Hi,
We are adding support for a new Fujitsu sdhci IP.
These patches are against v3.16-rc1 mainline since nothing in
mmc-next at this moment.
These patches are tested on 3.16-rc1 integration tree.
We welcome any comment and advice about how to make any
improvements or better align them with upstream.
Changes from v1:
- Add sufficient description in DT binding ducument
- Remove one patch "mmc: sdhci: add quirk for broken 3.0V support" and use
voltage-ranges = <> in the device tree instead
Thanks a lot!
Best regards,
Vincent Yang
Vincent Yang (6):
mmc: sdhci: add quirk for voltage switch callback
mmc: sdhci: add quirk for tuning work around
mmc: sdhci: add quirk for single block transactions
mmc: sdhci: host: add new f_sdh30
mmc: core: hold SD Clock before CMD11 during Signal Voltage Switch
Procedure
mmc: core: add manual resume capability
.../devicetree/bindings/mmc/sdhci-fujitsu.txt | 35 ++
drivers/mmc/core/core.c | 8 +-
drivers/mmc/core/sd.c | 4 +
drivers/mmc/host/Kconfig | 7 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/sdhci.c | 15 +-
drivers/mmc/host/sdhci.h | 1 +
drivers/mmc/host/sdhci_f_sdh30.c | 435 +++++++++++++++++++++
drivers/mmc/host/sdhci_f_sdh30.h | 40 ++
include/linux/mmc/host.h | 14 +
include/linux/mmc/sdhci.h | 6 +
11 files changed, 561 insertions(+), 5 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt
create mode 100644 drivers/mmc/host/sdhci_f_sdh30.c
create mode 100644 drivers/mmc/host/sdhci_f_sdh30.h
--
1.9.0
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
