Linux LEDS Development

• Thread Index

• Re: [PATCH 1/2] leds: tca6507: Use devm_gpiochip_add_data() to simplify remove path
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v7 0/2] backlight: mp3309c: Add support for MPS MP3309C
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v1 1/4] leds: trigger: gpio: Replace custom code for gpiod_get_optional()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v1 2/4] leds: trigger: gpio: Convert to use kstrtox()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v1 2/4] leds: trigger: gpio: Convert to use kstrtox()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v5] leds: max5970: Add support for max5970
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [RESEND PATCH v3] leds: max5970: Add support for max5970
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: leds: add 'internet' and 'signal' function definitions
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v1 2/4] leds: trigger: gpio: Convert to use kstrtox()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: aw2013: Select REGMAP_I2C
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: Expand led_colors[] array
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v8 0/5] leds: Allwinner A100 LED controller support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 102/108] leds: qcom-lpg: Make use of devm_pwmchip_alloc() function
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 102/108] leds: qcom-lpg: Make use of devm_pwmchip_alloc() function
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 102/108] leds: qcom-lpg: Make use of devm_pwmchip_alloc() function
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [RESEND PATCH v2] leds: syscon: Support 'reg' in addition to 'offset' for register address
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] dt-bindings: leds: Fix JSON pointer in max-brightness
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [RESEND PATCH v2] leds: syscon: Support 'reg' in addition to 'offset' for register address
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: Fix JSON pointer in max-brightness
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [RESEND PATCH v2] leds: syscon: Support 'reg' in addition to 'offset' for register address
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] dt-bindings: leds: Fix JSON pointer in max-brightness
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v6 2/7] dt-bindings: leds: leds-qcom-lpg: Add support for LPG PPG
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH v3 102/108] leds: qcom-lpg: Make use of devm_pwmchip_alloc() function
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 102/108] leds: qcom-lpg: Make use of devm_pwmchip_alloc() function
  • From: Thierry Reding <thierry.reding@xxxxxxxxx>
• Re: [PATCH v3 102/108] leds: qcom-lpg: Make use of devm_pwmchip_alloc() function
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [RESEND PATCH v3] leds: max5970: Add support for max5970
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: class: Don't expose color sysfs entry
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] Revert "leds: class: Store the color index in struct led_classdev"
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [Patch v8 6/6] leds: ledtrig-tty: add additional line state evaluation
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH V2 1/2] leds: gpio: Add kernel log if devm_fwnode_gpiod_get fails
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [Patch v8 6/6] leds: ledtrig-tty: add additional line state evaluation
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v4 10/11] dt-bindings: leds: awinic,aw200xx: add AW20108 device
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v4 06/11] leds: aw200xx: add delay after software reset
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v4 05/11] dt-bindings: leds: aw200xx: remove property "awinic,display-rows"
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v4 11/11] dt-bindings: leds: aw200xx: fix led pattern and add reg constraints
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v4 04/11] leds: aw200xx: calculate dts property display_rows in the driver
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v4 02/11] leds: aw200xx: support HWEN hardware control
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v4 09/11] leds: aw200xx: add support for aw20108 device
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v4 08/11] leds: aw200xx: improve autodim calculation method
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v4 00/11] leds: aw200xx: several driver updates
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v4 01/11] leds: aw200xx: fix write to DIM parameter
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v4 07/11] leds: aw200xx: enable disable_locking flag in regmap config
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v4 03/11] dt-bindings: leds: aw200xx: introduce optional enable-gpios property
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] leds: class: Don't expose color sysfs entry
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH] leds: class: Don't expose color sysfs entry
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH] Revert "leds: class: Store the color index in struct led_classdev"
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [RESEND PATCH v3] leds: max5970: Add support for max5970
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [PATCH v3 102/108] leds: qcom-lpg: Make use of devm_pwmchip_alloc() function
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [RESEND PATCH v3] leds: max5970: Add support for max5970
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [Patch v8 6/6] leds: ledtrig-tty: add additional line state evaluation
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 102/108] leds: qcom-lpg: Make use of devm_pwmchip_alloc() function
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: Fwd: sysfs: cannot create duplicate filename .../system76_acpi::kbd_backlight/color
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] Revert "leds: class: Store the color index in struct led_classdev"
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH] Revert "leds: class: Store the color index in struct led_classdev"
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: Fwd: sysfs: cannot create duplicate filename .../system76_acpi::kbd_backlight/color
  • From: Takashi Iwai <tiwai@xxxxxxx>
• [PATCH v3 102/108] leds: qcom-lpg: Make use of devm_pwmchip_alloc() function
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v3 000/108] pwm: Fix lifetime issues for pwm_chips
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
• Re: Fwd: sysfs: cannot create duplicate filename .../system76_acpi::kbd_backlight/color
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Fwd: sysfs: cannot create duplicate filename .../system76_acpi::kbd_backlight/color
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
• Re: Fwd: sysfs: cannot create duplicate filename .../system76_acpi::kbd_backlight/color
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: Fwd: sysfs: cannot create duplicate filename .../system76_acpi::kbd_backlight/color
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Fwd: sysfs: cannot create duplicate filename .../system76_acpi::kbd_backlight/color
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: Fwd: sysfs: cannot create duplicate filename .../system76_acpi::kbd_backlight/color
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: Fwd: sysfs: cannot create duplicate filename .../system76_acpi::kbd_backlight/color
  • From: Thorsten Leemhuis <regressions@xxxxxxxxxxxxx>
• Re: [Patch v8 1/6] tty: add new helper function tty_get_tiocm
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Fwd: sysfs: cannot create duplicate filename .../system76_acpi::kbd_backlight/color
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH V2 1/2] leds: gpio: Add kernel log if devm_fwnode_gpiod_get fails
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH V2 1/2] leds: gpio: Add kernel log if devm_fwnode_gpiod_get fails
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH V2 1/2] leds: gpio: Add kernel log if devm_fwnode_gpiod_get fails
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v3] leds: max5970: Add support for max5970
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Describing LEDs roles in device tree?
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [Patch v8 6/6] leds: ledtrig-tty: add additional line state evaluation
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [Patch v8 1/6] tty: add new helper function tty_get_tiocm
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH v3 00/11] leds: aw200xx: several driver updates
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 04/11] leds: aw200xx: calculate dts property display_rows in the driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v5 1/4] pwm: rename pwm_apply_state() to pwm_apply_cansleep()
  • From: Sean Young <sean@xxxxxxxx>
• [PATCH V2 2/2] ARM: dts: bcm2711-rpi-400: Fix delete-node of led_act
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• [PATCH V2 0/2] ARM: dts: bcm2711-rpi-400: Fix delete-node of led_act
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• [PATCH V2 1/2] leds: gpio: Add kernel log if devm_fwnode_gpiod_get fails
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH 1/2] leds: gpio: Add kernel log if devm_fwnode_gpiod_get fails
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH v2 0/2] leds: add more LED color and function definitions
  • From: Shiji Yang <yangshiji66@xxxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION eff99d8edbed7918317331ebd1e365d8e955d65e
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [RESEND PATCH v7 2/5] leds: sun50i-a100: New driver for the A100 LED controller
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 0/2] leds: add more LED color and function definitions
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3] dt-bindings: leds: add 'internet' and 'signal' function definitions
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [RESEND PATCH v3] leds: max5970: Add support for max5970
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [Patch v8 6/6] leds: ledtrig-tty: add additional line state evaluation
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH 2/2] leds: tca6507: Use devm_led_classdev_register() to simplify remove path
  • From: Andrew Davis <afd@xxxxxx>
• [PATCH 1/2] leds: tca6507: Use devm_gpiochip_add_data() to simplify remove path
  • From: Andrew Davis <afd@xxxxxx>
• Re: [PATCH v7 1/2] dt-bindings: backlight: mp3309c: remove two required properties
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• [PATCH v7 0/2] backlight: mp3309c: Add support for MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• [PATCH v7 2/2] backlight: mp3309c: Add support for MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• [PATCH v7 1/2] dt-bindings: backlight: mp3309c: remove two required properties
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH v6 1/2] dt-bindings: backlight: mp3309c: remove two required properties
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH v6 2/2] backlight: mp3309c: Add support for MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• [PATCH v6 0/2] backlight: mp3309c: Add support for MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• [PATCH v6 1/2] dt-bindings: backlight: mp3309c: remove two required properties
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH V7 0/3] Add support control UP board CPLD/FPGA pin control
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH V7 2/3] pinctrl: Add support pin control for UP board CPLD/FPGA
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH V7 1/3] mfd: Add support for UP board CPLD/FPGA
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH V7 2/3] pinctrl: Add support pin control for UP board CPLD/FPGA
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• RE: [PATCH v2 1/1] dt-bindings: backlight: mp3309c: remove two required properties
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH v2 1/1] dt-bindings: backlight: mp3309c: remove two required properties
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH V7 2/3] pinctrl: Add support pin control for UP board CPLD/FPGA
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION d173336e238b0f7f5b7eddfa641d7c25c24bb86a
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2] leds: add mp3326 driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 8728c14129df7a6e29188a2e737b4774fb200953
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: PSA: This list is being migrated (no action required)
  • From: Konstantin Ryabitsev <konstantin@xxxxxxxxxxxxxxxxxxx>
• PSA: This list is being migrated (no action required)
  • From: Konstantin Ryabitsev <konstantin@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/8] leds: nic78bx: explicitly unregister LEDs at module's shutdown
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• Re: [Patch v8 6/6] leds: ledtrig-tty: add additional line state evaluation
  • From: m.brock@xxxxxxxxxxxxx
• Re: [RESEND PATCH v3] leds: max5970: Add support for max5970
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• [Patch v8 5/6] leds: ledtrig-tty: make rx tx activitate configurable
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [Patch v8 6/6] leds: ledtrig-tty: add additional line state evaluation
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [Patch v8 0/6] ledtrig-tty: add additional tty state evaluation
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [Patch v8 3/6] leds: ledtrig-tty: change logging if get icount failed
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [Patch v8 4/6] leds: ledtrig-tty: replace mutex with completion
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [Patch v8 1/6] tty: add new helper function tty_get_tiocm
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [Patch v8 2/6] leds: ledtrig-tty: free allocated ttyname buffer on deactivate
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH v4] dt-bindings: leds: add 'internet' and 'signal' function definitions
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: add mps mp3326 LED
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH 1/2] dt-bindings: leds: add mps mp3326 LED
  • From: "Yuxi (Yuxi) Wang" <Yuxi.Wang@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: add mps mp3326 LED
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: add mps mp3326 LED
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 2/2] leds: add mp3326 driver
  • From: Yuxi Wang <wyx137120466@xxxxxxxxx>
• [PATCH 1/2] dt-bindings: leds: add mps mp3326 LED
  • From: Yuxi Wang <wyx137120466@xxxxxxxxx>
• [PATCH 0/2] leds: add mp3326 driver
  • From: Yuxi Wang <wyx137120466@xxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: leds: add "internet" and "rssi" function definitions
  • From: Rani Hod <rani.hod@xxxxxxxxx>
• Re: [PATCH v3 03/11] dt-bindings: leds: aw200xx: introduce optional enable-gpios property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [Patch v2] leds: ledtrig-tty: free allocated ttyname buffer on deactivate
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] leds: ledtrig-tty: free allocated ttyname buffer on deactivate
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• PSA: migrating linux-leds to new vger infrastructure
  • From: Konstantin Ryabitsev <konstantin@xxxxxxxxxxxxxxxxxxx>
• [Patch v2] leds: ledtrig-tty: free allocated ttyname buffer on deactivate
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH] leds: ledtrig-tty: free allocated ttyname buffer on deactivate
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [Patch v7 6/6] leds: ledtrig-tty: add additional line state evaluation
  • From: m.brock@xxxxxxxxxxxxx
• [PATCH] leds: ledtrig-tty: free allocated ttyname buffer on deactivate
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: Fwd: sysfs: cannot create duplicate filename .../system76_acpi::kbd_backlight/color
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• Re: [Patch v7 2/6] leds: ledtrig-tty: free allocated ttyname buffer on deactivate
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [Patch v7 2/6] leds: ledtrig-tty: free allocated ttyname buffer on deactivate
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• [Patch v7 6/6] leds: ledtrig-tty: add additional line state evaluation
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [Patch v7 0/6] ledtrig-tty: add additional tty state evaluation
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [Patch v7 2/6] leds: ledtrig-tty: free allocated ttyname buffer on deactivate
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [Patch v7 1/6] tty: add new helper function tty_get_tiocm
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [Patch v7 4/6] leds: ledtrig-tty: replace mutex with completion
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [Patch v7 5/6] leds: ledtrig-tty: make rx tx activitate configurable
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [Patch v7 3/6] leds: ledtrig-tty: change logging if get icount failed
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH 1/2] leds: gpio: Add kernel log if devm_fwnode_gpiod_get fails
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] leds: ledtrig-tty: add new line mode evaluation
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH 2/8] leds: nic78bx: explicitly unregister LEDs at module's shutdown
  • From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
• Re: [PATCH 0/8] devm_led_classdev_register() usage problem
  • From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
• [PATCH v4] dt-bindings: leds: add 'internet' and 'signal' function definitions
  • From: Shiji Yang <yangshiji66@xxxxxxxxxxx>
• [PATCH 1/2] leds: gpio: Add kernel log if devm_fwnode_gpiod_get fails
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• [PATCH 2/2] ARM: dts: bcm2711-rpi-400: Fix delete-node of led_act
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• [PATCH 0/2] ARM: dts: bcm2711-rpi-400: Fix delete-node of led_act
  • From: Stefan Wahren <wahrenst@xxxxxxx>
• Re: [PATCH v1 4/4] leds: trigger: gpio: Convert to DEVICE_ATTR_RW()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v1 2/4] leds: trigger: gpio: Convert to use kstrtox()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v1 1/4] leds: trigger: gpio: Replace custom code for gpiod_get_optional()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v1 3/4] leds: trigger: gpio: Use sysfs_emit() to instead of s*printf()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH] leds: triggers: netdev: add a check, whether device is up
  • From: Klaus Kudielka <klaus.kudielka@xxxxxxxxx>
• Re: [PATCH] leds: triggers: netdev: add a check, whether device is up
  • From: Klaus Kudielka <klaus.kudielka@xxxxxxxxx>
• Re: [PATCH] leds: triggers: netdev: add a check, whether device is up
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v5 2/2] leds: ledtrig-tty: add new line mode evaluation
  • From: m.brock@xxxxxxxxxxxxx
• Re: [Patch v6 3/7] leds: ledtrig-tty: free allocated ttyname buffer on deactivate
  • From: m.brock@xxxxxxxxxxxxx
• [PATCH] leds: triggers: netdev: add a check, whether device is up
  • From: Klaus Kudielka <klaus.kudielka@xxxxxxxxx>
• Re: Fwd: sysfs: cannot create duplicate filename .../system76_acpi::kbd_backlight/color
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS b9604be241587fb29c0f40450e53d0a37dc611b5
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 0/8] devm_led_classdev_register() usage problem
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• [PATCH v1 3/4] leds: trigger: gpio: Use sysfs_emit() to instead of s*printf()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/4] leds: trigger: gpio: Replace custom code for gpiod_get_optional()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/4] leds: trigger: gpio: Convert to use kstrtox()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 4/4] leds: trigger: gpio: Convert to DEVICE_ATTR_RW()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH] leds: aw2013: Select REGMAP_I2C
  • From: Nikita Travkin <nikita@xxxxxxx>
• [PATCH] leds: aw2013: Select REGMAP_I2C
  • From: Dang Huynh <danct12@xxxxxxxxxx>
• [PATCH v3] dt-bindings: leds: add 'internet' and 'signal' function definitions
  • From: Shiji Yang <yangshiji66@xxxxxxxxxxx>
• Re: [PATCH v3 11/11] dt-bindings: leds: aw200xx: fix led pattern and add reg constraints
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 11/11] dt-bindings: leds: aw200xx: fix led pattern and add reg constraints
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 11/11] dt-bindings: leds: aw200xx: fix led pattern and add reg constraints
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 11/11] dt-bindings: leds: aw200xx: fix led pattern and add reg constraints
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 11/11] dt-bindings: leds: aw200xx: fix led pattern and add reg constraints
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 11/11] dt-bindings: leds: aw200xx: fix led pattern and add reg constraints
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: leds: add "internet" and "rssi" function definitions
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v3 02/11] leds: aw200xx: support HWEN hardware control
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v3 09/11] leds: aw200xx: add support for aw20108 device
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v3 11/11] dt-bindings: leds: aw200xx: fix led pattern and add reg constraints
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v3 10/11] dt-bindings: leds: awinic,aw200xx: add AW20108 device
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v3 07/11] leds: aw200xx: enable disable_locking flag in regmap config
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v3 08/11] leds: aw200xx: improve autodim calculation method
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v3 06/11] leds: aw200xx: add delay after software reset
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v3 05/11] dt-bindings: leds: aw200xx: remove property "awinic,display-rows"
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v3 03/11] dt-bindings: leds: aw200xx: introduce optional enable-gpios property
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v3 04/11] leds: aw200xx: calculate dts property display_rows in the driver
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v3 00/11] leds: aw200xx: several driver updates
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v3 01/11] leds: aw200xx: fix write to DIM parameter
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v3 02/11] leds: aw200xx: support HWEN hardware control
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] leds: core: add missing LED color strings
  • From: Jisheng Zhang <jszhang@xxxxxxxxxx>
• Re: [PATCH V7 3/3] leds: Add support for UP board CPLD onboard LEDS
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH V7 2/3] pinctrl: Add support pin control for UP board CPLD/FPGA
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: leds: sort LED color definitions by alphabet
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: leds: add "internet" and "rssi" function definitions
  • From: Shiji Yang <yangshiji66@xxxxxxxxxxx>
• Re: [PATCH v6 3/7] soc: qcom: add QCOM PBS driver
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] dt-bindings: leds: add "internet" and "rssi" function definitions
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: leds: sort LED color definitions by alphabet
  • From: Shiji Yang <yangshiji66@xxxxxxxxxxx>
• [PATCH v2 2/2] dt-bindings: leds: add "internet" and "rssi" function definitions
  • From: Shiji Yang <yangshiji66@xxxxxxxxxxx>
• [PATCH v2 1/2] leds: core: add missing LED color strings
  • From: Shiji Yang <yangshiji66@xxxxxxxxxxx>
• [PATCH v2 0/2] leds: add more LED color and function definitions
  • From: Shiji Yang <yangshiji66@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: add mps mp3326 LED
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/3] dt-bindings: leds: sort LED color definitions by alphabet
  • From: Rob Herring <robh+dt@xxxxxxxxxx>
• [PATCH 2/3] leds: core: add missing LED color strings
  • From: Shiji Yang <yangshiji66@xxxxxxxxxxx>
• [PATCH 3/3] dt-bindings: leds: Add "internet" and "rssi" function definitions
  • From: Shiji Yang <yangshiji66@xxxxxxxxxxx>
• [PATCH 1/3] dt-bindings: leds: sort LED color definitions by alphabet
  • From: Shiji Yang <yangshiji66@xxxxxxxxxxx>
• [PATCH 0/3] add more LED color and function definitions
  • From: Shiji Yang <yangshiji66@xxxxxxxxxxx>
• Re: [PATCH 2/2] leds: add mp3326 driver
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: add mps mp3326 LED
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [RESEND PATCH v7 2/5] leds: sun50i-a100: New driver for the A100 LED controller
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 0/2] leds: Add a driver for mp3326
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: leds: add mps mp3326 LED
  • From: "Yuxi (Yuxi) Wang" <Yuxi.Wang@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/2] leds: Add a driver for mp3326
  • From: "Yuxi (Yuxi) Wang" <Yuxi.Wang@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/2] leds: add mp3326 driver
  • From: "Yuxi (Yuxi) Wang" <Yuxi.Wang@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH V6 2/3] pinctrl: Add support pin control for UP board CPLD/FPGA
  • From: larry <larry.lai@xxxxxxxxxxxxxxx>
• [PATCH V7 3/3] leds: Add support for UP board CPLD onboard LEDS
  • From: "larry.lai" <larry.lai@xxxxxxxxxxxxxxx>
• [PATCH V7 2/3] pinctrl: Add support pin control for UP board CPLD/FPGA
  • From: "larry.lai" <larry.lai@xxxxxxxxxxxxxxx>
• [PATCH V7 1/3] mfd: Add support for UP board CPLD/FPGA
  • From: "larry.lai" <larry.lai@xxxxxxxxxxxxxxx>
• [PATCH V7 0/3] Add support control UP board CPLD/FPGA pin control
  • From: "larry.lai" <larry.lai@xxxxxxxxxxxxxxx>
• [Patch v6 3/7] leds: ledtrig-tty: free allocated ttyname buffer on deactivate
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [Patch v6 1/7] tty: whitespaces in descriptions corrected by replacing tabs with spaces
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [Patch v6 0/8] ledtrig-tty: add additional tty state evaluation
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [Patch v6 2/7] tty: add new helper function tty_get_tiocm
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [Patch v6 5/7] leds: ledtrig-tty: replace mutex with completion
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [Patch v6 4/7] leds: ledtrig-tty: change logging if get icount failed
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [Patch v6 7/7] leds: ledtrig-tty: add additional line state evaluation
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [Patch v6 6/7] leds: ledtrig-tty: make rx tx activitate configurable
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [RESEND PATCH v3] leds: max5970: Add support for max5970
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] leds: ledtrig-tty: add new line mode evaluation
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH] leds: Expand led_colors[] array
  • From: Jisheng Zhang <jszhang@xxxxxxxxxx>
• [PATCH v8 5/5] riscv: dts: allwinner: d1: Add RGB LEDs to boards
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• [PATCH v8 4/5] riscv: dts: allwinner: d1: Add LED controller node
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• [PATCH v8 2/5] leds: sun50i-a100: New driver for the A100 LED controller
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• [PATCH v8 3/5] arm64: dts: allwinner: a100: Add LED controller node
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• [PATCH v8 1/5] dt-bindings: leds: Add Allwinner A100 LED controller
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• [PATCH v8 0/5] leds: Allwinner A100 LED controller support
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• Re: [RESEND PATCH v7 2/5] leds: sun50i-a100: New driver for the A100 LED controller
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• Re: Fwd: sysfs: cannot create duplicate filename .../system76_acpi::kbd_backlight/color
  • From: Bagas Sanjaya <bagasdotme@xxxxxxxxx>
• Re: [PATCH v5 2/2] leds: ledtrig-tty: add new line mode evaluation
  • From: m.brock@xxxxxxxxxxxxx
• [PATCH v4 1/4] pwm: rename pwm_apply_state() to pwm_apply_cansleep()
  • From: Sean Young <sean@xxxxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS 13f0ccb77e98cc82c04db2c5fab984865666285e
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 1/1] dt-bindings: backlight: mp3309c: remove two required properties
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [RESEND PATCH v2] leds: syscon: Support 'reg' in addition to 'offset' for register address
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [RESEND PATCH v2] leds: syscon: Support 'reg' in addition to 'offset' for register address
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 0/1] dt-bindings: backlight: mp3309c: remove two required properties
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• [PATCH v2 1/1] dt-bindings: backlight: mp3309c: remove two required properties
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• [PATCH 5/8] leds: aw200xx: explicitly unregister LEDs at module's shutdown
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• [PATCH 6/8] leds: aw2013: explicitly unregister LEDs at module's shutdown
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• [PATCH 7/8] leds: lp3952: explicitly unregister LEDs at module's shutdown
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• [PATCH 1/8] leds: powernv: explicitly unregister LEDs at module's shutdown
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• [PATCH 0/8] devm_led_classdev_register() usage problem
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• [PATCH 4/8] leds: mlxreg: explicitly unregister LEDs at module's shutdown
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• [PATCH 3/8] leds: an30259a: explicitly unregister LEDs at module's shutdown
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• [PATCH 2/8] leds: nic78bx: explicitly unregister LEDs at module's shutdown
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 3/7] soc: qcom: add QCOM PBS driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [RESEND PATCH v2] dt-bindings: mfd: armltd: Move Arm board syscon's to separate schema
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 1/3] pwm: make it possible to apply pwm changes in atomic context
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: (subset) [PATCH] leds: lp5521: add an error check in lp5521_post_init_device
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 1/3] pwm: make it possible to apply pwm changes in atomic context
  • From: Sean Young <sean@xxxxxxxx>
• Re: [DMARC error] Re: [PATCH v2 03/11] dt-bindings: leds: aw200xx: introduce optional hwen-gpios property
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• RE: [PATCH 1/1] dt-bindings: backlight: mp3309c: remove two required properties
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH v2 11/11] dt-bindings: leds: aw200xx: fix led pattern and add reg constraints
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 03/11] dt-bindings: leds: aw200xx: introduce optional hwen-gpios property
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• Re: [DMARC error] Re: [PATCH v2 03/11] dt-bindings: leds: aw200xx: introduce optional hwen-gpios property
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 03/11] dt-bindings: leds: aw200xx: introduce optional hwen-gpios property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: backlight: mp3309c: remove two required properties
  • From: Conor Dooley <conor@xxxxxxxxxx>
• RE: [PATCH 1/1] dt-bindings: backlight: mp3309c: remove two required properties
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH 1/1] dt-bindings: backlight: mp3309c: remove two required properties
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v3 1/3] pwm: make it possible to apply pwm changes in atomic context
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v5 2/2] leds: ledtrig-tty: add new line mode evaluation
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH v3 1/3] pwm: make it possible to apply pwm changes in atomic context
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v5 2/2] leds: ledtrig-tty: add new line mode evaluation
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] leds: ledtrig-tty: add new line mode evaluation
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH v5 2/2] leds: ledtrig-tty: add new line mode evaluation
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] leds: ledtrig-tty: add new line mode evaluation
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx>
• Re: [PATCH v3 1/3] pwm: make it possible to apply pwm changes in atomic context
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v5 1/2] tty: add new helper function tty_get_tiocm
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] leds: ledtrig-tty: add new line mode evaluation
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [RESEND PATCH v7 2/5] leds: sun50i-a100: New driver for the A100 LED controller
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v5 0/2] ledtrig-tty: add additional tty state evaluation
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v5 2/2] leds: ledtrig-tty: add new line mode evaluation
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v5 1/2] tty: add new helper function tty_get_tiocm
  • From: Florian Eckert <fe@xxxxxxxxxx>
• RE: [PATCH 1/1] dt-bindings: backlight: mp3309c: remove two required properties
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• RE: [PATCH v5] backlight: mp3309c: Add support for MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH v6 4/7] leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v6 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH v4 3/3] leds: ledtrig-tty: add new line mode evaluation
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] tty: whitespaces in descriptions corrected by replacing tabs with spaces
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] pwm: make it possible to apply pwm changes in atomic context
  • From: Sean Young <sean@xxxxxxxx>
• Re: [PATCH v4 1/3] tty: whitespaces in descriptions corrected by replacing tabs with spaces
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH v4 2/3] tty: add new helper function tty_get_tiocm
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH v4 3/3] leds: ledtrig-tty: add new line mode evaluation
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH v4 1/3] tty: whitespaces in descriptions corrected by replacing tabs with spaces
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] tty: add new helper function tty_get_tiocm
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] tty: whitespaces in descriptions corrected by replacing tabs with spaces
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v4 3/3] leds: ledtrig-tty: add new line mode evaluation
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] pwm: make it possible to apply pwm changes in atomic context
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v6 6/7] leds: rgb: leds-qcom-lpg: Include support for PPG with dedicated LUT SDAM
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v6 7/7] leds: rgb: Update PM8350C lpg_data to support two-nvmem PPG Scheme
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v6 4/7] leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v6 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v6 3/7] soc: qcom: add QCOM PBS driver
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v6 1/7] dt-bindings: soc: qcom: Add qcom,pbs bindings
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v6 0/7] Add support for LUT PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v6 2/7] dt-bindings: leds: leds-qcom-lpg: Add support for LPG PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH 1/1] dt-bindings: backlight: mp3309c: remove two required properties
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v5] backlight: mp3309c: Add support for MPS MP3309C
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [RESEND PATCH v2] dt-bindings: mfd: armltd: Move Arm board syscon's to separate schema
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [RESEND PATCH v2] dt-bindings: mfd: armltd: Move Arm board syscon's to separate schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 0/1] dt-bindings: backlight: mp3309c: remove two required properties
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• [PATCH v5] backlight: mp3309c: Add support for MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• [PATCH 1/1] dt-bindings: backlight: mp3309c: remove two required properties
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• [PATCH] leds: lp5521: add an error check in lp5521_post_init_device
  • From: Su Hui <suhui@xxxxxxxxxxxx>
• Re: [RESEND PATCH v7 2/5] leds: sun50i-a100: New driver for the A100 LED controller
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [PATCH v2 04/11] leds: aw200xx: calculate dts property display_rows in driver
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 03/11] dt-bindings: leds: aw200xx: introduce optional hwen-gpios property
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 11/11] dt-bindings: leds: aw200xx: fix led pattern and add reg constraints
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 10/11] dt-bindings: leds: awinic,aw200xx: add AW20108 device
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: (subset) [PATCH v1] dt-bindings: backlight: add brightness-levels related common properties
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v1 1/6] leds: gpio: Keep driver firmware interface agnostic
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v2 1/1] leds: core: Refactor led_update_brightness() to use standard pattern
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: turris-omnia: Fix brightness setting and trigger activating
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v4 3/3] leds: ledtrig-tty: add new line mode evaluation
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v4 1/3] tty: whitespaces in descriptions corrected by replacing tabs with spaces
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v4 2/3] tty: add new helper function tty_get_tiocm
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v4 0/3] ledtrig-tty: add additional tty state evaluation
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: (subset) [PATCH V3] leds: sc27xx: Move mutex_init() down
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 1/3] pwm: make it possible to apply pwm changes in atomic context
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v3 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: m.brock@xxxxxxxxxxxxx
• Re: [PATCH v2 09/11] leds: aw200xx: add support for aw20108 device
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 09/11] leds: aw200xx: add support for aw20108 device
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 06/11] leds: aw200xx: add delay after software reset
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 04/11] leds: aw200xx: calculate dts property display_rows in driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 02/11] leds: aw200xx: support HWEN hardware control
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/2] backlight: Add Kinetic KTD2801 driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2 07/11] leds: aw200xx: enable disable_locking flag in regmap config
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 08/11] leds: aw200xx: improve autodim calculation method
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 09/11] leds: aw200xx: add support for aw20108 device
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 11/11] dt-bindings: leds: aw200xx: fix led pattern and add reg constraints
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 10/11] dt-bindings: leds: awinic,aw200xx: add AW20108 device
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 04/11] leds: aw200xx: calculate dts property display_rows in driver
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 06/11] leds: aw200xx: add delay after software reset
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 03/11] dt-bindings: leds: aw200xx: introduce optional hwen-gpios property
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 05/11] dt-bindings: leds: aw200xx: remove property "awinic,display-rows"
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 02/11] leds: aw200xx: support HWEN hardware control
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 00/11] leds: aw200xx: several driver updates
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v2 01/11] leds: aw200xx: fix write to DIM parameter
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/3] pwm: make it possible to apply pwm changes in atomic context
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v3 1/4] tty: whitespaces in descriptions corrected by replacing tabs with spaces.
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] tty: whitespaces in descriptions corrected by replacing tabs with spaces.
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [RESEND PATCH v7 2/5] leds: sun50i-a100: New driver for the A100 LED controller
  • From: Samuel Holland <samuel@xxxxxxxxxxxx>
• Re: [PATCH v1] dt-bindings: backlight: add brightness-levels related common properties
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v3 1/3] pwm: make it possible to apply pwm changes in atomic context
  • From: Sean Young <sean@xxxxxxxx>
• Re: [PATCH v1 05/11] leds: aw200xx: calculate dts property display_rows in driver
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 09/11] leds: aw200xx: improve autodim calculation method
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v1] dt-bindings: backlight: add brightness-levels related common properties
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v1 6/6] leds: gpio: Update headers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 2/6] leds: gpio: Utilise PTR_ERR_OR_ZERO()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 5/6] leds: gpio: Remove unneeded assignment
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 4/6] leds: gpio: Move temporary variable for struct device to gpio_led_probe()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 3/6] leds: gpio: Refactor code to use devm_gpiod_get_index_optional()
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/6] leds: gpio: Keep driver firmware interface agnostic
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] leds: core: Refactor led_update_brightness() to use standard pattern
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH v2 1/1] leds: core: Refactor led_update_brightness() to use standard pattern
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1] dt-bindings: backlight: add brightness-levels related common properties
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• [PATCH] leds: turris-omnia: Fix brightness setting and trigger activating
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH v3 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH v3 1/4] tty: whitespaces in descriptions corrected by replacing tabs with spaces.
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH] leds: rgb: Implement per-key keyboard backlight for several TUXEDO devices
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx>
• Re: [PATCH v3 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: m.brock@xxxxxxxxxxxxx
• Re: [PATCH v3 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v3 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v3 1/4] tty: whitespaces in descriptions corrected by replacing tabs with spaces.
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v3 0/4] ledtrig-tty: add additional tty state evaluation
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v3 4/4] trigger: ledtrig-tty: add new line mode to triggers
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v3 2/4] tty: add new helper function tty_get_tiocm
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS e0e29e434cdca9705eb420b3f26928444fa559f6
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Pavel Machek <pavel@xxxxxx>
• Implement per-key keyboard backlight as auxdisplay?
  • From: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] leds: rgb: Implement per-key keyboard backlight for several TUXEDO devices
  • From: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] leds: rgb: Implement per-key keyboard backlight for several TUXEDO devices
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RESEND PATCH V2] leds: sc27xx: Move mutex_init() to the end of probe
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v5 0/7] Add support for LUT PPG
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• Re: [PATCH V3] leds: sc27xx: Move mutex_init() down
  • From: Baolin Wang <baolin.wang@xxxxxxxxxxxxxxxxx>
• [PATCH V3] leds: sc27xx: Move mutex_init() down
  • From: Chunyan Zhang <chunyan.zhang@xxxxxxxxxx>
• Re: [PATCH v5 0/7] Add support for LUT PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH] leds: rgb: Implement per-key keyboard backlight for several TUXEDO devices
  • From: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] leds: rgb: Implement per-key keyboard backlight for several TUXEDO devices
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: rgb: Implement per-key keyboard backlight for several TUXEDO devices
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [RESEND PATCH V2] leds: sc27xx: Move mutex_init() to the end of probe
  • From: Baolin Wang <baolin.wang@xxxxxxxxxxxxxxxxx>
• Re: (subset) [net PATCH] leds: trigger: netdev: move size check in set_device_name
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: rgb: Implement per-key keyboard backlight for several TUXEDO devices
  • From: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v6 0/2] leds: Add a driver for KTD202x
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: core: Add more colors from DT bindings to led_colors
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: Last color id is now 14 (LED_COLOR_ID_LIME)
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [RESEND PATCH V2] leds: sc27xx: Move mutex_init() to the end of probe
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: rgb: Implement per-key keyboard backlight for several TUXEDO devices
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [RESEND PATCH V2] leds: sc27xx: Move mutex_init() to the end of probe
  • From: Baolin Wang <baolin.wang@xxxxxxxxxxxxxxxxx>
• [RESEND PATCH V2] leds: sc27xx: Move mutex_init() to the end of probe
  • From: Chunyan Zhang <chunyan.zhang@xxxxxxxxxx>
• Re: [PATCH] leds: rgb: Implement per-key keyboard backlight for several TUXEDO devices
  • From: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
• [PATCH] leds: rgb: Implement per-key keyboard backlight for several TUXEDO devices
  • From: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v4 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• RE: [PATCH v4 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH 2/2] backlight: Add Kinetic KTD2801 driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 04/11] dt-bindings: leds: aw200xx: introduce optional hwen-gpio property
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 11/11] dt-bindings: leds: Add binding for AW20108 led driver
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 06/11] dt-bindings: leds: aw200xx: remove property "awinic,display-rows"
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 04/11] dt-bindings: leds: aw200xx: introduce optional hwen-gpio property
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 02/11] dt-bindings: leds: aw200xx: fix led dt node pattern
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• [PATCH v4 2/2] backlight: mp3309c: Add support for MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH 6/7] fs/sysfs/group: make attribute_group pointers const
  • From: Joe Perches <joe@xxxxxxxxxxx>
• Re: [PATCH 6/7] fs/sysfs/group: make attribute_group pointers const
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/7] fs/sysfs/group: make attribute_group pointers const
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/7] fs/sysfs/group: make attribute_group pointers const
  • From: Max Kellermann <max.kellermann@xxxxxxxxx>
• Re: [PATCH 6/7] fs/sysfs/group: make attribute_group pointers const
  • From: Max Kellermann <max.kellermann@xxxxxxxxx>
• Re: [PATCH 6/7] fs/sysfs/group: make attribute_group pointers const
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/7] fs/sysfs/group: make attribute_group pointers const
  • From: Max Kellermann <max.kellermann@xxxxxxxxx>
• Re: [PATCH 6/7] fs/sysfs/group: make attribute_group pointers const
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 6/7] fs/sysfs/group: make attribute_group pointers const
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• [PATCH 6/7] fs/sysfs/group: make attribute_group pointers const
  • From: Max Kellermann <max.kellermann@xxxxxxxxx>
• Re: [PATCH 2/2] backlight: Add Kinetic KTD2801 driver
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: [PATCH v1 09/11] leds: aw200xx: improve autodim calculation method
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 05/11] leds: aw200xx: calculate dts property display_rows in driver
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 09/11] leds: aw200xx: improve autodim calculation method
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 07/11] leds: aw200xx: add delay after software reset
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 03/11] leds: aw200xx: support HWEN hardware control
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: backlight: add Kinetic KTD2801 binding
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 2/2] backlight: Add Kinetic KTD2801 driver
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: Last color id is now 14 (LED_COLOR_ID_LIME)
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH] leds: core: Add more colors from DT bindings to led_colors
  • From: Ondřej Jirman <megi@xxxxxx>
• [PATCH] dt-bindings: leds: Last color id is now 14 (LED_COLOR_ID_LIME)
  • From: Ondřej Jirman <megi@xxxxxx>
• [net PATCH] leds: trigger: netdev: move size check in set_device_name
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH v1 09/11] leds: aw200xx: improve autodim calculation method
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 07/11] leds: aw200xx: add delay after software reset
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 05/11] leds: aw200xx: calculate dts property display_rows in driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v1 03/11] leds: aw200xx: support HWEN hardware control
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [PATCH v1 11/11] dt-bindings: leds: Add binding for AW20108 led driver
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v1 00/11] leds: aw200xx: several driver updates
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v1 02/11] dt-bindings: leds: aw200xx: fix led dt node pattern
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v1 03/11] leds: aw200xx: support HWEN hardware control
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v1 05/11] leds: aw200xx: calculate dts property display_rows in driver
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v1 06/11] dt-bindings: leds: aw200xx: remove property "awinic,display-rows"
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v1 01/11] leds: aw200xx: fix write to DIM parameter
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v1 07/11] leds: aw200xx: add delay after software reset
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v1 04/11] dt-bindings: leds: aw200xx: introduce optional hwen-gpio property
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v1 09/11] leds: aw200xx: improve autodim calculation method
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v1 08/11] leds: aw200xx: enable disable_locking flag in regmap config
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [PATCH v1 10/11] leds: aw200xx: add support for aw20108 device
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] leds: Fix BUG_ON check for LED_COLOR_ID_MULTI that is always false
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH] leds: Fix BUG_ON check for LED_COLOR_ID_MULTI that is always false
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: Fix BUG_ON check for LED_COLOR_ID_MULTI that is always false
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH] leds: Fix BUG_ON check for LED_COLOR_ID_MULTI that is always false
  • From: Mark Rutland <mark.rutland@xxxxxxx>
• Re: [PATCH 2/2] backlight: Add Kinetic KTD2801 driver
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: backlight: add Kinetic KTD2801 binding
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: backlight: add Kinetic KTD2801 binding
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• RE: [PATCH v3 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS ed84d55d5115455d17fa93f63dbf89697a309d6e
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2] backlight: Add Kinetic KTD2801 driver
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: backlight: add Kinetic KTD2801 binding
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH 0/2] Kinetic KTD2801 backlight driver
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH 2/2] backlight: Add Kinetic KTD2801 driver
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH 1/2] dt-bindings: backlight: add Kinetic KTD2801 binding
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• RE: [PATCH v3 0/2] Match data improvements for pca955x driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• RE: [PATCH v3 0/2] Match data improvements for pca955x driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v3 0/2] Match data improvements for pca955x driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v1 1/1] leds: tca6507: Don't use fixed GPIO base
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 0/2] Match data improvements for pca955x driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v5 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v5 6/7] leds: rgb: leds-qcom-lpg: Include support for PPG with dedicated LUT SDAM
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: Greg KH <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] leds: Convert to use maple tree register cache
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v1 1/1] leds: tca6507: Don't use fixed GPIO base
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v5 4/7] leds: rgb: leds-qcom-lpg: Add support for single SDAM PPG
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v5 7/7] leds: rgb: Update PM8350C lpg_data to support two-nvmem PPG Scheme
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Proposal to add one "configured" property to indicate whether LED has been configured
  • From: Jack Chen <zenghuchen@xxxxxxxxxx>
• RE: [PATCH v3 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: Florian Eckert <fe@xxxxxxxxxx>
• RE: [PATCH v3 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• RE: [PATCH v3 2/2] backlight: mp3309c: Add support for MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• RE: [PATCH v3 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• [PATCH v6 0/2] leds: Add a driver for KTD202x
  • From: André Apitzsch <git@xxxxxxxxxxx>
• [PATCH v6 1/2] dt-bindings: leds: Add Kinetic KTD2026/2027 LED
  • From: André Apitzsch <git@xxxxxxxxxxx>
• [PATCH v6 2/2] leds: add ktd202x driver
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v1 1/1] leds: tca6507: Don't use fixed GPIO base
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH v2 1/4] tty: whitespaces in descriptions corrected by replacing tabs with spaces.
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• Re: [PATCH v2 1/3] gpiolib: of: Allow "trigger-sources" to reference a GPIO
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH v5 2/2] leds: add ktd202x driver
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [PATCH v5 2/2] leds: add ktd202x driver
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v5 2/2] leds: add ktd202x driver
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v5 2/2] leds: add ktd202x driver
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [PATCH v5 2/2] leds: add ktd202x driver
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v5 0/7] Add support for LUT PPG
  • From: "Luca Weiss" <luca.weiss@xxxxxxxxxxxxx>
• [PATCH v5 2/2] leds: add ktd202x driver
  • From: André Apitzsch <git@xxxxxxxxxxx>
• [PATCH v5 0/2] leds: Add a driver for KTD202x
  • From: André Apitzsch <git@xxxxxxxxxxx>
• [PATCH v5 1/2] dt-bindings: leds: Add Kinetic KTD2026/2027 LED
  • From: André Apitzsch <git@xxxxxxxxxxx>
• [PATCH v3 2/2] leds: pca955x: Cleanup OF/ID table terminators
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v3 0/2] Match data improvements for pca955x driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v3 1/2] leds: pca955x: Convert enum->pointer for data in the match tables
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH 3/4] leds: lm392x: Convert to use maple tree register cache
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 1/4] leds: lm3601x: Convert to use maple tree register cache
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 2/4] leds: aw200xx: Convert to use maple tree register cache
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 4/4] leds: lp3952: Convert to use maple tree register cache
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH 0/4] leds: Convert to use maple tree register cache
  • From: Mark Brown <broonie@xxxxxxxxxx>
• [PATCH v5 4/7] leds: rgb: leds-qcom-lpg: Add support for single SDAM PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v5 6/7] leds: rgb: leds-qcom-lpg: Include support for PPG with dedicated LUT SDAM
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v5 7/7] leds: rgb: Update PM8350C lpg_data to support two-nvmem PPG Scheme
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v5 5/7] leds: rgb: leds-qcom-lpg: Update PMI632 lpg_data to support PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v5 3/7] soc: qcom: add QCOM PBS driver
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v5 0/7] Add support for LUT PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v5 2/7] dt-bindings: leds: leds-qcom-lpg: Add support for LPG PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH v5 1/7] dt-bindings: soc: qcom: Add qcom,pbs bindings
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH v4 2/2] leds: add ktd202x driver
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [PATCH v2 1/3] gpiolib: of: Allow "trigger-sources" to reference a GPIO
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v4 2/2] leds: add ktd202x driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v2 0/3] Rewrite GPIO LED trigger to use trigger-sources
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v3 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Lee Jones <lee@xxxxxxxxxx>
• RE: [PATCH v2 1/2] leds: pca955x: Convert enum->pointer for data in the match tables
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] leds: pca955x: Convert enum->pointer for data in the match tables
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 0/2] Match data improvements for pca955x driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: pca955x: Convert enum->pointer for data in the match tables
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: lp3952: replace deprecated strncpy with strscpy
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: lp3952: replace deprecated strncpy with strscpy
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH V2] leds: sc27xx: Move mutex_init() to the end of probe
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v2 0/4] ledtrig-tty: add new state evaluation
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v2 4/4] trigger: ledtrig-tty: add new line mode to triggers
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v2 2/4] tty: add new helper function tty_get_tiocm
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v2 1/4] tty: whitespaces in descriptions corrected by replacing tabs with spaces.
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH v2 3/4] trigger: ledtrig-tty: move variable definition to the top
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH] leds: trigger: ledtrig-cpu:: Fix a warning when compiling with W=1
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: trigger: ledtrig-cpu:: Fix a warning when compiling with W=1
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v2] leds: pwm: Don't disable the PWM when the LED should be off
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v2 0/3] Rewrite GPIO LED trigger to use trigger-sources
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2 3/3] leds: triggers: gpio: Rewrite to use trigger-sources
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2 1/3] gpiolib: of: Allow "trigger-sources" to reference a GPIO
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2 2/3] dt-bindings: leds: Mention GPIO triggers
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 2/2] trigger: ledtrig-tty: add new line mode to triggers
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 2/2] backlight: mp3309c: Add support for MPS MP3309C
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 1/2] tty: add new helper function tty_get_mget
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH 1/2] tty: add new helper function tty_get_mget
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH 0/2] ledtrig-tty: add new state evaluation
  • From: Florian Eckert <fe@xxxxxxxxxx>
• [PATCH 2/2] trigger: ledtrig-tty: add new line mode to triggers
  • From: Florian Eckert <fe@xxxxxxxxxx>
• Re: [PATCH 1/2] tty: add new helper function tty_get_mget
  • From: Jiri Slaby <jirislaby@xxxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• [PATCH v3 2/2] backlight: mp3309c: Add support for MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH] leds: turris-omnia: Fix unused variable
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: pca955x: Cleanup OF/ID table terminators
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/2] leds: pca955x: Convert enum->pointer for data in the match tables
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH V2] leds: sc27xx: Move mutex_init() to the end of probe
  • From: Chunyan Zhang <chunyan.zhang@xxxxxxxxxx>
• Re: [PATCH] leds: lp3952: replace deprecated strncpy with strscpy
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH v2 2/2] leds: pca955x: Cleanup OF/ID table terminators
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v2 1/2] leds: pca955x: Convert enum->pointer for data in the match tables
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v2 0/2] Match data improvements for pca955x driver
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v4 2/2] leds: add ktd202x driver
  • From: André Apitzsch <git@xxxxxxxxxxx>
• [PATCH v4 1/2] dt-bindings: leds: Add Kinetic KTD2026/2027 LED
  • From: André Apitzsch <git@xxxxxxxxxxx>
• [PATCH v4 0/2] leds: Add a driver for KTD202x
  • From: André Apitzsch <git@xxxxxxxxxxx>
• [PATCH] leds: trigger: ledtrig-cpu:: Fix a warning when compiling with W=1
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS 685f192b3a0a80af8000cb90692bd4ef7bc6f7f9
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v2] leds: pwm: Don't disable the PWM when the LED should be off
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] leds: pwm: Don't disable the PWM when the LED should be off
  • From: Fabio Estevam <festevam@xxxxxxx>
• [PATCH] leds: lp3952: replace deprecated strncpy with strscpy
  • From: Justin Stitt <justinstitt@xxxxxxxxxx>
• [PATCH] leds: pwm: Don't disable the PWM when the LED should be off
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [lee-leds:leds-fixes] BUILD SUCCESS 9dc1664fab2246bc2c3e9bf2cf21518a857f9b5b
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] leds: turris-omnia: Fix unused variable
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [PATCH] leds: turris-omnia: Fix unused variable
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH] leds: turris-omnia: Fix unused variable
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: [RESEND PATCH v3] leds: max5970: Add support for max5970
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: lp55xx: use gpiod_set_value_cansleep
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: sc27xx: Add a missing mutex_destory()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH V6 1/3] mfd: Add support for UP board CPLD/FPGA
  • From: Lee Jones <lee@xxxxxxxxxx>
• [lee-leds:for-leds-next 53/56] drivers/leds/leds-turris-omnia.c:47:13: warning: unused variable 'ret'
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v4] leds: max5970: Add support for max5970
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v4 0/4] leds: turris-omnia: updates
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [RESEND PATCH v3] leds: max5970: Add support for max5970
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• [PATCH v4] leds: max5970: Add support for max5970
  • From: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
• Re: 回覆: [PATCH V6 2/3] pinctrl: Add support pin control for UP board CPLD/FPGA
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH] leds: sc27xx: Add a missing mutex_destory()
  • From: Chunyan Zhang <chunyan.zhang@xxxxxxxxxx>
• Re: [PATCH v2 2/2] backlight: mp3309c: Add support for MPS MP3309C
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: mt6370: Annotate struct mt6370_priv with __counted_by
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: mt6360: Annotate struct mt6360_priv with __counted_by
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: Convert all platform drivers to return void
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v2] leds: simatic-ipc-leds-gpio: Convert to platform remove callback returning void
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: qcom-lpg: Annotate struct lpg_led with __counted_by
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: lm3697: Annotate struct lm3697 with __counted_by
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: gpio: Annotate struct gpio_leds_priv with __counted_by
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: el15203000: Annotate struct el15203000 with __counted_by
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: cr0014114: Annotate struct cr0014114 with __counted_by
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: aw200xx: Annotate struct aw200xx with __counted_by
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [RESEND PATCH v3] leds: max5970: Add support for max5970
  • From: Lee Jones <lee@xxxxxxxxxx>
• RE: [PATCH] leds: pca955x: Convert enum->pointer for data in the match tables
  • From: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
• [PATCH v2] dt-bindings: mfd: armltd: Move Arm board syscon's to separate schema
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: (subset) [PATCH v5 02/37] dt-bindings: mfd: qcom-pm8xxx: add missing child nodes
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: pca955x: Convert enum->pointer for data in the match tables
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: pca955x: fix -Wvoid-pointer-to-enum-cast warning
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: Drop BUG_ON check for LED_COLOR_ID_MULTI
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: Drop BUG_ON check for LED_COLOR_ID_MULTI
  • From: Lee Jones <lee@xxxxxxxxxx>
• 回覆: [PATCH V6 2/3] pinctrl: Add support pin control for UP board CPLD/FPGA
  • From: Larry Lai <larry.lai@xxxxxxxxxxxxxxx>
• Re: [PATCH] leds: Drop BUG_ON check for LED_COLOR_ID_MULTI
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: Drop BUG_ON check for LED_COLOR_ID_MULTI
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH] leds: Drop BUG_ON check for LED_COLOR_ID_MULTI
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: linux-stable 6.1.53 kernel crash on COLOR_ID_MULTI handling change
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH] leds: Drop BUG_ON check for LED_COLOR_ID_MULTI
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v4 1/4] leds: turris-omnia: do not use SMBUS calls
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v4 2/4] leds: turris-omnia: make set_brightness() more efficient
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v4 3/4] leds: turris-omnia: support HW controlled mode via private trigger
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v4 0/4] leds: turris-omnia: updates
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH v4 4/4] leds: turris-omnia: add support for enabling/disabling HW gamma correction
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH] leds: lp55xx: use gpiod_set_value_cansleep
  • From: Stefan Eichenberger <eichest@xxxxxxxxx>
• RE: [PATCH v2 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• RE: [PATCH v2 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Flavio Suligoi <f.suligoi@xxxxxxx>
• Re: [PATCH] leds: mt6360: Annotate struct mt6360_priv with __counted_by
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH] leds: mt6370: Annotate struct mt6370_priv with __counted_by
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH] leds: Convert all platform drivers to return void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH] schemas: gpio: Add trigger-source-cells
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v2] leds: simatic-ipc-leds-gpio: Convert to platform remove callback returning void
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH] leds: qcom-lpg: Annotate struct lpg_led with __counted_by
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH] leds: mt6370: Annotate struct mt6370_priv with __counted_by
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH] leds: mt6360: Annotate struct mt6360_priv with __counted_by
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH] leds: lm3697: Annotate struct lm3697 with __counted_by
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH] leds: gpio: Annotate struct gpio_leds_priv with __counted_by
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH] leds: el15203000: Annotate struct el15203000 with __counted_by
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH] leds: cr0014114: Annotate struct cr0014114 with __counted_by
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• Re: [PATCH] leds: aw200xx: Annotate struct aw200xx with __counted_by
  • From: "Gustavo A. R. Silva" <gustavo@xxxxxxxxxxxxxx>
• [PATCH] leds: mt6370: Annotate struct mt6370_priv with __counted_by
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH] leds: gpio: Annotate struct gpio_leds_priv with __counted_by
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH] leds: cr0014114: Annotate struct cr0014114 with __counted_by
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH] leds: qcom-lpg: Annotate struct lpg_led with __counted_by
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH] leds: lm3697: Annotate struct lm3697 with __counted_by
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH] leds: aw200xx: Annotate struct aw200xx with __counted_by
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH] leds: el15203000: Annotate struct el15203000 with __counted_by
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• [PATCH] leds: mt6360: Annotate struct mt6360_priv with __counted_by
  • From: Kees Cook <keescook@xxxxxxxxxxxx>
• Re: [PATCH V6 2/3] pinctrl: Add support pin control for UP board CPLD/FPGA
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 2/2] leds: triggers: gpio: Rewrite to use trigger-sources
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: backlight: Add MPS MP3309C
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: triggers: gpio: Rewrite to use trigger-sources
  • From: Rob Herring <robh@xxxxxxxxxx>