Re: [PATCH v2 09/11] leds: aw200xx: add support for aw20108 device

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 18, 2023 at 9:30 PM Dmitry Rokosov
<ddrokosov@xxxxxxxxxxxxxxxxx> wrote:
>
> From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
>
> Add support for Awinic aw20108 device from the same LED drivers famliy.

family

> New device supports 108 leds using matrix of 12x9 outputs.

LEDs
a matrix

...

> -         This option enables support for the AW20036/AW20054/AW20072 LED driver.
> -         It is a 3x12/6x9/6x12 matrix LED driver programmed via
> -         an I2C interface, up to 36/54/72 LEDs or 12/18/24 RGBs,
> +         This option enables support for the AW20036/AW20054/AW20072/AW20108
> +         LED driver. It is a 3x12/6x9/6x12/9x12 matrix LED driver programmed via
> +         an I2C interface, up to 36/54/72/108 LEDs or 12/18/24/36 RGBs,
>           3 pattern controllers for auto breathing or group dimming control.

For better maintenance I always suggest in the cases like this to
convert help to provide a list of the supported devices, like:

  This option enables support for the following Awinic LED drivers:
    - AW20036 (3x12)
    - ...
   ...

And if any new comes to this, it will be just a one liner change.

--
With Best Regards,
Andy Shevchenko




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux