Re: [PATCH v2] rtc: make rtc-omap driver ioremap its register space

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Sep 16, 2009 at 05:04:58PM -0700, Mark A. Greer wrote:
> From: Mark A. Greer <mgreer@xxxxxxxxxx>
> 
> The rtc-omap driver currently assumes that the rtc's
> registers are at a fixed address and already mapped
> into virtual memory space.  Remove those assumptions
> so the same driver can be used for similar devices
> that reside at different physical addresses (e.g.,
> TI's DA8xx/OMAP-L13x SoC's).
> 
> Also allow the possibility for the timer and alarm
> interrupts to use the same IRQ.
> 
> Signed-off-by: Mark A. Greer <mgreer@xxxxxxxxxx>
> CC: David Brownell <david-b@xxxxxxxxxxx>
> ---

Ping?

Just wondering if this patch was noticed.

FYI, the following were added by subsequent emails:

	Acked-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
	Acked-by: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>
	Acked-by: Tony Lindgren <tony@xxxxxxxxxxx>

Thanks,

Mark
--
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux