I have a new board - OMAP 3530 with 512MB DRAM & NAND I've build X-loader and U-Boot for it and it mostly comes up. The sources I used (based on recommendations from the BeagleBoard pages) were: http://git.gitorious.org/x-load-omap3/mainline.git git://git.denx.de/u-boot.git I had to make a small change to get it to recognize the larger NAND FLASH device. The problem I have now is that it's only seeing 1/2 (256MB) of the available DRAM. * Does anyone know how to get it to see all 512MB? * Is there a better place to ask/discuss these questions? A cursory look around did not point to anything fresh (most of the web pages & Wikis I looked are are _years_ old) Thanks for any help/pointers -- ------------------------------------------------------------ Gary Thomas | Consulting for the MLB Associates | Embedded world ------------------------------------------------------------ -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
