Hi Lukasz, Le 27/09/2018 à 00:07, Lukasz Majewski a écrit : > The fsl-quadspi.c driver is not supporting SPINOR_OP_RDSFDP (0x5a) > read opcode - in the legacy driver we do read some garbage > data from AHB mapped area and then return on the first check If your controller reads garbage then spi_nor_parse_sfdp() fails and exists on the very first check: signature of the SFDP header. Hence everything should already go on as if the SPI_NOR_SKIP_SFDP flag is set. So this patch doesn't change anything for your controller but prevents other controller from using QSPI protocols like SPI 1-4-4. This patch introduces a regression for other chips. Best regards, Cyrille > (L2376 @ ./mtd/spi-nor/spi-nor.c) > > Signed-off-by: Lukasz Majewski <lukma@xxxxxxx> > --- > drivers/mtd/spi-nor/spi-nor.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c > index 442102be174e..c79b8c33aeeb 100644 > --- a/drivers/mtd/spi-nor/spi-nor.c > +++ b/drivers/mtd/spi-nor/spi-nor.c > @@ -1103,7 +1103,7 @@ static const struct flash_info spi_nor_ids[] = { > { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) }, > { "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_QUAD_READ) }, > { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ) }, > - { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ) }, > + { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_QUAD_READ | SPI_NOR_DUAL_READ | SPI_NOR_SKIP_SFDP) }, > { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) }, > { "n25q256ax1", INFO(0x20bb19, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_QUAD_READ) }, > { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) }, > ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/