[PATCH 1/2] mtd: spi-nor: Make SFDP-based 4B_OPCODE support detection works correctly

[Boris Brezillon <boris.brezillon@xxxxxxxxxxx>]

Some flash_info entries have the SPI_NOR_4B_OPCODES to let the core
know that the flash supports 4B opcode. While this solution works fine
for id-based caps detection, it doesn't work that well when relying on
SFDP-based caps detection. Let's add an SNOR_F_4B_OPCODES flag so that
spi_nor_parse_bfpt() can add it when the BFPT_DWORD1_ADDRESS_BYTES
field is set to BFPT_DWORD1_ADDRESS_BYTES_4_ONLY.

Reported-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
---
 drivers/mtd/spi-nor/spi-nor.c | 11 ++++++++---
 include/linux/mtd/spi-nor.h   |  1 +
 2 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
index 9407ca5f9443..85e57e9ea1b5 100644
--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -2643,6 +2643,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
 		break;
 
 	case BFPT_DWORD1_ADDRESS_BYTES_4_ONLY:
+		nor->flags |= SNOR_F_4B_OPCODES;
 		nor->addr_width = 4;
 		break;
 
@@ -3552,7 +3553,7 @@ static int spi_nor_init(struct spi_nor *nor)
 
 	if ((nor->addr_width == 4) &&
 	    (JEDEC_MFR(nor->info) != SNOR_MFR_SPANSION) &&
-	    !(nor->info->flags & SPI_NOR_4B_OPCODES)) {
+	    !(nor->flags & SNOR_F_4B_OPCODES)) {
 		/*
 		 * If the RESET# pin isn't hooked up properly, or the system
 		 * otherwise doesn't perform a reset command in the boot
@@ -3586,7 +3587,7 @@ void spi_nor_restore(struct spi_nor *nor)
 	/* restore the addressing mode */
 	if ((nor->addr_width == 4) &&
 	    (JEDEC_MFR(nor->info) != SNOR_MFR_SPANSION) &&
-	    !(nor->info->flags & SPI_NOR_4B_OPCODES) &&
+	    !(nor->flags & SNOR_F_4B_OPCODES) &&
 	    (nor->flags & SNOR_F_BROKEN_RESET))
 		set_4byte(nor, nor->info, 0);
 }
@@ -3744,11 +3745,15 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
 		nor->addr_width = 4;
 		if (JEDEC_MFR(info) == SNOR_MFR_SPANSION ||
 		    info->flags & SPI_NOR_4B_OPCODES)
-			spi_nor_set_4byte_opcodes(nor, info);
+			nor->flags |= SNOR_F_4B_OPCODES;
 	} else {
 		nor->addr_width = 3;
 	}
 
+	if (info->addr_width == 4 &&
+	    nor->flags & SNOR_F_4B_OPCODES)
+		spi_nor_set_4byte_opcodes(nor, info);
+
 	if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
 		dev_err(dev, "address width is too large: %u\n",
 			nor->addr_width);
diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
index 7f0c7303575e..4ffb165f4f85 100644
--- a/include/linux/mtd/spi-nor.h
+++ b/include/linux/mtd/spi-nor.h
@@ -236,6 +236,7 @@ enum spi_nor_option_flags {
 	SNOR_F_READY_XSR_RDY	= BIT(4),
 	SNOR_F_USE_CLSR		= BIT(5),
 	SNOR_F_BROKEN_RESET	= BIT(6),
+	SNOR_F_4B_OPCODES	= BIT(7)
 };
 
 /**
-- 
2.14.1


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/