From: Tero Kristo <tero.kristo@xxxxxxxxx>
It is suggested by TI (SWPA152 February 2009) to write clksetup,
voltsetup_time1, voltsetup_time2, voltsetup2 dynamically in idle loop.
Signed-off-by: Jouni Hogander <jouni.hogander@xxxxxxxxx>
---
arch/arm/mach-omap2/pm34xx.c | 36 +++++++++++++++++++++++++-----------
1 files changed, 25 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index f492142..ae83121 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -575,6 +575,30 @@ void omap_sram_idle(void)
if (regset_save_on_suspend)
pm_dbg_regset_save(1);
+ /* Write voltage setup times which are changed dynamically */
+ if (core_next_state == PWRDM_POWER_OFF) {
+ prm_write_mod_reg(0, OMAP3430_GR_MOD,
+ OMAP3_PRM_VOLTSETUP1_OFFSET);
+ prm_write_mod_reg(prm_setup.voltsetup2, OMAP3430_GR_MOD,
+ OMAP3_PRM_VOLTSETUP2_OFFSET);
+ prm_write_mod_reg(prm_setup.clksetup, OMAP3430_GR_MOD,
+ OMAP3_PRM_CLKSETUP_OFFSET);
+ } else {
+ prm_write_mod_reg((prm_setup.voltsetup_time2 <<
+ OMAP3430_SETUP_TIME2_SHIFT) |
+ (prm_setup.voltsetup_time1 <<
+ OMAP3430_SETUP_TIME1_SHIFT),
+ OMAP3430_GR_MOD, OMAP3_PRM_VOLTSETUP1_OFFSET);
+ prm_write_mod_reg(0, OMAP3430_GR_MOD,
+ OMAP3_PRM_VOLTSETUP2_OFFSET);
+ /*
+ * Use static 1 as only HF_CLKOUT is turned off.
+ * Value taken from application note SWPA152
+ */
+ prm_write_mod_reg(0x1, OMAP3430_GR_MOD,
+ OMAP3_PRM_CLKSETUP_OFFSET);
+ }
+
/*
* omap3_arm_context is the location where ARM registers
* get saved. The restore path then reads from this
@@ -1379,19 +1403,9 @@ static void __init configure_vc(void)
OMAP3430_GR_MOD,
OMAP3_PRM_VC_I2C_CFG_OFFSET);
- /* Write setup times */
- prm_write_mod_reg(prm_setup.clksetup, OMAP3430_GR_MOD,
- OMAP3_PRM_CLKSETUP_OFFSET);
- prm_write_mod_reg((prm_setup.voltsetup_time2 <<
- OMAP3430_SETUP_TIME2_SHIFT) |
- (prm_setup.voltsetup_time1 <<
- OMAP3430_SETUP_TIME1_SHIFT),
- OMAP3430_GR_MOD, OMAP3_PRM_VOLTSETUP1_OFFSET);
-
+ /* Write static setup times */
prm_write_mod_reg(prm_setup.voltoffset, OMAP3430_GR_MOD,
OMAP3_PRM_VOLTOFFSET_OFFSET);
- prm_write_mod_reg(prm_setup.voltsetup2, OMAP3430_GR_MOD,
- OMAP3_PRM_VOLTSETUP2_OFFSET);
pm_dbg_regset_init(1);
pm_dbg_regset_init(2);
--
1.5.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
