On 13 June 2014 19:13, Markus Mayer <markus.mayer@xxxxxxxxxx> wrote:
> From: Tim Kryger <tim.kryger@xxxxxxxxx>
>
> Switch the common SDHCI code over to use mmc_host's regulator pointers
> and remove the ones in the sdhci_host structure. Additionally, use the
> common mmc_regulator_get_supply function to get the regulators and set
> the ocr_avail mask.
>
> This change sets the ocr_avail directly based upon the voltage ranges
> supported which ensures ocr_avail is set correctly while allowing the
> use of regulators that can't provide exactly 1.8v, 3.0v, or 3.3v.
>
> Signed-off-by: Tim Kryger <tim.kryger@xxxxxxxxx>
> Signed-off-by: Markus Mayer <markus.mayer@xxxxxxxxxx>
> Reviewed-by: Matt Porter <mporter@xxxxxxxxxx>
Thanks!
Applied for next.
Kind regards
Uffe
> ---
> drivers/mmc/host/sdhci.c | 97 ++++++++++++++++++-----------------------------
> include/linux/mmc/sdhci.h | 3 --
> 2 files changed, 36 insertions(+), 64 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 47055f3..ee524b0 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1223,6 +1223,7 @@ EXPORT_SYMBOL_GPL(sdhci_set_clock);
> static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
> unsigned short vdd)
> {
> + struct mmc_host *mmc = host->mmc;
> u8 pwr = 0;
>
> if (mode != MMC_POWER_OFF) {
> @@ -1284,9 +1285,9 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
> mdelay(10);
> }
>
> - if (host->vmmc) {
> + if (!IS_ERR(mmc->supply.vmmc)) {
> spin_unlock_irq(&host->lock);
> - mmc_regulator_set_ocr(host->mmc, host->vmmc, vdd);
> + mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, vdd);
> spin_lock_irq(&host->lock);
> }
> }
> @@ -1440,13 +1441,15 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios)
> {
> unsigned long flags;
> u8 ctrl;
> + struct mmc_host *mmc = host->mmc;
>
> spin_lock_irqsave(&host->lock, flags);
>
> if (host->flags & SDHCI_DEVICE_DEAD) {
> spin_unlock_irqrestore(&host->lock, flags);
> - if (host->vmmc && ios->power_mode == MMC_POWER_OFF)
> - mmc_regulator_set_ocr(host->mmc, host->vmmc, 0);
> + if (!IS_ERR(mmc->supply.vmmc) &&
> + ios->power_mode == MMC_POWER_OFF)
> + mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, 0);
> return;
> }
>
> @@ -1707,6 +1710,7 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable)
> static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
> struct mmc_ios *ios)
> {
> + struct mmc_host *mmc = host->mmc;
> u16 ctrl;
> int ret;
>
> @@ -1725,8 +1729,9 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
> ctrl &= ~SDHCI_CTRL_VDD_180;
> sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
>
> - if (host->vqmmc) {
> - ret = regulator_set_voltage(host->vqmmc, 2700000, 3600000);
> + if (!IS_ERR(mmc->supply.vqmmc)) {
> + ret = regulator_set_voltage(mmc->supply.vqmmc, 2700000,
> + 3600000);
> if (ret) {
> pr_warning("%s: Switching to 3.3V signalling voltage "
> " failed\n", mmc_hostname(host->mmc));
> @@ -1746,8 +1751,8 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
>
> return -EAGAIN;
> case MMC_SIGNAL_VOLTAGE_180:
> - if (host->vqmmc) {
> - ret = regulator_set_voltage(host->vqmmc,
> + if (!IS_ERR(mmc->supply.vqmmc)) {
> + ret = regulator_set_voltage(mmc->supply.vqmmc,
> 1700000, 1950000);
> if (ret) {
> pr_warning("%s: Switching to 1.8V signalling voltage "
> @@ -1776,8 +1781,9 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host,
>
> return -EAGAIN;
> case MMC_SIGNAL_VOLTAGE_120:
> - if (host->vqmmc) {
> - ret = regulator_set_voltage(host->vqmmc, 1100000, 1300000);
> + if (!IS_ERR(mmc->supply.vqmmc)) {
> + ret = regulator_set_voltage(mmc->supply.vqmmc, 1100000,
> + 1300000);
> if (ret) {
> pr_warning("%s: Switching to 1.2V signalling voltage "
> " failed\n", mmc_hostname(host->mmc));
> @@ -2962,25 +2968,22 @@ int sdhci_add_host(struct sdhci_host *host)
> !(host->mmc->caps & MMC_CAP_NONREMOVABLE))
> mmc->caps |= MMC_CAP_NEEDS_POLL;
>
> + /* If there are external regulators, get them */
> + if (mmc_regulator_get_supply(mmc) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> +
> /* If vqmmc regulator and no 1.8V signalling, then there's no UHS */
> - host->vqmmc = regulator_get_optional(mmc_dev(mmc), "vqmmc");
> - if (IS_ERR_OR_NULL(host->vqmmc)) {
> - if (PTR_ERR(host->vqmmc) < 0) {
> - pr_info("%s: no vqmmc regulator found\n",
> - mmc_hostname(mmc));
> - host->vqmmc = NULL;
> - }
> - } else {
> - ret = regulator_enable(host->vqmmc);
> - if (!regulator_is_supported_voltage(host->vqmmc, 1700000,
> - 1950000))
> + if (!IS_ERR(mmc->supply.vqmmc)) {
> + ret = regulator_enable(mmc->supply.vqmmc);
> + if (!regulator_is_supported_voltage(mmc->supply.vqmmc, 1700000,
> + 1950000))
> caps[1] &= ~(SDHCI_SUPPORT_SDR104 |
> SDHCI_SUPPORT_SDR50 |
> SDHCI_SUPPORT_DDR50);
> if (ret) {
> pr_warn("%s: Failed to enable vqmmc regulator: %d\n",
> mmc_hostname(mmc), ret);
> - host->vqmmc = NULL;
> + mmc->supply.vqmmc = NULL;
> }
> }
>
> @@ -3041,34 +3044,6 @@ int sdhci_add_host(struct sdhci_host *host)
>
> ocr_avail = 0;
>
> - host->vmmc = regulator_get_optional(mmc_dev(mmc), "vmmc");
> - if (IS_ERR_OR_NULL(host->vmmc)) {
> - if (PTR_ERR(host->vmmc) < 0) {
> - pr_info("%s: no vmmc regulator found\n",
> - mmc_hostname(mmc));
> - host->vmmc = NULL;
> - }
> - }
> -
> -#ifdef CONFIG_REGULATOR
> - /*
> - * Voltage range check makes sense only if regulator reports
> - * any voltage value.
> - */
> - if (host->vmmc && regulator_get_voltage(host->vmmc) > 0) {
> - ret = regulator_is_supported_voltage(host->vmmc, 2700000,
> - 3600000);
> - if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_330)))
> - caps[0] &= ~SDHCI_CAN_VDD_330;
> - if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_300)))
> - caps[0] &= ~SDHCI_CAN_VDD_300;
> - ret = regulator_is_supported_voltage(host->vmmc, 1700000,
> - 1950000);
> - if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_180)))
> - caps[0] &= ~SDHCI_CAN_VDD_180;
> - }
> -#endif /* CONFIG_REGULATOR */
> -
> /*
> * According to SD Host Controller spec v3.00, if the Host System
> * can afford more than 150mA, Host Driver should set XPC to 1. Also
> @@ -3077,8 +3052,8 @@ int sdhci_add_host(struct sdhci_host *host)
> * value.
> */
> max_current_caps = sdhci_readl(host, SDHCI_MAX_CURRENT);
> - if (!max_current_caps && host->vmmc) {
> - u32 curr = regulator_get_current_limit(host->vmmc);
> + if (!max_current_caps && !IS_ERR(mmc->supply.vmmc)) {
> + u32 curr = regulator_get_current_limit(mmc->supply.vmmc);
> if (curr > 0) {
>
> /* convert to SDHCI_MAX_CURRENT format */
> @@ -3118,8 +3093,11 @@ int sdhci_add_host(struct sdhci_host *host)
> SDHCI_MAX_CURRENT_MULTIPLIER;
> }
>
> + if (mmc->ocr_avail)
> + ocr_avail &= mmc->ocr_avail;
> +
> if (host->ocr_mask)
> - ocr_avail = host->ocr_mask;
> + ocr_avail &= host->ocr_mask;
>
> mmc->ocr_avail = ocr_avail;
> mmc->ocr_avail_sdio = ocr_avail;
> @@ -3273,6 +3251,7 @@ EXPORT_SYMBOL_GPL(sdhci_add_host);
>
> void sdhci_remove_host(struct sdhci_host *host, int dead)
> {
> + struct mmc_host *mmc = host->mmc;
> unsigned long flags;
>
> if (dead) {
> @@ -3310,15 +3289,11 @@ void sdhci_remove_host(struct sdhci_host *host, int dead)
>
> tasklet_kill(&host->finish_tasklet);
>
> - if (host->vmmc) {
> - regulator_disable(host->vmmc);
> - regulator_put(host->vmmc);
> - }
> + if (!IS_ERR(mmc->supply.vmmc))
> + regulator_disable(mmc->supply.vmmc);
>
> - if (host->vqmmc) {
> - regulator_disable(host->vqmmc);
> - regulator_put(host->vqmmc);
> - }
> + if (!IS_ERR(mmc->supply.vqmmc))
> + regulator_disable(mmc->supply.vqmmc);
>
> if (host->adma_desc)
> dma_free_coherent(mmc_dev(host->mmc), ADMA_SIZE,
> diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
> index 08abe99..09ebe57 100644
> --- a/include/linux/mmc/sdhci.h
> +++ b/include/linux/mmc/sdhci.h
> @@ -104,9 +104,6 @@ struct sdhci_host {
>
> const struct sdhci_ops *ops; /* Low level hw interface */
>
> - struct regulator *vmmc; /* Power regulator (vmmc) */
> - struct regulator *vqmmc; /* Signaling regulator (vccq) */
> -
> /* Internal data */
> struct mmc_host *mmc; /* MMC structure */
> u64 dma_mask; /* custom DMA mask */
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
