Hello.
On 05/04/2014 02:19 AM, Sergei Shtylyov wrote:
I've spent a couple of days with the driver just hanging due to me forgetting
to specify the external crystal frequency, so that clk_get_rate() returned 0
and thus the loop in tmio_mmc_set_clock() never ended. I don't think that's an
acceptable behavior, so I suggest that the minimum frequency is checked for 0
in tmio_mmc_host_probe().
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
---
The patch is against Chris Ball's 'mmc.git' repo's 'master' branch.
I'm still not seeing this patch applied anywhere in this repo... what's
the problem with it?
drivers/mmc/host/tmio_mmc_pio.c | 9 +++++++++
1 file changed, 9 insertions(+)
Index: mmc/drivers/mmc/host/tmio_mmc_pio.c
===================================================================
--- mmc.orig/drivers/mmc/host/tmio_mmc_pio.c
+++ mmc/drivers/mmc/host/tmio_mmc_pio.c
@@ -1044,6 +1044,15 @@ int tmio_mmc_host_probe(struct tmio_mmc_
}
/*
+ * Check the sanity of mmc->f_min to prevent tmio_mmc_set_clock() from
+ * looping forever...
+ */
+ if (mmc->f_min == 0) {
+ ret = -EINVAL;
+ goto pm_disable;
+ }
+
+ /*
* There are 4 different scenarios for the card detection:
* 1) an external gpio irq handles the cd (best for power savings)
* 2) internal sdhi irq handles the cd
WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
