Linux Memory Technology Devices - Date Index

• Thread Index

• Re: [PATCH 2/3] mtd: cfi_cmdset_0002: Remove chip_ready() from do_write_buffer()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH] jffs2: Fix use of uninitialized delayed_work, lockdep breakage
  • From: Daniel Santos <daniel.santos@xxxxxxxxx>
• Re: [PATCH 1/2] mtd: spi-nor: Make SFDP-based 4B_OPCODE support detection works correctly
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxxx>
• Re: [PATCH 1/3] mtd: cfi_cmdset_0002: Change do_write_oneword() to use chip_good()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 0/3] mtd: cfi_cmdset_0002: Fix flash write issue for OpenWrt Project
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2] block: BFQ default for single queue devices
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH 3/3] mtd: cfi_cmdset_0002: Remove goto statemnet from do_write_buffer()
  • From: Tokunori Ikegami <ikegami@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] mtd: cfi_cmdset_0002: Remove chip_ready() from do_write_buffer()
  • From: Tokunori Ikegami <ikegami@xxxxxxxxxxxxxxxxxxxx>
• [PATCH 1/3] mtd: cfi_cmdset_0002: Change do_write_oneword() to use chip_good()
  • From: Tokunori Ikegami <ikegami@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] mtd: rawnand: meson: add support for Amlogic NAND flash controller
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 1/2] mtd: spi-nor: Make SFDP-based 4B_OPCODE support detection works correctly
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v5 2/2] mtd: rawnand: meson: add support for Amlogic NAND flash controller
  • From: Liang Yang <liang.yang@xxxxxxxxxxx>
• Re: [PATCH 3/3] mtd: partitions: Add OF support to RedBoot partitions
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 2/3] mtd: partitions: Add RedBoot FIS DT bindings
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v2 11/15] mtd: maps: Merge physmap_of.c into physmap-core.c
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v2 14/15] mtd: maps: Merge gpio-addr-flash.c into physmap-core.c
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v2 12/15] mtd: maps: Rename physmap_of_{versatile, gemini} into physmap-{versatile, gemini}
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v2 15/15] mtd: maps: physmap: Invert logic on if/else branch
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v2 09/15] mtd: maps: physmap: Fix coding style issues reported by checkpatch
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v2 10/15] mtd: maps: Prepare merging of physmap and physmap_of
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v2 07/15] mtd: maps: physmap: Check mtd_device_{parse_register, unregister}() ret code
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v2 06/15] mtd: maps: physmap: Remove the MAX_RESOURCES limitation
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v2 08/15] mtd: maps: physmap: Return -ENOMEM directly when info allocation fails
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v2 05/15] mtd: maps: physmap: Use devm_ioremap_resource()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v2 13/15] dt-binding: mtd: physmap: Document the addr-gpios property
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v2 02/15] mtd: maps: physmap: Rename ->map and ->mtd into ->maps and ->mtds
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v2 00/15] mtd: maps: physmap cleanups
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v2 03/15] mtd: maps: physmap: Use platform_get_resource() to retrieve iomem resources
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v2 04/15] mtd: maps: physmap: Use dev_notice() and a %pR specifier
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v2 01/15] mtd: maps: physmap: Add SPDX header
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v5 2/2] mtd: rawnand: meson: add support for Amlogic NAND flash controller
  • From: Liang Yang <liang.yang@xxxxxxxxxxx>
• Re: [PATCH v5 2/2] mtd: rawnand: meson: add support for Amlogic NAND flash controller
  • From: Liang Yang <liang.yang@xxxxxxxxxxx>
• Re: [PATCH 2/3] mtd: partitions: Add RedBoot FIS DT bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [GIT PULL] mtd: nand: Changes for 4.20
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [GIT PULL] mtd: spi-nor: Changes for 4.20
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 3/3] mtd: partitions: Add OF support to RedBoot partitions
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 2/3] mtd: partitions: Add RedBoot FIS DT bindings
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/3] mtd: Move Redboot partition parser
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v5 2/2] mtd: rawnand: meson: add support for Amlogic NAND flash controller
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v5 2/2] mtd: rawnand: meson: add support for Amlogic NAND flash controller
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v5 2/2] mtd: rawnand: meson: add support for Amlogic NAND flash controller
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v5 2/2] mtd: rawnand: meson: add support for Amlogic NAND flash controller
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: nand: meson: add Amlogic NAND controller driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] mtd: spi-nor: Make sure SFDP-based 4B_OPCODE support detection works correctly
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] mtd: spi-nor: Use 4B opcodes when the NOR advertises both 3B and 4B
  • From: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
• [PATCH 36/42] mkfs.ubifs: Compute encryption key descriptor automatically
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 18/42] mkfs.ubifs: Make sure we catch nodes that should or should not have name
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 25/42] mkfs.ubifs: Specify padding policy via command line
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 41/42] mkfs.ubifs: Print key descriptor only when generated
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 42/42] mkfs.ubifs: Use AES-256-XTS as default
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 39/42] mkfs.ubifs: Move RAND_poll to crypto.c
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 27/42] mkfs.ubifs: Remove cipher implementations from public header
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 32/42] mkfs.ubifs: Correctly use iv lengths in aes-cts mode
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 34/42] mkfs.ubifs: Use correct sizes for keys and hash lengths
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 40/42] mkfs.ubifs: Enable support for building without crypto
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 24/42] mkfs.ubifs: Get key descriptor from command line and master key from file
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 31/42] mkfs.ubifs: Accept 0x prefix for key descriptor
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 21/42] mkfs.ubifs: Cleanup add_dent_node, user path encryption helper
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 23/42] mkfs.ubifs: Make encryption dependend on (not-yet-existant) command line options
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 20/42] mkfs.ubifs: Seperate path encryption from symlink encryption helper
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 22/42] mkfs.ubifs: Replace constant values with parameters in init_fscrypt_context
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 30/42] mkfs.ubifs: Check length of master key
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 19/42] mkfs.ubifs: Free all index entry names
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 26/42] mkfs.ubifs: Initial support for encryption command lines
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 29/42] mkfs.ubifs: Cleanup over-long lines
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 28/42] mkfs.ubifs: Move fscrypt definitions and functions out of mkfs.ubifs.c
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 35/42] mkfs.ubifs: Fixup AES-XTS mode
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 37/42] mkfs.ubifs: Fix key descriptor printing
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 33/42] mkfs.ubifs: Enable Cipher selection
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 38/42] mkfs.ubifs: More fscryptctl compatibility
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 17/42] mkfs.ubifs: Move symlink data encryption to helper function
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 15/42] mkfs.ubifs: Add encrypted symlink support
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 16/42] mkfs.ubifs: Implement file contents encryption
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 09/42] mkfs.ubifs: Implement basic fscrypto context passing
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 10/42] mkfs.ubifs: Implement fscrypto context store as xattr
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 11/42] mkfs.ubifs: Store directory name len in the temporary index
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 14/42] mkfs.ubifs: Pass source/dest key len to key derive function
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 12/42] mkfs.ubifs: Implement filename encryption
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 07/42] mkfs.ubifs: Add basic fscrypto functions
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 06/42] mkfs.ubifs: Add fscrypto defines
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 05/42] mkfs.ubifs: Make r5 hash binary string aware
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 08/42] mkfs.ubifs: Implement UBIFS_FLG_ENCRYPTION
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 13/42] mkfs.ubifs: Add dummy setup for crypto
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 03/42] mkfs.ubifs: Add crypto helper functions
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 01/42] Import latest ubifs-media.h
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 00/42] mtd-utils: Add fscrypt support to mkfs.ubifs
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 04/42] mkfs.ubifs: Implement UBIFS_FLG_DOUBLE_HASH
  • From: Richard Weinberger <richard@xxxxxx>
• [PATCH 02/42] common: Add round functions
  • From: Richard Weinberger <richard@xxxxxx>
• Re: [PATCH v2] block: BFQ default for single queue devices
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [PATCH v5 2/2] mtd: rawnand: meson: add support for Amlogic NAND flash controller
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH] mtd: rawnand: r852: use generic DMA API
  • From: Christoph Hellwig <hch@xxxxxx>
• [PATCH v2 2/2] mtd: spi-nor: Use 4B opcodes when the NOR advertises both 3B and 4B
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v2 1/2] mtd: spi-nor: Make sure SFDP-based 4B_OPCODE support detection works correctly
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 1/2] mtd: spi-nor: Make SFDP-based 4B_OPCODE support detection works correctly
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2] block: BFQ default for single queue devices
  • From: Jan Kara <jack@xxxxxxx>
• [PATCH v5 2/2] mtd: rawnand: meson: add support for Amlogic NAND flash controller
  • From: Jianxin Pan <jianxin.pan@xxxxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: nand: meson: add Amlogic NAND controller driver
  • From: Jianxin Pan <jianxin.pan@xxxxxxxxxxx>
• [PATCH v5 0/2] mtd: rawnand: meson: add Amlogic NAND driver support
  • From: Jianxin Pan <jianxin.pan@xxxxxxxxxxx>
• Re: [PATCH v2] block: BFQ default for single queue devices
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [PATCH v2] block: BFQ default for single queue devices
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] block: BFQ default for single queue devices
  • From: Bryan Gurney <bgurney@xxxxxxxxxx>
• Re: [PATCH v2] block: BFQ default for single queue devices
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH 1/2] mtd: spi-nor: Make SFDP-based 4B_OPCODE support detection works correctly
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 2/2] mtd: spi-nor: Use 4B opcodes when the NOR advertises both 3B and 4B
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: Clock configuration for the SAMA5D2 NAND controller
  • From: Romain Izard <romain.izard.pro@xxxxxxxxx>
• Re: [PATCH v2] block: BFQ default for single queue devices
  • From: Jan Kara <jack@xxxxxxx>
• Re: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxxx>
• Re: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• RE: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• Re: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
• RE: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• Re: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH, RFC] ubd: remove use of blk_rq_map_sg
  • From: Christoph Hellwig <hch@xxxxxx>
• Re: [PATCH v2] block: BFQ default for single queue devices
  • From: Paolo Valente <paolo.valente@xxxxxxxxxx>
• RE: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• RE: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• RE: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• Re: [PATCH, RFC] ubd: remove use of blk_rq_map_sg
  • From: Richard Weinberger <richard.weinberger@xxxxxxxxx>
• Re: [PATCH v2] block: BFQ default for single queue devices
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxxx>
• Re: [PATCH v2] block: BFQ default for single queue devices
  • From: Paolo Valente <paolo.valente@xxxxxxxxxx>
• Re: [PATCH v2] block: BFQ default for single queue devices
  • From: Federico Motta <federico@xxxxxxxxx>
• Re: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
• Patch "jffs2: return -ERANGE when xattr buffer is too small" has been added to the 4.4-stable tree
  • From: <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] block: BFQ default for single queue devices
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] mtd: rawnand: denali: include <linux/bits.h> instead of <linux/bitops.h>
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] jffs2: free jffs2_sb_info through jffs2_kill_sb()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] jffs2: free jffs2_sb_info through jffs2_kill_sb()
  • From: Hou Tao <houtao1@xxxxxxxxxx>
• RE: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI NOR flash memories
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH] mtd: spi-nor: cadence-quadspi: Fix the return value in case of error in 'cqspi_direct_read_execute()'
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH] jffs2: free jffs2_sb_info through jffs2_kill_sb()
  • From: Richard Weinberger <richard.weinberger@xxxxxxxxx>
• Re: [PATCH] jffs2: free jffs2_sb_info through jffs2_kill_sb()
  • From: Hou Tao <houtao1@xxxxxxxxxx>
• [PATCH] mtd: rawnand: denali: include <linux/bits.h> instead of <linux/bitops.h>
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• [PATCH v2] mtd: spi-nor: Add support for SPI boot flash access for AMD Family 16h
  • From: "Grandbois, Brett" <brett.grandbois@xxxxxxxxxxxx>
• Re: [PATCH v2] block: BFQ default for single queue devices
  • From: Paolo Valente <paolo.valente@xxxxxxxxxx>
• [PATCH v3 3/3] mtd: rawnand: ams-delta: Convert the driver to ->exec_op()
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• [PATCH v3 2/3] mtd: rawnand: ams-delta: Stop using legacy .IOADDR_R/W
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• [PATCH v3 1/3] mtd: rawnand: Provide helper for polling GPIO R/B pin
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [PATCH v2] block: BFQ default for single queue devices
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: cadence-quadspi: Add new compatible for AM654 SoC
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2] block: BFQ default for single queue devices
  • From: Paolo Valente <paolo.valente@xxxxxxxxxx>
• Re: [PATCH v2] block: BFQ default for single queue devices
  • From: Paolo Valente <paolo.valente@xxxxxxxxxx>
• Re: [PATCH v2] block: BFQ default for single queue devices
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [PATCH v2] block: BFQ default for single queue devices
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2] block: BFQ default for single queue devices
  • From: Oleksandr Natalenko <oleksandr@xxxxxxxxxxxxxx>
• Re: [PATCH v2] block: BFQ default for single queue devices
  • From: Paolo Valente <paolo.valente@xxxxxxxxxx>
• Re: [PATCH v2 1/2] mtd: spi-nor: Add support of sst26wf* flash ICs protection ops
  • From: Eugeniy Paltsev <eugeniy.paltsev@xxxxxxxxxxxx>
• [PATCH v2] block: BFQ default for single queue devices
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2 4/7] mtd: spi-nor: add octal read flag for flash mt35xu512aba
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v2 5/7] mtd: m25p80: add support of octal I/O transfer
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v2 6/7] spi: nxp-fspi: add mode flag bit for octal support
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v2 3/7] mtd: spi-nor: add opcodes for octal Read/Write commands
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v2 7/7] arm64: dts: lx2160a: update fspi node
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v2 2/7] spi: spi-mem: add support for octal I/O data transfer
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v2 1/7] spi: add support for octal I/O data transfer
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v2 0/7] spi: add support for octal mode
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v2 6/7] spi: nxp-fspi: add mode flag bit for octal support
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• RE: [PATCH v2 0/7] spi: add support for octal mode
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• Re: [PATCH v2 0/7] spi: add support for octal mode
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v2 7/7] arm64: dts: lx2160a: update fspi node
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v2 1/7] spi: add support for octal I/O data transfer
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v2 5/7] spi: spi-mem: add support for octal I/O data transfer
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v2 4/7] mtd: m25p80: add support of octal I/O transfer
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v2 3/7] mtd: spi-nor: add octal read flag for flash mt35xu512aba
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v2 2/7] mtd: spi-nor: add opcodes for octal Read/Write commands
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v2 0/7] spi: add support for octal mode
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH] mtd: maps: code style: Invert logic on if/else branch
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH v2 2/3] mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver
  • From: Christophe Kerello <christophe.kerello@xxxxxx>
• [PATCH] jffs2: modify the mtime and ctime when truncate file
  • From: ZhuangShengen <zhuangshengen@xxxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: mtd: stm32_fmc2: add STM32 FMC2 NAND controller documentation
  • From: Christophe Kerello <christophe.kerello@xxxxxx>
• [GIT PULL] mtd: nand: Changes for 4.20
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 09/14] mtd: maps: physmap: Fix coding style issues reported by checkpatch
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 12/14] mtd: maps: Merge gpio-addr-flash.c into physmap-core.c
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 1/2] mtd: physmap_of: Move custom initialization
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 1/2] mtd: physmap_of: Move custom initialization
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] ubifs: Fix WARN_ON logic in exit path
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH] ubifs: Fix WARN_ON logic in exit path
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: ubifs: WARNINGs
  • From: Richard Weinberger <richard.weinberger@xxxxxxxxx>
• [PATCH] ubifs: Fix WARN_ON logic in exit path
  • From: Richard Weinberger <richard@xxxxxx>
• Re: [PATCH v2 2/2] mtd: rawnand: ams-delta: Use ->exec_op()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] mtd: rawnand: Provide helper for polling GPIO R/B pin
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• ubifs: WARNINGs
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v2 2/2] mtd: rawnand: ams-delta: Use ->exec_op()
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• [PATCH v2 1/2] mtd: rawnand: Provide helper for polling GPIO R/B pin
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: mtd: stm32_fmc2: add STM32 FMC2 NAND controller documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• [GIT PULL] mtd: spi-nor: Changes for 4.20
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v3] mtd: spi-nor: fsl-quadspi: fix read error for flash size larger than 16MB
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2] spi-nor: intel-spi: Add support for Intel Ice Lake SPI serial flash
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [GIT PULL] mtd: Fix for 4.19-rc8
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] mtd: spinand: winbond: Add support for W25N01GV
  • From: Robert Marko <robimarko@xxxxxxxxx>
• Re: [PATCH 0/3] spi-nor: Add Octal SPI support
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] mtd: sa1100: avoid VLA in sa1100_setup_mtd
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 1/2] mtd: physmap_of: Move custom initialization
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] mtd: sa1100: avoid VLA in sa1100_setup_mtd
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] mtd: spinand: winbond: Add support for W25N01GV
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] mtd: sa1100: avoid VLA in sa1100_setup_mtd
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH RFC 15/18] mtd: spi-nor: Add DTR support to the spi-mem logic
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH RFC 08/18] mtd: spi-nor: Define the DPI, QPI and OPI hwcaps
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH RFC 00/18] mtd: spi-nor: Proposal for 8-8-8 mode support
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH RFC 06/18] mtd: spi-nor: Move m25p80 code in spi-nor.c
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH RFC 16/18] mtd: spi-nor: Add the concept of full DTR modes
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH RFC 17/18] mtd: spi-nor: Add 8D-8D-8D mode
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH RFC 07/18] mtd: spi-nor: Rework hwcaps selection for the spi-mem case
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH RFC 05/18] spi: spi-mem: mxic: Add support for DTR and Octo mode
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH RFC 09/18] mtd: spi-nor: Add spi_nor_{read, write}_reg() helpers
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH RFC 14/18] mtd: spi-nor: Clarify where DTR mode applies
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH RFC 11/18] mtd: spi-nor: Prepare things for 2byte opcodes
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH RFC 12/18] mtd: spi-nor: Provide a hook to tweak flash parameters
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH RFC 18/18] mtd: spi-nor: Make sure the 8D-8D-8D can be selected on mx25uw51245g
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH RFC 10/18] mtd: spi-nor: Add support for X-X-X modes
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH RFC 13/18] mtd: spi-nor: Add 8-8-8 mode support to Macronix mx25uw51245g
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH RFC 03/18] spi: spi-mem: Prepare things for DTR mode support
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH RFC 02/18] spi: Prepare things for octo mode support
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH RFC 04/18] spi: spi-mem: Prepare things for dual bytes opcodes support
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH RFC 01/18] mtd: spi-nor: Add a flash_info entry for Macronix mx25uw51245g
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [GIT PULL] mtd: Fix for 4.19-rc8
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• RE: [PATCH v3 1/2] mtd: spi-nor: add macros related to MICRON flash
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• Re: [PATCH v3 1/2] mtd: spi-nor: add macros related to MICRON flash
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [RESEND][PATCH 4.4-stable] jffs2: return -ERANGE when xattr buffer is too small
  • From: Hou Tao <houtao1@xxxxxxxxxx>
• Re: [PATCH] mtd: spi-nor: Add support for SPI boot flash access for AMD Family 16h
  • From: kbuild test robot <lkp@xxxxxxxxx>
• RE: [PATCH v2 2/2] mtd: spi-nor: add entry for mt35xu512aba flash
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v3 2/2] mtd: spi-nor: add entry for mt35xu512aba flash
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v3 1/2] mtd: spi-nor: add macros related to MICRON flash
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v3 0/2] mtd: spi-nor: add entry for mt35xu512aba flash
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• Re: [PATCH v4 2/5] dt-bindings: spi: add binding file for NXP FlexSPI controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 16/17] mtd_blkdevs: convert to blk-mq
  • From: Richard Weinberger <richard@xxxxxx>
• Re: [PATCH 16/17] mtd_blkdevs: convert to blk-mq
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [PATCH 16/17] mtd_blkdevs: convert to blk-mq
  • From: Richard Weinberger <richard@xxxxxx>
• Re: [PATCH 16/17] mtd_blkdevs: convert to blk-mq
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [PATCH 16/17] mtd_blkdevs: convert to blk-mq
  • From: Richard Weinberger <richard.weinberger@xxxxxxxxx>
• [PATCH 2/2] mtd: physmap_of_gemini: Handle pin control
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2] mtd: physmap_of: Move custom initialization
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 16/17] mtd_blkdevs: convert to blk-mq
  • From: Jens Axboe <axboe@xxxxxxxxx>
• Re: [PATCH v2 2/2] mtd: spi-nor: add entry for mt35xu512aba flash
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
• Re: [PATCH 4.4-stable] jffs2: return -ERANGE when xattr buffer is too small
  • From: "gregkh@xxxxxxxxxxxxxxxxxxx >> Greg Kroah-Hartman" <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 2/5] dt-bindings: spi: add binding file for NXP FlexSPI controller
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v4 4/5] arm64: defconfig: enable NXP FlexSPI driver
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH 5/5] MAINTAINERS: add maintainers for the NXP FlexSPI driver
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v4 3/5] arm64: dts: lx2160a: add FlexSPI node property
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH 2/2] [v2] lib/bch: fix possible stack overrun
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 1/2] mtd: docg3: don't set conflicting BCH_CONST_PARAMS option
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v4 1/5] spi: spi-mem: Add driver for NXP FlexSPI controller
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v4 0/5] spi: spi-mem: Add driver for NXP FlexSPI controller
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v2 2/2] mtd: spi-nor: add entry for mt35xu512aba flash
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v2 1/2] mtd: spi-nor: add macros related to MICRON flash
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v2 0/2] mtd: spi-nor: add entry for mt35xu512aba flash
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH] mtd: spi-nor: Add support for SPI boot flash access for AMD Family 16h
  • From: Brett Grandbois <brett.grandbois@xxxxxxxxxxxx>
• [PATCH] mtd: sa1100: avoid VLA in sa1100_setup_mtd
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] mtd: rawnand: fsmc: Fix unchecked return value in fsmc_read_page_hwecc
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] eeprom: at25: Drop obsolete cast in at25_ee_write()
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] eeprom: at25: Split writes in two SPI transfers to optimize DMA
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 2/3] eeprom: at25: Use spi_message_init_with_transfers() instead of open coding
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 1/3] eeprom: at25: Drop obsolete cast in at25_ee_write()
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 1/3] eeprom: at25: Drop obsolete cast in at25_ee_write()
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 3/3] eeprom: at25: Split writes in two SPI transfers to optimize DMA
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 2/3] eeprom: at25: Use spi_message_init_with_transfers() instead of open coding
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• [PATCH 0/3] eeprom: at25: SPI transfer improvements
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH 14/14] dt-binding: mtd: physmap: Document the addr-gpios property
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 03/14] mtd: maps: physmap: Use platform_get_resource() to retrieve iomem resources
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 06/14] mtd: maps: physmap: Remove the MAX_RESOURCES limitation
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 09/14] mtd: maps: physmap: Fix coding style issues reported by checkpatch
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 14/14] dt-binding: mtd: physmap: Document the addr-gpios property
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH 09/14] mtd: maps: physmap: Fix coding style issues reported by checkpatch
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH 06/14] mtd: maps: physmap: Remove the MAX_RESOURCES limitation
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH 03/14] mtd: maps: physmap: Use platform_get_resource() to retrieve iomem resources
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH 12/14] mtd: maps: Merge gpio-addr-flash.c into physmap-core.c
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 11/14] mtd: maps: Merge physmap_of.c into physmap-core.c
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 12/14] mtd: maps: Merge gpio-addr-flash.c into physmap-core.c
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH 11/14] mtd: maps: Merge physmap_of.c into physmap-core.c
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [RESEND PATCH 1/2] mtd: spi-nor: add macros related to MICRON flash
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
• Re: [PATCH v4 2/5] dt-bindings: spi: add binding file for NXP FlexSPI controller
  • From: Shawn Guo <shawnguo@xxxxxxxxxx>
• [PATCH 11/14] mtd: maps: Merge physmap_of.c into physmap-core.c
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 12/14] mtd: maps: Merge gpio-addr-flash.c into physmap-core.c
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 06/14] mtd: maps: physmap: Remove the MAX_RESOURCES limitation
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 13/14] mtd: maps: Rename physmap_of_{versatile, gemini} into physmap-{versatile, gemini}
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 05/14] mtd: maps: physmap: Use devm_ioremap_resource()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 09/14] mtd: maps: physmap: Fix coding style issues reported by checkpatch
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 07/14] mtd: maps: physmap: Check mtd_device_{parse_register, unregister}() ret code
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 10/14] mtd: maps: Prepare merging of physmap and physmap_of
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 14/14] dt-binding: mtd: physmap: Document the addr-gpios property
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 08/14] mtd: maps: physmap: Return -ENOMEM directly when info allocation fails
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 02/14] mtd: maps: physmap: Rename ->map and ->mtd into ->maps and ->mtds
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 00/14] mtd: maps: physmap cleanups
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 03/14] mtd: maps: physmap: Use platform_get_resource() to retrieve iomem resources
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 04/14] mtd: maps: physmap: Use dev_notice() and a %pR specifier
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 01/14] mtd: maps: physmap: Add SPDX header
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v4 1/5] spi: spi-mem: Add driver for NXP FlexSPI controller
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 0/3] spi-nor: Add Octal SPI support
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v10 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v3 1/5] spi: spi-mem: Add driver for NXP FlexSPI controller
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v4 5/5] MAINTAINERS: add maintainers for the NXP FlexSPI driver
  • From: Yogesh Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v4 4/5] arm64: defconfig: enable NXP FlexSPI driver
  • From: Yogesh Gaur <yogeshnarayan.gaur@xxxxxxx>
• RE: [PATCH v3 1/5] spi: spi-mem: Add driver for NXP FlexSPI controller
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v4 3/5] arm64: dts: lx2160a: add FlexSPI node property
  • From: Yogesh Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v4 2/5] dt-bindings: spi: add binding file for NXP FlexSPI controller
  • From: Yogesh Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v4 1/5] spi: spi-mem: Add driver for NXP FlexSPI controller
  • From: Yogesh Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH v4 0/5] spi: spi-mem: Add driver for NXP FlexSPI controller
  • From: Yogesh Gaur <yogeshnarayan.gaur@xxxxxxx>
• Re: [PATCH v10 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Paolo Valente <paolo.valente@xxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [PATCH] mtd: spinand: winbond: Add support for W25N01GV
  • From: Robert Marko <robimarko@xxxxxxxxx>
• [PATCH] jffs2: free jffs2_sb_info through jffs2_kill_sb()
  • From: Hou Tao <houtao1@xxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Paolo Valente <paolo.valente@xxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v10 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v10 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH] lib/bch: fix possible stack overrun
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v10 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH] lib/bch: fix possible stack overrun
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v10 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH v10 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH v10 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH v10 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH][mtd-next] mtd: rawnand: fix spelling mistake "card_registred" -> "card_registered"
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: denali: set SPARE_AREA_SKIP_BYTES register to 8 if unset
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v10 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] mtd: rawnand: marvell: fix the IRQ handler complete() condition
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v10 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] [v2] ARM: omap1: add nand_chip declaration
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: ixp4xx: include linux/mtd/platnand.h
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH] mtd: rawnand: toshiba: Pass a single nand_chip object to the status helper
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v10 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH v10 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v10 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• FIX Re: GPMI IMX6ull timeout on dma
  • From: Michael Nazzareno Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v10 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 2/3] mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v10 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH v2 1/3] dt-bindings: mtd: stm32_fmc2: add STM32 FMC2 NAND controller documentation
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v2 2/3] mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver
  • From: <christophe.kerello@xxxxxx>
• [PATCH v2 1/3] dt-bindings: mtd: stm32_fmc2: add STM32 FMC2 NAND controller documentation
  • From: <christophe.kerello@xxxxxx>
• [PATCH v2 3/3] mtd: rawnand: stm32_fmc2: add manual mode
  • From: <christophe.kerello@xxxxxx>
• [PATCH v2 0/3] mtd: rawnand: add STM32 FMC2 NAND flash controller driver
  • From: <christophe.kerello@xxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Paolo Valente <paolo.valente@xxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Jan Kara <jack@xxxxxxx>
• Re: Nandsim, UBIFS and memory concerns
  • From: Richard Weinberger <richard.weinberger@xxxxxxxxx>
• Re: Nandsim, UBIFS and memory concerns
  • From: Richard Weinberger <richard@xxxxxx>
• Re: Nandsim, UBIFS and memory concerns
  • From: Romain Izard <romain.izard.pro@xxxxxxxxx>
• Re: [PATCH v10 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH] UBI: mark expected switch fall-throughs
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: Nandsim, UBIFS and memory concerns
  • From: Romain Izard <romain.izard.pro@xxxxxxxxx>
• Re: [PATCH v10 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH 4.4-stable] jffs2: return -ERANGE when xattr buffer is too small
  • From: Hou Tao <houtao1@xxxxxxxxxx>
• Re: [PATCH v10 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v10 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [RFC PATCH] mtd: maps: Get rid of the latch-addr-flash driver
  • From: Sekhar Nori <nsekhar@xxxxxx>
• Re: [RFC PATCH] mtd: maps: Get rid of the latch-addr-flash driver
  • From: Vignesh R <vigneshr@xxxxxx>
• RE: [RESEND PATCH 1/2] mtd: spi-nor: add macros related to MICRON flash
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• Re: Nandsim, UBIFS and memory concerns
  • From: Steve deRosier <derosier@xxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• [RFC PATCH] mtd: maps: Get rid of the latch-addr-flash driver
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v10 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: Nandsim, UBIFS and memory concerns
  • From: Richard Weinberger <richard.weinberger@xxxxxxxxx>
• Re: Nandsim, UBIFS and memory concerns
  • From: Richard Weinberger <richard.weinberger@xxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Paolo Valente <paolo.valente@xxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Paolo Valente <paolo.valente@xxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Alan Cox <gnomes@xxxxxxxxxxxxxxxxxxx>
• Nandsim, UBIFS and memory concerns
  • From: Romain Izard <romain.izard.pro@xxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v2 00/29] at24: remove at24_platform_data
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH v2 00/29] at24: remove at24_platform_data
  • From: Sowmini Varadhan <sowmini.varadhan@xxxxxxxxxx>
• Re: GPMI IMX6ull timeout on dma
  • From: Michael Nazzareno Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 09/10] dt-binding: mtd: Document gpio-addr-flash
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v10 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v10 09/10] dt-binding: mtd: Document gpio-addr-flash
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [RFC PATCH] mtd: rawnand: ams-delta: use ->exec_op()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [RFC PATCH] mtd: rawnand: ams-delta: use ->exec_op()
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [PATCH v6 09/10] dt-binding: mtd: Document gpio-addr-flash
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [RFC PATCH] mtd: rawnand: ams-delta: use ->exec_op()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2 00/29] at24: remove at24_platform_data
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC PATCH] mtd: rawnand: ams-delta: use ->exec_op()
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• [PATCH v8 01/10] mtd: physmap_of: Release resources on error
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v8 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v8 01/10] mtd: physmap_of: Release resources on error
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v7 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH v6 01/10] mtd: physmap_of: Release resources on error
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v6 02/10] mtd: physmap_of: Remove unused struct of_device_id
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v6 10/10] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v6 08/10] mtd: maps: gpio-addr-flash: Convert to gpiod
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v6 09/10] dt-binding: mtd: Document gpio-addr-flash
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v6 07/10] mtd: maps: gpio-addr-flash: Replace array with an integer
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v6 04/10] mtd: maps: gpio-addr-flash: Fix ioremapped size
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v6 05/10] mtd: maps: gpio-addr-flash: Use devm_* functions
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v6 06/10] mtd: maps: gpio-addr-flash: Use order insted of size
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v6 02/10] mtd: physmap_of: Remove unused struct of_device_id
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v6 03/10] mtd: maps: gpio-addr-flash: Replace custom printk
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v6 01/10] mtd: physmap_of: Release resources on error
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH 1/4] spi: add support for octal I/O data transfer
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• RE: [PATCH 1/4] spi: add support for octal I/O data transfer
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• Re: [PATCH 1/3] mtd: spi-nor: Add Octal mode support for mt35xu512aba
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 0/3] spi-nor: Add Octal SPI support
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 1/3] mtd: spi-nor: Add Octal mode support for mt35xu512aba
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v2 00/29] at24: remove at24_platform_data
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH 1/3] mtd: spi-nor: Add Octal mode support for mt35xu512aba
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 0/3] spi-nor: Add Octal SPI support
  • From: Vignesh R <vigneshr@xxxxxx>
• RE: [PATCH 4/4] arm64: dts: lx2160a: update fspi node
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• RE: [PATCH 0/4] spi: add support for octal mode data transfer
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] mtd: physmap_of: Remove unused struct of_device_id
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 1/3] mtd: spi-nor: Add Octal mode support for mt35xu512aba
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 0/4] spi: add support for octal mode data transfer
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH 2/4] mtd: spi-nor: add support for octal mode data transfer
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: lx2160a: update fspi node
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• RE: [PATCH 1/4] spi: add support for octal I/O data transfer
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH 3/4] spi: nxp-fspi: add mode flag bit for octal support
  • From: Yogesh Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH 4/4] arm64: dts: lx2160a: update fspi node
  • From: Yogesh Gaur <yogeshnarayan.gaur@xxxxxxx>
• RE: [PATCH 4/4] arm64: dts: lx2160a: update fspi node
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• Re: [PATCH 1/4] spi: add support for octal I/O data transfer
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 4/4] arm64: dts: lx2160a: update fspi node
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• RE: [PATCH 1/4] spi: add support for octal I/O data transfer
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• Re: [PATCH 1/3] mtd: spi-nor: Add Octal mode support for mt35xu512aba
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 2/4] mtd: spi-nor: add support for octal mode data transfer
  • From: Yogesh Gaur <yogeshnarayan.gaur@xxxxxxx>
• Re: [PATCH 1/4] spi: add support for octal I/O data transfer
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 1/4] spi: add support for octal I/O data transfer
  • From: Yogesh Gaur <yogeshnarayan.gaur@xxxxxxx>
• [PATCH 0/4] spi: add support for octal mode data transfer
  • From: Yogesh Gaur <yogeshnarayan.gaur@xxxxxxx>
• Re: [PATCH v5 7/8] dt-binding: mtd: Document gpio-addr-flash
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• RE: [PATCH 1/3] mtd: spi-nor: Add Octal mode support for mt35xu512aba
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Andreas Herrmann <aherrmann@xxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Johannes Thumshirn <jthumshirn@xxxxxxx>
• Re: [PATCH 1/3] mtd: spi-nor: Add Octal mode support for mt35xu512aba
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Jan Kara <jack@xxxxxxx>
• RE: [PATCH 1/3] mtd: spi-nor: Add Octal mode support for mt35xu512aba
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• Re: [PATCH v5 7/8] dt-binding: mtd: Document gpio-addr-flash
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v5 7/8] dt-binding: mtd: Document gpio-addr-flash
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v5 7/8] dt-binding: mtd: Document gpio-addr-flash
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH v5 7/8] dt-binding: mtd: Document gpio-addr-flash
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v5 8/8] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2 00/29] at24: remove at24_platform_data
  • From: Florian Fainelli <f.fainelli@xxxxxxxxx>
• Re: [PATCH v5 7/8] dt-binding: mtd: Document gpio-addr-flash
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2 00/29] at24: remove at24_platform_data
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [LINUX PATCH v11 3/3] mtd: rawnand: arasan: Add support for Arasan NAND Flash Controller
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v5 8/8] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v5 6/8] mtd: maps: gpio-addr-flash: Convert to gpiod
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v5 4/8] mtd: maps: gpio-addr-flash: Use order insted of size
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v5 7/8] dt-binding: mtd: Document gpio-addr-flash
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v5 2/8] mtd: maps: gpio-addr-flash: Fix ioremapped size
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v5 5/8] mtd: maps: gpio-addr-flash: Replace array with an integer
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v5 3/8] mtd: maps: gpio-addr-flash: Use devm_* functions
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v5 1/8] mtd: maps: gpio-addr-flash: Replace custom printk
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [LINUX PATCH v11 3/3] mtd: rawnand: arasan: Add support for Arasan NAND Flash Controller
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v4 8/8] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [LINUX PATCH v11 2/3] mtd: rawnand: Add an option to get sdr timing mode number
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 0/3] spi-nor: Add Octal SPI support
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Bryan Gurney <bgurney@xxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Paolo Valente <paolo.valente@xxxxxxxxxx>
• Re: [PATCH v4 8/8] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 3/3] mtd: spi-nor: cadence-quadspi: Add support for Octal SPI controller
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH v4 6/8] mtd: maps: gpio-addr-flash: Convert to gpiod
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 1/3] mtd: spi-nor: Add Octal mode support for mt35xu512aba
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 2/3] dt-bindings: cadence-quadspi: Add new compatible for AM654 SoC
  • From: Vignesh R <vigneshr@xxxxxx>
• [PATCH 0/3] spi-nor: Add Octal SPI support
  • From: Vignesh R <vigneshr@xxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Paolo Valente <paolo.valente@xxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Paolo Valente <paolo.valente@xxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Paolo Valente <paolo.valente@xxxxxxxxxx>
• Re: [PATCH v4 6/8] mtd: maps: gpio-addr-flash: Convert to gpiod
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Paolo Valente <paolo.valente@xxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Paolo Valente <paolo.valente@xxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Paolo Valente <paolo.valente@xxxxxxxxxx>
• [PATCH 0/8] mtd: spi-nor: Random cleanups
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 1/8] mtd: spi-nor: Set SPI_NOR_4B_OPCODES on all >16MB Spansion NORs
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 3/8] mtd: spi-nor: Avoid forward declaration of internal functions
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 4/8] mtd: spi-nor: Stop passing info to set_4byte()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 5/8] mtd: spi-nor: Make the enable argument passed to set_byte() a bool
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 8/8] mtd: spi-nor: Move Spansion erase related fixup to a dedicated function
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 6/8] mtd: spi-nor: Create a ->set_4byte() method
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v4 6/8] mtd: maps: gpio-addr-flash: Convert to gpiod
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH v4 6/8] mtd: maps: gpio-addr-flash: Convert to gpiod
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Bart Van Assche <bvanassche@xxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 2/8] mtd: spi-nor: Drop inline on all internal helpers
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH 7/8] mtd: spi-nor: Explicitly flag all Micron NORs as supporting locking
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [RFC PATCH] mtd: rawnand: ams-delta: use ->exec_op()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [RFC PATCH] mtd: rawnand: ams-delta: use ->exec_op()
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Jan Kara <jack@xxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Christoph Hellwig <hch@xxxxxxxxxxxxx>
• Re: [RFC PATCH] mtd: rawnand: ams-delta: use ->exec_op()
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] mtd: rawnand: marvell: fix the IRQ handler complete() condition
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [RFC PATCH] mtd: rawnand: ams-delta: use ->exec_op()
  • From: Janusz Krzysztofik <jmkrzyszt@xxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Oleksandr Natalenko <oleksandr@xxxxxxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• [PATCH] mtd: rawnand: marvell: fix the IRQ handler complete() condition
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Damien Le Moal <Damien.LeMoal@xxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] mtd: spi-nor: fsl-quadspi: Don't let -EINVAL on the bus
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] mtd: spi-nor: Support controllers with limited TX FIFO size
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] mtd: devices: m25p80: Make sure WRITE_EN is issued before each write
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Artem Bityutskiy <dedekind1@xxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Paolo Valente <paolo.valente@xxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Richard Weinberger <richard@xxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH mtd-www] Remove references to the "unstable bits" issue
  • From: David Oberhollenzer <david.oberhollenzer@xxxxxxxxxxxxx>
• Re: [PATCH mtd-www] Add UBI stress testing section
  • From: David Oberhollenzer <david.oberhollenzer@xxxxxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] block: BFQ default for single queue devices
  • From: Jens Axboe <axboe@xxxxxxxxx>
• GPMI IMX6ull timeout on dma
  • From: Michael Nazzareno Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
• [PATCH] block: BFQ default for single queue devices
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH mtd-www] Remove references to the "unstable bits" issue
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: denali: set SPARE_AREA_SKIP_BYTES register to 8 if unset
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH mtd-www] Remove references to the "unstable bits" issue
  • From: David Oberhollenzer <david.oberhollenzer@xxxxxxxxxxxxx>
• Re: [PATCH mtd-utils] mkfs.ubifs: Fix xattr nlink value
  • From: David Oberhollenzer <david.oberhollenzer@xxxxxxxxxxxxx>
• Re: [PATCH] mtd-utils: Instead of doing preprocessor magic, just output off_t as long long
  • From: David Oberhollenzer <david.oberhollenzer@xxxxxxxxxxxxx>
• Re: [PATCH] libmtd: don't print an error message for devices without ecc support
  • From: David Oberhollenzer <david.oberhollenzer@xxxxxxxxxxxxx>
• Re: [PATCH] mtd-utils: common.h: fix prompt function
  • From: David Oberhollenzer <david.oberhollenzer@xxxxxxxxxxxxx>
• [PATCH mtd-www] Add UBI stress testing section
  • From: Martin Lund <malu@xxxxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: How to organize UBI volumes and power crash
  • From: Richard Weinberger <richard@xxxxxx>
• Re: How to organize UBI volumes and power crash
  • From: "Мясоедов А.Ю." <myasoedovau@xxxxxxxxxxxx>
• Re: How to organize UBI volumes and power crash
  • From: Richard Weinberger <richard@xxxxxx>
• Re: How to organize UBI volumes and power crash
  • From: "Мясоедов А.Ю." <myasoedovau@xxxxxxxxxxxx>
• Re: How to organize UBI volumes and power crash
  • From: Richard Weinberger <richard.weinberger@xxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• How to organize UBI volumes and power crash
  • From: "Мясоедов А.Ю." <myasoedovau@xxxxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 8/8] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v4 4/8] mtd: maps: gpio-addr-flash: Use order insted of size
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v4 7/8] dt-binding: mtd: Document gpio-addr-flash
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v4 5/8] mtd: maps: gpio-addr-flash: Replace array with an integer
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v4 3/8] mtd: maps: gpio-addr-flash: Use devm_* functions
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v4 2/8] mtd: maps: gpio-addr-flash: Fix ioremapped size
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v4 1/8] mtd: maps: gpio-addr-flash: Replace custom printk
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH v4 6/8] mtd: maps: gpio-addr-flash: Convert to gpiod
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH v2 5/8] mtd: maps: gpio-addr-flash: Replace array with an integer
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH v2 5/8] mtd: maps: gpio-addr-flash: Replace array with an integer
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 2/2] ARM: ixp4xx: include linux/mtd/platnand.h
  • From: khalasa@xxxxxxx (Krzysztof Hałasa)
• Re: [PATCH v2 6/8] mtd: maps: gpio-addr-flash: Split allocation in two
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH v2 6/8] mtd: maps: gpio-addr-flash: Split allocation in two
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2 6/8] mtd: maps: gpio-addr-flash: Split allocation in two
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH v3 1/5] spi: spi-mem: Add driver for NXP FlexSPI controller
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• RE: [PATCH v3 1/5] spi: spi-mem: Add driver for NXP FlexSPI controller
  • From: Yogesh Narayan Gaur <yogeshnarayan.gaur@xxxxxxx>
• Re: [PATCH v3 1/5] spi: spi-mem: Add driver for NXP FlexSPI controller
  • From: Frieder Schrempf <frieder.schrempf@xxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [RFC/RFT PATCH v1 0/9] mtd: fsl: quadspi: Fixes for fsl-quadspi.c driver (vybrid HW)
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: [RFC/RFT PATCH v1 0/9] mtd: fsl: quadspi: Fixes for fsl-quadspi.c driver (vybrid HW)
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [RFC/RFT PATCH v1 0/9] mtd: fsl: quadspi: Fixes for fsl-quadspi.c driver (vybrid HW)
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: [RFC/RFT PATCH v1 9/9] mtd: spi: Skip reading the Serial Flash Discoverable Parameters
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: [PATCH v3 1/5] spi: spi-mem: Add driver for NXP FlexSPI controller
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2 3/8] mtd: maps: gpio-addr-flash: Use devm_* functions
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [RFC/RFT PATCH v1 0/9] mtd: fsl: quadspi: Fixes for fsl-quadspi.c driver (vybrid HW)
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [RFC/RFT PATCH v1 9/9] mtd: spi: Skip reading the Serial Flash Discoverable Parameters
  • From: Cyrille Pitchen <cyrille.pitchen@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: nand: meson: add Amlogic NAND controller driver
  • From: Liang Yang <liang.yang@xxxxxxxxxxx>
• Re: [PATCH v4 2/2] mtd: rawnand: meson: add support for Amlogic NAND flash controller
  • From: Liang Yang <liang.yang@xxxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH v2] mtd: rawnand: denali: set SPARE_AREA_SKIP_BYTES register to 8 if unset
  • From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
• Applied "spi: spi-mem: Fix inverted logic in op sanity check" to the spi tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 8/8] dt-binding: mtd: Document gpio-addr-flash
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 2/5] dt-bindings: spi: add binding file for NXP FlexSPI controller
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: nand: meson: add Amlogic NAND controller driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH][mtd-next] mtd: rawnand: fix spelling mistake "card_registred" -> "card_registered"
  • From: Colin King <colin.king@xxxxxxxxxxxxx>
• Re: [PATCH v2 0/8] gpio-addr-flash: Support for device-tree and cleanup
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2 5/8] mtd: maps: gpio-addr-flash: Replace array with an integer
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2 7/8] mtd: maps: gpio-addr-flash: Add support for device-tree devices
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v2 3/8] mtd: maps: gpio-addr-flash: Use devm_* functions
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• RE: [LINUX PATCH v11 1/3] dt-bindings: mtd: arasan: Add device tree binding documentation
  • From: Naga Sureshkumar Relli <nagasure@xxxxxxxxxx>
• [PATCH mtd-utils] mkfs.ubifs: Fix xattr nlink value
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH] mtd: rawnand: toshiba: Pass a single nand_chip object to the status helper
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v4 2/2] mtd: rawnand: meson: add support for Amlogic NAND flash controller
  • From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH v4 2/2] mtd: rawnand: meson: add support for Amlogic NAND flash controller
  • From: Liang Yang <liang.yang@xxxxxxxxxxx>
• Re: [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH v2] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• Re: [PATCH] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• Re: [PATCH] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• Re: [PATCH] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• [RFC/RFT PATCH v1 7/9] mtd: spi: Add SPI_NOR_DUAL_READ property for the 'n25q128a13' Micron memory
  • From: Lukasz Majewski <lukma@xxxxxxx>
• [RFC/RFT PATCH v1 9/9] mtd: spi: Skip reading the Serial Flash Discoverable Parameters
  • From: Lukasz Majewski <lukma@xxxxxxx>
• [RFC/RFT PATCH v1 8/9] mtd: spi: Allocate memory corresponding to maximal fsl-quadspi.c controller area
  • From: Lukasz Majewski <lukma@xxxxxxx>
• [RFC/RFT PATCH v1 6/9] mtd: spi: Enhance the fsl_qspi_read() method to support DUAL and QUAD
  • From: Lukasz Majewski <lukma@xxxxxxx>
• [RFC/RFT PATCH v1 5/9] mtd: spi: Provide LUT entry to perform DUAL read
  • From: Lukasz Majewski <lukma@xxxxxxx>
• [RFC/RFT PATCH v1 4/9] mtd: spi: Modify the HW capability mask according to supported RX lanes
  • From: Lukasz Majewski <lukma@xxxxxxx>
• [RFC/RFT PATCH v1 0/9] mtd: fsl: quadspi: Fixes for fsl-quadspi.c driver (vybrid HW)
  • From: Lukasz Majewski <lukma@xxxxxxx>
• [RFC/RFT PATCH v1 2/9] mtd: qspi: Provide quirk to read only half of RX buffer (NXP's vybrid)
  • From: Lukasz Majewski <lukma@xxxxxxx>
• [RFC/RFT PATCH v1 1/9] Revert "mtd: fsl-quadspi: Rename SEQID_QUAD_READ to SEQID_READ"
  • From: Lukasz Majewski <lukma@xxxxxxx>
• [RFC/RFT PATCH v1 3/9] mtd: spi: Do not setup the default seqid as we got it set for DUAL and QUAD
  • From: Lukasz Majewski <lukma@xxxxxxx>
• [PATCH] mtd: rawnand: marvell: check for RDY bits after enabling the IRQ
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• Re: Trouble with new marvell_nand driver on PXA3xx
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• Re: [PATCH] [v2] ARM: omap1: add nand_chip declaration
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] [v2] ARM: omap1: add nand_chip declaration
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [PATCH] [v2] ARM: omap1: add nand_chip declaration
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: [PATCH 1/2] ARM: omap1: add nand_chip declaration
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH] [v2] ARM: omap1: add nand_chip declaration
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [LINUX PATCH v11 1/3] dt-bindings: mtd: arasan: Add device tree binding documentation
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] ARM: ixp4xx: include linux/mtd/platnand.h
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• [PATCH 1/2] ARM: omap1: add nand_chip declaration
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 2/2] ARM: ixp4xx: include linux/mtd/platnand.h
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH] arm64: dts: rockchip: Enable SPI NOR flash on Rock64
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• Re: [PATCH] arm64: dts: rockchip: Enable SPI NOR flash on Rock64
  • From: Frieder Schrempf <frieder.schrempf@xxxxxxxxx>
• [PATCH v3 8/8] dt-binding: mtd: Document gpio-addr-flash
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• Re: [PATCH v2 8/8] dt-binding: mtd: Document gpio-addr-flash
  • From: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
• [PATCH] arm64: dts: rockchip: Enable SPI NOR flash on Rock64
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH v2 8/8] dt-binding: mtd: Document gpio-addr-flash
  • From: Rob Herring <robh@xxxxxxxxxx>
• [LINUX PATCH v11 0/3] Add support for Arasan NAND Flash controller
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• [LINUX PATCH v11 3/3] mtd: rawnand: arasan: Add support for Arasan NAND Flash Controller
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• [LINUX PATCH v11 2/3] mtd: rawnand: Add an option to get sdr timing mode number
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• [LINUX PATCH v11 1/3] dt-bindings: mtd: arasan: Add device tree binding documentation
  • From: Naga Sureshkumar Relli <naga.sureshkumar.relli@xxxxxxxxxx>
• Re: [PATCH] spi: spi-mem: Fix inverted logic in op sanity check
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• [PATCH] spi: spi-mem: Fix inverted logic in op sanity check
  • From: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
• Re: [PATCH 3/3] spi: spi-mem: Add extra sanity checks on the op param
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/3] mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver
  • From: Christophe Kerello <christophe.kerello@xxxxxx>
• Re: [PATCH 1/3] dt-bindings: mtd: stm32_fmc2: add STM32 FMC2 NAND controller documentation
  • From: Christophe Kerello <christophe.kerello@xxxxxx>
• Re: Questions about the Freescale/NXP QuadSPI controller
  • From: Lukasz Majewski <lukma@xxxxxxx>
• Re: [PATCH] mtd: spi-nor: cadence-quadspi: Use proper enum for dma_unmap_single
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
• Re: [PATCH] mtd: spi-nor: cadence-quadspi: Use proper enum for dma_unmap_single
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• [PATCH v2] mtd: spi-nor: cadence-quadspi: Use proper enum for dma_unmap_single
  • From: Nathan Chancellor <natechancellor@xxxxxxxxx>
• Re: [PATCH] mtd: spi-nor: cadence-quadspi: Use proper enum for dma_unmap_single
  • From: Tudor Ambarus <tudor.ambarus@xxxxxxxxxxxxx>
• Re: Questions about the Freescale/NXP QuadSPI controller
  • From: Frieder Schrempf <frieder.schrempf@xxxxxxxxx>
• Re: Trouble with new marvell_nand driver on PXA3xx
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• Re: [PATCH 2/3] mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 2/3] mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: mtd: stm32_fmc2: add STM32 FMC2 NAND controller documentation
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• Re: [PATCH 2/3] mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver
  • From: Christophe Kerello <christophe.kerello@xxxxxx>
• Re: [PATCH 2/3] mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver
  • From: Christophe Kerello <christophe.kerello@xxxxxx>
• Re: [PATCH 1/3] dt-bindings: mtd: stm32_fmc2: add STM32 FMC2 NAND controller documentation
  • From: Christophe Kerello <christophe.kerello@xxxxxx>
• [PATCH 4.18 043/235] mtd/maps: fix solutionengine.c printk format warnings
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4.14 032/173] mtd/maps: fix solutionengine.c printk format warnings
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4.9 018/111] mtd/maps: fix solutionengine.c printk format warnings
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 4.4 11/70] mtd/maps: fix solutionengine.c printk format warnings
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3.18 067/105] mtd/maps: fix solutionengine.c printk format warnings
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] mtd: spi-nor: Add support of sst26wf* flash ICs protection ops
  • From: Eugeniy Paltsev <eugeniy.paltsev@xxxxxxxxxxxx>
• [PATCH] mtd: rawnand: toshiba: Pass a single nand_chip object to the status helper
  • From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
• Re: Trouble with new marvell_nand driver on PXA3xx
  • From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
• RE: [LINUX PATCH v10 2/2] mtd: rawnand: arasan: Add support for Arasan NAND Flash Controller
  • From: Naga Sureshkumar Relli <nagasure@xxxxxxxxxx>
• Re: Trouble with new marvell_nand driver on PXA3xx
  • From: Daniel Mack <daniel@xxxxxxxxxx>