eero Nurkkala <ext-eero.nurkkala@xxxxxxxxx>
- [PATCH 3/8] McBSP: OMAP3: Add Sidetone feature
- From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- [PATCH 8/8] ASoC: tpa6130a2: Control vdd using regulator framework
- From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- [PATCH 2/8] ASoC: OMAP: RX-51 Machine driver and AIC34b_dummy driver
- From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- [PATCH 6/8] RX-51: Audio: Add usage of regulator framework to control VMMC2
- From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- [PATCH 4/8] OMAP: RX51: Add audio board file
- From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- [PATCH 7/8] ASoC: tlv320aic3x: add initial usage of regulator framework to control avdd_dac
- From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- [PATCH 5/8] board-rx51-peripherals: split vaux3 and vmmc2 supplies
- From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- [PATCH 1/8] ASoC: TPA6130A2 amplifier driver
- From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- [PATCH 0/8] RX-51 audio drivers
- From: Eduardo Valentin <eduardo.valentin@xxxxxxxxx>
- RE: Patches merged to split OMAP2_IO_ADDRESS
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- RE: [RFC][PATCH] OMAP3: introduce OMAP3630
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- [PATCH] [RFC] OMAP: eliminate OMAP_MAX_NR_PORTS
- [PATCH] OMAP3: PM: Fix VDD2 OPP1 issue
- From: "Reddy, Teerth" <teerth@xxxxxx>
- [PATCH]ZOOM2: Initialization of SDRC params on Zoom2
- From: "Reddy, Teerth" <teerth@xxxxxx>
- RE: [PATCHv1 1/3] OMAP UART: Adds omap-serial driver support.
- From: "G, Manjunath Kondaiah" <manjugk@xxxxxx>
- Re: mux strategy (was RE: [PATCH] [OMAP1] mux: Add MMC mux pins for omap7xx)
- From: Mike Rapoport <mike@xxxxxxxxxxxxxx>
- Re: [RFC][PATCH] OMAP3: introduce OMAP3630
- From: Felipe Balbi <felipe.balbi@xxxxxxxxx>
- Re: [PATCHv1 1/3] OMAP UART: Adds omap-serial driver support.
- From: Govindraj <govindraj.ti@xxxxxxxxx>
- Re: [PATCHv1 1/3] OMAP UART: Adds omap-serial driver support.
- From: Govindraj <govindraj.ti@xxxxxxxxx>
- [RFC][PATCH] OMAP3: introduce OMAP3630
- From: Nishanth Menon <nm@xxxxxx>
- Re: mux strategy (was RE: [PATCH] [OMAP1] mux: Add MMC mux pins for omap7xx)
- From: Philip Balister <philip@xxxxxxxxxxxx>
- RE: [alsa-devel] [PATCHv3 1/7] OMAP4: PMIC: Add support for twl6030 codec
- From: "Lopez Cruz, Misael" <x0052729@xxxxxx>
- Query: EHCI clock management approach
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- [PATCH] omap: Use getnstimeofday for omap_device
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH] omap: Use ioremap for omap_hwmod instead of OMAP2_IO_ADDRESS
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Patches merged to split OMAP2_IO_ADDRESS
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH 5/5] ARM: OMAP2/3/4: Add OMAP4 L3 and L4 peripherals.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH 4/5] ARM: OMAP2/3/4: Fix DEBUG_LL UART io address
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH 3/5] ARM: OMAP2/3/4: Move SRAM map to claim more io space
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/2] arm/omap3: a driver for on-chip ETM and ETB
- [APPLIED] [PATCH v2] SDMA: Fixing bug in omap_dma_set_global_params()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH] Beagle: CONFIG_ISP1301_OMAP redefined in defconfig
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] SDMA: Fixing bug in omap_dma_set_global_params()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH] OMAP: Fix Unlikely(x) < y
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv1 1/3] OMAP UART: Adds omap-serial driver support.
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [OMAP3] ALSA driver 'suspend/resume' handlers
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCHv3 1/1] Runtime detection of Si features
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Timeout after setting SD/MMC clock, bus width on 3530
- From: John Faith <jfaith7@xxxxxxxxx>
- Re: mux strategy (was RE: [PATCH] [OMAP1] mux: Add MMC mux pins for omap7xx)
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- RE: [PATCH 1/1] OMAP: I2C: Add mpu wake up latency constraint in i2c
- From: "Woodruff, Richard" <r-woodruff2@xxxxxx>
- [GIT PULL] omap fixes for v2.6.32-rc3
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: mux strategy (was RE: [PATCH] [OMAP1] mux: Add MMC mux pins for omap7xx)
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: Linux omap blocked on boot
- From: "Alberto J. Perez" <aperez@xxxxxxxxxxxx>
- RE: Linux omap blocked on boot
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Re: [RFC] OMAP1: Massive clean up of omap730/omap850 code
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Timeout after setting SD/MMC clock, bus width on 3530
- From: John Rigby <jcrigby@xxxxxxxxx>
- RE: Linux omap blocked on boot
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Re: mux strategy (was RE: [PATCH] [OMAP1] mux: Add MMC mux pins for omap7xx)
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: Linux omap blocked on boot
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: OMAP850 RTC and MMC registers differ from other OMAP1, how to implement?
- From: Christopher Friedt <chrisfriedt@xxxxxxxxx>
- omap7xx rtc ?
- From: Christopher Friedt <chrisfriedt@xxxxxxxxx>
- Linux omap blocked on boot
- From: "Alberto J. Perez" <aperez@xxxxxxxxxxxx>
- Re: [PATCH v2] SDMA: Fixing bug in omap_dma_set_global_params()
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
- RE: [PATCH 1/1] OMAP: I2C: Add mpu wake up latency constraint in i2c
- From: "Sonasath, Moiz" <m-sonasath@xxxxxx>
- Re: [PATCHv1 1/3] OMAP UART: Adds omap-serial driver support.
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH]ZOOM2: Initialization of SDRC params on Zoom2
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP3: PM: Update omap3_pm_defconfig
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH]PM: Initialization of SDRC params for DVFS on Zoom2
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH] omap-pm: Fixes behaviour of some shared resource framework functions
- From: "Dasgupta, Romit" <romit@xxxxxx>
- RE: [PATCH] OMAP3: PM: Update omap3_pm_defconfig
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- RE: [PATCH] OMAP3: PM: Update omap3_pm_defconfig
- From: "Gadiyar, Anand" <gadiyar@xxxxxx>
- Re: [PATCH 1/1] OMAP: I2C: Add mpu wake up latency constraint in i2c
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- [PATCH V3] OMAP: I2C: Add mpu wake up latency constraint in i2c
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- RE: [PATCH 1/1] OMAP: I2C: Add mpu wake up latency constraint in i2c
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- RE: [alsa-devel] [PATCHv3 1/7] OMAP4: PMIC: Add support for twl6030 codec
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- Re: [alsa-devel] [PATCHv3 1/7] OMAP4: PMIC: Add support for twl6030 codec
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] SDMA: Fixing bug in omap_dma_set_global_params()
- From: Venkatraman S <svenkatr@xxxxxx>
- [PATCH]ZOOM2: Initialization of SDRC params on Zoom2
- From: "Reddy, Teerth" <teerth@xxxxxx>
- [PATCH]PM: Initialization of SDRC params for DVFS on Zoom2
- From: "Reddy, Teerth" <teerth@xxxxxx>
- Re: [PATCH 00/19] OMAP: DSS2: Intro
- From: Felipe Contreras <felipe.contreras@xxxxxxxxx>
- Re: [alsa-devel] [PATCHv3 1/7] OMAP4: PMIC: Add support for twl6030 codec
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
- Re: [alsa-devel] [PATCHv3 1/7] OMAP4: PMIC: Add support for twl6030 codec
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
- [PATCH] OMAP3: PM: Update omap3_pm_defconfig
- From: Rajendra Nayak <rnayak@xxxxxx>
- RE: [alsa-devel] [PATCHv3 1/7] OMAP4: PMIC: Add support for twl6030 codec
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- RE: [alsa-devel] [PATCHv3 1/7] OMAP4: PMIC: Add support for twl6030 codec
- From: "Krishnamoorthy, Balaji T" <balajitk@xxxxxx>
- RFC: omap3630 board definitions
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- Re: [ANNOUNCE] updated PM branch, based on 2.6.32-rc1
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: mux strategy (was RE: [PATCH] [OMAP1] mux: Add MMC mux pins for omap7xx)
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- mux strategy (was RE: [PATCH] [OMAP1] mux: Add MMC mux pins for omap7xx)
- From: "Menon, Nishanth" <nm@xxxxxx>
- Timeout after setting SD/MMC clock, bus width on 3530
- From: John Faith <jfaith7@xxxxxxxxx>
- Re: [PATCH] [OMAP1] mux: Add MMC mux pins for omap7xx
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] CPUidle: always return with interrupts enabled
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] CPUidle: always return with interrupts enabled
- From: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] [OMAP1] mux: Add MMC mux pins for omap7xx
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- Re: [PATCH] [OMAP1] mux: Add MMC mux pins for omap7xx
- From: Nishanth Menon <nm@xxxxxx>
- RE: [alsa-devel] [PATCHv3 1/7] OMAP4: PMIC: Add support for twl6030 codec
- From: "Lopez Cruz, Misael" <x0052729@xxxxxx>
- Re: [alsa-devel] [PATCHv3 1/7] OMAP4: PMIC: Add support for twl6030 codec
- From: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP3: PM: Fix for Silicon bug on Context Restore on OMAP3430
- From: Nishanth Menon <nm@xxxxxx>
- RE: [PATCH] OMAP3: PM: Fix for Silicon bug on Context Restore on OMAP3430
- From: "Gopinath, Thara" <thara@xxxxxx>
- Re: [PATCH 2/8] omap: Lock DPLL5 at boot
- From: Paul Walmsley <paul@xxxxxxxxx>
- Re: [PATCH] OMAP3: PM: Fix for Silicon bug on Context Restore on OMAP3430
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH] OMAP3: PM: Fix for Silicon bug on Context Restore on OMAP3430
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH] OMAP3: PM: Fix for Silicon bug on Context Restore on OMAP3430
- From: "Gopinath, Thara" <thara@xxxxxx>
- Re: [PATCH] OMAP3: PM: Fix for Silicon bug on Context Restore on OMAP3430
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH] OMAP3: PM: Fix for Silicon bug on Context Restore on OMAP3430
- From: "Gopinath, Thara" <thara@xxxxxx>
- Re: [PATCH] OMAP3: PM: Fix for Silicon bug on Context Restore on OMAP3430
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH] [OMAP] mmc: Add mux configuration for omap7xx
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- [PATCH] [OMAP1] mux: Add MMC mux pins for omap7xx
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- Re: [PATCH]PM: Initialization of SDRC params for DVFS on Zoom2
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH] OMAP3: PM: Fix for Silicon bug on Context Restore on OMAP3430
- From: "Gopinath, Thara" <thara@xxxxxx>
- Re: Question on OPP table handling
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH] OMAP3: DVFS: No sdrc AC timing changes during core dvfs
- From: Rajendra Nayak <rnayak@xxxxxx>
- [PATCH] OMAP3: SRF: Fix latency resource target value computations
- From: Rajendra Nayak <rnayak@xxxxxx>
- Re: [PATCH]PM: Initialization of SDRC params for DVFS on Zoom2
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP3: PM: Fix for Silicon bug on Context Restore on OMAP3430
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH] OMAP: Fix Unlikely(x) < y
- From: Roel Kluin <roel.kluin@xxxxxxxxx>
- RE: Question on OPP table handling
- From: "Cousson, Benoit" <b-cousson@xxxxxx>
- RE: Question on OPP table handling
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- RE: Question on OPP table handling
- From: "Dasgupta, Romit" <romit@xxxxxx>
- RE: Question on OPP table handling
- From: "Dasgupta, Romit" <romit@xxxxxx>
- RE: Question on OPP table handling
- From: "Cousson, Benoit" <b-cousson@xxxxxx>
- Re: Question on OPP table handling
- From: Nishanth Menon <nm@xxxxxx>
- RE: Question on OPP table handling
- From: "Dasgupta, Romit" <romit@xxxxxx>
- Re: [PATCH] OMAP3: PM: Fix for Silicon bug on Context Restore on OMAP3430
- From: Nishanth Menon <nm@xxxxxx>
- Re: Question on OPP table handling
- From: Nishanth Menon <nm@xxxxxx>
- RE: [PATCH]PM: Initialization of SDRC params for DVFS on Zoom2
- From: "Reddy, Teerth" <teerth@xxxxxx>
- RE: [PATCHv3 0/1] Runtime detection of Si features
- From: "Premi, Sanjeev" <premi@xxxxxx>
- RE: Question on OPP table handling
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- RE: Question on OPP table handling
- From: "Premi, Sanjeev" <premi@xxxxxx>
- Re: [alsa-devel] [PATCHv3 1/7] OMAP4: PMIC: Add support for twl6030 codec
- From: Peter Ujfalusi <peter.ujfalusi@xxxxxxxxx>
- RE: Question on OPP table handling
- From: "Premi, Sanjeev" <premi@xxxxxx>
- RE: Question on OPP table handling
- From: "Cousson, Benoit" <b-cousson@xxxxxx>
- RE: Question on OPP table handling
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- [PATCHv3 7/7] ASoC: TWL6030: Detect power-up sequence completion
- From: "Lopez Cruz, Misael" <x0052729@xxxxxx>
- [PATCHv3 6/7] ASoC: TWL6030: Enable audio interrupt
- From: "Lopez Cruz, Misael" <x0052729@xxxxxx>
- [PATCHv3 5/7] ASoC: TWL6030: Add restrictions for low-power playback mode
- From: "Lopez Cruz, Misael" <x0052729@xxxxxx>
- [PATCHv3 4/7] ASoC: TWL6030: Add support for low-power PLL
- From: "Lopez Cruz, Misael" <x0052729@xxxxxx>
- [PATCHv3 3/7] ASoC: TWL6030: Manual power-up/down sequences
- From: "Lopez Cruz, Misael" <x0052729@xxxxxx>
- [PATCHv3 2/7] ASoC: TWL6030: Add twl6030 codec driver
- From: "Lopez Cruz, Misael" <x0052729@xxxxxx>
- [PATCHv3 1/7] OMAP4: PMIC: Add support for twl6030 codec
- From: "Lopez Cruz, Misael" <x0052729@xxxxxx>
- [PATCHv3 0/7] TWL6030 audio codec initial support
- From: "Lopez Cruz, Misael" <x0052729@xxxxxx>
- RE: [PATCH] OMAP3: PM: Fix for Silicon bug on Context Restore on OMAP3430
- From: "Gopinath, Thara" <thara@xxxxxx>
- [PATCH] OMAP3 : Fix McSPI RX Timeout
- RE: [PATCH 1/2] OMAP3: PM: Configure PRM setup times from board files
- From: "Nayak, Rajendra" <rnayak@xxxxxx>
- Re: [PATCH] input: fix rx51 board keymap
- From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
- Re: ISP OMAP3 camera support ov7690
- From: michael <michael@xxxxxxxxxxxxxxxxxxxxxxx>
- RE: ISP OMAP3 camera support ov7690
- From: "Aguirre Rodriguez, Sergio Alberto" <saaguirre@xxxxxx>
- Re: [PATCH 01/28] OMAP3: PM: GPMC context save/restore
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 02/28] OMAP3: PM: GPIO context save/restore
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 01/28] OMAP3: PM: GPMC context save/restore
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/5] OMAP PM fixes for 2.6.32
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 02/28] OMAP3: PM: GPIO context save/restore
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 01/28] OMAP3: PM: GPMC context save/restore
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 0/5] OMAP PM fixes for 2.6.32
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 02/28] OMAP3: PM: GPIO context save/restore
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 01/28] OMAP3: PM: GPMC context save/restore
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 01/28] OMAP3: PM: GPMC context save/restore
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP3: PM: Fix for Silicon bug on Context Restore on OMAP3430
- From: Nishanth Menon <nm@xxxxxx>
- Re: Question on OPP table handling
- From: Nishanth Menon <nm@xxxxxx>
- Re: [PATCH 01/28] OMAP3: PM: GPMC context save/restore
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- RE: [PATCH 1/1] OMAP: I2C: Add mpu wake up latency constraint in i2c
- From: "Pandita, Vikram" <vikram.pandita@xxxxxx>
- Re: [PATCH] OMAP3: PM: Fix for Silicon bug on Context Restore on OMAP3430
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: Question on OPP table handling
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 1/1] OMAP3: Common mechanism to identify cpu revision
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH v2] SDMA: Fixing bug in omap_dma_set_global_params()
- From: Randy Dunlap <rdunlap@xxxxxxxxxxxx>
- Re: [PATCH] OMAP3: PM: introduce a new powerdomain walk helper
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH] Beagle: CONFIG_ISP1301_OMAP redefined in defconfig
- From: Sanjeev Premi <premi@xxxxxx>
- RE: [PATCH 1/1] OMAP3: Common mechanism to identify cpu revision
- From: "Premi, Sanjeev" <premi@xxxxxx>
- [PATCH 4/4] [OMAP1] Make ARCH_OMAP850 select ARCH_OMAP_OTG
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- [PATCH 3/4] [OMAP] omap_udc: Add clocking and disable vbus sense for omap7xx
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- [PATCH 2/4] [OMAP] omap_udc: Updates for omap7xx IRQs and config
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- [PATCH 1/4] [OMAP] Clocks: Add omap7xx-specific USB clock configuration
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- [PATCH 0/4] omap_udc fixes for omap7xx
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- RE: [PATCH 1/1] OMAP3: Common mechanism to identify cpu revision
- From: "Premi, Sanjeev" <premi@xxxxxx>
- RE: Question on OPP table handling
- From: "Premi, Sanjeev" <premi@xxxxxx>
- RE: [PATCH] OMAP3: PM: Fix for Silicon bug on Context Restore on OMAP3430
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- Re: [PATCH] OMAP3: RX51: support sleep indicator LEDs
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- [PATCH] OMAP3: PM: Fix for Silicon bug on Context Restore on OMAP3430
- Re: [PATCH] OMAP3: PM: introduce a new powerdomain walk helper
- From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
- Re: [PATCH] OMAP3: RX51: support sleep indicator LEDs
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- [PATCH v2] SDMA: Fixing bug in omap_dma_set_global_params()
- From: Anuj Aggarwal <anuj.aggarwal@xxxxxx>
- Re: ISP OMAP3 camera support ov7690
- From: michael <michael@xxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH 1/3] [OMAP] htcherald: Add board support and LCD for HTC Herald
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- Re: [PATCH 1/3] [OMAP] htcherald: Add board support and LCD for HTC Herald
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- [PATCH 1/3] [OMAP] htcherald: Add board support and LCD for HTC Herald
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- Re: [PATCH 1/3] [OMAP] htcherald: Add board support and LCD for HTC Herald
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- [PATCH 1/3] [OMAP] htcherald: Add board support and LCD for HTC Herald
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- Re: [PATCH 1/3] [OMAP] htcherald: Add board support and LCD for HTC Herald
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- Re: ISP OMAP3 camera support ov7690
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- Re: [OMAP3] ALSA driver 'suspend/resume' handlers
- From: Jarkko Nikula <jhnikula@xxxxxxxxx>
- [PATCH 3/3] [OMAP] htcherald: Add default kernel configuration for Herald
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- [PATCH 2/3] [OMAP] htcherald: Modify Makefiles and Kconfig for HTC Herald
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- [PATCH 1/3] [OMAP] htcherald: Add board support and LCD for HTC Herald
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- [PATCH 0/3] htcherald: Add board support for HTC Herald
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- ISP OMAP3 camera support ov7690
- From: michael <michael@xxxxxxxxxxxxxxxxxxxxxxx>
- [PATCH] [OMAP7XX] Add missing clocks for MMC
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- [PATCH] [mmc-omap] Add support for 16-bit and 32-bit registers
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- Re: [PATCH] [OMAP1] htcherald: Add board support and LCD config for HTC Herald
- From: michael <michael@xxxxxxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] [OMAP1] htcherald: Add board support and LCD config for HTC Herald
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- Re: [PATCH] [OMAP1] htcherald: Add board support and LCD config for HTC Herald
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- [PATCH] [OMAP1] htcherald: Add board support and LCD config for HTC Herald
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- Re: [PATCH 6/8] omapfb: Condition mutex acquisition
- From: Cory Maccarrone <darkstar6262@xxxxxxxxx>
- Question on OPP table handling
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- Re: [PATCH 01/28] OMAP3: PM: GPMC context save/restore
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- Re: [PATCH 02/28] OMAP3: PM: GPIO context save/restore
- From: Nishanth Menon <menon.nishanth@xxxxxxxxx>
- [PATCH 8/8] omapfb: Blizzard: constify register address tables
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 7/8] omapfb: Blizzard: fix pointer to be const
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 6/8] omapfb: Condition mutex acquisition
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 5/8] omap: iovmm: Add missing mutex_unlock
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 4/8] omap: iovmm: Fix incorrect spelling
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCHv1 1/3] OMAP UART: Adds omap-serial driver support.
- From: Jonathan McDowell <noodles@xxxxxxxx>
- [PATCH 3/8] omap: SRAM: flush the right address after memcpy in omap_sram_push
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 2/8] omap: Lock DPLL5 at boot
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 1/8] omap: Fix incorrect 730 vs 850 detection
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [PATCH 0/8] Omap fixes for 2.6.32-rc2
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [OMAP3] ALSA driver 'suspend/resume' handlers
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- [APPLIED] [PATCH] omapfb: Blizzard: constify register address tables
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH] omapfb: Blizzard: fix pointer to be const
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH] arm: omap: iovmm: add missing mutex_unlock
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH] SDMA: Fixing bug in omap_dma_set_global_params()
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Re: [PATCH v2] omap_hsmmc: Add missing probe handler hook
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- [APPLIED] [PATCH 2/2] omap iovmm: fix incorrect spelling
- From: Tony Lindgren <tony@xxxxxxxxxxx>
- Get smashing love power
- From: "Mima Adkins" <kevindorney@xxxxxxxxxxxxxxxxx>
- Re: Any one is still using omap-kernel on N810???
- From: green <greenfreedom10@xxxxxxxxx>
- [PATCH 5/5] OMAP3: PM: Enable GPIO module-level wakeups
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 4/5] OMAP3: PM: USBHOST: clear wakeup events on both hosts
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 3/5] OMAP3: PM: PRCM interrupt: only handle selected PRCM interrupts
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 2/5] OMAP3: PM: PRCM interrupt: check MPUGRPSEL register
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 1/5] OMAP3: PM: Prevent hang in prcm_interrupt_handler
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 0/5] OMAP PM fixes for 2.6.32
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP3: RX51: support sleep indicator LEDs
- From: Jonathan McDowell <noodles@xxxxxxxx>
- Re: [PATCH] OMAP3: RX51: support sleep indicator LEDs
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH] OMAP3: RX51: support sleep indicator LEDs
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [RFC][PATCH 2/2] OMAP3:PM:SR: SmartReflex Refactor Rev2.0
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] video: omap2: dss: RET on idle, enable/disable dss clocks only when needed.
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH 0/2] twl4030 power support for 3430SDP
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
- Re: [PATCH 0/2] twl4030 power support for 3430SDP
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- Re: [PATCH] OMAP: I2C: Add mpu wake up latency constraint in i2c
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- [PATCH] OMAP: I2C: Add mpu wake up latency constraint in i2c
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- Re: [PATCH v2] omap_hsmmc: Add missing probe handler hook
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- [PATCH v2] omap_hsmmc: Add missing probe handler hook
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- Re: [PATCH] omap_hsmmc: Add missing probe handler hook to platform driver data
- From: Roger Quadros <ext-roger.quadros@xxxxxxxxx>
- Re: [PATCH 1/1] OMAP: I2C: Add mpu wake up latency constraint in i2c
- From: Kalle Jokiniemi <kalle.jokiniemi@xxxxxxxxx>
- Re: [PATCH] video: omap2: dss: RET on idle, enable/disable dss clocks only when needed.
- From: Tomi Valkeinen <tomi.valkeinen@xxxxxxxxx>
- [PATCH 2/2] omap iovmm: fix incorrect spelling
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- [PATCH 1/2] omap iovmm: remove cache flush operation
- From: Hiroshi DOYU <Hiroshi.DOYU@xxxxxxxxx>
- RE: [PATCH v3 0/4] TWL6030 patch series
- From: "Shilimkar, Santosh" <santosh.shilimkar@xxxxxx>
- Re: [PATCH 0/2] twl4030 power support for 3430SDP
- From: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx>
- Re: [RFC][PATCH 0/2] OMAP3:PM:SR Refactor
- From: Nishanth Menon <nm@xxxxxx>
- [RFC][PATCH 2/2] OMAP3:PM:SR: SmartReflex Refactor Rev2.0
- From: Nishanth Menon <nm@xxxxxx>
- [RFC][PATCH 1/2] OMAP3:PM:SR: prepare: remove old SR code
- From: Nishanth Menon <nm@xxxxxx>
- [RFC][PATCH 0/2] OMAP3:PM:SR Refactor
- From: Nishanth Menon <nm@xxxxxx>
- [PATCH 28/28] OMAP3: PM: Wait for SDRC ready iso a blind delay
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
- [PATCH 27/28] PM: Disable usb host HW save and restore
- From: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
[Index of Archives]
[Linux USB Devel]
[Linux WPAN Networking]
[Video for Linux]
[Scanner]
[Linux SCSI]
[Samba]
[Yosemite News]