Linux MMC Development

• Thread Index

• Re: [PATCHv2 2/5] ARM: dts: exynos: unuse the slot-node and deprecated the supports-highspeed for dw-mmc
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• RE: [PATCHv2 2/5] ARM: dts: exynos: unuse the slot-node and deprecated the supports-highspeed for dw-mmc
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• Re: [PATCH] mmc: mxs: fix card detection in case of 'broken-cd' flag set
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• RE: [PATCH 3/3] mmc: dw_mmc: Support voltage changes
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• Re: [PATCH] mmc: dw_mmc: add support for RK3288.
  • From: addy ke <addy.ke@xxxxxxxxxxxxxx>
• Re: [PATCH] mmc: dw_mmc: add support for RK3288.
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: One bug of SDHCI driver
  • From: "Fu, Zhonghui" <zhonghui.fu@xxxxxxxxxxxxxxx>
• [PATCH v2] mmc: jz4740: add dma infrastructure for data transfers
  • From: Apelete Seketeli <apelete@xxxxxxxxxxxx>
• [PATCH v2] Use DMA for data transfers in JZ4740 MMC driver
  • From: Apelete Seketeli <apelete@xxxxxxxxxxxx>
• [PATCH] mmc: dw_mmc: add support for RK3288.
  • From: addy ke <addy.ke@xxxxxxxxxxxxxx>
• mmc-utils on android
  • From: Mike Wilson <mikewse@xxxxxxxxxxx>
• [PATCH] mmc: jz4740: add dma infrastructure for data transfers
  • From: Apelete Seketeli <apelete@xxxxxxxxxxxx>
• [PATCH] Use DMA for data transfers in JZ4740 MMC driver
  • From: Apelete Seketeli <apelete@xxxxxxxxxxxx>
• Re: [PATCHv2 4/5] ARM: dts: rockchip: unuse the slot-node and deprecated the supports-highspeed for dw-mmc
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCHv2 0/5] ARM: remove the sub-node and deprecated supports-highspeed property for dwmmc.
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• RE: [PATCH 3/3] mmc: dw_mmc: Support voltage changes
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• Re: One bug of SDHCI driver
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH 1/2] mmc: hsmmc: Add reset gpio configuration option.
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] mmc: hsmmc: Add reset gpio configuration option.
  • From: Felipe Balbi <balbi@xxxxxx>
• [PATCH 1/2] mmc: hsmmc: Add reset gpio configuration option.
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [PATCH 2/2] Documentation: devicetree: mmc: Document reset-gpio property
  • From: Marek Belisko <marek@xxxxxxxxxxxxx>
• [RESEND PATCH v5] mmc: sdhci: Replace host->mmc with mmc where possible
  • From: Markus Mayer <markus.mayer@xxxxxxxxxx>
• One bug of SDHCI driver
  • From: "Fu, Zhonghui" <zhonghui.fu@xxxxxxxxxxxxxxx>
• Re: [PATCH] mmc: add new au6601 driver
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• RE: [RFC PATCH 1/1 v7]mmc: Support-FFU-for-eMMC-v5.0
  • From: Alex Lemberg <Alex.Lemberg@xxxxxxxxxxx>
• Re: [RFC PATCH 1/1 v7]mmc: Support-FFU-for-eMMC-v5.0
  • From: Gwendal Grignou <gwendal@xxxxxxxxxx>
• Re: [RFC PATCH 1/1 v7]mmc: Support-FFU-for-eMMC-v5.0
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Re: [PATCH 1/2] mfd: rtsx: add dma transfer function
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH] mmc: add new au6601 driver
  • From: Oleksij Rempel <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] mfd: rtsx: add dma transfer function
  • From: micky <micky_ching@xxxxxxxxxxxxxx>
• Re: [PATCH] mmc: sdhci: avoid double-delay while transitioning to 1.8V
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2] mmc: sdhci-pci: SDIO host controller support for Intel Quark X1000
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 2/2] mmc: rtsx: add support for async request
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: one doubt about mmc_sdio_init_card function
  • From: Aaron Lu <aaron.lu@xxxxxxxxx>
• Re: [PATCH V2 3/3] mmc: mmci: Reverse IRQ handling for the arm_variant
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: [PATCH V2 3/3] mmc: mmci: Reverse IRQ handling for the arm_variant
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [RFC PATCH 1/1 v7]mmc: Support-FFU-for-eMMC-v5.0
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [RFC 1/2] pwrseq: Add subsystem to handle complex power sequences
  • From: Arend van Spriel <arend@xxxxxxxxxxxx>
• Re: [RFC 1/2] pwrseq: Add subsystem to handle complex power sequences
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [RFC 1/2] pwrseq: Add subsystem to handle complex power sequences
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [RFC 1/2] pwrseq: Add subsystem to handle complex power sequences
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [RFC 1/2] pwrseq: Add subsystem to handle complex power sequences
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [RFC PATCH 1/1 v7]mmc: Support-FFU-for-eMMC-v5.0
  • From: Grant Grundler <grundler@xxxxxxxxxxxx>
• Re: mwifiex card reset
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• WiFi card through sdio interface in kernel 3.10.17
  • From: jags gediya <jags.gediya@xxxxxxxxx>
• Re: mwifiex card reset
  • From: Yuvaraj Cd <yuvaraj.lkml@xxxxxxxxx>
• RE: [RFC PATCH 1/1 v7]mmc: Support-FFU-for-eMMC-v5.0
  • From: Avi Shchislowski <Avi.Shchislowski@xxxxxxxxxxx>
• Re: [PATCH 3/3] mmc: dw_mmc: Support voltage changes
  • From: Yuvaraj Kumar <yuvaraj.cd@xxxxxxxxx>
• Re: mwifiex card reset
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• Re: [PATCHv2 0/5] ARM: remove the sub-node and deprecated supports-highspeed property for dwmmc.
  • From: Sachin Kamat <spk.linux@xxxxxxxxx>
• Re: mwifiex card reset
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• Re: mwifiex card reset
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: mwifiex card reset
  • From: James Cameron <quozl@xxxxxxxxxx>
• RE: mwifiex card reset
  • From: Bing Zhao <bzhao@xxxxxxxxxxx>
• Re: mwifiex card reset
  • From: James Cameron <quozl@xxxxxxxxxx>
• RE: mwifiex card reset
  • From: Bing Zhao <bzhao@xxxxxxxxxxx>
• Re: [RFC PATCH 1/1 v7]mmc: Support-FFU-for-eMMC-v5.0
  • From: Hsin-Hsiang Tseng <hsinhsiangtseng@xxxxxxxxx>
• one doubt about mmc_sdio_init_card function
  • From: "Fu, Zhonghui" <zhonghui.fu@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [RFC PATCH 1/1 v7]mmc: Support-FFU-for-eMMC-v5.0
  • From: Chris Ball <chris@xxxxxxxxxx>
• Re: [RFC PATCH 1/1 v7]mmc: Support-FFU-for-eMMC-v5.0
  • From: Grant Grundler <grundler@xxxxxxxxxxxx>
• Re: mwifiex card reset
  • From: Daniel Mack <daniel@xxxxxxxxxx>
• [PATCH] s3cmci: Move to clk_prepare_enable/clk_disable_unprepare
  • From: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
• Re: [PATCH v3] s3cmci: port DMA code to dmaengine API
  • From: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
• [PATCH] mmc:sdhci:handle busy-end interrupt during command
  • From: Gwendal Grignou <gwendal@xxxxxxxxxxxx>
• Query regarding suspend/resume support in MMC
  • From: AYAN KUMAR HALDER <ayankumarh@xxxxxxxxx>
• Re: [PATCH 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH v3 2/3] mmc: omap_hsmmc: Pin remux workaround to support SDIO interrupt on AM335x.
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• Re: [PATCH 3/3] mmc: dw_mmc: Support voltage changes
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCHv2 1/5] mmc: dw_mmc: modify the dt-binding for removing slot-node and supports-highspeed
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCHv2 2/5] ARM: dts: exynos: unuse the slot-node and deprecated the supports-highspeed for dw-mmc
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCHv2 5/5] mmc: dw_mmc: replace "disable-wp" from slot's quirk to host's quirk
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCHv2 3/5] ARM: dts: socfpga: unuse the slot-node and deprecated the supports-highspeed for dw-mmc
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCHv2 0/5] ARM: remove the sub-node and deprecated supports-highspeed property for dwmmc.
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCHv2 4/5] ARM: dts: rockchip: unuse the slot-node and deprecated the supports-highspeed for dw-mmc
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH 0/4] ARM: remove the sub-node and deprecated supports-highspeed property.
  • From: Sachin Kamat <spk.linux@xxxxxxxxx>
• [PATCH resend v3 2/2] mmc: Add SDIO function devicetree subnode parsing
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH resend v3 1/2] dt: bindings: mmc: Add sdio function subnode documentation
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH resend v3 0/2] mmc: Add SDIO function devicetree subnode parsing
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 2/4] ARM: dts: exynos: unuse the slot-node and deprecated the supports-highspeed for dw-mmc
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCH 4/4] ARM: dts: rockchip: unuse the slot-node and deprecated the supports-highspeed for dw-mmc
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCH 3/4] ARM: dts: socfpga: unuse the slot-node and deprecated the supports-highspeed for dw-mmc
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCH 1/4] mmc: dw_mmc: modify the dt-binding for removing slot-node and supports-highspeed
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCH 0/4] ARM: remove the sub-node and deprecated supports-highspeed property.
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: mwifiex card reset
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [RFC PATCH v2 4/6] mmc: sdhci: host: add new f_sdh30
  • From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
• Re: mwifiex card reset
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• RE: [RFC PATCH 1/1 v7]mmc: Support-FFU-for-eMMC-v5.0
  • From: Avi Shchislowski <Avi.Shchislowski@xxxxxxxxxxx>
• Re: [RFC PATCH 1/1 v7]mmc: Support-FFU-for-eMMC-v5.0
  • From: Hsin-Hsiang Tseng <hsinhsiangtseng@xxxxxxxxx>
• No UHS support for O2 Micro, Inc. OZ600FJ0/OZ900FJ0/OZ600FJS?
  • From: Clemens Eisserer <linuxhippy@xxxxxxxxx>
• Re: mwifiex card reset
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: mwifiex card reset
  • From: James Cameron <quozl@xxxxxxxxxx>
• Re: [PATCH V2 3/3] mmc: mmci: Reverse IRQ handling for the arm_variant
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: [PATCH 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH V2 3/3] mmc: mmci: Reverse IRQ handling for the arm_variant
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH] mmc: add Toshiba PCI SD controller driver
  • From: Ondrej Zary <linux@xxxxxxxxxxxxxxxxxxxx>
• Re: [RFC PATCH 1/1 v7]mmc: Support-FFU-for-eMMC-v5.0
  • From: Grant Grundler <grundler@xxxxxxxxxxxx>
• mwifiex card reset
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• RE: [PATCH 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• RE: [PATCH 3/3] mmc: dw_mmc: Support voltage changes
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• Re: [RFC PATCH v2 6/6] mmc: core: add manual resume capability
  • From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
• Re: [PATCH 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators
  • From: Yuvaraj Kumar <yuvaraj.cd@xxxxxxxxx>
• Re: [RFC PATCH v2 4/6] mmc: sdhci: host: add new f_sdh30
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [RFC PATCH v2 6/6] mmc: core: add manual resume capability
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v2] mmc: Allow forward compatibility for e⋅MMC
  • From: Romain Izard <romain.izard.pro@xxxxxxxxx>
• Re: [PATCH 3/3] mmc: dw_mmc: Support voltage changes
  • From: Yuvaraj Kumar <yuvaraj.cd@xxxxxxxxx>
• Re: [RFC PATCH v2 4/6] mmc: sdhci: host: add new f_sdh30
  • From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
• Re: [RFC PATCH v2 6/6] mmc: core: add manual resume capability
  • From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
• [PATCH v5] mmc: sdhci: Replace host->mmc with mmc where possible
  • From: Markus Mayer <markus.mayer@xxxxxxxxxx>
• Re: [PATCH] tmio_mmc_pio: prevent endless loop in tmio_mmc_set_clock()
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• Re: Seeking correct git repo
  • From: Derek Simkowiak <derek@xxxxxxxxxxx>
• Re: [PATCH 3/3] mmc: dw_mmc: Support voltage changes
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• [PATCH] mmc: sdhci: avoid double-delay while transitioning to 1.8V
  • From: Russell King <rmk+kernel@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] mmc: dw_mmc: Support voltage changes
  • From: Yuvaraj Kumar <yuvaraj.cd@xxxxxxxxx>
• Re: [PATCH 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators
  • From: Yuvaraj Kumar <yuvaraj.cd@xxxxxxxxx>
• Re: [RFC PATCH v2 4/6] mmc: sdhci: host: add new f_sdh30
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [RFC PATCH v2 6/6] mmc: core: add manual resume capability
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• RE: [PATCH 3/3] mmc: dw_mmc: Support voltage changes
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• RE: [PATCH 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• Re: Seeking correct git repo
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [RFC PATCH v2 6/6] mmc: core: add manual resume capability
  • From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
• [RFC PATCH v2 5/6] mmc: core: hold SD Clock before CMD11 during Signal Voltage Switch Procedure
  • From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
• [RFC PATCH v2 4/6] mmc: sdhci: host: add new f_sdh30
  • From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
• [RFC PATCH v2 3/6] mmc: sdhci: add quirk for single block transactions
  • From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
• [RFC PATCH v2 2/6] mmc: sdhci: add quirk for tuning work around
  • From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
• [RFC PATCH v2 1/6] mmc: sdhci: add quirk for voltage switch callback
  • From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
• [RFC PATCH v2 0/6] mmc: sdhci: adding support for a new Fujitsu sdhci IP
  • From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
• Re: Seeking correct git repo
  • From: Hsin-Hsiang Tseng <hsinhsiangtseng@xxxxxxxxx>
• Seeking correct git repo
  • From: Derek Simkowiak <derek@xxxxxxxxxxx>
• Re: [PATCH 3/3] mmc: dw_mmc: Support voltage changes
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 1/1] mmc: host: Kconfig: Update SDHCI S3C entry
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 1/1] mmc: host: Kconfig: Update SDHCI S3C entry
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• RE: [PATCH 3/3] mmc: dw_mmc: Support voltage changes
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• RE: [PATCH 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• Re: [PATCH 1/1] mmc: host: Kconfig: Update SDHCI S3C entry
  • From: Sachin Kamat <spk.linux@xxxxxxxxx>
• RE: [PATCH] ARM: dts: update mmc node with hs-200 mode
  • From: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
• Re: [PATCH 1/1] mmc: host: Kconfig: Update SDHCI S3C entry
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 1/1] mmc: host: Kconfig: Update SDHCI S3C entry
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxxx>
• [PATCH] ARM: dts: update mmc node with hs-200 mode
  • From: Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxx>
• Re: [PATCH] mmc: sdhci: Improve external VDD regulator support
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH] mmc: sdhci: Improve external VDD regulator support
  • From: Tim Kryger <tim.kryger@xxxxxxxxx>
• Re: [PATCH 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCH 1/3] mmc: vub300: use request_firmware_direct() for pseudo code
  • From: "Luis R. Rodriguez" <mcgrof@xxxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] mmc: dw_mmc: Support voltage changes
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: [PATCH 2/3] mmc: dw_mmc: Dont cut off vqmmc and vmmc
  • From: Doug Anderson <dianders@xxxxxxxxxx>
• Re: [PATCH 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators
  • From: Doug Anderson <dianders@xxxxxxxxxxxx>
• Re: sdhci_s3c_consider_clock scheduling while atomic - clk_round_rate
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• [PATCH 1/6] mmc: sdhci-s3c: Fix local I/O clock gating
  • From: Tomasz Figa <t.figa@xxxxxxxxxxx>
• Re: MMC error on Exynos4210 board
  • From: Tim Kryger <tim.kryger@xxxxxxxxx>
• Re: MMC error on Exynos4210 board
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• sdhci_s3c_consider_clock scheduling while atomic - clk_round_rate
  • From: Daniel Drake <drake@xxxxxxxxxxxx>
• [PATCH v2] mmc: sdhci-pci: Add support for Intel Quark X1000 SDIO host controller
  • From: "Chen, Alvin" <alvin.chen@xxxxxxxxx>
• [PATCH v2] mmc: sdhci-pci: SDIO host controller support for Intel Quark X1000
  • From: "Chen, Alvin" <alvin.chen@xxxxxxxxx>
• Re: [PATCH] mmc-utils:add KSI eMMC 5.0 FFU support
  • From: Hsin-Hsiang Tseng <hsinhsiangtseng@xxxxxxxxx>
• Fwd: [RFC PATCH 1/1 v7]mmc: Support-FFU-for-eMMC-v5.0
  • From: Hsin-Hsiang Tseng <hsinhsiangtseng@xxxxxxxxx>
• Re: [PATCH] mmc: sdhci-pci: Quark SDIO host controller supporting
  • From: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
• Re: [PATCH] mmc-utils:add KSI eMMC 5.0 FFU support
  • From: Grant Grundler <grundler@xxxxxxxxxxxx>
• Re: [RFC PATCH 1/1 v7]mmc: Support-FFU-for-eMMC-v5.0
  • From: Grant Grundler <grundler@xxxxxxxxxxxx>
• Re: [PATCH v3] s3cmci: port DMA code to dmaengine API
  • From: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
• Re: [PATCH v3 10/10] MAINTAINERS: Add sdhci-st file to ARCH/STI architecture
  • From: Maxime Coquelin <maxime.coquelin@xxxxxx>
• Re: [PATCH v3 09/10] ARM: update multi_v7_defconfig for STI
  • From: Maxime Coquelin <maxime.coquelin@xxxxxx>
• [PATCH 3/3] mmc: dw_mmc: Support voltage changes
  • From: Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxx>
• [PATCH 2/3] mmc: dw_mmc: Dont cut off vqmmc and vmmc
  • From: Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxx>
• [PATCH 1/3] mmc: dw_mmc: use mmc_regulator_get_supply to handle regulators
  • From: Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxx>
• [PATCH 0/3] Adding UHS support for dw_mmc driver
  • From: Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxx>
• Re: [PATCH 2/2] mmc: rtsx: add support for async request
  • From: micky <micky_ching@xxxxxxxxxxxxxx>
• Re: MMC error on Exynos4210 board
  • From: Sachin Kamat <spk.linux@xxxxxxxxx>
• Re: [PATCH 5/5] ARM: dts: imx51-babbage: Fix esdhc setup
  • From: Shawn Guo <shawn.guo@xxxxxxxxxxxxx>
• Re: [PATCH] mmc: core: Add DT bindings for card detect debounce time
  • From: Alexandre Courbot <gnurou@xxxxxxxxx>
• Re: [RFC PATCH 1/7] mmc: sdhci: add quirk for broken 3.0V support
  • From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
• Re: MMC error on Exynos4210 board
  • From: Tim Kryger <tim.kryger@xxxxxxxxx>
• Re: [RFC PATCH 1/7] mmc: sdhci: add quirk for broken 3.0V support
  • From: Anton Vorontsov <anton@xxxxxxxxxx>
• Re: [RFC 1/2] pwrseq: Add subsystem to handle complex power sequences
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [patch] mmc: sdhci-bcm-kona: | vs & typo in debug code
  • From: Matt Porter <mporter@xxxxxxxxxx>
• Re: [RFC PATCH 5/7] mmc: sdhci: host: add new f_sdh30
  • From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
• Re: [RFC PATCH 5/7] mmc: sdhci: host: add new f_sdh30
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [RFC PATCH 7/7] mmc: core: add manual resume capability
  • From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
• [RFC PATCH 6/7] mmc: core: hold SD Clock before CMD11 during Signal Voltage Switch Procedure
  • From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
• [RFC PATCH 5/7] mmc: sdhci: host: add new f_sdh30
  • From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
• [RFC PATCH 4/7] mmc: sdhci: add quirk for single block transactions
  • From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
• [RFC PATCH 3/7] mmc: sdhci: add quirk for tuning work around
  • From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
• [RFC PATCH 2/7] mmc: sdhci: add quirk for voltage switch callback
  • From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
• [RFC PATCH 1/7] mmc: sdhci: add quirk for broken 3.0V support
  • From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
• [RFC PATCH 0/7] mmc: sdhci: adding support for a new Fujitsu sdhci IP
  • From: Vincent Yang <vincent.yang.fujitsu@xxxxxxxxx>
• [PATCH] mmc: sdhci-pci: Quark SDIO host controller supporting
  • From: "Chen, Alvin" <alvin.chen@xxxxxxxxx>
• [PATCH] mmc: sdhci-pci: Add support for Intel Quark SDIO host controller
  • From: "Chen, Alvin" <alvin.chen@xxxxxxxxx>
• Re: [RFC 1/2] pwrseq: Add subsystem to handle complex power sequences
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [RFC 1/2] pwrseq: Add subsystem to handle complex power sequences
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [RFC 1/2] pwrseq: Add subsystem to handle complex power sequences
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [patch] mmc: sdhci-bcm-kona: | vs & typo in debug code
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: MMC error on Exynos4210 board
  • From: Sachin Kamat <spk.linux@xxxxxxxxx>
• [PATCH] mmc: test: Fix potential __free_pages(NULL) in mmc_test
  • From: Chris Ball <chris@xxxxxxxxxx>
• Re: [RFC 1/2] pwrseq: Add subsystem to handle complex power sequences
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH 23/38] mmc: sdhci: convert sdhci_set_uhs_signaling() into a library function
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: [PATCH] brcmfmac: prevent watchdog from interfering with scanning and connecting
  • From: Arend van Spriel <arend@xxxxxxxxxxxx>
• Re: [PATCH] brcmfmac: prevent watchdog from interfering with scanning and connecting
  • From: "Fu, Zhonghui" <zhonghui.fu@xxxxxxxxxxxxxxx>
• Re: [PATCH 23/38] mmc: sdhci: convert sdhci_set_uhs_signaling() into a library function
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [RFC 1/2] pwrseq: Add subsystem to handle complex power sequences
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [RFC 1/2] pwrseq: Add subsystem to handle complex power sequences
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [RFC 0/2] pwrseq: Add subsystem for power sequences
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [RFC 1/2] pwrseq: Add subsystem to handle complex power sequences
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [RFC 2/2] mmc: core: Add support for power sequences
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: MMC error on Exynos4210 board
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH 23/38] mmc: sdhci: convert sdhci_set_uhs_signaling() into a library function
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: MMC error on Exynos4210 board
  • From: Sachin Kamat <spk.linux@xxxxxxxxx>
• Re: MMC error on Exynos4210 board
  • From: Tim Kryger <tim.kryger@xxxxxxxxx>
• Re: MMC error on Exynos4210 board
  • From: Sachin Kamat <spk.linux@xxxxxxxxx>
• Re: MMC error on Exynos4210 board
  • From: Tim Kryger <tim.kryger@xxxxxxxxx>
• Re: MMC error on Exynos4210 board
  • From: Sachin Kamat <spk.linux@xxxxxxxxx>
• Re: MMC regression with linux-next on Exynos5250
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH 2/2] mmc: rtsx: add support for async request
  • From: micky <micky_ching@xxxxxxxxxxxxxx>
• Re: MMC error on Exynos4210 board
  • From: Tim Kryger <tim.kryger@xxxxxxxxx>
• Re: [PATCH] mmc: core: Add DT bindings for card detect debounce time
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] mmc: core: Add DT bindings for card detect debounce time
  • From: Balaji T K <balajitk@xxxxxx>
• MMC error on Exynos4210 board
  • From: Sachin Kamat <spk.linux@xxxxxxxxx>
• Re: [PATCH] mmc: Do not advertise secure discard if it is blacklisted
  • From: Lukáš Czerner <lczerner@xxxxxxxxxx>
• Re: MMC regression with linux-next on Exynos5250
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxxx>
• [PATCH] mmc: Do not advertise secure discard if it is blacklisted
  • From: Lukas Czerner <lczerner@xxxxxxxxxx>
• Re: MMC regression with linux-next on Exynos5250
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: MMC regression with linux-next on Exynos5250
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxxx>
• Re: [PATCH 2/2] mmc: rtsx: add support for async request
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: MMC regression with linux-next on Exynos5250
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• MMC regression with linux-next on Exynos5250
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxxx>
• Re: [PATCH 2/2] mmc: rtsx: add support for async request
  • From: micky <micky_ching@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] mfd: rtsx: add dma transfer function
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 2/2] mmc: rtsx: add support for async request
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH] mmc: sdhci: Remove blank line
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 2/2] mmc: rtsx: add support for async request
  • From: micky <micky_ching@xxxxxxxxxxxxxx>
• Re: [PATCH 23/38] mmc: sdhci: convert sdhci_set_uhs_signaling() into a library function
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mmc-utils:add KSI eMMC 5.0 FFU support
  • From: Puthikorn Voravootivat <puthik@xxxxxxxxxxxx>
• Re: [PATCH V2 3/3] mmc: mmci: Reverse IRQ handling for the arm_variant
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: [PATCH] ARM: bcm_defconfig: re-enable BCM Kona SDHCI driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH] mmc: mxs-mmc: Introducing regulator support.
  • From: Robin van der Gracht <robin@xxxxxxxxxxx>
• Re: [PATCH 2/2] mmc: rtsx: add support for async request
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH V2 3/3] mmc: mmci: Reverse IRQ handling for the arm_variant
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] ARM: multi_v7_defconfig: re-enable SDHCI drivers
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: [PATCH 1/2] mfd: rtsx: add dma transfer function
  • From: micky <micky_ching@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] mmc: rtsx: add support for async request
  • From: micky <micky_ching@xxxxxxxxxxxxxx>
• Re: [PATCH v2] mmc: Add hardware dependencies for sdhci-pxav3 and sdhci-pxav2
  • From: Haojian Zhuang <haojian.zhuang@xxxxxxxxx>
• Re: [PATCH V2 3/3] mmc: mmci: Reverse IRQ handling for the arm_variant
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: [PATCH V2 3/3] mmc: mmci: Reverse IRQ handling for the arm_variant
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• Re: [PATCH] ARM: bcm_defconfig: re-enable BCM Kona SDHCI driver
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH] ARM: bcm_defconfig: re-enable BCM Kona SDHCI driver
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] ARM: bcm_defconfig: re-enable BCM Kona SDHCI driver
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH V2 3/3] mmc: mmci: Reverse IRQ handling for the arm_variant
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] ARM: multi_v7_defconfig: re-enable SDHCI drivers
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] ARM: bcm_defconfig: re-enable BCM Kona SDHCI driver
  • From: Alex Elder <elder@xxxxxxxx>
• Re: [PATCH V2 3/3] mmc: mmci: Reverse IRQ handling for the arm_variant
  • From: John Stultz <john.stultz@xxxxxxxxxx>
• [PATCH] ARM: bcm_defconfig: re-enable BCM Kona SDHCI driver
  • From: Matt Porter <mporter@xxxxxxxxxx>
• Re: [PATCH] ARM: multi_v7_defconfig: re-enable SDHCI drivers
  • From: Matt Porter <mporter@xxxxxxxxxx>
• Re: [PATCH v4 2/2] mmc: sdhci: Replace host->mmc with mmc where possible
  • From: Markus Mayer <markus.mayer@xxxxxxxxxx>
• [PATCH] ARM: multi_v7_defconfig: re-enable SDHCI drivers
  • From: Stephen Warren <swarren@xxxxxxxxxxxxx>
• Re: [PATCH 23/38] mmc: sdhci: convert sdhci_set_uhs_signaling() into a library function
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 1/2] mfd: rtsx: add dma transfer function
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] mmc: core: Fix DT documentation of eMMC high-speed DDR 1.8/1.2V bindings.
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: how to creat watchpoint in kernel for data access debug
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: [PATCH 2/2] mmc: rtsx: add support for async request
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 1/2] mfd: rtsx: add dma transfer function
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• [PATCH v2] mmc: Add hardware dependencies for sdhci-pxav3 and sdhci-pxav2
  • From: Jean Delvare <jdelvare@xxxxxxx>
• Re: [PATCH 23/38] mmc: sdhci: convert sdhci_set_uhs_signaling() into a library function
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [RESEND][PATCH] mmc: wmt-sdmmc: Remove deprecated IRQF_DISABLED
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [RESEND][PATCH] mmc: wmt-sdmmc: Fix settting BM_EIGHTBIT_MODE bit in wmt_mci_set_ios()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] mmc: implement driver stage register handling
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mmc: implement driver stage register handling
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 23/38] mmc: sdhci: convert sdhci_set_uhs_signaling() into a library function
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH] mmc: sd: warn if card stays busy during init
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] mmc: add new au6601 driver
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 1/1] mmc: moxart: Remove unneeded version.h inclusion
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v14 0/6] mmc: omap_hsmmc: Enable SDIO IRQ
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [RFC][PATCH] Fix for Intel Baytrail-T errata regarding the non-functioning mmc_pwr pin
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 2/2] mmc: rtsx: add support for async request
  • From: micky <micky_ching@xxxxxxxxxxxxxx>
• Re: [PATCH 1/1] mmc: quirks: Fixup debug message
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 2/2] mmc: rtsx: add support for async request
  • From: Arend van Spriel <arend@xxxxxxxxxxxx>
• Re: resend - sh mmcif driver cleanup patch series
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] mmc: sdhci: Remove unused ret variables
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 2/2] mmc: rtsx: add support for async request
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCHv7 1/2] mmc: dw_mmc: replace "disable-wp" from slot's quirk to host's quirk
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v4 2/2] mmc: sdhci: Replace host->mmc with mmc where possible
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v4 1/2] mmc: sdhci: Use mmc core regulator infrastucture
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] brcmfmac: prevent watchdog from interfering with scanning and connecting
  • From: Arend van Spriel <arend@xxxxxxxxxxxx>
• [PATCH V2 3/3] mmc: mmci: Reverse IRQ handling for the arm_variant
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 3/3] mmc: mmci: Reverse IRQ handling for the arm_variant
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH 3/3] mmc: mmci: Reverse IRQ handling for the arm_variant
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH 2/3] mmc: mmci: Move all CMD irq handling to mmci_cmd_irq()
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH 1/3] mmc: mmci: Remove redundant check of status for DATA irq
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH 0/3] mmc: mmci: Restore irq handling behavior for arm_variant
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCHv7 2/2] ARM: dts: unuse the slot-node and deprecated supports-highspeed for dw-mmc.
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCHv7 2/2] ARM: dts: unuse the slot-node and deprecated supports-highspeed for dw-mmc.
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH -next 00/26] treewide: Use dma_zalloc_coherent
  • From: Joe Perches <joe@xxxxxxxxxxx>
• [PATCH -next 09/26] mmc: Use dma_zalloc_coherent
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] mmc: Add APM X-Gene SoC SDHC controller support to Arasan SDHCI driver
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH v4 0/2] mmc: sdhci: Use mmc core regulator infrastucture
  • From: Markus Mayer <markus.mayer@xxxxxxxxxx>
• [PATCH v4 1/2] mmc: sdhci: Use mmc core regulator infrastucture
  • From: Markus Mayer <markus.mayer@xxxxxxxxxx>
• [PATCH v4 2/2] mmc: sdhci: Replace host->mmc with mmc where possible
  • From: Markus Mayer <markus.mayer@xxxxxxxxxx>
• Re: [PATCH v2 1/2] mmc: sdhci: add init_card callback
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• Re: [PATCHv7 2/2] ARM: dts: unuse the slot-node and deprecated supports-highspeed for dw-mmc.
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2 1/2] mmc: sdhci: add init_card callback
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v3 0/3] mmc: sdhci: Use mmc core regulator infrastucture
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v2 1/2] mmc: sdhci: add init_card callback
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCH v2 2/2] mmc: sdhci-esdhc-imx: add callback for card_type inits
  • From: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
• [PATCHv7 2/2] ARM: dts: unuse the slot-node and deprecated supports-highspeed for dw-mmc.
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCHv7 0/2] mmc: fixed the mmc_of_parse for dwmmc
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCHv7 1/2] mmc: dw_mmc: replace "disable-wp" from slot's quirk to host's quirk
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCH v3 1/3] mmc: sdhci: Use mmc core regulator infrastucture
  • From: Markus Mayer <markus.mayer@xxxxxxxxxx>
• [PATCH v3 3/3] mmc: sdhci: Replace host->mmc with mmc where possible
  • From: Markus Mayer <markus.mayer@xxxxxxxxxx>
• [PATCH v3 2/3] mmc: sdhci: Use existing mmc pointer calling mmc_regulator_set_ocr()
  • From: Markus Mayer <markus.mayer@xxxxxxxxxx>
• [PATCH v3 0/3] mmc: sdhci: Use mmc core regulator infrastucture
  • From: Markus Mayer <markus.mayer@xxxxxxxxxx>
• Re: [PATCH] mmc: usdhi6rol0: fix compiler warnings
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [GIT PULL] MMC updates for 3.16-rc1
  • From: Chris Ball <chris@xxxxxxxxxx>
• Re: [PATCH] mmc: usdhi6rol0: fix compiler warnings
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• [GIT PULL] MMC fixes for v.3.16
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 0/4] randconfig fixes for mmc
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] mmc: usdhi6rol0: fix compiler warnings
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH] mmc: atmel-mci: add 0x600 IP version
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• Re: [GIT PULL] MMC updates for 3.16-rc1
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [GIT PULL] MMC updates for 3.16-rc1
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [GIT PULL] MMC updates for 3.16-rc1
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [GIT PULL] MMC updates for 3.16-rc1
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4] mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller
  • From: Chris Ball <chris@xxxxxxxxxx>
• [PATCH] mmc: usdhi6rol0: fix compiler warnings
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [PATCH v4] mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [PATCH v4] mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller
  • From: Chris Ball <chris@xxxxxxxxxx>
• Re: [PATCH v6 00/12] Qualcomm SD Card Controller support
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v6 00/12] Qualcomm SD Card Controller support
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v6 12/12] mmc: mmci: Add Qualcomm Id to amba id table
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 11/12] mmc: mmci: Add Qcom specific rx_fifocnt logic.
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 10/12] mmc: mmci: add explicit clk control
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 09/12] mmc: mmci: add f_max to variant structure
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 03/12] mmc: mmci: Add enough delay between writes to CMD register.
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v6 02/12] mmc: mmci: Add Qualcomm specific register defines.
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 04/11] pinctrl: sunxi: Properly handle level triggered gpio interrupts
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 04/11] pinctrl: sunxi: Properly handle level triggered gpio interrupts
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCHv6 2/2] ARM: dts: unuse the slot-node and deprecated supports-highspeed for dw-mmc.
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [GIT PULL] MMC updates for 3.16-rc1
  • From: Mike Turquette <mturquette@xxxxxxxxxx>
• Re: [GIT PULL] MMC updates for 3.16-rc1
  • From: Linus Torvalds <torvalds@xxxxxxxxxxxxxxxxxxxx>
• [GIT PULL] MMC updates for 3.16-rc1
  • From: Chris Ball <chris@xxxxxxxxxx>
• Re: [PATCH] mmc: sdhci-msm: Fix fallout from sdhci refactoring
  • From: Kumar Gala <galak@xxxxxxxxxxxxxx>
• [PATCH] mmc: sdhci-msm: Fix crash due to missing ops functions
  • From: Kumar Gala <galak@xxxxxxxxxxxxxx>
• [PATCH] mmc: mxs: fix card detection in case of 'broken-cd' flag set
  • From: Roman Pen <r.peniaev@xxxxxxxxx>
• Re: [PATCH 5/5] ARM: dts: imx51-babbage: Fix esdhc setup
  • From: Lothar Waßmann <LW@xxxxxxxxxxxxxxxxxxx>
• [PATCH] mmc: dw_mmc: change to use recommended reset procedure
  • From: Sonny Rao <sonnyrao@xxxxxxxxxxxx>
• Re: [PATCH] mmc: dw_mmc: change to use recommended reset procedure
  • From: Sonny Rao <sonnyrao@xxxxxxxxxxxx>
• [PATCH] mmc: pxamci: prepare and unprepare the clocks
  • From: Robert Jarzmik <robert.jarzmik@xxxxxxx>
• Re: [PATCHv6 2/2] ARM: dts: unuse the slot-node and deprecated supports-highspeed for dw-mmc.
  • From: Dinh Nguyen <dinguyen@xxxxxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 5/5] ARM: dts: imx51-babbage: Fix esdhc setup
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [PATCH 5/5] ARM: dts: imx51-babbage: Fix esdhc setup
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• [PATCHv6 2/2] ARM: dts: unuse the slot-node and deprecated supports-highspeed for dw-mmc.
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCHv6 1/2] mmc: dw_mmc: replace "disable-wp" from slot's quirk to host's quirk
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCHv6 0/2] mmc: fixed the mmc_of_parse for dwmmc
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCH 1/1] drivers/mmc/host/dw_mmc.c: use ARRAY_SIZE instead of sizeof/sizeof[0]
  • From: Fabian Frederick <fabf@xxxxxxxxx>
• Re: autosleep suspend too frquent problem
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH 1/2] mfd: rtsx: add dma transfer function
  • From: <micky_ching@xxxxxxxxxxxxxx>
• [PATCH 2/2] mmc: rtsx: add support for async request
  • From: <micky_ching@xxxxxxxxxxxxxx>
• [PATCH 0/2] mmc: rtsx: add support for async request
  • From: <micky_ching@xxxxxxxxxxxxxx>
• Re: [PATCH 1/4] mmc: atmel-mci: incude asm/cacheclush.h
  • From: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
• RE: autosleep suspend too frquent problem
  • From: "Wang, Yalin" <Yalin.Wang@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] mmc: mvsdio: avoid compiler warning
  • From: Nicolas Pitre <nicolas.pitre@xxxxxxxxxx>
• [PATCH v2 1/3] mmc: sdhci: Use mmc core regulator infrastucture
  • From: Markus Mayer <markus.mayer@xxxxxxxxxx>
• [PATCH v2 3/3] mmc: sdhci: Replace host->mmc with mmc where possible
  • From: Markus Mayer <markus.mayer@xxxxxxxxxx>
• [PATCH v2 2/3] mmc: sdhci: Use existing mmc pointer calling mmc_regulator_set_ocr()
  • From: Markus Mayer <markus.mayer@xxxxxxxxxx>
• [PATCH v2 0/3] mmc: sdhci: Use mmc core regulator infrastucture
  • From: Markus Mayer <markus.mayer@xxxxxxxxxx>
• [PATCH 0/4] randconfig fixes for mmc
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 3/4] mmc: omap: don't select TPS65010
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 2/4] mmc: mvsdio: avoid compiler warning
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 1/4] mmc: atmel-mci: incude asm/cacheclush.h
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• [PATCH 4/4] mmc: simplify SDHCI Kconfig dependencies
  • From: Arnd Bergmann <arnd@xxxxxxxx>
• Re: linux-next: Tree for Jun 5 (mmc/host/usdhi6ro10.c)
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v3 10/10] MAINTAINERS: Add sdhci-st file to ARCH/STI architecture
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: autosleep suspend too frquent problem
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v3 09/10] ARM: update multi_v7_defconfig for STI
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCH 5/5] ARM: dts: imx51-babbage: Fix esdhc setup
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCHv5 2/2] ARM: dts: unuse the slot-node and deprecated supports-highspeed for dw-mmc.
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCHv5 2/2] ARM: dts: unuse the slot-node and deprecated supports-highspeed for dw-mmc.
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH v2 2/3] mmc: Add APM X-Gene SoC SDHC controller support to Arasan SDHCI driver
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCHv5 2/2] ARM: dts: unuse the slot-node and deprecated supports-highspeed for dw-mmc.
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• RE: autosleep suspend too frquent problem
  • From: "Wang, Yalin" <Yalin.Wang@xxxxxxxxxxxxxx>
• Re: [PATCHv5 2/2] ARM: dts: unuse the slot-node and deprecated supports-highspeed for dw-mmc.
  • From: Tushar Behera <trblinux@xxxxxxxxx>
• [PATCHv5 2/2] ARM: dts: unuse the slot-node and deprecated supports-highspeed for dw-mmc.
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCHv5 0/2] mmc: fixed the mmc_of_parse for dwmmc
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCHv5 1/2] mmc: dw_mmc: replace "disable-wp" from slot's quirk to host's quirk
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCHv4 2/2] ARM: dts: unuse the slot-node and deprecated support-highspeed for dw-mmc.
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• RE: how to creat watchpoint in kernel for data access debug
  • From: "Wang, Yalin" <Yalin.Wang@xxxxxxxxxxxxxx>
• Re: [PATCHv4 2/2] ARM: dts: unuse the slot-node and deprecated support-highspeed for dw-mmc.
  • From: Tushar Behera <trblinux@xxxxxxxxx>
• [PATCHv4 1/2] mmc: dw_mmc: replace "disable-wp" from slot's quirk to host's quirk
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCHv4 2/2] ARM: dts: unuse the slot-node and deprecated support-highspeed for dw-mmc.
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCHv4 0/4] mmc: fixed the mmc_of_parse for dwmmc
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH] mmc: sdhci-s3c: Remove use of card_tasklet, which no longer exists
  • From: Chris Ball <chris@xxxxxxxxxx>
• Re: [PATCH v2 2/3] mmc: Add APM X-Gene SoC SDHC controller support to Arasan SDHCI driver
  • From: Loc Ho <lho@xxxxxxx>
• Re: [PATCH] mmc: sdhci-s3c: Remove use of card_tasklet, which no longer exists
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCH] mmc: sdhci-s3c: Remove use of card_tasklet, which no longer exists
  • From: Chris Ball <chris@xxxxxxxxxx>
• Re: how to creat watchpoint in kernel for data access debug
  • From: Will Deacon <will.deacon@xxxxxxx>
• [PATCH v3 01/10] mmc: sdhci-st: Intial support for ST SDHCI controller
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 02/10] mmc: sdhci-st: ST Microelectronics SDHCI binding documentation.
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 03/10] ARM: STi: DT: Add sdhci pins for stih416
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 04/10] ARM: STi: DT: Add sdhci controller for stih416
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 05/10] ARM: STi: DT: Add sdhci pin configuration for stih415
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 06/10] ARM: STi: DT: Add sdhci controller for stih415
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 07/10] ARM: STi: DT: Enable mmc0 for both stih415 and stih416 SoCs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 08/10] ARM: STi: DT: Enable second sdhci controller for stih416 b2020 boards.
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 09/10] ARM: update multi_v7_defconfig for STI
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 10/10] MAINTAINERS: Add sdhci-st file to ARCH/STI architecture
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v3 00/10] Add SDHCI support for ST Microelectronics SoCs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 08/10] ARM: STi: DT: Enable second sdhci controller for stih416 b2020 boards.
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 10/10] MAINTAINERS: Add sdhci-st file to ARCH/STI architecture
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 09/10] ARM: update multi_v7_defconfig for STI
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 06/10] ARM: STi: DT: Add sdhci controller for stih415
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 04/10] ARM: STi: DT: Add sdhci controller for stih416
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 05/10] ARM: STi: DT: Add sdhci pin configuration for stih415
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 07/10] ARM: STi: DT: Enable mmc0 for both stih415 and stih416 SoCs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 02/10] mmc: sdhci-st: ST Microelectronics SDHCI binding documentation.
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 03/10] ARM: STi: DT: Add sdhci pins for stih416
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 01/10] mmc: sdhci-st: Intial support for ST SDHCI controller
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v2 00/10] Add SDHCI support for STMicroelectronics SoCs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH] mmc: sdhci: Remove unused ret variables
  • From: Markus Pargmann <mpa@xxxxxxxxxxxxxx>
• Re: [PATCH 6/6] mmc: sh-mmcif: final error path cleanup
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 5/6] mmc: sh-mmcif: no need to call pm_runtime_suspend on error
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 4/6] mmc: sh-mmcif: use devm_ for irq management
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 3/6] mmc: sh-mmcif: use devm_ for clock management
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 2/6] mmc: sh-mmcif: use devm_ for ioremap
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 1/6] mmc: sh-mmcif: update to print version and bus clock rate on probe
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• RE: [linux-sunxi] [PATCH v2 1/4] dt: bindings: mmc: Document the practice of using subnodes for slots
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• [PATCH 1/6] mmc: sh-mmcif: update to print version and bus clock rate on probe
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH 6/6] mmc: sh-mmcif: final error path cleanup
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH 4/6] mmc: sh-mmcif: use devm_ for irq management
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH 5/6] mmc: sh-mmcif: no need to call pm_runtime_suspend on error
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH 3/6] mmc: sh-mmcif: use devm_ for clock management
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• [PATCH 2/6] mmc: sh-mmcif: use devm_ for ioremap
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• resend - sh mmcif driver cleanup patch series
  • From: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/8] mmc: sdhci-st: Intial support for ST SDHCI controller
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 1/8] mmc: sdhci-st: Intial support for ST SDHCI controller
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH 1/8] mmc: sdhci-st: Intial support for ST SDHCI controller
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH v3] mmc: sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v2 2/3] mmc: Add APM X-Gene SoC SDHC controller support to Arasan SDHCI driver
  • From: Michal Simek <michal.simek@xxxxxxxxxx>
• Re: [PATCH v2 0/3] mmc: Add APM X-Gene SoC SDHC controller support to Arasan SDHCI driver
  • From: Michal Simek <monstr@xxxxxxxxx>
• RE: how to creat watchpoint in kernel for data access debug
  • From: "Wang, Yalin" <Yalin.Wang@xxxxxxxxxxxxxx>
• RE: [PATCH v3] mmc: sdhci-pci-o2micro: Add SeaBird SeaEagle SD3 support
  • From: Peter Guo <peter.guo@xxxxxxxxxxxxxx>
• Re: autosleep suspend too frquent problem
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v2 3/3] arm64: Add APM X-Gene SoC SDHC controller DTS entry
  • From: Loc Ho <lho@xxxxxxx>
• [PATCH v2 2/3] mmc: Add APM X-Gene SoC SDHC controller support to Arasan SDHCI driver
  • From: Loc Ho <lho@xxxxxxx>
• [PATCH v2 1/3] Documentation: Update Arasan SDHC documentation for the APM X-Gene SoC SDHC DTS binding
  • From: Loc Ho <lho@xxxxxxx>
• [PATCH v2 0/3] mmc: Add APM X-Gene SoC SDHC controller support to Arasan SDHCI driver
  • From: Loc Ho <lho@xxxxxxx>
• Re: how to creat watchpoint in kernel for data access debug
  • From: Will Deacon <will.deacon@xxxxxxx>
• Re: lockdep dump on devtree_lock (involving esdhc)
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: lockdep dump on devtree_lock (involving esdhc)
  • From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
• Re: lockdep dump on devtree_lock (involving esdhc)
  • From: Grant Likely <grant.likely@xxxxxxxxxxxx>
• Re: [PATCHv3 3/4] mmc: dw_mmc: remove the "supports-highspeed" property.
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• [PATCH v3 1/2] dt: bindings: mmc: Add sdio function subnode documentation
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 0/2] mmc: Add SDIO function devicetree subnode parsing
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v3 2/2] mmc: Add SDIO function devicetree subnode parsing
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 1/1] mmc: quirks: Fixup debug message
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxxxxxxxx>
• Re: [GIT PULL] MMC for v.3.16
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [linux-sunxi] [PATCH v2 1/4] dt: bindings: mmc: Document the practice of using subnodes for slots
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [linux-sunxi] [PATCH v2 1/4] dt: bindings: mmc: Document the practice of using subnodes for slots
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH v4] mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller
  • From: Chris Ball <chris@xxxxxxxxxx>
• Re: [linux-sunxi] [PATCH v2 1/4] dt: bindings: mmc: Document the practice of using subnodes for slots
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [RFC][PATCH] Fix for Intel Baytrail-T errata regarding the non-functioning mmc_pwr pin
  • From: Jon Pry <jonpry@xxxxxxxxx>
• Re: [PATCH v14 6/6] mmc: omap_hsmmc: Pin remux workaround to support SDIO interrupt on AM335x
  • From: Tony Lindgren <tony@xxxxxxxxxxx>
• Re: [GIT PULL] MMC for v.3.16
  • From: Ben Dooks <ben@xxxxxxxxxxxxxxxxx>
• Re: Add SDHCI support for STMicroelectronics SoCs
  • From: Lee Jones <lee.jones@xxxxxxxxxx>
• Re: [PATCHv3 4/4] ARM: dts: replace the slot property into slot sub-node for dwmmc.
  • From: Dinh Nguyen <dinh.linux@xxxxxxxxx>
• [GIT PULL] MMC for v.3.16
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 1/8] mmc: sdhci-st: Intial support for ST SDHCI controller
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• Re: [PATCH 03/11] pinctrl: sunxi: Move setting of mux to irq type from unmask to set_type
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: Add SDHCI support for STMicroelectronics SoCs
  • From: Peter Griffin <peter.griffin@xxxxxxxxxx>
• [PATCH v6 02/12] mmc: mmci: Add Qualcomm specific register defines.
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v6 03/12] mmc: mmci: Add enough delay between writes to CMD register.
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v6 04/12] mmc: mmci: Add Qcom datactrl register variant
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v6 05/12] mmc: mmci: add ddrmode mask to variant data
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v6 06/12] mmc: mmci: add 8bit bus support in variant data
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v6 10/12] mmc: mmci: add explicit clk control
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v6 11/12] mmc: mmci: Add Qcom specific rx_fifocnt logic.
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v6 12/12] mmc: mmci: Add Qualcomm Id to amba id table
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v6 09/12] mmc: mmci: add f_max to variant structure
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v6 08/12] mmc: mmci: Add support to data commands via variant structure.
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v6 07/12] mmc: mmci: add edge support to data and command out in variant data.
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v6 01/12] mmc: mmci: use NSEC_PER_SEC macro
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v6 00/12] Qualcomm SD Card Controller support
  • From: srinivas.kandagatla@xxxxxxxxxx
• Re: [PATCH] mmc: sdhci-s3c: use mmc_of_parse and remove the card_tasklet
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [linux-sunxi] [PATCH v2 1/4] dt: bindings: mmc: Document the practice of using subnodes for slots
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [linux-sunxi] [PATCH v2 1/4] dt: bindings: mmc: Document the practice of using subnodes for slots
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [linux-sunxi] [PATCH v2 1/4] dt: bindings: mmc: Document the practice of using subnodes for slots
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [linux-sunxi] [PATCH v2 1/4] dt: bindings: mmc: Document the practice of using subnodes for slots
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [linux-sunxi] [PATCH v2 1/4] dt: bindings: mmc: Document the practice of using subnodes for slots
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [linux-sunxi] [PATCH v2 1/4] dt: bindings: mmc: Document the practice of using subnodes for slots
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v5 02/13] mmc: mmci: convert register bits to use BIT() macro.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [linux-sunxi] [PATCH v2 1/4] dt: bindings: mmc: Document the practice of using subnodes for slots
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH 1/5] mmc: sdhci-esdhc-imx: add f_max field to private data
  • From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
• Re: [PATCH v5 11/13] mmc: mmci: add explicit clk control
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v3] s3cmci: port DMA code to dmaengine API
  • From: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
• Re: [PATCH 5/5] ARM: dts: imx51-babbage: Fix esdhc setup
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [linux-sunxi] [PATCH v2 1/4] dt: bindings: mmc: Document the practice of using subnodes for slots
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 1/5] mmc: sdhci-esdhc-imx: add f_max field to private data
  • From: Shawn Guo <shawn.guo@xxxxxxxxxx>
• Re: [linux-sunxi] [PATCH v2 1/4] dt: bindings: mmc: Document the practice of using subnodes for slots
  • From: Olof Johansson <olof@xxxxxxxxx>
• [PATCH v2 0/4] mmc: Add SDIO function devicetree subnode parsing
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 4/4] mmc: Add SDIO function devicetree subnode parsing
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 2/4] dt: bindings: mmc: Add sdio function subnode documentation
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 3/4] mmc: Set slot_no on devicetree / of systems too
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 1/4] dt: bindings: mmc: Document the practice of using subnodes for slots
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v4] mmc: add a driver for the Renesas usdhi6rol0 SD/SDIO host controller
  • From: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
• Re: [PATCH v5 02/13] mmc: mmci: convert register bits to use BIT() macro.
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH v5 11/13] mmc: mmci: add explicit clk control
  • From: Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>
• Re: [PATCH 03/11] pinctrl: sunxi: Move setting of mux to irq type from unmask to set_type
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCHv3 4/4] ARM: dts: replace the slot property into slot sub-node for dwmmc.
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• [PATCH v5 01/13] mmc: mmci: use NSEC_PER_SEC macro
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v5 02/13] mmc: mmci: convert register bits to use BIT() macro.
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v5 03/13] mmc: mmci: Add Qualcomm specific register defines.
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v5 04/13] mmc: mmci: Add enough delay between writes to CMD register.
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v5 05/13] mmc: mmci: Add Qcom datactrl register variant
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v5 06/13] mmc: mmci: add ddrmode mask to variant data
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v5 08/13] mmc: mmci: add edge support to data and command out in variant data.
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v5 09/13] mmc: mmci: Add support to data commands via variant structure.
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v5 11/13] mmc: mmci: add explicit clk control
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v5 12/13] mmc: mmci: Add Qcom specific rx_fifocnt logic.
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v5 13/13] mmc: mmci: Add Qualcomm Id to amba id table
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v5 10/13] mmc: mmci: add f_max to variant structure
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v5 07/13] mmc: mmci: add 8bit bus support in variant data
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v5 00/13] Add Qualcomm SD Card Controller support
  • From: srinivas.kandagatla@xxxxxxxxxx
• Re: [PATCH v4 13/13] mmc: mmci: Add Qcom specific pio_read function.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 1/3] mmc: block: add block number limitation flag for lultiple block read
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH 1/3] mmc: block: add block number limitation flag for lultiple block read
  • From: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
• RE: [PATCHv3 4/4] ARM: dts: replace the slot property into slot sub-node for dwmmc.
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• RE: [PATCHv3 3/4] mmc: dw_mmc: remove the "supports-highspeed" property.
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• RE: [PATCHv3 2/4] mmc: dw_mmc: use the __mmc_of_parse to parse the slot node
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• RE: [PATCHv3 3/4] mmc: dw_mmc: remove the "supports-highspeed" property.
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• Re: [PATCH 1/3] mmc: block: add block number limitation flag for lultiple block read
  • From: Ben Dooks <ben@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 13/13] mmc: mmci: Add Qcom specific pio_read function.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v4 13/13] mmc: mmci: Add Qcom specific pio_read function.
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 1/3] mmc: block: add block number limitation flag for lultiple block read
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxx>
• Re: [PATCH 1/3] mmc: block: add block number limitation flag for lultiple block read
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH 3/3] mmc: tmio: care about DMA tx/rx addr offset
  • From: Ben Dooks <ben@xxxxxxxxxxxxxxxxx>
• [PATCH 3/3] mmc: tmio: care about DMA tx/rx addr offset
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 2/3] mmc: sdhi: tidyup mmc_data setting for R-Car SDHI
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 1/3] mmc: block: add block number limitation flag for lultiple block read
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• [PATCH 0/3] mmc:
  • From: Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
• Re: [PATCH v4 12/13] mmc: mmci: add explicit clk control
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v4 11/13] mmc: mmci: add f_max to variant structure
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v4 11/13] mmc: mmci: add f_max to variant structure
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v4 12/13] mmc: mmci: add explicit clk control
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v4 09/13] mmc: mmci: add Qcom specifics of clk and datactrl registers.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v4 09/13] mmc: mmci: add Qcom specifics of clk and datactrl registers.
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v4 06/13] mmc: mmci: add ddrmode mask to variant data
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v4 03/13] mmc: mmci: Add Qualcomm Id to amba id table
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v4 03/13] mmc: mmci: Add Qualcomm Id to amba id table
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v4 06/13] mmc: mmci: add ddrmode mask to variant data
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v3 13/13] mmc: mmci: Add Qcom specific pio_read function.
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCHv3 3/4] mmc: dw_mmc: remove the "supports-highspeed" property.
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCHv3 3/4] mmc: dw_mmc: remove the "supports-highspeed" property.
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH] mmc: sdhci-s3c: call sdhci_card_event() instead of card tasklet
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH] mmc: sdhci-s3c: call sdhci_card_event() instead of card tasklet
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCH] mmc: sdhci-s3c: call sdhci_card_event() instead of card tasklet
  • From: Jingoo Han <jg1.han@xxxxxxxxxxx>
• Re: [PATCH v3 13/13] mmc: mmci: Add Qcom specific pio_read function.
  • From: Stephen Boyd <sboyd@xxxxxxxxxxxxxx>
• Re: [PATCH 1/3] Documentation: Update Arasan SDHC documentation for the APM X-Gene SoC SDHC DTS binding
  • From: Loc Ho <lho@xxxxxxx>
• Re: [PATCH 2/3] mmc: Add APM X-Gene SoC SDHC controller support to Arasan SDHCI driver
  • From: Loc Ho <lho@xxxxxxx>
• Re: [PATCH v14 6/6] mmc: omap_hsmmc: Pin remux workaround to support SDIO interrupt on AM335x
  • From: Balaji T K <balajitk@xxxxxx>
• Re: [PATCH v14 2/6] mmc: omap_hsmmc: Extend debugfs by SDIO IRQ handling, runtime state
  • From: Balaji T K <balajitk@xxxxxx>
• [PATCH v14 6/6] mmc: omap_hsmmc: Pin remux workaround to support SDIO interrupt on AM335x
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH v14 5/6] mmc: omap_hsmmc: switch default/idle pinctrl states in runtime hooks
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH v14 4/6] mmc: omap_hsmmc: abort runtime suspend if pending sdio irq detected
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH v14 3/6] mmc: omap_hsmmc: enable wakeup event for sdio OMAP4
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH v14 2/6] mmc: omap_hsmmc: Extend debugfs by SDIO IRQ handling, runtime state
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH v14 1/6] mmc: omap_hsmmc: Enable SDIO interrupt
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• [PATCH v14 0/6] mmc: omap_hsmmc: Enable SDIO IRQ
  • From: Andreas Fenkart <afenkart@xxxxxxxxx>
• Re: [PATCH v3 13/13] mmc: mmci: Add Qcom specific pio_read function.
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] mmc: dw_mmc: change to use recommended reset procedure
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCH] mmc: dw_mmc: change to use recommended reset procedure
  • From: Sonny Rao <sonnyrao@xxxxxxxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH v3 13/13] mmc: mmci: Add Qcom specific pio_read function.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCH v4 02/13] mmc: mmci: convert register bits to use BIT() macro.
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v4 03/13] mmc: mmci: Add Qualcomm Id to amba id table
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v4 07/13] mmc: mmci: add 8bit bus support in variant data
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v4 09/13] mmc: mmci: add Qcom specifics of clk and datactrl registers.
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v4 10/13] mmc: mmci: Add support to data commands via variant structure.
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v4 11/13] mmc: mmci: add f_max to variant structure
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v4 12/13] mmc: mmci: add explicit clk control
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v4 13/13] mmc: mmci: Add Qcom specific pio_read function.
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v4 08/13] mmc: mmci: add edge support to data and command out in variant data.
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v4 06/13] mmc: mmci: add ddrmode mask to variant data
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v4 05/13] mmc: mmci: Add Qcom datactrl register variant
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v4 04/13] mmc: mmci: Add enough delay between writes to CMD register.
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v4 01/13] mmc: mmci: use NSEC_PER_SEC macro
  • From: srinivas.kandagatla@xxxxxxxxxx
• [PATCH v4 00/13] Add Qualcomm SD Card Controller support
  • From: srinivas.kandagatla@xxxxxxxxxx
• Broadcom BCM57765/57785 SDXC/MMC Card Reader doesn't work for Ultra High Speed SD cards
  • From: Magnus Hoff <maghoff@xxxxxxxxx>
• Re: [PATCH] mmc: core: Remove redundant runtime_idle callback
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 02/11] pinctrl: sunxi: add IRQCHIP_SKIP_SET_WAKE flag for pinctrl irq chip
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: [PATCH 03/11] pinctrl: sunxi: Move setting of mux to irq type from unmask to set_type
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/11] pinctrl: sunxi: add IRQCHIP_SKIP_SET_WAKE flag for pinctrl irq chip
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 12/13] mmc: mmci: add explicit clk control
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Arend van Spriel <arend@xxxxxxxxxxxx>
• Re: [PATCH v3 10/13] mmc: mmci: add Qcom specifics of clk and datactrl registers.
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 03/11] pinctrl: sunxi: Move setting of mux to irq type from unmask to set_type
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH] mmc: core: Remove redundant runtime_idle callback
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 10/13] mmc: mmci: add Qcom specifics of clk and datactrl registers.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 03/11] pinctrl: sunxi: Move setting of mux to irq type from unmask to set_type
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 03/11] pinctrl: sunxi: Move setting of mux to irq type from unmask to set_type
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 09/11] brcmfmac: Fix OOB interrupt not working for BCM43362
  • From: Arend van Spriel <arend@xxxxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH 01/11] pinctrl: sunxi: create irq/pin mapping during init
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 13/13] mmc: mmci: Add Qcom specific pio_read function.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v3 12/13] mmc: mmci: add explicit clk control
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v3 13/13] mmc: mmci: Add Qcom specific pio_read function.
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 12/13] mmc: mmci: add explicit clk control
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 08/13] mmc: mmci: add 8bit bus support in variant data
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 08/13] mmc: mmci: add 8bit bus support in variant data
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• [PATCHv3 3/4] mmc: dw_mmc: remove the "supports-highspeed" property.
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCHv3 4/4] ARM: dts: replace the slot property into slot sub-node for dwmmc.
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCHv3 0/4] mmc: fixed the mmc_of_parse for dwmmc
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCHv3 1/4] mmc: host: add slot argument to mmc_of_parse
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• [PATCHv3 2/4] mmc: dw_mmc: use the __mmc_of_parse to parse the slot node
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH 09/11] brcmfmac: Fix OOB interrupt not working for BCM43362
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Arend van Spriel <arend@xxxxxxxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Olof Johansson <olof@xxxxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 09/11] brcmfmac: Fix OOB interrupt not working for BCM43362
  • From: Arend van Spriel <arend@xxxxxxxxxxxx>
• Re: [PATCH 00/11] sdio wifi oob irq support for sunxi
  • From: Arend van Spriel <arend@xxxxxxxxxxxx>
• Re: [PATCH 02/11] pinctrl: sunxi: add IRQCHIP_SKIP_SET_WAKE flag for pinctrl irq chip
  • From: Tomasz Figa <tomasz.figa@xxxxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Mark Brown <broonie@xxxxxxxxxx>
• Re: [PATCH 00/11] sdio wifi oob irq support for sunxi
  • From: "John W. Linville" <linville@xxxxxxxxxxxxx>
• Re: [PATCH 1/1] mmc: sdhci-esdhc-imx: fix mmc ddr mode regression issue
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH 01/11] pinctrl: sunxi: create irq/pin mapping during init
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 03/11] pinctrl: sunxi: Move setting of mux to irq type from unmask to set_type
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 12/13] mmc: mmci: add explicit clk control
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 01/11] pinctrl: sunxi: create irq/pin mapping during init
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 12/13] mmc: mmci: add explicit clk control
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 1/1] mmc: sdhci-esdhc-imx: fix mmc ddr mode regression issue
  • From: Fabio Estevam <festevam@xxxxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH v3 03/13] mmc: mmci: Add Qualcomm Id to amba id table
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v3 12/13] mmc: mmci: add explicit clk control
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH 1/1] mmc: moxart: Remove unneeded version.h inclusion
  • From: Sachin Kamat <sachin.kamat@xxxxxxxxxx>
• Re: [PATCHv2 3/3] ARM: dts: replace the broken-cd property into slot node for dwmmc.
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCHv2 3/3] ARM: dts: replace the broken-cd property into slot node for dwmmc.
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCHv2 2/3] mmc: dw_mmc: use the __mmc_of_parse to parse the slot node
  • From: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
• Re: [PATCH 02/11] pinctrl: sunxi: add IRQCHIP_SKIP_SET_WAKE flag for pinctrl irq chip
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• RE: [PATCHv2 3/3] ARM: dts: replace the broken-cd property into slot node for dwmmc.
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• RE: [PATCHv2 2/3] mmc: dw_mmc: use the __mmc_of_parse to parse the slot node
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• RE: [PATCHv2 1/3] mmc: host: add slot argument to mmc_of_parse
  • From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
• Re: [PATCH v3 12/13] mmc: mmci: add explicit clk control
  • From: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
• Re: [PATCH 02/11] pinctrl: sunxi: add IRQCHIP_SKIP_SET_WAKE flag for pinctrl irq chip
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 03/11] pinctrl: sunxi: Move setting of mux to irq type from unmask to set_type
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [linux-sunxi] Re: [PATCH 01/11] pinctrl: sunxi: create irq/pin mapping during init
  • From: Chen-Yu Tsai <wens@xxxxxxxx>
• Re: [PATCH 03/11] pinctrl: sunxi: Move setting of mux to irq type from unmask to set_type
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 02/11] pinctrl: sunxi: add IRQCHIP_SKIP_SET_WAKE flag for pinctrl irq chip
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH 01/11] pinctrl: sunxi: create irq/pin mapping during init
  • From: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 12/13] mmc: mmci: add explicit clk control
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v3 10/13] mmc: mmci: add Qcom specifics of clk and datactrl registers.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: RFC: representing sdio devices oob interrupt, clks, etc. in device tree
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 13/13] mmc: mmci: Add Qcom specific pio_read function.
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
• Re: [PATCH v3 07/13] mmc: mmci: add ddrmode mask to variant data
  • From: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>