Hi Thara,
I regret the delay. A comment:
On Fri, 28 Aug 2009, Thara Gopinath wrote:
> MPU power domain bank 0 bits are displayed in position of bank 1
> in PWRSTS and PREPWRSTS registers. So read them from correct
> position
Indeed. What do you think about a slightly different approach: changing
powerdomains34xx.h to be correct? In other words, instead of
.pwrsts_mem_ret = {
[0] = PWRSTS_OFF_RET,
},
.pwrsts_mem_on = {
[0] = PWRSTS_OFF_ON,
},
we would use:
.pwrsts_mem_ret = {
[1] = PWRSTS_OFF_RET,
},
.pwrsts_mem_on = {
[1] = PWRSTS_OFF_ON,
},
We have to deal with the bank count field in struct powerdomain - we could
just convert it into a bitmap representing available banks. So instead
of:
.banks = 1,
use maybe:
.banks = PWRDM_BANK_1, /* | PWRDM_BANK_0, etc */
Can you foresee any problems with the above approach?
- Paul
> Patch refresh issue.
>
> arch/arm/mach-omap2/powerdomain.c | 19 +++++++++++++++++++
> 1 files changed, 19 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
> index 2594cbf..6c5fee9 100644
> --- a/arch/arm/mach-omap2/powerdomain.c
> +++ b/arch/arm/mach-omap2/powerdomain.c
> @@ -971,6 +971,16 @@ int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
> return -EEXIST;
>
> /*
> + * In 3430, for MPU domain bank 0 status bits
> + * are displayed in the position of bank1 status bits
> + * in PWST . So the hack. Think of a cleaner
> + * way of doing this
> + */
> + if (cpu_is_omap34xx())
> + if (!strcmp("mpu_pwrdm", pwrdm->name))
> + bank = 1;
> +
> + /*
> * The register bit names below may not correspond to the
> * actual names of the bits in each powerdomain's register,
> * but the type of value returned is the same for each
> @@ -1018,6 +1028,15 @@ int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
> return -EEXIST;
>
> /*
> + * In 3430, for MPU domain bank 0 status bits
> + * are displayed in the position of bank1 status bits
> + * in PREPWST . So the hack. Think of a cleaner
> + * way of doing this
> + */
> + if (cpu_is_omap34xx())
> + if (!strcmp("mpu_pwrdm", pwrdm->name))
> + bank = 1;
> + /*
> * The register bit names below may not correspond to the
> * actual names of the bits in each powerdomain's register,
> * but the type of value returned is the same for each
> --
> 1.5.4.7
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-omap" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
- Paul
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
