Re: MMC_CAP_SDIO_IRQ for omap 3430

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Dirk,

Many thanks, after sending the request yesterday I made my own attempt
which failed miserably.  My patch looks like a subset of yours so that
is to be expected.  I'll try yours out today and report back my
experience.

John

On Fri, Oct 16, 2009 at 1:16 AM, Dirk Behme <dirk.behme@xxxxxxxxxxxxxx> wrote:
> John Rigby wrote:
>>
>> I have seen several discussions about lack of sdio irq support in the
>> hsmmc driver but no patches.  Has anyone on this list implemented this
>> and/or can anyone point me to patches?
>
> What a coincidence ;)
>
> I'm currently working on this. See attachment what I currently have. It is
> compile tested only against recent omap linux head. I don't have a board
> using SDIO at the moment, so no real testing possible :(
>
> Some background, maybe it helps people to step in:
>
> Gumstix OMAP3 based Overo air board connects Marvell 88W8686 wifi by MMC
> port 2 in 4 bit configuration [1]. The wifi performance is quite bad
> (~100kB/s). There is some rumor that this might be SDIO irq related [2].
> There was an attempt to fix this [3] already, but this doesn't work [4].
> Having this, I started to look into it.
>
> I used [3], the TI Davinci driver [5] (supporting SDIO irq), the SDIO
> Simplified Specification [6] and the OMAP35x TRM [7] as starting points.
>
> Unfortunately, the Davinci MMC registers and irqs are different (Davinci has
> a dedicated SDIO irq). But combining [3] and [5] helps to get an idea what
> has to be done.
>
> I think the main issues of [3] were that it doesn't enable IBG for 4 bit
> mode ([6] chapter 8.1.2) and that mmc_omap_irq() doesn't reset the irq bits.
>
> Topics I still open:
>
> - Is it always necessary to deal with IE _and_ ISE register? I'm not totally
> clear what the difference between these two registers are ;) And in which
> order they have to be set.
>
> - Davinci driver [5] in line 1115 checks for data line to call
> mmc_signal_sdio_irq() for irq enable.
>
> - Davinci driver deals with SDIO in xfer_done() (line 873)
>
> - Davinci driver sets block size to 64 if SDIO in line 701
>
> It would be quite nice if anybody likes to comment on attachment and help
> testing.
>
> Many thanks and best regards
>
> Dirk
>
> [1] http://gumstix.net/wiki/index.php?title=Overo_Wifi
>
> [2] http://groups.google.com/group/beagleboard/msg/14e822778c5eeb56
>
> [3] http://groups.google.com/group/beagleboard/msg/d0eb69f4c20673be
>
> [4] http://groups.google.com/group/beagleboard/msg/5cdfe2a319531937
>
> [5]
> http://arago-project.org/git/projects/?p=linux-davinci.git;a=blob;f=drivers/mmc/host/davinci_mmc.c;h=1bf0587250614c6d8abfe02028b96e0e47148ac8;hb=HEAD
>
> [6] http://www.sdcard.org/developers/tech/sdio/sd_bluetooth_spec/
>
> [7] http://focus.ti.com/lit/ug/spruf98c/spruf98c.pdf
>
>
> Subject: [PATCH][RFC] OMAP HSMMC: Add SDIO interrupt support
> Form: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
>
> At the moment, OMAP HSMMC driver supports only SDIO polling, resulting in
> poor
> performance. Add support for SDIO interrupt handling.
>
> Signed-off-by: Dirk Behme <dirk.behme@xxxxxxxxxxxxxx>
> ---
>
> Patch against recent omap-linux head "Linux omap got rebuilt from scratch"
> 274c94b29ee7c53609a756acca974e4742c59559
>
> Compile tested only. Please comment and help testing.
>
>  drivers/mmc/host/omap_hsmmc.c |   48
> +++++++++++++++++++++++++++++++++++++-----
>  1 file changed, 43 insertions(+), 5 deletions(-)
>
> Index: linux-beagle/drivers/mmc/host/omap_hsmmc.c
> ===================================================================
> --- linux-beagle.orig/drivers/mmc/host/omap_hsmmc.c
> +++ linux-beagle/drivers/mmc/host/omap_hsmmc.c
> @@ -27,6 +27,7 @@
>  #include <linux/timer.h>
>  #include <linux/clk.h>
>  #include <linux/mmc/host.h>
> +#include <linux/mmc/card.h>
>  #include <linux/mmc/core.h>
>  #include <linux/io.h>
>  #include <linux/semaphore.h>
> @@ -65,6 +66,7 @@
>  #define SDVSDET                        0x00000400
>  #define AUTOIDLE               0x1
>  #define SDBP                   (1 << 8)
> +#define IBG                    (1 << 19)
>  #define DTO                    0xe
>  #define ICE                    0x1
>  #define ICS                    0x2
> @@ -76,6 +78,7 @@
>  #define INT_EN_MASK            0x307F0033
>  #define BWR_ENABLE             (1 << 4)
>  #define BRR_ENABLE             (1 << 5)
> +#define CIRQ_ENABLE            (1 << 8)
>  #define INIT_STREAM            (1 << 1)
>  #define DP_SELECT              (1 << 21)
>  #define DDIR                   (1 << 4)
> @@ -87,6 +90,7 @@
>  #define CC                     0x1
>  #define TC                     0x02
>  #define OD                     0x1
> +#define CIRQ                   (1 <<  8)
>  #define ERR                    (1 << 15)
>  #define CMD_TIMEOUT            (1 << 16)
>  #define DATA_TIMEOUT           (1 << 20)
> @@ -653,6 +657,15 @@ static irqreturn_t omap_hsmmc_irq(int ir
>        status = OMAP_HSMMC_READ(host->base, STAT);
>        dev_dbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status);
>
> +       if (status & CIRQ) {
> +               dev_dbg(mmc_dev(host->mmc), "SDIO interrupt");
> +               OMAP_HSMMC_WRITE(host->base, IE, OMAP_HSMMC_READ(host->base,
> IE)
> +                                & ~(CIRQ_ENABLE));
> +               mmc_signal_sdio_irq(host->mmc);
> +               spin_unlock(&host->irq_lock);
> +               return IRQ_HANDLED;
> +       }
> +
>        if (status & ERR) {
>  #ifdef CONFIG_MMC_DEBUG
>                omap_hsmmc_report_irq(host, status);
> @@ -1165,8 +1178,15 @@ static void omap_hsmmc_set_ios(struct mm
>                break;
>        case MMC_BUS_WIDTH_4:
>                OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8);
> -               OMAP_HSMMC_WRITE(host->base, HCTL,
> -                       OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT);
> +               if (mmc_card_sdio(host->mmc->card)) {
> +                       OMAP_HSMMC_WRITE(host->base, HCTL,
> +                                        OMAP_HSMMC_READ(host->base, HCTL)
> +                                        | IBG | FOUR_BIT);
> +               } else {
> +                       OMAP_HSMMC_WRITE(host->base, HCTL,
> +                                        OMAP_HSMMC_READ(host->base, HCTL)
> +                                        | FOUR_BIT);
> +               }
>                break;
>        case MMC_BUS_WIDTH_1:
>                OMAP_HSMMC_WRITE(host->base, CON, con & ~DW8);
> @@ -1512,6 +1532,24 @@ static int omap_hsmmc_disable_fclk(struc
>        return 0;
>  }
>
> +static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
> +{
> +       struct omap_hsmmc_host *host = mmc_priv(mmc);
> +       u32 ie, ise;
> +
> +       ise = OMAP_HSMMC_READ(host->base, ISE);
> +       ie  = OMAP_HSMMC_READ(host->base, IE);
> +
> +       if (enable) {
> +               OMAP_HSMMC_WRITE(host->base, ISE, ise | CIRQ_ENABLE);
> +               OMAP_HSMMC_WRITE(host->base, IE,  ie  | CIRQ_ENABLE);
> +       } else {
> +               OMAP_HSMMC_WRITE(host->base, ISE, ise & ~CIRQ_ENABLE);
> +               OMAP_HSMMC_WRITE(host->base, IE,  ie  & ~CIRQ_ENABLE);
> +       }
> +
> +}
> +
>  static const struct mmc_host_ops omap_hsmmc_ops = {
>        .enable = omap_hsmmc_enable_fclk,
>        .disable = omap_hsmmc_disable_fclk,
> @@ -1519,7 +1557,7 @@ static const struct mmc_host_ops omap_hs
>        .set_ios = omap_hsmmc_set_ios,
>        .get_cd = omap_hsmmc_get_cd,
>        .get_ro = omap_hsmmc_get_ro,
> -       /* NYET -- enable_sdio_irq */
> +       .enable_sdio_irq = omap_hsmmc_enable_sdio_irq,
>  };
>
>  static const struct mmc_host_ops omap_hsmmc_ps_ops = {
> @@ -1529,7 +1567,7 @@ static const struct mmc_host_ops omap_hs
>        .set_ios = omap_hsmmc_set_ios,
>        .get_cd = omap_hsmmc_get_cd,
>        .get_ro = omap_hsmmc_get_ro,
> -       /* NYET -- enable_sdio_irq */
> +       .enable_sdio_irq = omap_hsmmc_enable_sdio_irq,
>  };
>
>  #ifdef CONFIG_DEBUG_FS
> @@ -1734,7 +1772,7 @@ static int __init omap_hsmmc_probe(struc
>        mmc->max_seg_size = mmc->max_req_size;
>
>        mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
> -                    MMC_CAP_WAIT_WHILE_BUSY;
> +                    MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_SDIO_IRQ;
>
>        if (mmc_slot(host).wires >= 8)
>                mmc->caps |= MMC_CAP_8_BIT_DATA;
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux