On Sun, 14 Jan 2024, Joseph Strauss wrote:
> Add multicolor support to the BlinkM driver, making it easier to control
> from userspace. The BlinkM LED is a programmable RGB LED. The driver
> currently supports only the regular LED sysfs class, resulting in the
> creation of three distinct classes, one for red, green, and blue. The
> user then has to input three values into the three seperate brightness
> files within those classes. The multicolor LED framework makes the
> device easier to control with the multi_intensity file: the user can
> input three values at once to form a color, while still controlling the
> lightness with the brightness file.
>
> The main struct blinkm_led has changed slightly. The struct led_classdev
> for the regular sysfs classes remain. The blinkm_probe function checks
> CONFIG_LEDS_BLINKM_MULTICOLOR to decide whether to load the seperate
> sysfs classes or the single multicolor one, but never both. The
> blinkm_set_mc_brightness() function had to be added to calculate the
> three color components and then set the fields of the blinkm_data
> structure accordingly.
>
> All of the feedback has been much appreciated. Thanks!
This needs to go below the '---'.
So you've had feedback but no positive reviews resulting in a *-by?
Have you Cc:ed all of your reviewers in this version?
> Signed-off-by: Joseph Strauss <jstrauss@xxxxxxxxxxx>
> ---
> Changes in v2:
> - Replaced instances of the constant 3 with NUM_LEDS, where applicable
> - Fixed formatting errors
> - Replaced loop inside of blinkm_set_mc_brightness() with equivalent
> statements
> - Changed id of multicolor class from 4 to 3
> - Replaced call to devm_kmalloc_array() with devm_kcalloc()
> Changes in v3:
> - Add CONFIG_LEDS_BLINKM_MULTICOLOR to check whether to use multicolor
> funcitonality
> - Extend well-known-leds.txt to include standard names for RGB and indicator
> LEDS
> - Change name of Blinkm sysfs class according to well-known-leds.txt
> - Simplify struct blinkm_led and struct blinkm_data
> - Remove magic numbers
> - Fix formatting errors
> - Remove unrelated changes
> Changes in v4:
> - Fix indentation
> - Add default case to switch statement
> Changes in v5:
> - Fix warnings related to snprintf on s390 architecture, reported by
> 0-DAY CI Kernel Test Service
>
> Documentation/leds/leds-blinkm.rst | 27 ++-
> Documentation/leds/well-known-leds.txt | 8 +
> drivers/leds/Kconfig | 8 +
> drivers/leds/leds-blinkm.c | 217 +++++++++++++++++--------
> 4 files changed, 185 insertions(+), 75 deletions(-)
Looking pretty good. Just a couple of minor nits.
> diff --git a/Documentation/leds/leds-blinkm.rst b/Documentation/leds/leds-blinkm.rst
> index c74b5bc877b1..16883c2a9a99 100644
> --- a/Documentation/leds/leds-blinkm.rst
> +++ b/Documentation/leds/leds-blinkm.rst
> @@ -13,9 +13,27 @@ The device accepts RGB and HSB color values through separate commands.
> Also you can store blinking sequences as "scripts" in
> the controller and run them. Also fading is an option.
>
> -The interface this driver provides is 2-fold:
> +The interface this driver provides is 3-fold:
>
> -a) LED class interface for use with triggers
> +a) LED multicolor class interface for use with triggers
> +#######################################################
> +
> +The registration follows the scheme::
> +
> + blinkm-<i2c-bus-nr>-<i2c-device-nr>:rgb:indicator
> +
> + $ ls -h /sys/class/leds/blinkm-1-9:rgb:indicator
The `-h` is superfluous, no?
> + brightness device max_brightness multi_index multi_intensity power subsystem trigger uevent
> +
> +The order in which to write the intensity values can be found in multi_index.
> +Exactly three values between 0 and 255 must be written to multi_intensity to change the color::
:: ?
> +
> + $ echo 255 100 50 > multi_intensity
> +
> +The overall brightness of the color that you choose can also be changed by
> +writing a value between 0 and 255 to the brightness file.
So what's the difference between brightness and intensity?
> +b) LED class interface for use with triggers
> ############################################
>
> The registration follows the scheme::
> @@ -50,7 +68,7 @@ E.g.::
> $
>
>
> -b) Sysfs group to control rgb, fade, hsb, scripts ...
> +c) Sysfs group to control rgb, fade, hsb, scripts ...
> #####################################################
>
> This extended interface is available as folder blinkm
> @@ -79,6 +97,7 @@ E.g.::
>
>
>
> -as of 6/2012
> +as of 01/2024
>
> dl9pf <at> gmx <dot> de
> +jstrauss <at> mailbox <dot> org
> diff --git a/Documentation/leds/well-known-leds.txt b/Documentation/leds/well-known-leds.txt
> index 2160382c86be..2ac4eaed1454 100644
> --- a/Documentation/leds/well-known-leds.txt
> +++ b/Documentation/leds/well-known-leds.txt
> @@ -70,3 +70,11 @@ Good: "platform:*:charging" (allwinner sun50i)
> * Screen
>
> Good: ":backlight" (Motorola Droid 4)
> +
> +* Indicators
> +
> +Good: ":indicator" (Blinkm)
> +
> +* RGB
> +
> +Good: ":rgb" (Blinkm)
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 499d0f215a8b..f38d786f9a89 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -736,6 +736,14 @@ config LEDS_BLINKM
> This option enables support for the BlinkM RGB LED connected
> through I2C. Say Y to enable support for the BlinkM LED.
>
> +config LEDS_BLINKM_MULTICOLOR
> + bool "Enable multicolor support for BlinkM I2C RGB LED"
> + depends on LEDS_BLINKM
> + depends on LEDS_CLASS_MULTICOLOR
> + help
> + This option enables multicolor sysfs class support for BlinkM LED and
> + disables the older, separated sysfs interface
> +
> config LEDS_POWERNV
> tristate "LED support for PowerNV Platform"
> depends on LEDS_CLASS
> diff --git a/drivers/leds/leds-blinkm.c b/drivers/leds/leds-blinkm.c
> index e19cc8a7b7ca..d6ce2cccb816 100644
> --- a/drivers/leds/leds-blinkm.c
> +++ b/drivers/leds/leds-blinkm.c
> @@ -2,6 +2,7 @@
> /*
> * leds-blinkm.c
> * (c) Jan-Simon Möller (dl9pf@xxxxxx)
> + * (c) Joseph Strauss (jstrauss@xxxxxxxxxxx)
> */
>
> #include <linux/module.h>
> @@ -15,6 +16,10 @@
> #include <linux/pm_runtime.h>
> #include <linux/leds.h>
> #include <linux/delay.h>
> +#include <linux/led-class-multicolor.h>
> +#include <linux/kconfig.h>
> +
> +#define NUM_LEDS 3
>
> /* Addresses to scan - BlinkM is on 0x09 by default*/
> static const unsigned short normal_i2c[] = { 0x09, I2C_CLIENT_END };
> @@ -22,19 +27,24 @@ static const unsigned short normal_i2c[] = { 0x09, I2C_CLIENT_END };
> static int blinkm_transfer_hw(struct i2c_client *client, int cmd);
> static int blinkm_test_run(struct i2c_client *client);
>
> +/* Contains data structures for both the color-seperated sysfs classes, and the new multicolor class */
> struct blinkm_led {
> struct i2c_client *i2c_client;
> + /* used when multicolor support is disabled */
There's a syntax for either/or in structs. Isn't it 'union'?
Can/does that apply here?
> struct led_classdev led_cdev;
> + struct led_classdev_mc mcled_cdev;
> int id;
> };
>
> -#define cdev_to_blmled(c) container_of(c, struct blinkm_led, led_cdev)
> +#define led_cdev_to_blmled(c) container_of(c, struct blinkm_led, led_cdev)
> +#define mcled_cdev_to_led(c) container_of(c, struct blinkm_led, mcled_cdev)
>
> struct blinkm_data {
> struct i2c_client *i2c_client;
> struct mutex update_lock;
> /* used for led class interface */
> - struct blinkm_led blinkm_leds[3];
> + struct blinkm_led blinkm_leds[NUM_LEDS];
> +
> /* used for "blinkm" sysfs interface */
> u8 red; /* color red */
> u8 green; /* color green */
> @@ -419,11 +429,29 @@ static int blinkm_transfer_hw(struct i2c_client *client, int cmd)
> return 0;
> }
>
> +static int blinkm_set_mc_brightness(struct led_classdev *led_cdev,
> + enum led_brightness value)
> +{
> + struct led_classdev_mc *mcled_cdev = lcdev_to_mccdev(led_cdev);
> + struct blinkm_led *led = mcled_cdev_to_led(mcled_cdev);
> + struct blinkm_data *data = i2c_get_clientdata(led->i2c_client);
> +
> + led_mc_calc_color_components(mcled_cdev, value);
> +
> + data->next_red = (u8) mcled_cdev->subled_info[RED].brightness;
> + data->next_green = (u8) mcled_cdev->subled_info[GREEN].brightness;
> + data->next_blue = (u8) mcled_cdev->subled_info[BLUE].brightness;
> +
> + blinkm_transfer_hw(led->i2c_client, BLM_GO_RGB);
> +
> + return 0;
> +}
> +
> static int blinkm_led_common_set(struct led_classdev *led_cdev,
> enum led_brightness value, int color)
> {
> /* led_brightness is 0, 127 or 255 - we just use it here as-is */
> - struct blinkm_led *led = cdev_to_blmled(led_cdev);
> + struct blinkm_led *led = led_cdev_to_blmled(led_cdev);
> struct blinkm_data *data = i2c_get_clientdata(led->i2c_client);
>
> switch (color) {
> @@ -569,7 +597,11 @@ static int blinkm_probe(struct i2c_client *client,
> const struct i2c_device_id *id)
> {
> struct blinkm_data *data;
> - struct blinkm_led *led[3];
> + /* For multicolor support */
> + struct blinkm_led *mc_led;
> + struct mc_subled *mc_led_info;
> + /* 3 seperate classes for red, green, and blue respectively */
> + struct blinkm_led *leds[NUM_LEDS];
> int err, i;
> char blinkm_led_name[28];
>
> @@ -580,6 +612,12 @@ static int blinkm_probe(struct i2c_client *client,
> goto exit;
> }
>
> + mc_led_info = devm_kcalloc(&client->dev, NUM_LEDS, sizeof(*mc_led_info),
> + GFP_KERNEL);
> + if (!mc_led_info) {
> + err = -ENOMEM;
> + goto exit;
> + }
> data->i2c_addr = 0x08;
> /* i2c addr - use fake addr of 0x08 initially (real is 0x09) */
> data->fw_ver = 0xfe;
> @@ -598,81 +636,118 @@ static int blinkm_probe(struct i2c_client *client,
> goto exit;
> }
>
> - for (i = 0; i < 3; i++) {
> - /* RED = 0, GREEN = 1, BLUE = 2 */
> - led[i] = &data->blinkm_leds[i];
> - led[i]->i2c_client = client;
> - led[i]->id = i;
> - led[i]->led_cdev.max_brightness = 255;
> - led[i]->led_cdev.flags = LED_CORE_SUSPENDRESUME;
> - switch (i) {
> - case RED:
> - snprintf(blinkm_led_name, sizeof(blinkm_led_name),
> - "blinkm-%d-%d-red",
> - client->adapter->nr,
> - client->addr);
> - led[i]->led_cdev.name = blinkm_led_name;
> - led[i]->led_cdev.brightness_set_blocking =
> - blinkm_led_red_set;
> - err = led_classdev_register(&client->dev,
> - &led[i]->led_cdev);
> - if (err < 0) {
> - dev_err(&client->dev,
> - "couldn't register LED %s\n",
> - led[i]->led_cdev.name);
> - goto failred;
> - }
> - break;
> - case GREEN:
> - snprintf(blinkm_led_name, sizeof(blinkm_led_name),
> - "blinkm-%d-%d-green",
> - client->adapter->nr,
> - client->addr);
> - led[i]->led_cdev.name = blinkm_led_name;
> - led[i]->led_cdev.brightness_set_blocking =
> - blinkm_led_green_set;
> - err = led_classdev_register(&client->dev,
> - &led[i]->led_cdev);
> - if (err < 0) {
> - dev_err(&client->dev,
> - "couldn't register LED %s\n",
> - led[i]->led_cdev.name);
> - goto failgreen;
> - }
> - break;
> - case BLUE:
> - snprintf(blinkm_led_name, sizeof(blinkm_led_name),
> - "blinkm-%d-%d-blue",
> - client->adapter->nr,
> - client->addr);
> - led[i]->led_cdev.name = blinkm_led_name;
> - led[i]->led_cdev.brightness_set_blocking =
> - blinkm_led_blue_set;
> - err = led_classdev_register(&client->dev,
> - &led[i]->led_cdev);
> - if (err < 0) {
> - dev_err(&client->dev,
> - "couldn't register LED %s\n",
> - led[i]->led_cdev.name);
> - goto failblue;
> - }
> - break;
> - } /* end switch */
> - } /* end for */
> -
> - /* Initialize the blinkm */
> + if (!IS_ENABLED(CONFIG_LEDS_BLINKM_MULTICOLOR)) {
> + /* Register red, green, and blue sysfs classes */
> + for (i = 0; i < NUM_LEDS; i++) {
*Even* more indentation!
Probably worth moving the whole section into a function at this point.
> + /* RED = 0, GREEN = 1, BLUE = 2 */
> + leds[i] = &data->blinkm_leds[i];
> + leds[i]->i2c_client = client;
> + leds[i]->id = i;
> + leds[i]->led_cdev.max_brightness = 255;
> + leds[i]->led_cdev.flags = LED_CORE_SUSPENDRESUME;
> + switch (i) {
> + case RED:
> + scnprintf(blinkm_led_name, sizeof(blinkm_led_name),
> + "blinkm-%d-%d-red",
> + client->adapter->nr,
> + client->addr);
> + leds[i]->led_cdev.name = blinkm_led_name;
> + leds[i]->led_cdev.brightness_set_blocking =
> + blinkm_led_red_set;
> + err = led_classdev_register(&client->dev,
> + &leds[i]->led_cdev);
> + if (err < 0) {
> + dev_err(&client->dev,
> + "couldn't register LED %s\n",
> + leds[i]->led_cdev.name);
> + goto failred;
> + }
> + break;
> + case GREEN:
> + scnprintf(blinkm_led_name, sizeof(blinkm_led_name),
> + "blinkm-%d-%d-green",
> + client->adapter->nr,
> + client->addr);
> + leds[i]->led_cdev.name = blinkm_led_name;
> + leds[i]->led_cdev.brightness_set_blocking =
> + blinkm_led_green_set;
> + err = led_classdev_register(&client->dev,
> + &leds[i]->led_cdev);
> + if (err < 0) {
> + dev_err(&client->dev,
> + "couldn't register LED %s\n",
> + leds[i]->led_cdev.name);
> + goto failgreen;
> + }
> + break;
> + case BLUE:
> + scnprintf(blinkm_led_name, sizeof(blinkm_led_name),
> + "blinkm-%d-%d-blue",
> + client->adapter->nr,
> + client->addr);
> + leds[i]->led_cdev.name = blinkm_led_name;
> + leds[i]->led_cdev.brightness_set_blocking =
> + blinkm_led_blue_set;
> + err = led_classdev_register(&client->dev,
> + &leds[i]->led_cdev);
> + if (err < 0) {
> + dev_err(&client->dev,
> + "couldn't register LED %s\n",
> + leds[i]->led_cdev.name);
> + goto failblue;
> + }
> + break;
> + default:
> + break;
> + } /* end switch */
> + } /* end for */
> + } else {
> + /* Register multicolor sysfs class */
> + /* The first element of leds is used for multicolor facilities */
> + mc_led = &data->blinkm_leds[RED];
> + mc_led->i2c_client = client;
> +
> + mc_led_info[RED].color_index = LED_COLOR_ID_RED;
> + mc_led_info[GREEN].color_index = LED_COLOR_ID_GREEN;
> + mc_led_info[BLUE].color_index = LED_COLOR_ID_BLUE;
> +
> + mc_led->mcled_cdev.subled_info = mc_led_info;
> + mc_led->mcled_cdev.num_colors = NUM_LEDS;
> + mc_led->mcled_cdev.led_cdev.brightness = 255;
> + mc_led->mcled_cdev.led_cdev.max_brightness = 255;
> + mc_led->mcled_cdev.led_cdev.flags = LED_CORE_SUSPENDRESUME;
> +
> + scnprintf(blinkm_led_name, sizeof(blinkm_led_name),
> + "blinkm-%d-%d:rgb:indicator",
> + client->adapter->nr,
> + client->addr);
> + mc_led->mcled_cdev.led_cdev.name = blinkm_led_name;
> + mc_led->mcled_cdev.led_cdev.brightness_set_blocking = blinkm_set_mc_brightness;
> +
> + err = led_classdev_multicolor_register(&client->dev, &mc_led->mcled_cdev);
> + if (err < 0) {
> + dev_err(&client->dev, "couldn't register LED %s\n",
> + mc_led->led_cdev.name);
> + goto failmulti;
> + }
> + }
> +
> blinkm_init_hw(client);
>
> return 0;
>
> +failmulti:
> + led_classdev_unregister(&leds[BLUE]->led_cdev);
> +
> failblue:
> - led_classdev_unregister(&led[GREEN]->led_cdev);
> + led_classdev_unregister(&leds[GREEN]->led_cdev);
>
> failgreen:
> - led_classdev_unregister(&led[RED]->led_cdev);
> + led_classdev_unregister(&leds[RED]->led_cdev);
>
> failred:
> sysfs_remove_group(&client->dev.kobj, &blinkm_group);
> +
> exit:
> return err;
> }
> @@ -684,7 +759,7 @@ static void blinkm_remove(struct i2c_client *client)
> int i;
>
> /* make sure no workqueue entries are pending */
> - for (i = 0; i < 3; i++)
> + for (i = 0; i < NUM_LEDS; i++)
> led_classdev_unregister(&data->blinkm_leds[i].led_cdev);
>
> /* reset rgb */
> @@ -741,6 +816,6 @@ static struct i2c_driver blinkm_driver = {
> module_i2c_driver(blinkm_driver);
>
> MODULE_AUTHOR("Jan-Simon Moeller <dl9pf@xxxxxx>");
> +MODULE_AUTHOR("Joseph Strauss <jstrauss@xxxxxxxxxxx>");
> MODULE_DESCRIPTION("BlinkM RGB LED driver");
> MODULE_LICENSE("GPL");
> -
> --
> 2.42.0
>
--
1)
Lee Jones [李琼斯]
