RE: [PATCH] twl4030: Initial support for twl5031

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Koskinen,

> -----Original Message-----
> From: linux-omap-owner@xxxxxxxxxxxxxxx 
> [mailto:linux-omap-owner@xxxxxxxxxxxxxxx] On Behalf Of Ilkka Koskinen
> Sent: Thursday, September 24, 2009 9:24 PM
> To: linux-kernel@xxxxxxxxxxxxxxx; sameo@xxxxxxxxxxxxxxx
> Cc: linux-omap@xxxxxxxxxxxxxxx; felipe.balbi@xxxxxxxxx; 
> dbrownell@xxxxxxxxxxxxxxxxxxxxx; ilkka.koskinen@xxxxxxxxx
> Subject: [PATCH] twl4030: Initial support for twl5031
> 
> TWL5031 introduces two new interrupts in PIH. Moreover, BCI
> has changed remarkably and, thus, it's disabled when TWL5031
> is in use.
> 
> Signed-off-by: Ilkka Koskinen <ilkka.koskinen@xxxxxxxxx>
> ---
>  drivers/mfd/twl4030-core.c  |   15 +++++-
>  drivers/mfd/twl4030-irq.c   |  126 
> ++++++++++++++++++++++++++++++++++++++++--
>  include/linux/i2c/twl4030.h |   47 ++++++++++++++--
>  3 files changed, 175 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
> index cd1008c..952bea5 100644
> --- a/drivers/mfd/twl4030-core.c
> +++ b/drivers/mfd/twl4030-core.c
> @@ -134,6 +134,9 @@
>  #define TWL4030_BASEADD_PWMB		0x00F1
>  #define TWL4030_BASEADD_KEYPAD		0x00D2
>  
> +#define TWL5031_BASEADD_ACCESSORY	0x0074 /* Replaces Main 
> Charge */
> +#define TWL5031_BASEADD_INTERRUPTS	0x00B9 /* Different to 
> TWL4030's one */
> +
>  /* subchip/slave 3 - POWER ID */
>  #define TWL4030_BASEADD_BACKUP		0x0014
>  #define TWL4030_BASEADD_INT		0x002E
> @@ -164,6 +167,7 @@
>  /* chip-specific feature flags, for i2c_device_id.driver_data */
>  #define TWL4030_VAUX2		BIT(0)	/* pre-5030 
> voltage ranges */
>  #define TPS_SUBSET		BIT(1)	/* tps659[23]0 have 
> fewer LDOs */
> +#define TWL5031			BIT(2)  /* twl5031 has 
> different registers */
>  
>  
> /*------------------------------------------------------------
> ----------*/
>  
> @@ -216,6 +220,8 @@ static struct twl4030mapping 
> twl4030_map[TWL4030_MODULE_LAST + 1] = {
>  	{ 2, TWL4030_BASEADD_PWM1 },
>  	{ 2, TWL4030_BASEADD_PWMA },
>  	{ 2, TWL4030_BASEADD_PWMB },
> +	{ 2, TWL5031_BASEADD_ACCESSORY },
> +	{ 2, TWL5031_BASEADD_INTERRUPTS },
>  
>  	{ 3, TWL4030_BASEADD_BACKUP },
>  	{ 3, TWL4030_BASEADD_INT },
> @@ -464,7 +470,8 @@ add_children(struct twl4030_platform_data 
> *pdata, unsigned long features)
>  	struct device	*child;
>  	struct device	*usb_transceiver = NULL;
>  
> -	if (twl_has_bci() && pdata->bci && !(features & TPS_SUBSET)) {
> +	if (twl_has_bci() && pdata->bci &&
> +	    !((features & TPS_SUBSET) || (features & TWL5031))) {
>  		child = add_child(3, "twl4030_bci",
>  				pdata->bci, sizeof(*pdata->bci),
>  				false,
> @@ -707,6 +714,7 @@ static void clocks_init(struct device *dev)
>  
>  int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end);
>  int twl_exit_irq(void);
> +int twl_init_chip_irq(const char *chip);
>  
>  static int twl4030_remove(struct i2c_client *client)
>  {
> @@ -780,6 +788,10 @@ twl4030_probe(struct i2c_client *client, 
> const struct i2c_device_id *id)
>  	if (client->irq
>  			&& pdata->irq_base
>  			&& pdata->irq_end > pdata->irq_base) {
> +		status = twl_init_chip_irq(id->name);
> +		if (status < 0)
> +			goto fail;

No need to check since status is always zero.

> +
>  		status = twl_init_irq(client->irq, 
> pdata->irq_base, pdata->irq_end);
>  		if (status < 0)
>  			goto fail;
> @@ -795,6 +807,7 @@ fail:
>  static const struct i2c_device_id twl4030_ids[] = {
>  	{ "twl4030", TWL4030_VAUX2 },	/* "Triton 2" */
>  	{ "twl5030", 0 },		/* T2 updated */
> +	{ "twl5031", TWL5031 },		/* TWL5030 updated */
>  	{ "tps65950", 0 },		/* catalog version of twl5030 */
>  	{ "tps65930", TPS_SUBSET },	/* fewer LDOs and DACs; 
> no charger */
>  	{ "tps65920", TPS_SUBSET },	/* fewer LDOs; no codec 
> or charger */
> diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
> index aca2670..d781788 100644
> --- a/drivers/mfd/twl4030-irq.c
> +++ b/drivers/mfd/twl4030-irq.c
> @@ -61,6 +61,7 @@
>  
>  /* Linux could (eventually) use either IRQ line */
>  static int irq_line;
> +static int chip_is_twl5031;
>  
>  struct sih {
>  	char	name[8];
> @@ -82,6 +83,9 @@ struct sih {
>  	/* + 2 bytes padding */
>  };
>  
> +static const struct sih *sih_modules;
> +static int nr_sih_modules;
> +
>  #define SIH_INITIALIZER(modname, nbits) \
>  	.module		= TWL4030_MODULE_ ## modname, \
>  	.control_offset = TWL4030_ ## modname ## _SIH_CTRL, \
> @@ -107,7 +111,7 @@ struct sih {
>  /* Order in this table matches order in PIH_ISR.  That is,
>   * BIT(n) in PIH_ISR is sih_modules[n].
>   */
> -static const struct sih sih_modules[6] = {
> +static const struct sih sih_modules_twl4030[6] = {
>  	[0] = {
>  		.name		= "gpio",
>  		.module		= TWL4030_MODULE_GPIO,
> @@ -164,6 +168,84 @@ static const struct sih sih_modules[6] = {
>  		/* there are no SIH modules #6 or #7 ... */
>  };
> 
 
Can you add comment saying sih_modules_twl4030 is for both twl4030
and twl5030 chips? 

> +static const struct sih sih_modules_twl5031[8] = {
> +	[0] = {
> +		.name		= "gpio",
> +		.module		= TWL4030_MODULE_GPIO,
> +		.control_offset	= REG_GPIO_SIH_CTRL,
> +		.set_cor	= true,
> +		.bits		= TWL4030_GPIO_MAX,
> +		.bytes_ixr	= 3,
> +		/* Note: *all* of these IRQs default to no-trigger */
> +		.edr_offset	= REG_GPIO_EDR1,
> +		.bytes_edr	= 5,
> +		.mask = { {
> +			.isr_offset	= REG_GPIO_ISR1A,
> +			.imr_offset	= REG_GPIO_IMR1A,
> +		}, {
> +			.isr_offset	= REG_GPIO_ISR1B,
> +			.imr_offset	= REG_GPIO_IMR1B,
> +		}, },
> +	},
> +	[1] = {
> +		.name		= "keypad",
> +		.set_cor	= true,
> +		SIH_INITIALIZER(KEYPAD_KEYP, 4)
> +	},
> +	[2] = {
> +		.name		= "bci",
> +		.module		= TWL5031_MODULE_INTERRUPTS,
> +		.control_offset	= TWL5031_INTERRUPTS_BCISIHCTRL,
> +		.bits		= 7,
> +		.bytes_ixr	= 1,
> +		.edr_offset	= TWL5031_INTERRUPTS_BCIEDR1,
> +		/* Note: most of these IRQs default to no-trigger */
> +		.bytes_edr	= 2,
> +		.mask = { {
> +			.isr_offset	= TWL5031_INTERRUPTS_BCIISR1,
> +			.imr_offset	= TWL5031_INTERRUPTS_BCIIMR1,
> +		}, {
> +			.isr_offset	= TWL5031_INTERRUPTS_BCIISR2,
> +			.imr_offset	= TWL5031_INTERRUPTS_BCIIMR2,
> +		}, },
> +	},
> +	[3] = {
> +		.name		= "madc",
> +		SIH_INITIALIZER(MADC, 4)
> +	},
> +	[4] = {
> +		/* USB doesn't use the same SIH organization */
> +		.name		= "usb",
> +	},
> +	[5] = {
> +		.name		= "power",
> +		.set_cor	= true,
> +		SIH_INITIALIZER(INT_PWR, 8)
> +	},
> +	[6] = {
> +		/* ECI/DBI/BSI (ACI) does not have SIH */
> +		.name		= "aci",
> +	},

If there is no SIH, How do you determine source of interrupt in PIH? I see
you are masking ACI interrupts during init. If you unmask these interrupts,
How do you handle these interrupts? 

> +	[7] = {
> +		/* Accessory */
> +		.name		= "acc",
> +		.module		= TWL5031_MODULE_ACCESSORY,
> +		.control_offset	= TWL5031_ACCSIHCTRL,
> +		.bits		= 2,
> +		.bytes_ixr	= 1,
> +		.edr_offset	= TWL5031_ACCEDR1,
> +		/* Note: most of these IRQs default to no-trigger */
> +		.bytes_edr	= 1,
> +		.mask = { {
> +			.isr_offset	= TWL5031_ACCISR1,
> +			.imr_offset	= TWL5031_ACCIMR1,
> +		}, {
> +			.isr_offset	= TWL5031_ACCISR2,
> +			.imr_offset	= TWL5031_ACCIMR2,
> +		}, },
> +	},
> +};
> +
>  #undef TWL4030_MODULE_KEYPAD_KEYP
>  #undef TWL4030_MODULE_INT_PWR
>  #undef TWL4030_INT_PWR_EDR
> @@ -301,11 +383,20 @@ static int 
> twl4030_init_sih_modules(unsigned line)
>  	/* disable all interrupts on our line */
>  	memset(buf, 0xff, sizeof buf);
>  	sih = sih_modules;
> -	for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) {
> +	for (i = 0; i < nr_sih_modules; i++, sih++) {
>  
>  		/* skip USB -- it's funky */
> -		if (!sih->bytes_ixr)
> +		/* But don't skip TWL5031's ACI */
> +		if (!sih->bytes_ixr) {
> +			if (chip_is_twl5031 && 
> !strcmp(sih->name, "aci")) {
> +				
> twl4030_i2c_write(TWL5031_MODULE_ACCESSORY,
> +						  buf, 
> TWL5031_ACIIMR_LSB, 1);
> +				
> twl4030_i2c_write(TWL5031_MODULE_ACCESSORY,
> +						  buf, 
> TWL5031_ACIIMR_MSB, 1);
> +			}
> +
>  			continue;
> +		}
>  
>  		status = twl4030_i2c_write(sih->module, buf,
>  				sih->mask[line].imr_offset, 
> sih->bytes_ixr);
> @@ -331,13 +422,22 @@ static int 
> twl4030_init_sih_modules(unsigned line)
>  	}
>  
>  	sih = sih_modules;
> -	for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) {
> +	for (i = 0; i < nr_sih_modules; i++, sih++) {
>  		u8 rxbuf[4];
>  		int j;
>  
>  		/* skip USB */
> -		if (!sih->bytes_ixr)
> +		/* But don't skip TWL5031's ACI */
> +		if (!sih->bytes_ixr) {
> +			if (chip_is_twl5031 && 
> !strcmp(sih->name, "aci")) {
> +			

Regards,
Manjunath	
> twl4030_i2c_write(TWL5031_MODULE_ACCESSORY,
> +						  buf, 
> TWL5031_ACIIDR_LSB, 1);
> +				
> twl4030_i2c_write(TWL5031_MODULE_ACCESSORY,
> +						  buf, 
> TWL5031_ACIIDR_MSB, 1);
> +			}
> +
>  			continue;
> +		}
>  
>  		/* Clear pending interrupt status.  Either the read was
>  		 * enough, or we need to write those bits.  Repeat, in
> @@ -628,7 +728,7 @@ int twl4030_sih_setup(int module)
>  
>  	/* only support modules with standard clear-on-read for now */
>  	for (sih_mod = 0, sih = sih_modules;
> -			sih_mod < ARRAY_SIZE(sih_modules);
> +			sih_mod < nr_sih_modules;
>  			sih_mod++, sih++) {
>  		if (sih->module == module && sih->set_cor) {
>  			if (!WARN((irq_base + sih->bits) > NR_IRQS,
> @@ -763,3 +863,17 @@ int twl_exit_irq(void)
>  	}
>  	return 0;
>  }
> +
> +int twl_init_chip_irq(const char *chip)
> +{
> +	if (!strcmp(chip, "twl5031")) {
> +		chip_is_twl5031 = 1;
> +		sih_modules = sih_modules_twl5031;
> +		nr_sih_modules = ARRAY_SIZE(sih_modules_twl5031);
> +	} else {
> +		sih_modules = sih_modules_twl4030;
> +		nr_sih_modules = ARRAY_SIZE(sih_modules_twl4030);
> +	}
> +
> +	return 0;
> +}
> diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h
> index 0dc80ef..838916f 100644
> --- a/include/linux/i2c/twl4030.h
> +++ b/include/linux/i2c/twl4030.h
> @@ -58,13 +58,16 @@
>  #define TWL4030_MODULE_PWMA		0x0E
>  #define TWL4030_MODULE_PWMB		0x0F
>  
> +#define TWL5031_MODULE_ACCESSORY	0x10
> +#define TWL5031_MODULE_INTERRUPTS	0x11
> +
>  /* Slave 3 (i2c address 0x4b) */
> -#define TWL4030_MODULE_BACKUP		0x10
> -#define TWL4030_MODULE_INT		0x11
> -#define TWL4030_MODULE_PM_MASTER	0x12
> -#define TWL4030_MODULE_PM_RECEIVER	0x13
> -#define TWL4030_MODULE_RTC		0x14
> -#define TWL4030_MODULE_SECURED_REG	0x15
> +#define TWL4030_MODULE_BACKUP		0x12
> +#define TWL4030_MODULE_INT		0x13
> +#define TWL4030_MODULE_PM_MASTER	0x14
> +#define TWL4030_MODULE_PM_RECEIVER	0x15
> +#define TWL4030_MODULE_RTC		0x16
> +#define TWL4030_MODULE_SECURED_REG	0x17
>  
>  /*
>   * Read and write single 8-bit registers
> @@ -218,6 +221,38 @@ int twl4030_i2c_read(u8 mod_no, u8 
> *value, u8 reg, unsigned num_bytes);
>  
>  
> /*------------------------------------------------------------
> ----------*/
>  
> +/*
> + * Accessory Interrupts
> + */
> +#define TWL5031_ACIIMR_LSB		0x05
> +#define TWL5031_ACIIMR_MSB		0x06
> +#define TWL5031_ACIIDR_LSB		0x07
> +#define TWL5031_ACIIDR_MSB		0x08
> +#define TWL5031_ACCISR1			0x0F
> +#define TWL5031_ACCIMR1			0x10
> +#define TWL5031_ACCISR2			0x11
> +#define TWL5031_ACCIMR2			0x12
> +#define TWL5031_ACCSIR			0x13
> +#define TWL5031_ACCEDR1			0x14
> +#define TWL5031_ACCSIHCTRL		0x15
> +
> +/*-----------------------------------------------------------
> -----------*/
> +
> +/*
> + * Battery Charger Controller
> + */
> +
> +#define TWL5031_INTERRUPTS_BCIISR1	0x0
> +#define TWL5031_INTERRUPTS_BCIIMR1	0x1
> +#define TWL5031_INTERRUPTS_BCIISR2	0x2
> +#define TWL5031_INTERRUPTS_BCIIMR2	0x3
> +#define TWL5031_INTERRUPTS_BCISIR	0x4
> +#define TWL5031_INTERRUPTS_BCIEDR1	0x5
> +#define TWL5031_INTERRUPTS_BCIEDR2	0x6
> +#define TWL5031_INTERRUPTS_BCISIHCTRL	0x7
> +
> +/*-----------------------------------------------------------
> -----------*/
> +
>  /* Power bus message definitions */
>  
>  #define DEV_GRP_NULL		0x0
> -- 
> 1.6.0.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe 
> linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> --
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux