**-- SNIP HERE --
Hi,
V2 - fixes from patch hand edition removed
+ Fix a bit of commit message.
V1 - initial patch
**-- END OF SNIP --
We used to enable and disable OPPs based on
rate being set to 0, this has been confusing in
general. So, we now allow specific OPPs to be now
enabled/disabled by an explicit enabled flag
instead of re-using rate flag itself.
Tested on: SDP3430
Cc: Sanjeev Premi <premi@xxxxxx>
Cc: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
Cc: Madhusudhan Chikkature Rajashekar <madhu.cr@xxxxxx>
Cc: Sergio Alberto Aguirre Rodriguez <saaguirre@xxxxxx>
Signed-off-by: Nishanth Menon <nm@xxxxxx>
---
arch/arm/mach-omap2/pm34xx.c | 32 ++++++++++++++--------------
arch/arm/mach-omap2/resource34xx.c | 3 ++
arch/arm/plat-omap/include/mach/omap-pm.h | 2 +
3 files changed, 21 insertions(+), 16 deletions(-)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index cea3bca..fd9fa99 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -100,41 +100,41 @@ static struct prm_setup_vc prm_setup = {
};
struct omap_opp omap3_mpu_rate_table[] = {
- {0, 0, 0},
+ {0, 0, 0, 0},
/*OPP1*/
- {S125M, VDD1_OPP1, 0x1E},
+ {true, S125M, VDD1_OPP1, 0x1E},
/*OPP2*/
- {S250M, VDD1_OPP2, 0x26},
+ {true, S250M, VDD1_OPP2, 0x26},
/*OPP3*/
- {S500M, VDD1_OPP3, 0x30},
+ {true, S500M, VDD1_OPP3, 0x30},
/*OPP4*/
- {S550M, VDD1_OPP4, 0x36},
+ {true, S550M, VDD1_OPP4, 0x36},
/*OPP5*/
- {S600M, VDD1_OPP5, 0x3C},
+ {true, S600M, VDD1_OPP5, 0x3C},
};
struct omap_opp omap3_l3_rate_table[] = {
- {0, 0, 0},
+ {0, 0, 0, 0},
/*OPP1*/
- {0, VDD2_OPP1, 0x1E},
+ {false, 0, VDD2_OPP1, 0x1E},
/*OPP2*/
- {S83M, VDD2_OPP2, 0x24},
+ {true, S83M, VDD2_OPP2, 0x24},
/*OPP3*/
- {S166M, VDD2_OPP3, 0x2C},
+ {true, S166M, VDD2_OPP3, 0x2C},
};
struct omap_opp omap3_dsp_rate_table[] = {
- {0, 0, 0},
+ {0, 0, 0, 0},
/*OPP1*/
- {S90M, VDD1_OPP1, 0x1E},
+ {true, S90M, VDD1_OPP1, 0x1E},
/*OPP2*/
- {S180M, VDD1_OPP2, 0x26},
+ {true, S180M, VDD1_OPP2, 0x26},
/*OPP3*/
- {S360M, VDD1_OPP3, 0x30},
+ {true, S360M, VDD1_OPP3, 0x30},
/*OPP4*/
- {S400M, VDD1_OPP4, 0x36},
+ {true, S400M, VDD1_OPP4, 0x36},
/*OPP5*/
- {S430M, VDD1_OPP5, 0x3C},
+ {true, S430M, VDD1_OPP5, 0x3C},
};
const struct omap_opp_table omap3_mpu_opp_table = {
diff --git a/arch/arm/mach-omap2/resource34xx.c b/arch/arm/mach-omap2/resource34xx.c
index 491e1dc..12de2c6 100644
--- a/arch/arm/mach-omap2/resource34xx.c
+++ b/arch/arm/mach-omap2/resource34xx.c
@@ -282,6 +282,9 @@ static int program_opp(int res, struct omap_opp *opp, int target_level,
t_opp = ID_VDD(res) | ID_OPP_NO(opp[target_level].opp_id);
c_opp = ID_VDD(res) | ID_OPP_NO(opp[current_level].opp_id);
#endif
+ /* only allow enabled OPPs */
+ if (!opp[target_level].enabled)
+ return -EINVAL;
/* Sanity check of the OPP params before attempting to set */
if (!opp[target_level].rate || !opp[target_level].vsel)
diff --git a/arch/arm/plat-omap/include/mach/omap-pm.h b/arch/arm/plat-omap/include/mach/omap-pm.h
index 51216cf..33e1a3e 100644
--- a/arch/arm/plat-omap/include/mach/omap-pm.h
+++ b/arch/arm/plat-omap/include/mach/omap-pm.h
@@ -21,6 +21,7 @@
/**
* struct omap_opp - clock frequency-to-OPP ID table for DSP, MPU
+ * @enabled: enabled if true, disabled if false
* @rate: target clock rate
* @opp_id: OPP ID
* @min_vdd: minimum VDD1 voltage (in millivolts) for this OPP
@@ -28,6 +29,7 @@
* Operating performance point data. Can vary by OMAP chip and board.
*/
struct omap_opp {
+ bool enabled;
unsigned long rate;
u8 opp_id;
u16 vsel;
--
1.6.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
