Re: 24xx/n8x0 booting again, linux-omap updated to -rc5

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tony Lindgren wrote at 2009-10-20 13:56 -0500:
> * green <greenfreedom10@xxxxxxxxx> [091020 09:31]:
> > But I must be missing something somewhere... I have not yet been able to get 
> > the N810 to boot.  I see only the Nokia splash.  Note that I just want to see 
> > the framebuffer console at this point: I expect a panic due to no root fs.
> > 
> > Attached is the config I'm using, which is based on n8x0_defconfig.
> 
> Looks like your config ends up waiting for root on the mmc. But we're missing
> what was board-n800-mmc.c, so that needs to be updated for mainline.
> You can find the old code in the omap-2.6.30 branch under arch/arm/mach-omap2
> if you have the cycles to update it.

I did not expect it to boot, even if mmc was available (no rootfs exists on 
either mmc).  But the framebuffer does not seem to be working.  I would like to 
see a console.  Any idea about that?

> Also, the drivers/cbus needs to be updated to get the GPIO pins from
> board-*.c files, otherwise the retu watchdog will power down the system
> in 30 seconds.

Yeah, I see the Nokia splash for roughly 30 seconds before the device powers 
off.

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux Arm (vger)]     [ARM Kernel]     [ARM MSM]     [Linux Tegra]     [Linux WPAN Networking]     [Linux Wireless Networking]     [Maemo Users]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Trails]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux