Linux LEDS Development

• Thread Index

• Re: [PATCH 1/2] dt-bindings: leds: Mention GPIO triggers
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• [PATCH v2 2/2] backlight: mp3309c: Add support for MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: Mention GPIO triggers
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH V6 2/3] pinctrl: Add support pin control for UP board CPLD/FPGA
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH V6 3/3] leds: Add support for UP board CPLD onboard LEDS
  • From: "larry.lai" <larry.lai@xxxxxxxxxxxxxxx>
• [PATCH V6 2/3] pinctrl: Add support pin control for UP board CPLD/FPGA
  • From: "larry.lai" <larry.lai@xxxxxxxxxxxxxxx>
• [PATCH V6 0/3] Add support control UP board CPLD/FPGA pin control
  • From: "larry.lai" <larry.lai@xxxxxxxxxxxxxxx>
• [PATCH V6 1/3] mfd: Add support for UP board CPLD/FPGA
  • From: "larry.lai" <larry.lai@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: Mention GPIO triggers
  • From: Rob Herring <robh@xxxxxxxxxx>
• [RESEND PATCH v3] leds: max5970: Add support for max5970
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [PATCH 2/2] leds: triggers: gpio: Rewrite to use trigger-sources
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: linux-stable 6.1.53 kernel crash on COLOR_ID_MULTI handling change
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: Mention GPIO triggers
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• linux-stable 6.1.53 kernel crash on COLOR_ID_MULTI handling change
  • From: Da Xue <da@libre.computer>
• Re: [PATCH 1/2] dt-bindings: leds: Mention GPIO triggers
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: Mention GPIO triggers
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH 2/2] leds: triggers: gpio: Rewrite to use trigger-sources
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 0/2] Rewrite GPIO LED trigger to use trigger-sources
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: leds: Mention GPIO triggers
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2] leds: Mark GPIO LED trigger broken
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH v4 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH v4 4/7] leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH v4 4/7] leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 4/7] leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH v4 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v3 2/2] leds: add ktd202x driver
  • From: André Apitzsch <git@xxxxxxxxxxx>
• [PATCH v3 0/2] leds: Add a driver for KTD202x
  • From: André Apitzsch <git@xxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: leds: Add Kinetic KTD2026/2027 LED
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: media: remove nokia,n900-ir as pwm-ir-tx is compatible
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: leds: Add Kinetic KTD2026/2027 LED
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: add ktd202x driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] dt-bindings: media: remove nokia,n900-ir as pwm-ir-tx is compatible
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: leds: Add Kinetic KTD2026/2027 LED
  • From: André Apitzsch <git@xxxxxxxxxxx>
• [PATCH v2 0/2] leds: Add a driver for KTD202x
  • From: André Apitzsch <git@xxxxxxxxxxx>
• [PATCH v2 2/2] leds: add ktd202x driver
  • From: André Apitzsch <git@xxxxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: media: remove nokia,n900-ir as pwm-ir-tx is compatible
  • From: Sean Young <sean@xxxxxxxx>
• Re: [PATCH v4 2/7] dt-bindings: leds: leds-qcom-lpg: Add support for LPG PPG
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [RESEND PATCH v3] leds: max5970: Add support for max5970
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [PATCH v4 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 4/7] leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• RE: [PATCH v1 2/2] backlight: mp3309c: Add support for MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• [PATCH v4 3/7] soc: qcom: add QCOM PBS driver
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH v4 3/7] soc: qcom: add QCOM PBS driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v4 4/7] leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v4 7/7] leds: rgb: Update PM8350C lpg_data to support two-nvmem PPG Scheme
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v4 0/7] Add support for LUT PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v4 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v4 6/7] leds: rgb: leds-qcom-lpg: Include support for dedicated LUT SDAM PPG Scheme
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v4 1/7] dt-bindings: soc: qcom: Add qcom,pbs bindings
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• RE: [PATCH v1 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• [PATCH v4 2/7] dt-bindings: leds: leds-qcom-lpg: Add support for LPG PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 2/2] backlight: mp3309c: Add support for MPS MP3309C
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• RE: [PATCH v1 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH v1 2/2] backlight: mp3309c: Add support for MPS MP3309C
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v1 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v1 2/2] backlight: mp3309c: Add support for MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• [PATCH v1 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH v5 15/37] ARM: dts: qcom: msm8660: move PMIC interrupts to the board files
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 16/37] ARM: dts: qcom: msm8960: move PMIC interrupts to the board files
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 14/37] ARM: dts: qcom: mdm9615: move PMIC interrupts to the board files
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 13/37] ARM: dts: qcom: apq8064: move PMIC interrupts to the board files
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 36/37] ARM: dts: qcom: ipq8064: drop qcom, prefix from SSBI node name
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v5 37/37] ARM: dts: qcom: mdm9615: drop qcom, prefix from SSBI node name
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v4 03/38] dt-bindings: mfd: qcom-pm8xxx: allow using interrupts-extended
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v5 30/37] ARM: dts: qcom: mdm9615: move RPM regulators to board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 29/37] ARM: dts: qcom: apq8064: move RPM regulators to board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 28/37] ARM: dts: qcom: pm8058: switch to interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 27/37] ARM: dts: qcom: pm8018: switch to interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 26/37] ARM: dts: qcom: pm8921: switch to interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 24/37] ARM: dts: qcom: pm8921: move reg property
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 23/37] ARM: dts: qcom: pm8018: move reg property
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 25/37] ARM: dts: qcom: pm8058: use defined IRQ flags
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 20/37] ARM: dts: qcom: msm8660: split PMIC to separate dtsi files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 21/37] ARM: dts: qcom: pm8058: reorder nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 22/37] ARM: dts: qcom: pm8921: reorder nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 14/37] ARM: dts: qcom: mdm9615: move PMIC interrupts to the board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 18/37] ARM: dts: qcom: apq8064: split PMICs to separate dtsi files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 37/37] ARM: dts: qcom: mdm9615: drop qcom, prefix from SSBI node name
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 35/37] ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 19/37] ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 36/37] ARM: dts: qcom: ipq8064: drop qcom, prefix from SSBI node name
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 17/37] ARM: dts: qcom: msm8960: split PMIC to separate dtsi files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 16/37] ARM: dts: qcom: msm8960: move PMIC interrupts to the board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 33/37] ARM: dts: qcom: msm8974: move regulators to board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 32/37] ARM: dts: qcom: msm8960: drop useless rpm regulators node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 15/37] ARM: dts: qcom: msm8660: move PMIC interrupts to the board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 12/37] ARM: dts: qcom: msm8960: fix PMIC node labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 34/37] ARM: dts: qcom: pm8921: Disable keypad by default
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 31/37] ARM: dts: qcom: msm8660: move RPM regulators to board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 09/37] ARM: dts: qcom: apq8064: fix PMIC node labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 11/37] ARM: dts: qcom: msm8660: fix PMIC node labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 13/37] ARM: dts: qcom: apq8064: move PMIC interrupts to the board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 10/37] ARM: dts: qcom: mdm9615: fix PMIC node labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 08/37] ARM: dts: qcom: strip prefix from PMIC files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 06/37] ARM: dts: qcom: apq8064-nexus7: move sdcc1 node to proper place
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 05/37] ARM: dts: qcom: msm8660-surf: use keypad label directly
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 07/37] ARM: dts: qcom: mdm9615-wp8548-mangoh-green: group include clauses
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 04/37] ARM: dts: qcom: msm8960: introduce label for PMIC keypad
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 02/37] dt-bindings: mfd: qcom-pm8xxx: add missing child nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 03/37] ARM: dts: qcom: apq8064: correct XOADC register address
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 01/37] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v5 00/37] ARM: dts: qcom: cleanup PMIC usage
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 03/38] dt-bindings: mfd: qcom-pm8xxx: allow using interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 03/38] dt-bindings: mfd: qcom-pm8xxx: allow using interrupts-extended
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 03/38] dt-bindings: mfd: qcom-pm8xxx: allow using interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 03/38] dt-bindings: mfd: qcom-pm8xxx: allow using interrupts-extended
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v4 03/38] dt-bindings: mfd: qcom-pm8xxx: allow using interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v4 03/38] dt-bindings: mfd: qcom-pm8xxx: allow using interrupts-extended
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v4 29/38] ARM: dts: qcom: pm8058: switch to interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 28/38] ARM: dts: qcom: pm8018: switch to interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 26/38] ARM: dts: qcom: pm8058: use defined IRQ flags
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 27/38] ARM: dts: qcom: pm8921: switch to interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 24/38] ARM: dts: qcom: pm8018: move reg property
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 25/38] ARM: dts: qcom: pm8921: move reg property
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 21/38] ARM: dts: qcom: msm8660: split PMIC to separate dtsi files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 23/38] ARM: dts: qcom: pm8921: reorder nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 19/38] ARM: dts: qcom: apq8064: split PMICs to separate dtsi files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 38/38] ARM: dts: qcom: mdm9615: drop qcom, prefix from SSBI node name
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 20/38] ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 22/38] ARM: dts: qcom: pm8058: reorder nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 36/38] ARM: dts: qcom: apq8060-dragonboard: rename mpp ADC channels to adc-channel
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 16/38] ARM: dts: qcom: msm8660: move PMIC interrupts to the board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 37/38] ARM: dts: qcom: ipq8064: drop qcom, prefix from SSBI node name
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 17/38] ARM: dts: qcom: msm8960: move PMIC interrupts to the board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 35/38] ARM: dts: qcom: pm8921: Disable keypad by default
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 18/38] ARM: dts: qcom: msm8960: split PMIC to separate dtsi files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 13/38] ARM: dts: qcom: msm8960: fix PMIC node labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 33/38] ARM: dts: qcom: msm8960: drop useless rpm regulators node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 15/38] ARM: dts: qcom: mdm9615: move PMIC interrupts to the board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 34/38] ARM: dts: qcom: msm8974: move regulators to board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 32/38] ARM: dts: qcom: msm8660: move RPM regulators to board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 14/38] ARM: dts: qcom: apq8064: move PMIC interrupts to the board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 31/38] ARM: dts: qcom: mdm9615: move RPM regulators to board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 30/38] ARM: dts: qcom: apq8064: move RPM regulators to board files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 10/38] ARM: dts: qcom: apq8064: fix PMIC node labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 12/38] ARM: dts: qcom: msm8660: fix PMIC node labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 08/38] ARM: dts: qcom: mdm9615-wp8548-mangoh-green: group include clauses
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 09/38] ARM: dts: qcom: strip prefix from PMIC files
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 11/38] ARM: dts: qcom: mdm9615: fix PMIC node labels
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 05/38] ARM: dts: qcom: msm8960: introduce label for PMIC keypad
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 07/38] ARM: dts: qcom: apq8064-nexus7: move sdcc1 node to proper place
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 04/38] ARM: dts: qcom: apq8064: correct XOADC register address
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 03/38] dt-bindings: mfd: qcom-pm8xxx: allow using interrupts-extended
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 06/38] ARM: dts: qcom: msm8660-surf: use keypad label directly
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 02/38] dt-bindings: mfd: qcom-pm8xxx: add missing child nodes
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 01/38] dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [PATCH v4 00/38] ARM: dts: qcom: cleanup PMIC usage
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH v2] leds: Mark GPIO LED trigger broken
  • From: Jan Kundrát <jan.kundrat@xxxxxxxxx>
• Re: [PATCH v3] leds: max5970: Add support for max5970
  • From: Lee Jones <lee@xxxxxxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS baca986e1f2c31f8e4b2a6d99d47c3bc844033e8
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2] leds: max5970: Add support for max5970
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• [PATCH v3] leds: max5970: Add support for max5970
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [PATCH v2] leds: max5970: Add support for max5970
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• [PATCH v2] leds: max5970: Add support for max5970
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [PATCH] leds: max5970: Add support for max5970
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [PATCH] leds: max5970: Add support for max5970
  • From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
• Re: [PATCH] leds: max5970: Add support for max5970
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [PATCH] leds: max5970: Add support for max5970
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [PATCH] leds: max5970: Add support for max5970
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• [PATCH platform-next 0/2] leds: mlxreg: Change behavior during init and remove unused definition
  • From: Vadim Pasternak <vadimp@xxxxxxxxxx>
• [PATCH platform-next 2/2] leds: mlxreg: Skip setting LED color during initialization
  • From: Vadim Pasternak <vadimp@xxxxxxxxxx>
• [PATCH platform-next 1/2] leds: mlxreg: Remove code for amber LED colour
  • From: Vadim Pasternak <vadimp@xxxxxxxxxx>
• Re: [PATCH v3 2/6] leds: turris-omnia: do not use SMBUS calls
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 4/6] leds: turris-omnia: make set_brightness() more efficient
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 5/6] leds: turris-omnia: support HW controlled mode via private trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 6/6] leds: turris-omnia: add support for enabling/disabling HW gamma correction
  • From: Lee Jones <lee@xxxxxxxxxx>
• RE: [PATCH] leds: pca955x: Convert enum->pointer for data in the match tables
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH] leds: pca955x: Convert enum->pointer for data in the match tables
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 6/6] leds: turris-omnia: add support for enabling/disabling HW gamma correction
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v3 5/6] leds: turris-omnia: support HW controlled mode via private trigger
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v3 4/6] leds: turris-omnia: make set_brightness() more efficient
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v3 2/6] leds: turris-omnia: do not use SMBUS calls
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v3 5/6] leds: turris-omnia: support HW controlled mode via private trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH] leds: pca955x: Convert enum->pointer for data in the match tables
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v3 5/6] leds: turris-omnia: support HW controlled mode via private trigger
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH] leds: pca955x: fix -Wvoid-pointer-to-enum-cast warning
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: pca955x: fix -Wvoid-pointer-to-enum-cast warning
  • From: Nathan Chancellor <nathan@xxxxxxxxxx>
• Re: [PATCH] leds: pca955x: fix -Wvoid-pointer-to-enum-cast warning
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 0/3] leds: aw2013: Document interrupt and pull-up supply
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH -next 2/2] leds: Use module_misc_device macro to simplify the code
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH -next 1/2] leds: trigger: netdev: Use module_led_trigger macro to simplify the code
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [RESEND PATCH v3] dt-bindings: leds: Fix reference to definition of default-state
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 6/6] leds: turris-omnia: add support for enabling/disabling HW gamma correction
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 4/6] leds: turris-omnia: make set_brightness() more efficient
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v3 1/6] leds: turris-omnia: drop unnecessary mutex locking
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v3 3/6] leds: turris-omnia: use sysfs_emit() instead of sprintf()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 5/6] leds: turris-omnia: support HW controlled mode via private trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 1/7] dt-bindings: soc: qcom: Add qcom,pbs bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 1/6] leds: turris-omnia: drop unnecessary mutex locking
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 2/6] leds: turris-omnia: do not use SMBUS calls
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 5/6] leds: turris-omnia: support HW controlled mode via private trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: make leds_class a static const structure
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/2] leds: Add driver for mp3326
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 1/7] dt-bindings: soc: qcom: Add qcom,pbs bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: (subset) [PATCH -next] leds: remove redundant of_match_ptr()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: add ktd202x driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v2 2/2] dt-bindings: leds: Add gpio-line-names to PCA9532 GPIO
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v2] leds: trigger: tty: Do not use LED_ON/OFF constants, use led_blink_set_oneshot instead
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] dt-bindings: leds: rohm,bd71828: Drop select:false
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: Fix BUG_ON check for LED_COLOR_ID_MULTI that is always false
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: multicolor: Use rounded division when calculating color components
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] led: trig: timer: stop offloading on deactivation
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v11 0/5] Add a multicolor LED driver for groups of monochromatic LEDs
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [RESEND] [PATCH v11 0/4] Add a multicolor LED driver for groups of monochromatic LEDs
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [RESEND] [PATCH v11 4/4] leds: Add a multicolor LED driver to group monochromatic LEDs
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [RESEND] [PATCH v11 3/4] dt-bindings: leds: Add binding for a multicolor group of LEDs
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH] leds: pca955x: fix -Wvoid-pointer-to-enum-cast warning
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS 179507fcd5e448eaecae9b69f0fb30965c3c4466
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 0/3] leds: aw2013: Document interrupt and pull-up supply
  • From: Nikita Travkin <nikita@xxxxxxx>
• Re: [PATCH v3 4/7] leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH v3 2/7] dt-bindings: leds: leds-qcom-lpg: Add support for LPG PPG
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 1/7] dt-bindings: soc: qcom: Add qcom,pbs bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 2/3] dt-bindings: leds: Document pull-up supply for interrupt and I2C
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 1/3] dt-bindings: leds: aw2013: Document interrupt
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v3 2/3] dt-bindings: leds: Document pull-up supply for interrupt and I2C
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v3 0/3] leds: aw2013: Document interrupt and pull-up supply
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH] leds: pca995x: Fix MODULE_DEVICE_TABLE for OF
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v3 1/3] dt-bindings: leds: aw2013: Document interrupt
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• [PATCH v3 3/3] leds: aw2013: Enable pull-up supply for interrupt and I2C
  • From: Stephan Gerhold <stephan@xxxxxxxxxxx>
• Re: [PATCH v3 6/7] leds: rgb: leds-qcom-lpg: Support two-nvmem PPG Scheme
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v3 4/7] leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH -next 0/2] Simplify the code with declaration-driven macros
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• Re: [PATCH -next 2/2] leds: Use module_misc_device macro to simplify the code
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH -next 1/2] leds: trigger: netdev: Use module_led_trigger macro to simplify the code
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH -next 0/2] Simplify the code with declaration-driven macros
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH -next 1/2] leds: trigger: netdev: Use module_led_trigger macro to simplify the code
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next 2/2] leds: Use module_misc_device macro to simplify the code
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH -next 0/2] Simplify the code with declaration-driven macros
  • From: Li Zetao <lizetao1@xxxxxxxxxx>
• [PATCH v3 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v3 2/7] dt-bindings: leds: leds-qcom-lpg: Add support for LPG PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v3 1/7] dt-bindings: soc: qcom: Add qcom,pbs bindings
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v3 7/7] leds: rgb: Update PM8350C lpg_data to support two-nvmem PPG Scheme
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v3 6/7] leds: rgb: leds-qcom-lpg: Support two-nvmem PPG Scheme
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v3 3/7] soc: qcom: add QCOM PBS driver
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v3 0/7] Add support for LUT PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v3 4/7] leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [RESEND PATCH v3] dt-bindings: leds: Fix reference to definition of default-state
  • From: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
• Re: [PATCH] MAINTAINERS: Add entries for Siemens IPC modules
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH] MAINTAINERS: Add entries for Siemens IPC modules
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/2] pwm: Manage owner assignment implicitly for drivers
  • From: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
• Re: [PATCH v3 0/6] leds: turris-omnia: updates
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH] MAINTAINERS: Add entries for Siemens IPC modules
  • From: Gerd Haeussler <haeussler.gerd@xxxxxxxxx>
• [PATCH] leds: make leds_class a static const structure
  • From: Ivan Orlov <ivan.orlov0322@xxxxxxxxx>
• Re: [PATCH V5 2/3] pinctrl: Add support pin control for UP board CPLD/FPGA
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH V5 2/3] pinctrl: Add support pin control for UP board CPLD/FPGA
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH V5 1/3] mfd: Add support for UP board CPLD/FPGA
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: leds: add mp3326
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 1/2] pwm: Manage owner assignment implicitly for drivers
  • From: Michael Walle <michael@xxxxxxxx>
• [PATCH] leds: pca995x: Fix MODULE_DEVICE_TABLE for OF
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 1/2] pwm: Manage owner assignment implicitly for drivers
  • From: Heiko Stuebner <heiko@xxxxxxxxx>
• [PATCH 2/2] dt-bindings: leds: add mp3326
  • From: "Yuxi (Yuxi) Wang" <Yuxi.Wang@xxxxxxxxxxxxxxxxxxx>
• [PATCH 1/2] leds: Add driver for mp3326
  • From: "Yuxi (Yuxi) Wang" <Yuxi.Wang@xxxxxxxxxxxxxxxxxxx>
• [PATCH -next] leds: remove redundant of_match_ptr()
  • From: Zhu Wang <wangzhu9@xxxxxxxxxx>
• [PATCH V5 1/3] mfd: Add support for UP board CPLD/FPGA
  • From: "larry.lai" <larry.lai@xxxxxxxxxxxxxxx>
• [PATCH V5 3/3] leds: Add support for UP board CPLD onboard LEDS
  • From: "larry.lai" <larry.lai@xxxxxxxxxxxxxxx>
• [PATCH V5 0/3] Add support control UP board CPLD/FPGA pin control
  • From: "larry.lai" <larry.lai@xxxxxxxxxxxxxxx>
• [PATCH V5 2/3] pinctrl: Add support pin control for UP board CPLD/FPGA
  • From: "larry.lai" <larry.lai@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/2] pwm: Manage owner assignment implicitly for drivers
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: add ktd202x driver
  • From: André <git@xxxxxxxxxxx>
• Re: [PATCH v2 2/7] dt-bindings: leds: leds-qcom-lpg: Add support for LPG PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: leds: Add gpio-line-names to PCA9532 GPIO
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• RE: [PATCH v2 1/2] pwm: Manage owner assignment implicitly for drivers
  • From: <nobuhiro1.iwamatsu@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] pwm: Manage owner assignment implicitly for drivers
  • From: Andi Shyti <andi.shyti@xxxxxxxxxx>
• Re: [PATCH v2 1/2] pwm: Manage owner assignment implicitly for drivers
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• Re: [PATCH v2 1/2] pwm: Manage owner assignment implicitly for drivers
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• Re: [PATCH v2 1/2] pwm: Manage owner assignment implicitly for drivers
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v2 0/2] pwm: Manage owner assignment implicitly for drivers
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] pwm: Manage owner assignment implicitly for drivers
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] pwm: Manage owner assignment implicitly for drivers
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH 1/2] pwm: Manage owner assignment implicitly for drivers
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH 0/2] pwm: Manage owner assignment implicitly for drivers
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/7] dt-bindings: leds: leds-qcom-lpg: Add support for LPG PPG
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 5/6] leds: turris-omnia: support HW controlled mode via private trigger
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v3 5/6] leds: turris-omnia: support HW controlled mode via private trigger
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v3 6/6] leds: turris-omnia: add support for enabling/disabling HW gamma correction
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v3 4/6] leds: turris-omnia: make set_brightness() more efficient
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v3 2/6] leds: turris-omnia: do not use SMBUS calls
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v3 3/6] leds: turris-omnia: use sysfs_emit() instead of sprintf()
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v3 1/6] leds: turris-omnia: drop unnecessary mutex locking
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v3 0/6] leds: turris-omnia: updates
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v2] leds: trigger: tty: Do not use LED_ON/OFF constants, use led_blink_set_oneshot instead
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH] leds: trigger: tty: Fix tty trigger when LED's max_brightness is greater than 1
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: rohm,bd71828: Drop select:false
  • From: Matti Vaittinen <mazziesaccount@xxxxxxxxx>
• Re: [PATCH v2 3/7] soc: qcom: add QCOM PBS driver
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH] leds: Fix BUG_ON check for LED_COLOR_ID_MULTI that is always false
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH] leds: trigger: tty: Fix tty trigger when LED's max_brightness is greater than 1
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH] leds: multicolor: Use rounded division when calculating color components
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v2 1/3] leds: turris-omnia: change max brightness from 255 to 1
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v2 3/7] soc: qcom: add QCOM PBS driver
  • From: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
• Re: [PATCH v2 3/7] soc: qcom: add QCOM PBS driver
  • From: Trilok Soni <quic_tsoni@xxxxxxxxxxx>
• Re: [PATCH v2 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [GIT PULL] Immutable branch between pdx86 and LED due for the v6.6 merge window v2
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 3/3] platform/x86: Move all simatic ipc drivers to the subdirectory siemens
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH 2/3] leds: simatic-ipc-leds-gpio: add support for module BX-59A
  • From: xingtong_wu@xxxxxxx
• Re: [PATCH v2 1/2] dt-bindings: gpio: Add gpio-line-names to STMPE GPIO
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH] led: trig: timer: stop offloading on deactivation
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: rohm,bd71828: Drop select:false
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH] dt-bindings: leds: rohm,bd71828: Drop select:false
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [RESEND] [PATCH v11 4/4] leds: Add a multicolor LED driver to group monochromatic LEDs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [RESEND] [PATCH v11 2/4] leds: class: store the color index in struct led_classdev
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [RESEND] [PATCH v11 3/4] dt-bindings: leds: Add binding for a multicolor group of LEDs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [RESEND] [PATCH v11 1/4] leds: provide devm_of_led_get_optional()
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [RESEND] [PATCH v11 0/4] Add a multicolor LED driver for groups of monochromatic LEDs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH] led: trig: timer: stop offloading on deactivation
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] led: trig: timer: stop offloading on deactivation
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH] led: trig: timer: stop offloading on deactivation
  • From: Daniel Golle <daniel@xxxxxxxxxxxxxx>
• Re: (subset) [PATCH] leds: qcom-lpg: Drop assignment to struct pwmchip::base
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 0/3] leds-qcom-flash: several tiny fixes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v2] dt-bindings: leds: Convert Panasonic AN30259A to DT schema
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: ns2: Slightly simplify a memory allocation
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v11 0/5] Add a multicolor LED driver for groups of monochromatic LEDs
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 1/3] leds: turris-omnia: change max brightness from 255 to 1
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 1/3] leds: turris-omnia: change max brightness from 255 to 1
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: Explicitly include correct DT includes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: bcm63138: rename dependency symbol ARCH_BCM4908 to ARCH_BCMBCA
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v2 2/2] leds: simatic-ipc-leds-gpio: add Elkhart Lake version
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: leds: pca995x: Add binding document for PCA995X chips
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH RESEND] Add multicolor support to BlinkM LED driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 3/3] leds: Add Broadchip BCT3024 LED driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: leds: Add binding for Broadchip BCT3024 LED driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: Add vendor prefix for Broadchip Technology Group Co., Ltd.
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] leds: qcom-lpg: Drop assignment to struct pwmchip::base
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 3/3] leds: Add Broadchip BCT3024 LED driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 2/3] dt-bindings: leds: Add binding for Broadchip BCT3024 LED driver
  • From: Matus Gajdos <matuszpd@xxxxxxxxx>
• [PATCH 3/3] leds: Add Broadchip BCT3024 LED driver
  • From: Matus Gajdos <matuszpd@xxxxxxxxx>
• [PATCH 1/3] dt-bindings: Add vendor prefix for Broadchip Technology Group Co., Ltd.
  • From: Matus Gajdos <matuszpd@xxxxxxxxx>
• [PATCH 0/3] leds: Add Broadchip BCT3024 LED driver
  • From: Matus Gajdos <matuszpd@xxxxxxxxx>
• Re: [PATCH v2 0/3] platform/x86: move simatic drivers into subdir
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 3/7] soc: qcom: add QCOM PBS driver
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 3/7] soc: qcom: add QCOM PBS driver
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• Re: [PATCH v2 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 7/7] leds: rgb: Update PM8350C lpg_data to support two-nvmem PPG Scheme
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v2 6/7] leds: rgb: leds-qcom-lpg: Support two-nvmem PPG Scheme
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v2 4/7] leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v2 3/7] soc: qcom: add QCOM PBS driver
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v2 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v2 2/7] dt-bindings: leds: leds-qcom-lpg: Add support for LPG PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v2 0/7] Add support for LUT PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v2 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH 0/7] Add support for LUT PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH v2 0/3] platform/x86: move simatic drivers into subdir
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 2/3] leds: flash: leds-qcom-flash: turn off LED before setting flash current
  • From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
• [PATCH v2 1/3] leds: flash: leds-qcom-flash: declare the driver as a module
  • From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
• [PATCH v2 0/3] leds-qcom-flash: several tiny fixes
  • From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
• [PATCH v2 3/3] leds: flash: leds-qcom-flash: put child node if registration failed
  • From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
• Re: [GIT PULL] Immutable branch between pdx86 and LED due for the v6.6 merge window
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [GIT PULL] Immutable branch between pdx86 and LED due for the v6.6 merge window
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2] dt-bindings: leds: Convert Panasonic AN30259A to DT schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: leds: Add gpio-line-names to PCA9532 GPIO
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: gpio: Add gpio-line-names to STMPE GPIO
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: gpio: Add gpio-line-names to STMPE GPIO
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: gpio: Add gpio-line-names to STMPE GPIO
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: gpio: Add gpio-line-names to STMPE GPIO
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/3] leds: simatic-ipc-leds: default config switch to platform switch
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: gpio: Add gpio-line-names to STMPE GPIO
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH] leds: simatic-ipc-leds-gpio: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: leds: Add gpio-line-names to PCA9532 GPIO
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: gpio: Add gpio-line-names to STMPE GPIO
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: leds: Add gpio-line-names to PCA9532 GPIO
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: gpio: Add gpio-line-names to STMPE GPIO
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH] leds: simatic-ipc-leds-gpio: Convert to platform remove callback returning void
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH] leds: simatic-ipc-leds-gpio: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH AUTOSEL 6.1 02/34] led: qcom-lpg: Fix resource leaks in for_each_available_child_of_node() loops
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.4 02/40] led: qcom-lpg: Fix resource leaks in for_each_available_child_of_node() loops
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH] leds: ns2: Slightly simplify a memory allocation
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/4] video: backlight: lp855x: modernize bindings
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: leds: Add gpio-line-names to PCA9532 GPIO
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: gpio: Add gpio-line-names to STMPE GPIO
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: leds: Add gpio-line-names to PCA9532 GPIO
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: gpio: Add gpio-line-names to STMPE GPIO
  • From: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/3] watchdog: make Siemens Simatic watchdog driver default on platform
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH v2 0/3] platform/x86: move simatic drivers into subdir
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v2 3/3] platform/x86: Move all simatic ipc drivers to the subdirectory siemens
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v2 1/3] watchdog: make Siemens Simatic watchdog driver default on platform
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v2 0/3] platform/x86: move simatic drivers into subdir
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v2 2/3] leds: simatic-ipc-leds: default config switch to platform switch
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: make Siemens Simatic watchdog driver default on platform
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: make Siemens Simatic watchdog driver default on platform
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [GIT PULL] Immutable branch between pdx86 and LED due for the v6.6 merge window
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH 2/3] leds: simatic-ipc-leds: default config switch to platform switch
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v1] led: flash: various minor fixes for leds-qcom-flash driver
  • From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
• Re: [PATCH v1] led: flash: various minor fixes for leds-qcom-flash driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 2/3] leds: simatic-ipc-leds: default config switch to platform switch
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 3/3] platform/x86: Move all simatic ipc drivers to the subdirectory siemens
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: make Siemens Simatic watchdog driver default on platform
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: make Siemens Simatic watchdog driver default on platform
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH 3/3] platform/x86: Move all simatic ipc drivers to the subdirectory siemens
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: make Siemens Simatic watchdog driver default on platform
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: make Siemens Simatic watchdog driver default on platform
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 3/3] platform/x86: Move all simatic ipc drivers to the subdirectory siemens
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH 2/3] leds: simatic-ipc-leds: default config switch to platform switch
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: make Siemens Simatic watchdog driver default on platform
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH 3/3] platform/x86: Move all simatic ipc drivers to the subdirectory siemens
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 2/3] leds: simatic-ipc-leds: default config switch to platform switch
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/3] watchdog: make Siemens Simatic watchdog driver default on platform
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] platform/x86: Move all simatic ipc drivers to the subdirectory siemens
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH 3/3] platform/x86: Move all simatic ipc drivers to the subdirectory siemens
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH 1/3] watchdog: make Siemens Simatic watchdog driver default on platform
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH 0/3] platform/x86: move simatic ipc drivers into subdir
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH 2/3] leds: simatic-ipc-leds: default config switch to platform switch
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v1] led: flash: various minor fixes for leds-qcom-flash driver
  • From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
• [PATCH v11 1/5] devres: provide devm_krealloc_array()
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH v1] led: flash: various minor fixes for leds-qcom-flash driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v11 4/5] dt-bindings: leds: Add binding for a multicolor group of LEDs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v11 5/5] leds: Add a multicolor LED driver to group monochromatic LEDs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v11 2/5] leds: provide devm_of_led_get_optional()
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v11 0/5] Add a multicolor LED driver for groups of monochromatic LEDs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v11 3/5] leds: class: store the color index in struct led_classdev
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v1] led: flash: various minor fixes for leds-qcom-flash driver
  • From: Fenglin Wu <quic_fenglinw@xxxxxxxxxxx>
• Re: [PATCH v10 3/5] leds: class: store the color index in struct led_classdev
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/3] leds: turris-omnia: change max brightness from 255 to 1
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v2 2/3] leds: turris-omnia: initialize multi-intensity to full
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v2 1/3] leds: turris-omnia: change max brightness from 255 to 1
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH] leds: Explicitly include correct DT includes
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] leds: bcm63138: rename dependency symbol ARCH_BCM4908 to ARCH_BCMBCA
  • From: William Zhang <william.zhang@xxxxxxxxxxxx>
• [GIT PULL] Immutable branch between pdx86 and LED due for the v6.6 merge window
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 1/2] platform/x86: simatic-ipc: drop PCI runtime depends and header
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 1/2] platform/x86: simatic-ipc: add another model BX-21A
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS 7a2b85a76b05f16e8e788d035afcacdd4faa1d71
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2 2/3] leds: turris-omnia: initialize multi-intensity to full
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v2 1/3] leds: turris-omnia: change max brightness from 255 to 1
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v2 3/3] leds: turris-omnia: support HW controlled mode via private trigger
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v2 0/3] leds: turris-omnia: updates
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH] leds: bcm63138: rename dependency symbol ARCH_BCM4908 to ARCH_BCMBCA
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH v2 0/2] leds: simatic-ipc-leds-gpio: add new model BX-21A
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: leds: pca995x: Add binding document for PCA995X chips
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v4 2/2] leds: pca995x: Add support for PCA995X chips
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH RESEND] Add multicolor support to BlinkM LED driver
  • From: Joseph Strauss <jstrauss@xxxxxxxxxxx>
• Re: [PATCH v3 2/2] leds: pca995x: Add support for PCA995X chips
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 2/2] leds: simatic-ipc-leds-gpio: fix comment style in SPDX header
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: simatic-ipc-leds-gpio: fix comment style in SPDX header
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: pwm: Fix error code in led_pwm_create_fwnode()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 2/2] leds: pca995x: Add support for PCA995X chips
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] [RFC] dt-bindings: leds: bd2606mvv: Fix maximum register value
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 2/2] led: led-class: Read max-brightness from devicetree
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: leds: Read max-brightness from devicetree
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/1] leds: simatic-ipc-leds-gpio: add new model BX-21A
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 2/2] platform/x86: add CMOS battery monitoring for simatic IPCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v2 2/2] leds: simatic-ipc-leds-gpio: add Elkhart Lake version
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v2 0/2] leds: simatic-ipc-leds-gpio: add new model BX-21A
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v2 1/2] platform/x86: simatic-ipc: add another model BX-21A
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH] leds: ip30: Convert to devm_platform_ioremap_resource()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: cht-wcove: Remove unneeded semicolon
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: aw200xx: Switch back to use struct i2c_driver::probe
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v10 5/5] leds: Add a multicolor LED driver to group monochromatic LEDs
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v10 2/5] leds: provide devm_of_led_get_optional()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v10 3/5] leds: class: store the color index in struct led_classdev
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: simatic-ipc-leds-gpio: restore LEDS_CLASS dependency
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 2/2] platform/x86: add CMOS battery monitoring for simatic IPCs
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 2/2] platform/x86: add CMOS battery monitoring for simatic IPCs
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/2] platform/x86: add CMOS battery monitoring for simatic IPCs
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 2/2] platform/x86: add CMOS battery monitoring for simatic IPCs
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH] leds: aw200xx: Fix error code in probe()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] leds: pwm: Fix an error code
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: pwm: Fix an error code
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/2] leds: simatic-ipc-leds-gpio: fix comment style in SPDX header
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH] leds: pwm: Fix an error code
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: simatic-ipc-leds-gpio: fix comment style in SPDX header
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH] leds: pwm: Fix an error code
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• Re: [PATCH] leds: pwm: Fix error code in led_pwm_create_fwnode()
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] leds: pwm: Fix an error code
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH] leds: pwm: Fix an error code
  • From: Fei Shao <fshao@xxxxxxxxxxxx>
• [PATCH] leds: pwm: Fix error code in led_pwm_create_fwnode()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: Bulk LED API
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] dt-bindings: leds: Convert Panasonic AN30259A to DT schema
  • From: Iskren Chernev <me@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: Convert Panasonic AN30259A to DT schema
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: Convert Panasonic AN30259A to DT schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] dt-bindings: leds: Convert Panasonic AN30259A to DT schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: leds: pca995x: Add binding document for PCA995X chips
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 1/2] platform/x86: simatic-ipc: drop PCI runtime depends and header
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH 2/2] leds: simatic-ipc-leds-gpio: fix comment style in SPDX header
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH 0/2] platform/x86: simatic-ipc: minor cleanups
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: leds: pca995x: Add binding document for PCA995X chips
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v3 2/2] leds: pca995x: Add support for PCA995X chips
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: leds: pca995x: Add binding document for PCA995X chips
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] [RFC] dt-bindings: leds: bd2606mvv: Fix maximum register value
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: pca995x: Add support for PCA995X chips
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: leds: Read max-brightness from devicetree
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/1] leds: simatic-ipc-leds-gpio: add new model BX-21A
  • From: Henning Schild <henning.schild@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: pca995x: Add support for PCA995X chips
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: leds: Read max-brightness from devicetree
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: pca995x: Add support for PCA995X chips
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/2] leds: pca995x: Add support for PCA995X chips
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2 2/2] leds: pca995x: Add support for PCA995X chips
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v2 1/2] dt-bindings: leds: pca995x: Add binding document for PCA995X chips
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH 2/2] leds: pca995x: Add support for PCA995X chips
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2] leds: pca995x: Add support for PCA995X chips
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] [RFC] dt-bindings: leds: bd2606mvv: Fix maximum register value
  • From: Andreas Kemnade <andreas@xxxxxxxxxxxx>
• [PATCH] [RFC] dt-bindings: leds: bd2606mvv: Fix maximum register value
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH 2/2] leds: pca995x: Add support for PCA995X chips
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH 1/2] dt-bindings: leds: pca995x: Add binding document for PCA995X chips
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH] leds: ip30: Convert to devm_platform_ioremap_resource()
  • From: Yangtao Li <frank.li@xxxxxxxx>
• Re: [PATCH v3 2/2] led: led-class: Read max-brightness from devicetree
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• [PATCH v3 2/2] led: led-class: Read max-brightness from devicetree
  • From: Astrid Rost <astrid.rost@xxxxxxxx>
• [PATCH v3 1/2] dt-bindings: leds: Read max-brightness from devicetree
  • From: Astrid Rost <astrid.rost@xxxxxxxx>
• Bulk LED API
  • From: Nicolas Frattaroli <frattaroli.nicolas@xxxxxxxxx>
• Re: [PATCH v2 1/2] led: led-class: Read max-brightness from devicetree
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH v2 1/2] led: led-class: Read max-brightness from devicetree
  • From: Astrid Rost <astridr@xxxxxxxx>
• Re: [PATCH v2 1/2] led: led-class: Read max-brightness from devicetree
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: leds: leds-qcom-lpg: Add support for LUT through NVMEM devices
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v2 1/2] led: led-class: Read max-brightness from devicetree
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: leds: Read max-brightness from devicetree
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: leds: Read max-brightness from devicetree
  • From: Astrid Rost <astrid.rost@xxxxxxxx>
• [PATCH v2 1/2] led: led-class: Read max-brightness from devicetree
  • From: Astrid Rost <astrid.rost@xxxxxxxx>
• Re: [PATCH v1 2/2] dt: bindings: lp50xx: Add max-brightness as in leds-pwm
  • From: Astrid Rost <astridr@xxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH v1 2/2] dt: bindings: lp50xx: Add max-brightness as in leds-pwm
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 1/2] led: leds-lp50xx: Add max-brightness as in leds-pwm
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/2] dt: bindings: lp50xx: Add max-brightness as in leds-pwm
  • From: Astrid Rost <astrid.rost@xxxxxxxx>
• [PATCH v1 1/2] led: leds-lp50xx: Add max-brightness as in leds-pwm
  • From: Astrid Rost <astrid.rost@xxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS 877e91191ccf0782ae18c5dfa7522fb1e5bfba8c
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH 3/7] soc: qcom: add QCOM PBS driver
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: leds: leds-qcom-lpg: Add support for LUT through NVMEM devices
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH] leds: cht-wcove: Remove unneeded semicolon
  • From: baomingtong001@xxxxxxxxxx
• [lee-leds:for-leds-next] BUILD SUCCESS 7bd932d9adbcc5c5370d968bdb0b00385606bf3a
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v9 5/5] leds: Add a multicolor LED driver to group monochromatic LEDs
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/3] backlight: lm3630a: add support for changing the boost frequency
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH] leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH] leds: aw200xx: Switch back to use struct i2c_driver::probe
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 0/7] Add support for LUT PPG
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH 3/7] soc: qcom: add QCOM PBS driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 3/7] soc: qcom: add QCOM PBS driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: leds: leds-qcom-lpg: Add support for LUT through NVMEM devices
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v10 4/5] dt-bindings: leds: Add binding for a multicolor group of LEDs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v10 0/5] Add a multicolor LED driver for groups of monochromatic LEDs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v10 3/5] leds: class: store the color index in struct led_classdev
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v10 2/5] leds: provide devm_of_led_get_optional()
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v10 5/5] leds: Add a multicolor LED driver to group monochromatic LEDs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v10 1/5] devres: provide devm_krealloc_array()
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH] leds: simatic-ipc-leds-gpio: restore LEDS_CLASS dependency
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH] leds: aw200xx: Fix error code in probe()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: backlight: document new property default-brightness-level
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH] leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: backlight: document new property default-brightness-level
  • From: Alexandru Ardelean <alex@xxxxxxxxxxx>
• Re: [net-next PATCH] docs: ABI: sysfs-class-led-trigger-netdev: add new modes and entry
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH 2/2] leds: add ktd202x driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v9 5/5] leds: Add a multicolor LED driver to group monochromatic LEDs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH] leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks
  • From: Nick Desaulniers <ndesaulniers@xxxxxxxxxx>
• [PATCH] leds: leds-mt6323: Adjust return/parameter types in wled get/set callbacks
  • From: Nathan Chancellor <nathan@xxxxxxxxxx>
• Re: [net-next PATCH] docs: ABI: sysfs-class-led-trigger-netdev: add new modes and entry
  • From: Andrew Lunn <andrew@xxxxxxx>
• [net-next PATCH] docs: ABI: sysfs-class-led-trigger-netdev: add new modes and entry
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v3 8/8] leds: leds-mt6323: Add support for WLEDs and MT6332
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: backlight: document new property default-brightness-level
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [net-next PATCH v5 0/3] leds: trigger: netdev: add additional modes
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH v2 2/2] backlight: gpio_backlight: add new property default-brightness-level
  • From: Alexandru Ardelean <alex@xxxxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: backlight: document new property default-brightness-level
  • From: Alexandru Ardelean <alex@xxxxxxxxxxx>
• Re: [PATCH v3 8/8] leds: leds-mt6323: Add support for WLEDs and MT6332
  • From: Nathan Chancellor <nathan@xxxxxxxxxx>
• Re: [PATCH 2/7] dt-bindings: leds: leds-qcom-lpg: Add support for LUT through NVMEM devices
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v9 5/5] leds: Add a multicolor LED driver to group monochromatic LEDs
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH 7/7] leds: rgb: Update PM8350C lpg_data to support two-nvmem PPG Scheme
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 3/7] soc: qcom: add QCOM PBS driver
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 6/7] leds: rgb: leds-qcom-lpg: Support two-nvmem PPG Scheme
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 4/7] leds: rgb: leds-qcom-lpg: Add support for LUT pattern through single SDAM
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 2/7] dt-bindings: leds: leds-qcom-lpg: Add support for LUT through NVMEM devices
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 0/7] Add support for LUT PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 1/7] dt-bindings: soc: qcom: Add qcom-pbs bindings
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH 2/2] leds: sgm3140: Add richtek,rt5033-led compatible
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [RESEND PATCH 1/2] dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
  • From: Raymond Hackley <raymondhackley@xxxxxxxxxxxxxx>
• Re: [RESEND PATCH 1/2] dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
  • From: Raymond Hackley <raymondhackley@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
  • From: Raymond Hackley <raymondhackley@xxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks"
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [net-next PATCH v4 0/3] leds: trigger: netdev: add additional modes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: sgm3140: Document richtek,rt5033 compatible
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [net-next PATCH v5 1/3] leds: trigger: netdev: add additional specific link speed mode
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [net-next PATCH v5 3/3] leds: trigger: netdev: expose hw_control status via sysfs
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [net-next PATCH v5 2/3] leds: trigger: netdev: add additional specific link duplex mode
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [net-next PATCH v5 3/3] leds: trigger: netdev: expose hw_control status via sysfs
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v4 0/3] leds: trigger: netdev: add additional modes
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v4 0/3] leds: trigger: netdev: add additional modes
  • From: Lee Jones <lee@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 47045630bc409ce6606d97b790895210dd1d517d
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [net-next PATCH v4 0/3] leds: trigger: netdev: add additional modes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 2/3] leds: trigger: netdev: add additional specific link duplex mode
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 3/3] leds: trigger: netdev: expose hw_control status via sysfs
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 1/3] leds: trigger: netdev: add additional specific link speed mode
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v5 0/3] leds: trigger: netdev: add additional modes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v4 0/3] leds: trigger: netdev: add additional modes
  • From: Simon Horman <simon.horman@xxxxxxxxxxxx>
• Re: [net-next PATCH v4 0/3] leds: trigger: netdev: add additional modes
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v4 0/3] leds: trigger: netdev: add additional modes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: Add Kinetic KTD2026/2027 LED
  • From: André <git@xxxxxxxxxxx>
• Re: [net-next PATCH v4 3/3] leds: trigger: netdev: expose hw_control status via sysfs
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v4 2/3] leds: trigger: netdev: add additional specific link duplex mode
  • From: Andrew Lunn <andrew@xxxxxxx>
• [net-next PATCH v4 3/3] leds: trigger: netdev: expose hw_control status via sysfs
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v4 2/3] leds: trigger: netdev: add additional specific link duplex mode
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v4 1/3] leds: trigger: netdev: add additional specific link speed mode
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v4 0/3] leds: trigger: netdev: add additional modes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: Add Kinetic KTD2026/2027 LED
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/2] leds: add ktd202x driver
  • From: André Apitzsch <git@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: leds: Add Kinetic KTD2026/2027 LED
  • From: André Apitzsch <git@xxxxxxxxxxx>
• [PATCH 0/2] leds: Add a driver for KTD202x
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: backlight: lm3630a: add entries to control boost frequency
  • From: Maximilian Weigand <mweigand@xxxxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: backlight: lm3630a: add entries to control boost frequency
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: backlight: lm3630a: add entries to control boost frequency
  • From: Heiko Stübner <heiko@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: backlight: lm3630a: add entries to control boost frequency
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION f7efed9f38f886edb450041b82a6f15d663c98f8
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/4] video: backlight: lp855x: get PWM for PWM mode during probe
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/4] video: backlight: lp855x: get PWM for PWM mode during probe
  • From: Artur Weber <aweber.kernel@xxxxxxxxx>
• [PATCH v9 2/5] leds: provide devm_of_led_get_optional()
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v9 0/5] Add a multicolor LED driver for groups of monochromatic LEDs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v9 3/5] leds: class: store the color index in struct led_classdev
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v9 5/5] leds: Add a multicolor LED driver to group monochromatic LEDs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v9 4/5] dt-bindings: leds: Add binding for a multicolor group of LEDs
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [PATCH v9 1/5] devres: provide devm_krealloc_array()
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 925294c9aa184801cc0a451b69a18dd0fe7d847d
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: (subset) [PATCH v2 0/4] video: backlight: lp855x: modernize bindings
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: drop unneeded quotes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: fix config reference for AW200xx driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 net-next resend] leds: trigger: netdev: uninitialized variable in netdev_trig_activate()
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [PATCH 2/3] dt-bindings: backlight: lm3630a: add entries to control boost frequency
  • From: Maximilian Weigand <mweigand2017@xxxxxxxxx>
• [PATCH 3/3] arm64: dts: rockchip: shift boost frequency for rk3566-pinenote backlight
  • From: Maximilian Weigand <mweigand2017@xxxxxxxxx>
• [PATCH 1/3] backlight: lm3630a: add support for changing the boost frequency
  • From: Maximilian Weigand <mweigand2017@xxxxxxxxx>
• [PATCH 0/3] backlight: lm3630a: add functionality to change boost converter frequency
  • From: Maximilian Weigand <mweigand2017@xxxxxxxxx>
• [linux-next:master] BUILD REGRESSION b16049b21162bb649cdd8519642a35972b7910fe
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 net-next resend] leds: trigger: netdev: uninitialized variable in netdev_trig_activate()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 2/4] video: backlight: lp855x: get PWM for PWM mode during probe
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 3/8] dt-bindings: leds: leds-mt6323: Support WLED output
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH v2 net-next resend] leds: trigger: netdev: uninitialized variable in netdev_trig_activate()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 led] leds: trigger: netdev: uninitialized variable in netdev_trig_activate()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v2 led] leds: trigger: netdev: uninitialized variable in netdev_trig_activate()
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v3 2/2] leds: trigger: netdev: add additional specific link duplex mode
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: (subset) [PATCH v2 0/4] video: backlight: lp855x: modernize bindings
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 1f6ce8392d6ff486af5ca96df9ded5882c4b6977
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks"
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH] dt-bindings: backlight: kinetic,ktz8866: Add missing type for "current-num-sinks"
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 3/8] dt-bindings: leds: leds-mt6323: Support WLED output
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v2 led] leds: trigger: netdev: uninitialized variable in netdev_trig_activate()
  • From: Dan Carpenter <dan.carpenter@xxxxxxxxxx>
• Re: [PATCH v4 1/4] leds: simatic-ipc-leds-gpio: add terminating entries to gpio tables
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v4 1/4] leds: simatic-ipc-leds-gpio: add terminating entries to gpio tables
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v3 1/2] leds: trigger: netdev: add additional specific link speed mode
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v3 2/2] leds: trigger: netdev: add additional specific link duplex mode
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v3 0/2] leds: trigger: netdev: add additional modes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v2 2/2] leds: trigger: netdev: add additional specific link duplex mode
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v2 2/2] leds: trigger: netdev: add additional specific link duplex mode
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 1/2] leds: trigger: netdev: add additional specific link speed mode
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH v2 2/2] leds: trigger: netdev: add additional specific link duplex mode
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v2 1/2] leds: trigger: netdev: add additional specific link speed mode
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v2 0/2] leds: trigger: netdev: add additional modes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 53ab6975c12d1ad86c599a8927e8c698b144d669
  • From: kernel test robot <lkp@xxxxxxxxx>