From: Tero Kristo <tero.kristo@xxxxxxxxx>
This patch adds a save and restore mechanism for ARM L2 auxiliary control
register. This feature is enabled via Kconfig option
OMAP3_L2_AUX_SECURE_SAVE_RESTORE and the service ID for PPA can be provided
via option OMAP3_L2_AUX_SECURE_SERVICE_SET_ID. If bootloader does not modify
L2 aux register, using this save and restore logic for it is not needed.
Signed-off-by: Tero Kristo <tero.kristo@xxxxxxxxx>
---
arch/arm/mach-omap2/control.c | 1 +
arch/arm/mach-omap2/sleep34xx.S | 31 +++++++++++++++++++++++++++++++
arch/arm/plat-omap/Kconfig | 17 +++++++++++++++++
3 files changed, 49 insertions(+), 0 deletions(-)
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 730fc53..82d8f1a 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -95,6 +95,7 @@ void *omap3_secure_ram_storage;
*/
u32 omap3_arm_context[128];
u32 omap3_aux_ctrl[2] = { 0x1, 0x0 };
+u32 omap3_l2_aux_ctrl[2] = { 0x1, 0x0 };
struct omap3_control_regs {
u32 sysconfig;
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index 0b03bf9..e291d6d 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -288,11 +288,30 @@ restore:
mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
.word 0xE1600071 @ call SMI monitor (smi #1)
+#ifdef CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+ /* Restore L2 aux control register */
+ @ set service ID for PPA
+ mov r0, #CONFIG_OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
+ mov r12, r0 @ copy service ID in r12
+ mov r1, #0 @ set task ID for ROM code in r1
+ mov r2, #4 @ set some flags in r2, r6
+ mov r6, #0xff
+ ldr r3, write_l2_aux_control_params @ r3 points to parameters
+ ldr r4, phys_offset
+ adds r3, r3, r4
+ ldr r4, page_offset
+ subs r3, r3, r4
+ mcr p15, 0, r0, c7, c10, 4 @ data write barrier
+ mcr p15, 0, r0, c7, c10, 5 @ data memory barrier
+ .word 0xE1600071 @ call SMI monitor (smi #1)
+#endif
b logic_l1_restore
l2_inv_api_params:
.word 0x1, 0x00
write_aux_control_params:
.word omap3_aux_ctrl
+write_l2_aux_control_params:
+ .word omap3_l2_aux_ctrl
l2_inv_gp:
/* Execute smi to invalidate L2 cache */
mov r12, #0x1 @ set up to invalide L2
@@ -306,6 +325,15 @@ smi: .word 0xE1600070 @ Call SMI monitor (smieq)
ldr r0, [r1, #4]
mov r12, #0x3
.word 0xE1600070 @ Call SMI monitor (smieq)
+ /* Restore L2 AUX control register */
+ ldr r1, write_l2_aux_control_params
+ ldr r0, phys_offset
+ adds r1, r1, r0
+ ldr r0, page_offset
+ subs r1, r1, r0
+ ldr r0, [r1, #4]
+ mov r12, #0x2
+ .word 0xE1600070 @ Call SMI monitor (smieq)
logic_l1_restore:
mov r1, #0
/* Invalidate all instruction caches to PoU
@@ -433,6 +461,9 @@ save_context_wfi:
mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary Control Register
ldr r5, write_aux_control_params
str r4, [r5, #4]
+ mrc p15, 1, r4, c9, c0, 2 @ Read L2 AUX ctrl register
+ ldr r5, write_l2_aux_control_params
+ str r4, [r5, #4]
/* Check what that target sleep state is:stored in r1*/
/* 1 - Only L1 and logic lost */
/* 2 - Only L2 lost */
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 2143db5..3ff1a5f 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -185,6 +185,23 @@ config OMAP3_DEBOBS
help
Use ETK pads for debug observability
+config OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+ bool "OMAP3 HS/EMU save and restore for L2 AUX control register"
+ depends on ARCH_OMAP3 && PM
+ default n
+ help
+ Without this option, L2 Auxiliary control register contents are
+ lost during off-mode entry on HS/EMU devices. This feature
+ requires support from PPA / boot-loader in HS/EMU devices, which
+ currently does not exist by default.
+
+config OMAP3_L2_AUX_SECURE_SERVICE_SET_ID
+ int "Service ID for the support routine to set L2 AUX control"
+ depends on OMAP3_L2_AUX_SECURE_SAVE_RESTORE
+ default 43
+ help
+ PPA routine service ID for setting L2 auxiliary control register.
+
config OMAP_32K_TIMER_HZ
int "Kernel internal timer frequency for 32KHz timer"
range 32 1024
--
1.5.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
