* Tony Lindgren <tony@xxxxxxxxxxx> [091020 15:15]: > * Ladislav.Michl@xxxxxxxxx <Ladislav.Michl@xxxxxxxxx> [091020 14:53]: > > On Fri, Oct 09, 2009 at 06:46:23PM -0400, Tony Lindgren wrote: > > > This patch has been applied to the linux-omap > > > by youw fwiendly patch wobot. > > > > > > Branch in linux-omap: omap2-upstream > > > > > > Initial commit ID (Likely to change): 439d2c69335a28ffdb5a9795ff384b6755ca0f7f > > > > > > PatchWorks > > > http://patchwork.kernel.org/patch/52477/ > > > > > > Git (Likely to change, and takes a while to get mirrored) > > > http://git.kernel.org/?p=linux/kernel/git/tmlind/linux-omap-2.6.git;a=commit;h=439d2c69335a28ffdb5a9795ff384b6755ca0f7f > > > > This patch broke all OMAP1 boards. NULL terminator entry for omap1 > > serial_platform_data cannot be removed just because serial driver uses > > is as last entry marker. Without it we end this way: > > Unable to handle kernel NULL pointer dereference at virtual address 00000028 > > pgd = c0004000 > > [00000028] *pgd=00000000 > > Internal error: Oops: 80000005 [#1] > > last sysfs file: > > Modules linked in: > > CPU: 0 Not tainted (2.6.32-rc5-06314-g4155da6-dirty #12) > > PC is at 0x28 > > LR is at serial8250_config_port+0x184/0xc34 > > (...etc...) > > > > Please consider following fix (and while there fix OMAP2 too as patch broke > > it as well (untested)) > > Thanks, I already refreshed the original patch with the same fix few > days ago :) It should be there in for-next branch and master branch. Correction, sorry looks like I did not really read your patch. It seems to be the right solution for mach-omap1, but not needed for mach-omap2 because the array is not plat_serial8250_port on mach-omap2. > Tony > > > Signed-off-by: Ladislav Michl <ladis@xxxxxxxxxxxxxx> > > > > diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c > > index 9c59332..0392ff5 100644 > > --- a/arch/arm/mach-omap1/serial.c > > +++ b/arch/arm/mach-omap1/serial.c > > @@ -86,7 +86,9 @@ static struct plat_serial8250_port serial_platform_data[] = { > > .iotype = UPIO_MEM, > > .regshift = 2, > > .uartclk = OMAP16XX_BASE_BAUD * 16, > > - }, > > + }, { > > + } > > + > > }; > > > > static struct platform_device serial_device = { > > @@ -119,7 +121,7 @@ void __init omap_serial_init(void) > > serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16; > > } > > > > - for (i = 0; i < ARRAY_SIZE(serial_platform_data); i++) { > > + for (i = 0; i < ARRAY_SIZE(serial_platform_data) - 1; i++) { > > unsigned char reg; > > > > /* Static mapping, never released */ > > diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c > > index dabc089..ca69ffa 100644 > > --- a/arch/arm/mach-omap2/serial.c > > +++ b/arch/arm/mach-omap2/serial.c > > @@ -585,7 +585,7 @@ void __init omap_serial_early_init(void) > > * if not needed. > > */ > > > > - for (i = 0; i < ARRAY_SIZE(omap_uart); i++) { > > + for (i = 0; i < ARRAY_SIZE(omap_uart) - 1; i++) { > > struct omap_uart_state *uart = &omap_uart[i]; > > struct platform_device *pdev = &uart->pdev; > > struct device *dev = &pdev->dev; > > @@ -637,7 +637,7 @@ void __init omap_serial_init(void) > > { > > int i; > > > > - for (i = 0; i < ARRAY_SIZE(omap_uart); i++) { > > + for (i = 0; i < ARRAY_SIZE(omap_uart) - 1; i++) { > > struct omap_uart_state *uart = &omap_uart[i]; > > struct platform_device *pdev = &uart->pdev; > > struct device *dev = &pdev->dev; > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
