Re: [linux-sunxi] Re: [PATCH 01/11] pinctrl: sunxi: create irq/pin mapping during init

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, May 27, 2014 at 4:02 PM, Maxime Ripard
<maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> Hi,
>
> On Mon, May 26, 2014 at 09:47:56AM +0200, Hans de Goede wrote:
>> From: Chen-Yu Tsai <wens@xxxxxxxx>
>>
>> The irq/pin mapping is used to lookup the pin to mux to the irq
>> function when the irq is enabled. It is created when gpio_to_irq
>> is called. Creating the mapping during init allows us to map the
>> interrupts directly from the device tree.
>
> Can you be a bit more precise on this?
>
> What is the issue that this patch fix?

IIRC, originally the IRQ to pin mapping was created when gpio_to_irq
was called with a GPIO handle. The mapping in turn is used to mux
the pin into EINT mode.

If the mapping is created during gpio_to_irq, we can't use the
interrupts directly, i.e. through the DT with "interrupts = <&pio A 4>".

Instead we'd have to use "gpios = <&pio A B>", then pass the gpio
through to gpio_to_irq.


ChenYu
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux