On 06/05/2014 07:52 AM, Jaehoon Chung wrote: > dw-mmc controller can support the multiple slot. 'the' can be omitted, /s/slot/slots/ > But, there is not use-case anywhere. So we don't need to support the /s/is not use-case/are no use-cases/ > slot-node for dw-mmc controller. > And "support-highspeed" property in dw-mmc is deprecated. > "support-highspeed" property can be replaced to "cap-sd/mmc-highspeed". > > Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx> [ ... ] > diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt > index 532b1d4..60d90c9 100644 > --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt > +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt > @@ -46,13 +46,14 @@ Required Properties: > - if CIU clock divider value is 0 (that is divide by 1), both tx and rx > phase shift clocks should be 0. > > -Required properties for a slot: > +Required properties for a slot (Deprecated - Support the one slot per host): "Support only one slot per host" ? > > * gpios: specifies a list of gpios used for command, clock and data bus. The > first gpio is the command line and the second gpio is the clock line. The > rest of the gpios (depending on the bus-width property) are the data lines in > no particular order. The format of the gpio specifier depends on the gpio > controller. > + (Deprecated - Refer to Documentaion/devicetree/binding/samsung-pinctrl.txt) Update reference: Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt -- Tushar Behera -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
