On Wed, May 28, 2014 at 10:17 PM, Jaehoon Chung <jh80.chung@xxxxxxxxxxx> wrote:
> Hi, Sonny.
>
> On 05/29/2014 09:35 AM, Sonny Rao wrote:
>> This patch changes the fifo reset code to follow the reset procedure
>> outlined in the documentation of Synopsys Mobile storage host databook.
>>
>> Signed-off-by: Sonny Rao <sonnyrao@xxxxxxxxxxxx>
>> Signed-off-by: Yuvaraj Kumar C D <yuvaraj.cd@xxxxxxxxxxx>
>> ---
>> v2: Add Generic DMA support
>> per the documentation, move interrupt clear before wait
>> make the test for DMA host->use_dma rather than host->using_dma
>> add proper return values (although it appears no caller checks)
>> v3: rename fifo reset function, and change callers
>> use this combined reset function in dw_mci_resume()
>> just one caller left (probe), so get rid of dw_mci_ctrl_all_reset()
>> use DMA reset bit for all systems which use DMA
>> remove extra IDMAC reset in dw_mci_work_routine_card()
>> do CIU clock update in error path, if CIU reset cleared
>>
>> drivers/mmc/host/dw_mmc.c | 85 +++++++++++++++++++++++++++++++++++------------
>> drivers/mmc/host/dw_mmc.h | 1 +
>> 2 files changed, 64 insertions(+), 22 deletions(-)
>>
>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>> index 55cd110..988492c 100644
>> --- a/drivers/mmc/host/dw_mmc.c
>> +++ b/drivers/mmc/host/dw_mmc.c
>> @@ -111,8 +111,7 @@ static const u8 tuning_blk_pattern_8bit[] = {
>> 0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee,
>> };
>>
>> -static inline bool dw_mci_fifo_reset(struct dw_mci *host);
>> -static inline bool dw_mci_ctrl_all_reset(struct dw_mci *host);
>> +static inline bool dw_mci_reset(struct dw_mci *host);
>>
>> #if defined(CONFIG_DEBUG_FS)
>> static int dw_mci_req_show(struct seq_file *s, void *v)
>> @@ -1254,7 +1253,7 @@ static int dw_mci_data_complete(struct dw_mci *host, struct mmc_data *data)
>> * After an error, there may be data lingering
>> * in the FIFO
>> */
>> - dw_mci_fifo_reset(host);
>> + dw_mci_reset(host);
>> } else {
>> data->bytes_xfered = data->blocks * data->blksz;
>> data->error = 0;
>> @@ -1371,7 +1370,7 @@ static void dw_mci_tasklet_func(unsigned long priv)
>>
>> /* CMD error in data command */
>> if (mrq->cmd->error && mrq->data)
>> - dw_mci_fifo_reset(host);
>> + dw_mci_reset(host);
>>
>> host->cmd = NULL;
>> host->data = NULL;
>> @@ -1982,14 +1981,9 @@ static void dw_mci_work_routine_card(struct work_struct *work)
>> }
>>
>> /* Power down slot */
>> - if (present == 0) {
>> + if (present == 0)
>> /* Clear down the FIFO */
> Didn't Need to change the Comment?
Well, it does still clear the fifo, but I can remove the comment since
we are now doing more than that.
>> - dw_mci_fifo_reset(host);
>> -#ifdef CONFIG_MMC_DW_IDMAC
>> - dw_mci_idmac_reset(host);
>> -#endif
>> -
>> - }
>> + dw_mci_reset(host);
>>
>> spin_unlock_bh(&host->lock);
>>
>> @@ -2323,8 +2317,11 @@ static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset)
>> return false;
>> }
>>
>> -static inline bool dw_mci_fifo_reset(struct dw_mci *host)
>> +static inline bool dw_mci_reset(struct dw_mci *host)
>> {
>> + u32 flags = SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET;
>> + bool ret = false;
>> +
>> /*
>> * Reseting generates a block interrupt, hence setting
>> * the scatter-gather pointer to NULL.
>> @@ -2334,15 +2331,57 @@ static inline bool dw_mci_fifo_reset(struct dw_mci *host)
>> host->sg = NULL;
>> }
>>
>> - return dw_mci_ctrl_reset(host, SDMMC_CTRL_FIFO_RESET);
>> -}
>> + if (host->use_dma)
>> + flags |= SDMMC_CTRL_DMA_RESET;
>>
>> -static inline bool dw_mci_ctrl_all_reset(struct dw_mci *host)
>> -{
>> - return dw_mci_ctrl_reset(host,
>> - SDMMC_CTRL_FIFO_RESET |
>> - SDMMC_CTRL_RESET |
>> - SDMMC_CTRL_DMA_RESET);
>> + if (dw_mci_ctrl_reset(host, flags)) {
>> + /*
>> + * In all cases we clear the RAWINTS register to clear any
>> + * interrupts.
>> + */
>> + mci_writel(host, RINTSTS, 0xFFFFFFFF);
>> +
>> + /* if using dma we wait for dma_req to clear */
>> + if (host->use_dma) {
>> + unsigned long timeout = jiffies + msecs_to_jiffies(500);
>> + u32 status;
>> + do {
>> + status = mci_readl(host, STATUS);
>> + if (!(status & SDMMC_STATUS_DMA_REQ))
>> + break;
>> + cpu_relax();
>> + } while (time_before(jiffies, timeout));
>> +
>> + if (status & SDMMC_STATUS_DMA_REQ) {
>> + dev_err(host->dev,
>> + "%s: Timeout waiting for dma_req to "
>> + "clear during reset", __func__);
>> + goto ciu_out;
>> + }
>> +
>> + /* when using DMA next we reset the fifo again */
>> + if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_FIFO_RESET))
>> + goto ciu_out;
>> + }
>> + } else {
>> + dev_err(host->dev, "%s: Reset bits didn't clear", __func__);
>> +
>> + /* if the controller reset bit did clear, then set clock regs */
> I have some confusion at this point. you added the above error message "Reset bits didn't clear".
> But this comment is "if the controller reset bit did clear..".
>
> I think that dev_err message would be better to locate into "if (!(mci_read(host, CTRL) & ...)".
>
Ok, I'll move this error message inside the if block and make it more specific.
>> + if (!(mci_readl(host, CTRL) & SDMMC_CTRL_RESET))
>> + goto ciu_out;
>> + }
>> +
>> + if (IS_ENABLED(CONFIG_MMC_DW_IDMAC))
>> + /* It is also recommended that we reset and reprogram idmac */
>> + dw_mci_idmac_reset(host);
>> +
>> + ret = true;
>> +
>> +ciu_out:
>> + /* After a CTRL reset we need to have CIU set clock registers */
>> + mci_send_cmd(host->cur_slot, SDMMC_CMD_UPD_CLK, 0);
>> +
>> + return ret;
>> }
>>
>> #ifdef CONFIG_OF
>> @@ -2432,6 +2471,7 @@ int dw_mci_probe(struct dw_mci *host)
>> const struct dw_mci_drv_data *drv_data = host->drv_data;
>> int width, i, ret = 0;
>> u32 fifo_size;
>> + u32 flags;
>> int init_slots = 0;
>>
>> if (!host->pdata) {
>> @@ -2555,7 +2595,8 @@ int dw_mci_probe(struct dw_mci *host)
>> }
>>
>> /* Reset all blocks */
>> - if (!dw_mci_ctrl_all_reset(host))
>> + flags = SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET | SDMMC_CTRL_DMA_RESET;
> how about adding the SDMMC_CTRL_ALL_RESET macro into header file?
> #define SDMMC_CTRL_ALL_RESET (.....)
>
ok I'll make a macro in dw_mmc.h for this.
>> + if (!dw_mci_ctrl_reset(host, flags))
>> return -ENODEV;
>>
>> host->dma_ops = host->pdata->dma_ops;
>> @@ -2744,7 +2785,7 @@ int dw_mci_resume(struct dw_mci *host)
>> }
>> }
>>
>> - if (!dw_mci_ctrl_all_reset(host)) {
>> + if (!dw_mci_reset(host)) {
>> ret = -ENODEV;
>> return ret;
>> }
>> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
>> index 6bf24ab..2505804 100644
>> --- a/drivers/mmc/host/dw_mmc.h
>> +++ b/drivers/mmc/host/dw_mmc.h
>> @@ -129,6 +129,7 @@
>> #define SDMMC_CMD_INDX(n) ((n) & 0x1F)
>> /* Status register defines */
>> #define SDMMC_GET_FCNT(x) (((x)>>17) & 0x1FFF)
>> +#define SDMMC_STATUS_DMA_REQ BIT(31)
>> /* FIFOTH register defines */
>> #define SDMMC_SET_FIFOTH(m, r, t) (((m) & 0x7) << 28 | \
>> ((r) & 0xFFF) << 16 | \
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
