Re: [PATCH v2 1/2] mtd: spi-nor: Add support of sst26wf* flash ICs protection ops

[Eugeniy Paltsev <eugeniy.paltsev@xxxxxxxxxxxx>]

Hi!

Maybe you have any comments or remarks about this patch?
And if you don't could you please apply it. Thanks!

On Mon, 2018-09-10 at 14:46 +0300, Eugeniy Paltsev wrote:
> sst26wf flash series block protection implementation differs
> from other SST series, so add specific implementation
> flash_lock/flash_unlock/flash_is_locked functions for sst26wf
> flash ICs.
> 
> NOTE:
> this patch is basically following mine u-boot commit port:
> http://git.denx.de/?p=u-boot.git;a=commitdiff;h=3d4fed87a5fa3ffedf64ff2811cd95c5ac4503ac
> 
> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@xxxxxxxxxxxx>
> ---
> Changes v1->v2:
>  * Check return value of {read | write}_reg callbacks.
> 
>  drivers/mtd/spi-nor/spi-nor.c | 177 ++++++++++++++++++++++++++++++++++++++++++
>  include/linux/mtd/spi-nor.h   |   4 +
>  2 files changed, 181 insertions(+)
> 
> diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c
> index d9c368c44194..d0e7c85b6002 100644
> --- a/drivers/mtd/spi-nor/spi-nor.c
> +++ b/drivers/mtd/spi-nor/spi-nor.c
> @@ -598,6 +598,177 @@ static int write_sr_and_check(struct spi_nor *nor, u8 status_new, u8 mask)
>  	return ((ret & mask) != (status_new & mask)) ? -EIO : 0;
>  }
>  
> +/*
> + * sst26wf016/sst26wf032/sst26wf064 have next block protection:
> + * 4x   - 8  KByte blocks - read & write protection bits - upper addresses
> + * 1x   - 32 KByte blocks - write protection bits
> + * rest - 64 KByte blocks - write protection bits
> + * 1x   - 32 KByte blocks - write protection bits
> + * 4x   - 8  KByte blocks - read & write protection bits - lower addresses
> + *
> + * We'll support only per 64k lock/unlock so lower and upper 64 KByte region
> + * will be treated as single block.
> + */
> +#define SST26_BPR_8K_NUM		4
> +#define SST26_MAX_BPR_REG_LEN		(18 + 1)
> +#define SST26_BOUND_REG_SIZE		((32 + SST26_BPR_8K_NUM * 8) * SZ_1K)
> +
> +enum lock_ctl {
> +	SST26_CTL_LOCK,
> +	SST26_CTL_UNLOCK,
> +	SST26_CTL_CHECK
> +};
> +
> +static bool sst26_process_bpr(u32 bpr_size, u8 *cmd, u32 bit, enum lock_ctl ctl)
> +{
> +	switch (ctl) {
> +	case SST26_CTL_LOCK:
> +		cmd[bpr_size - (bit / 8) - 1] |= BIT(bit % 8);
> +		break;
> +	case SST26_CTL_UNLOCK:
> +		cmd[bpr_size - (bit / 8) - 1] &= ~BIT(bit % 8);
> +		break;
> +	case SST26_CTL_CHECK:
> +		return !!(cmd[bpr_size - (bit / 8) - 1] & BIT(bit % 8));
> +	}
> +
> +	return false;
> +}
> +
> +/*
> + * Lock, unlock or check lock status of the flash region of the flash (depending
> + * on the lock_ctl value)
> + */
> +static int sst26_lock_ctl(struct spi_nor *nor, loff_t ofs, uint64_t len, enum lock_ctl ctl)
> +{
> +	struct mtd_info *mtd = &nor->mtd;
> +	u32 i, bpr_ptr, rptr_64k, lptr_64k, bpr_size;
> +	bool lower_64k = false, upper_64k = false;
> +	u8 bpr_buff[SST26_MAX_BPR_REG_LEN] = {};
> +	int ret;
> +
> +	/* Check length and offset for 64k alignment */
> +	if ((ofs & (SZ_64K - 1)) || (len & (SZ_64K - 1))) {
> +		dev_err(nor->dev, "length or offset is not 64KiB allighned\n");
> +		return -EINVAL;
> +	}
> +
> +	if (ofs + len > mtd->size) {
> +		dev_err(nor->dev, "range is more than device size: %#llx + %#llx > %#llx\n",
> +			ofs, len, mtd->size);
> +		return -EINVAL;
> +	}
> +
> +	/* SST26 family has only 16 Mbit, 32 Mbit and 64 Mbit IC */
> +	if (mtd->size != SZ_2M &&
> +	    mtd->size != SZ_4M &&
> +	    mtd->size != SZ_8M)
> +		return -EINVAL;
> +
> +	bpr_size = 2 + (mtd->size / SZ_64K / 8);
> +
> +	ret = nor->read_reg(nor, SPINOR_OP_READ_BPR, bpr_buff, bpr_size);
> +	if (ret < 0) {
> +		dev_err(nor->dev, "fail to read block-protection register\n");
> +		return ret;
> +	}
> +
> +	rptr_64k = min_t(u32, ofs + len, mtd->size - SST26_BOUND_REG_SIZE);
> +	lptr_64k = max_t(u32, ofs, SST26_BOUND_REG_SIZE);
> +
> +	upper_64k = ((ofs + len) > (mtd->size - SST26_BOUND_REG_SIZE));
> +	lower_64k = (ofs < SST26_BOUND_REG_SIZE);
> +
> +	/* Lower bits in block-protection register are about 64k region */
> +	bpr_ptr = lptr_64k / SZ_64K - 1;
> +
> +	/* Process 64K blocks region */
> +	while (lptr_64k < rptr_64k) {
> +		if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl))
> +			return EACCES;
> +
> +		bpr_ptr++;
> +		lptr_64k += SZ_64K;
> +	}
> +
> +	/* 32K and 8K region bits in BPR are after 64k region bits */
> +	bpr_ptr = (mtd->size - 2 * SST26_BOUND_REG_SIZE) / SZ_64K;
> +
> +	/* Process lower 32K block region */
> +	if (lower_64k)
> +		if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl))
> +			return EACCES;
> +
> +	bpr_ptr++;
> +
> +	/* Process upper 32K block region */
> +	if (upper_64k)
> +		if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl))
> +			return EACCES;
> +
> +	bpr_ptr++;
> +
> +	/* Process lower 8K block regions */
> +	for (i = 0; i < SST26_BPR_8K_NUM; i++) {
> +		if (lower_64k)
> +			if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl))
> +				return EACCES;
> +
> +		/* In 8K area BPR has both read and write protection bits */
> +		bpr_ptr += 2;
> +	}
> +
> +	/* Process upper 8K block regions */
> +	for (i = 0; i < SST26_BPR_8K_NUM; i++) {
> +		if (upper_64k)
> +			if (sst26_process_bpr(bpr_size, bpr_buff, bpr_ptr, ctl))
> +				return EACCES;
> +
> +		/* In 8K area BPR has both read and write protection bits */
> +		bpr_ptr += 2;
> +	}
> +
> +	/* If we check region status we don't need to write BPR back */
> +	if (ctl == SST26_CTL_CHECK)
> +		return 0;
> +
> +	ret = nor->write_reg(nor, SPINOR_OP_WRITE_BPR, bpr_buff, bpr_size);
> +	if (ret < 0) {
> +		dev_err(nor->dev, "fail to write block-protection register\n");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int sst26_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
> +{
> +	return sst26_lock_ctl(nor, ofs, len, SST26_CTL_UNLOCK);
> +}
> +
> +static int sst26_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
> +{
> +	return sst26_lock_ctl(nor, ofs, len, SST26_CTL_LOCK);
> +}
> +
> +/*
> + * Returns EACCES (positive value) if region is locked, 0 if region is unlocked,
> + * and negative on errors.
> + */
> +static int sst26_is_locked(struct spi_nor *nor, loff_t ofs, uint64_t len)
> +{
> +	/*
> +	 * is_locked function is used for check before reading or erasing flash
> +	 * region, so offset and length might be not 64k allighned, so adjust
> +	 * them to be 64k allighned as sst26_lock_ctl works only with 64k
> +	 * allighned regions.
> +	 */
> +	ofs -= ofs & (SZ_64K - 1);
> +	len = len & (SZ_64K - 1) ? (len & ~(SZ_64K - 1)) + SZ_64K : len;
> +
> +	return sst26_lock_ctl(nor, ofs, len, SST26_CTL_CHECK);
> +}
> +
>  static void stm_get_locked_range(struct spi_nor *nor, u8 sr, loff_t *ofs,
>  				 uint64_t *len)
>  {
> @@ -2872,6 +3043,12 @@ int spi_nor_scan(struct spi_nor *nor, const char *name,
>  		nor->flash_is_locked = stm_is_locked;
>  	}
>  
> +	if (JEDEC_MFR(info) == SNOR_MFR_SST && info->id[1] == 0x26) {
> +		nor->flash_lock = sst26_lock;
> +		nor->flash_unlock = sst26_unlock;
> +		nor->flash_is_locked = sst26_is_locked;
> +	}
> +
>  	if (nor->flash_lock && nor->flash_unlock && nor->flash_is_locked) {
>  		mtd->_lock = spi_nor_lock;
>  		mtd->_unlock = spi_nor_unlock;
> diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h
> index e60da0d34cc1..246014a73f83 100644
> --- a/include/linux/mtd/spi-nor.h
> +++ b/include/linux/mtd/spi-nor.h
> @@ -93,6 +93,10 @@
>  #define SPINOR_OP_WRDI		0x04	/* Write disable */
>  #define SPINOR_OP_AAI_WP	0xad	/* Auto address increment word program */
>  
> +/* Used for SST26* flashes only. */
> +#define SPINOR_OP_READ_BPR	0x72	/* Read block protection register */
> +#define SPINOR_OP_WRITE_BPR	0x42	/* Write block protection register */
> +
>  /* Used for S3AN flashes only */
>  #define SPINOR_OP_XSE		0x50	/* Sector erase */
>  #define SPINOR_OP_XPP		0x82	/* Page program */
-- 
 Eugeniy Paltsev
______________________________________________________
Linux MTD discussion mailing list
http://lists.infradead.org/mailman/listinfo/linux-mtd/