Re: [APPLIED] [PATCH] [RFC] OMAP: eliminate OMAP_MAX_NR_PORTS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Tony Lindgren <tony@xxxxxxxxxxx> [091020 16:01]:
> * Tony Lindgren <tony@xxxxxxxxxxx> [091020 15:15]:
> > * Ladislav.Michl@xxxxxxxxx <Ladislav.Michl@xxxxxxxxx> [091020 14:53]:
> > > On Fri, Oct 09, 2009 at 06:46:23PM -0400, Tony Lindgren wrote:
> > > > This patch has been applied to the linux-omap
> > > > by youw fwiendly patch wobot.
> > > > 
> > > > Branch in linux-omap: omap2-upstream
> > > > 
> > > > Initial commit ID (Likely to change): 439d2c69335a28ffdb5a9795ff384b6755ca0f7f
> > > > 
> > > > PatchWorks
> > > > http://patchwork.kernel.org/patch/52477/
> > > > 
> > > > Git (Likely to change, and takes a while to get mirrored)
> > > > http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=439d2c69335a28ffdb5a9795ff384b6755ca0f7f
> > > 
> > > This patch broke all OMAP1 boards. NULL terminator entry for omap1
> > > serial_platform_data cannot be removed just because serial driver uses
> > > is as last entry marker. Without it we end this way:
> > > Unable to handle kernel NULL pointer dereference at virtual address 00000028
> > > pgd = c0004000
> > > [00000028] *pgd=00000000
> > > Internal error: Oops: 80000005 [#1]
> > > last sysfs file:
> > > Modules linked in:
> > > CPU: 0    Not tainted  (2.6.32-rc5-06314-g4155da6-dirty #12)
> > > PC is at 0x28
> > > LR is at serial8250_config_port+0x184/0xc34
> > > (...etc...)
> > > 
> > > Please consider following fix (and while there fix OMAP2 too as patch broke
> > > it as well (untested))
> > 
> > Thanks, I already refreshed the original patch with the same fix few
> > days ago :) It should be there in for-next branch and master branch.
> 
> Correction, sorry looks like I did not really read your patch. It seems
> to be the right solution for mach-omap1, but not needed for mach-omap2
> because the array is not plat_serial8250_port on mach-omap2.

I've refreshed the original serial.c patch in for-next branch by leaving
out the mach-omap2 changes. Also updated in the master branch, can you
please check?

Thanks,

Tony

>  
> > Tony
> >  
> > > Signed-off-by: Ladislav Michl <ladis@xxxxxxxxxxxxxx>
> > > 
> > > diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
> > > index 9c59332..0392ff5 100644
> > > --- a/arch/arm/mach-omap1/serial.c
> > > +++ b/arch/arm/mach-omap1/serial.c
> > > @@ -86,7 +86,9 @@ static struct plat_serial8250_port serial_platform_data[] = {
> > >  		.iotype		= UPIO_MEM,
> > >  		.regshift	= 2,
> > >  		.uartclk	= OMAP16XX_BASE_BAUD * 16,
> > > -	},
> > > +	}, {
> > > +	}
> > > +
> > >  };
> > >  
> > >  static struct platform_device serial_device = {
> > > @@ -119,7 +121,7 @@ void __init omap_serial_init(void)
> > >  		serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
> > >  	}
> > >  
> > > -	for (i = 0; i < ARRAY_SIZE(serial_platform_data); i++) {
> > > +	for (i = 0; i < ARRAY_SIZE(serial_platform_data) - 1; i++) {
> > >  		unsigned char reg;
> > >  
> > >  		/* Static mapping, never released */
> > > diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
> > > index dabc089..ca69ffa 100644
> > > --- a/arch/arm/mach-omap2/serial.c
> > > +++ b/arch/arm/mach-omap2/serial.c
> > > @@ -585,7 +585,7 @@ void __init omap_serial_early_init(void)
> > >  	 * if not needed.
> > >  	 */
> > >  
> > > -	for (i = 0; i < ARRAY_SIZE(omap_uart); i++) {
> > > +	for (i = 0; i < ARRAY_SIZE(omap_uart) - 1; i++) {
> > >  		struct omap_uart_state *uart = &omap_uart[i];
> > >  		struct platform_device *pdev = &uart->pdev;
> > >  		struct device *dev = &pdev->dev;
> > > @@ -637,7 +637,7 @@ void __init omap_serial_init(void)
> > >  {
> > >  	int i;
> > >  
> > > -	for (i = 0; i < ARRAY_SIZE(omap_uart); i++) {
> > > +	for (i = 0; i < ARRAY_SIZE(omap_uart) - 1; i++) {
> > >  		struct omap_uart_state *uart = &omap_uart[i];
> > >  		struct platform_device *pdev = &uart->pdev;
> > >  		struct device *dev = &pdev->dev;
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux