[RFC PATCH v2 6/6] mmc: core: add manual resume capability

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch adds manual resume for some embedded platforms with rootfs
stored in SD card. It references CONFIG_MMC_BLOCK_DEFERRED_RESUME in
kernel 3.10. It lets host controller driver to manually handle resume
by itself.

[symptom]
This issue is found on mb86s7x platforms with rootfs stored in SD card.
It failed to resume form STR suspend mode because SD card cannot be ready
in time. It take longer time (e.g., 600ms) to be ready for access.
The error log looks like below:

root@localhost:~# echo mem > /sys/power/state
[   30.441974] SUSPEND

SCB Firmware : Category 01 Version 02.03 Rev. 00_
    Config   : (no configuration)
root@localhost:~# [   30.702976] Buffer I/O error on device mmcblk1p2, logical block 31349
[   30.709678] Buffer I/O error on device mmcblk1p2, logical block 168073
[   30.716220] Buffer I/O error on device mmcblk1p2, logical block 168074
[   30.722759] Buffer I/O error on device mmcblk1p2, logical block 168075
[   30.729456] Buffer I/O error on device mmcblk1p2, logical block 31349
[   30.735916] Buffer I/O error on device mmcblk1p2, logical block 31350
[   30.742370] Buffer I/O error on device mmcblk1p2, logical block 31351
[   30.749025] Buffer I/O error on device mmcblk1p2, logical block 168075
[   30.755657] Buffer I/O error on device mmcblk1p2, logical block 31351
[   30.763130] Aborting journal on device mmcblk1p2-8.
[   30.768060] JBD2: Error -5 detected when updating journal superblock for mmcblk1p2-8.
[   30.776085] EXT4-fs error (device mmcblk1p2): ext4_journal_check_start:56: Detected aborted journal
[   30.785259] EXT4-fs (mmcblk1p2): Remounting filesystem read-only
[   31.370716] EXT4-fs error (device mmcblk1p2): ext4_find_entry:1309: inode #2490369: comm udevd: reading directory lblock 0
[   31.382485] EXT4-fs error (device mmcblk1p2): ext4_find_entry:1309: inode #1048577: comm udevd: reading directory lblock 0

[analysis]
In system resume path, mmc_sd_resume() is failed with error code -123
because at that time SD card is still not ready on mb86s7x platforms.

[solution]
In order to not blocking system resume path, this patch just sets a flag
MMC_BUSRESUME_MANUAL_RESUME when this error happened, and then host controller
driver can understand it by this flag. Then host controller driver have to
resume SD card manually and asynchronously.

Signed-off-by: Vincent Yang <Vincent.Yang@xxxxxxxxxxxxxx>
---
 drivers/mmc/core/core.c          |  4 ++
 drivers/mmc/core/sd.c            |  4 ++
 drivers/mmc/host/sdhci_f_sdh30.c | 89 ++++++++++++++++++++++++++++++++++++++++
 include/linux/mmc/host.h         | 14 +++++++
 4 files changed, 111 insertions(+)

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 764af63..51fce49 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -2648,6 +2648,10 @@ int mmc_pm_notify(struct notifier_block *notify_block,
 	case PM_POST_RESTORE:
 
 		spin_lock_irqsave(&host->lock, flags);
+		if (mmc_bus_manual_resume(host)) {
+			spin_unlock_irqrestore(&host->lock, flags);
+			break;
+		}
 		host->rescan_disable = 0;
 		spin_unlock_irqrestore(&host->lock, flags);
 		_mmc_detect_change(host, 0, false);
diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 0c44510..859390d 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -1133,6 +1133,10 @@ static int mmc_sd_resume(struct mmc_host *host)
 
 	if (!(host->caps & MMC_CAP_RUNTIME_RESUME)) {
 		err = _mmc_sd_resume(host);
+		if ((host->caps2 & MMC_CAP2_MANUAL_RESUME) && err)
+			mmc_set_bus_resume_policy(host, 1);
+		else
+			mmc_set_bus_resume_policy(host, 0);
 		pm_runtime_set_active(&host->card->dev);
 		pm_runtime_mark_last_busy(&host->card->dev);
 	}
diff --git a/drivers/mmc/host/sdhci_f_sdh30.c b/drivers/mmc/host/sdhci_f_sdh30.c
index 6fae509..67bcff2 100644
--- a/drivers/mmc/host/sdhci_f_sdh30.c
+++ b/drivers/mmc/host/sdhci_f_sdh30.c
@@ -30,6 +30,12 @@
 #include "../core/core.h"
 
 #define DRIVER_NAME "f_sdh30"
+#define RESUME_WAIT_COUNT	100
+#define RESUME_WAIT_TIME	50
+#define RESUME_WAIT_JIFFIES	msecs_to_jiffies(RESUME_DETECT_TIME)
+#define RESUME_DETECT_COUNT	16
+#define RESUME_DETECT_TIME	50
+#define RESUME_DETECT_JIFFIES	msecs_to_jiffies(RESUME_DETECT_TIME)
 
 
 struct f_sdhost_priv {
@@ -38,8 +44,59 @@ struct f_sdhost_priv {
 	int gpio_select_1v8;
 	u32 vendor_hs200;
 	struct device *dev;
+	unsigned int quirks;	/* Deviations from spec. */
+
+/* retry to detect mmc device when resume */
+#define F_SDH30_QUIRK_RESUME_DETECT_RETRY		(1<<0)
+
+	struct workqueue_struct *resume_detect_wq;
+	struct delayed_work resume_detect_work;
+	unsigned int		resume_detect_count;
+	unsigned int		resume_wait_count;
 };
 
+static void sdhci_f_sdh30_resume_detect_work_func(struct work_struct *work)
+{
+	struct f_sdhost_priv *priv = container_of(work, struct f_sdhost_priv,
+		resume_detect_work.work);
+	struct sdhci_host *host = dev_get_drvdata(priv->dev);
+	int err = 0;
+
+	if (mmc_bus_manual_resume(host->mmc)) {
+		pm_runtime_disable(&host->mmc->card->dev);
+		mmc_card_set_suspended(host->mmc->card);
+		err = host->mmc->bus_ops->resume(host->mmc);
+		if (priv->resume_detect_count-- && err)
+			queue_delayed_work(priv->resume_detect_wq,
+					   &priv->resume_detect_work,
+				RESUME_DETECT_JIFFIES);
+		else
+			pr_debug("%s: resume detection done (count:%d, wait:%d, err:%d)\n",
+				 mmc_hostname(host->mmc),
+				 priv->resume_detect_count,
+				 priv->resume_wait_count, err);
+	} else {
+		if (priv->resume_wait_count--)
+			queue_delayed_work(priv->resume_detect_wq,
+					   &priv->resume_detect_work,
+				RESUME_WAIT_JIFFIES);
+		else
+			pr_debug("%s: resume done\n", mmc_hostname(host->mmc));
+	}
+}
+
+static void sdhci_f_sdh30_resume_detect(struct mmc_host *mmc,
+					int detect, int wait)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	struct f_sdhost_priv *priv = sdhci_priv(host);
+
+	priv->resume_detect_count = detect;
+	priv->resume_wait_count = wait;
+	queue_delayed_work(priv->resume_detect_wq,
+			   &priv->resume_detect_work, 0);
+}
+
 void sdhci_f_sdh30_soft_voltage_switch(struct sdhci_host *host)
 {
 	struct f_sdhost_priv *priv = sdhci_priv(host);
@@ -146,6 +203,12 @@ static int sdhci_f_sdh30_probe(struct platform_device *pdev)
 		}
 	}
 
+	if (of_find_property(pdev->dev.of_node, "resume-detect-retry", NULL)) {
+		dev_info(dev, "Applying resume detect retry quirk\n");
+		priv->quirks |= F_SDH30_QUIRK_RESUME_DETECT_RETRY;
+		host->mmc->caps2 |= MMC_CAP2_MANUAL_RESUME;
+	}
+
 	ret = mmc_of_parse_voltage(pdev->dev.of_node, &host->ocr_mask);
 	if (ret) {
 		dev_err(dev, "%s: parse voltage error\n", __func__);
@@ -197,6 +260,18 @@ static int sdhci_f_sdh30_probe(struct platform_device *pdev)
 		}
 	}
 
+	/* Init workqueue */
+	if (priv->quirks & F_SDH30_QUIRK_RESUME_DETECT_RETRY) {
+		priv->resume_detect_wq = create_workqueue("sdhci_f_sdh30");
+		if (priv->resume_detect_wq == NULL) {
+			ret = -ENOMEM;
+			dev_err(dev, "Failed to create resume detection workqueue\n");
+			goto err_init_wq;
+		}
+		INIT_DELAYED_WORK(&priv->resume_detect_work,
+				  sdhci_f_sdh30_resume_detect_work_func);
+	}
+
 	ret = sdhci_add_host(host);
 	if (ret) {
 		dev_err(dev, "%s: host add error\n", __func__);
@@ -229,6 +304,9 @@ static int sdhci_f_sdh30_probe(struct platform_device *pdev)
 	return 0;
 
 err_add_host:
+	if (priv->quirks & F_SDH30_QUIRK_RESUME_DETECT_RETRY)
+		destroy_workqueue(priv->resume_detect_wq);
+err_init_wq:
 	if (gpio_is_valid(priv->gpio_select_1v8)) {
 		gpio_direction_output(priv->gpio_select_1v8, 1);
 		gpio_free(priv->gpio_select_1v8);
@@ -268,6 +346,9 @@ static int sdhci_f_sdh30_remove(struct platform_device *pdev)
 		gpio_free(priv->gpio_select_1v8);
 	}
 
+	if (priv->quirks & F_SDH30_QUIRK_RESUME_DETECT_RETRY)
+		destroy_workqueue(priv->resume_detect_wq);
+
 	sdhci_free_host(host);
 	platform_set_drvdata(pdev, NULL);
 
@@ -285,7 +366,15 @@ static int sdhci_f_sdh30_suspend(struct device *dev)
 static int sdhci_f_sdh30_resume(struct device *dev)
 {
 	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct f_sdhost_priv *priv = sdhci_priv(host);
 
+	if (priv->quirks & F_SDH30_QUIRK_RESUME_DETECT_RETRY) {
+		pr_debug("%s: start resume detect\n",
+			 mmc_hostname(host->mmc));
+		sdhci_f_sdh30_resume_detect(host->mmc,
+					    RESUME_DETECT_COUNT,
+					    RESUME_WAIT_COUNT);
+	}
 	return sdhci_resume_host(host);
 }
 #endif
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 7960424..55221dd 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -283,6 +283,7 @@ struct mmc_host {
 #define MMC_CAP2_HS400		(MMC_CAP2_HS400_1_8V | \
 				 MMC_CAP2_HS400_1_2V)
 #define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17)
+#define MMC_CAP2_MANUAL_RESUME     (1 << 18)	/* Resume manually when error */
 
 	mmc_pm_flag_t		pm_caps;	/* supported pm features */
 
@@ -338,6 +339,9 @@ struct mmc_host {
 	const struct mmc_bus_ops *bus_ops;	/* current bus driver */
 	unsigned int		bus_refs;	/* reference counter */
 
+	unsigned int		bus_resume_flags;
+#define MMC_BUSRESUME_MANUAL_RESUME	(1 << 0)
+
 	unsigned int		sdio_irqs;
 	struct task_struct	*sdio_irq_thread;
 	bool			sdio_irq_pending;
@@ -384,6 +388,16 @@ static inline void *mmc_priv(struct mmc_host *host)
 #define mmc_dev(x)	((x)->parent)
 #define mmc_classdev(x)	(&(x)->class_dev)
 #define mmc_hostname(x)	(dev_name(&(x)->class_dev))
+#define mmc_bus_manual_resume(host) ((host)->bus_resume_flags &		\
+	MMC_BUSRESUME_MANUAL_RESUME)
+
+static inline void mmc_set_bus_resume_policy(struct mmc_host *host, int manual)
+{
+	if (manual)
+		host->bus_resume_flags |= MMC_BUSRESUME_MANUAL_RESUME;
+	else
+		host->bus_resume_flags &= ~MMC_BUSRESUME_MANUAL_RESUME;
+}
 
 int mmc_power_save_host(struct mmc_host *host);
 int mmc_power_restore_host(struct mmc_host *host);
-- 
1.9.0

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux