[PATCH v10 09/10] dt-binding: mtd: Document gpio-addr-flash

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add documentation for gpio-addr-flash. This binding allow creating
flash devices that are paged using GPIOs.

Cc: devicetree@xxxxxxxxxxxxxxx
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@xxxxxxxxx>
---
 Documentation/devicetree/bindings/mtd/mtd-physmap.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
index 232fa12e90ef..7df0dcaccb7d 100644
--- a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
+++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt
@@ -29,6 +29,8 @@ file systems on embedded devices.
  - use-advanced-sector-protection: boolean to enable support for the
    advanced sector protection (Spansion: PPB - Persistent Protection
    Bits) locking.
+ - addr-gpios : (optional) List of GPIO descriptors that will be used to
+   address the MSBs address lines. The order goes from LSB to MSB.
 
 For JEDEC compatible devices, the following additional properties
 are defined:
-- 
2.19.0


______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/



[Index of Archives]     [LARTC]     [Bugtraq]     [Yosemite Forum]     [Photo]

  Powered by Linux