Linux LEDS Development

• Thread Index

• [PATCH v6 3/3] ARM: dts: marvell: Add 7-segment LED display on x530
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v6 0/3] auxdisplay: 7-segment LED display
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v6 1/3] auxdisplay: Add 7-segment LED display driver
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v5 02/10] locking/mutex: introduce devm_mutex_init
  • From: Marek Behún <marek.behun@xxxxxx>
• Re: [PATCH v5 2/3] dt-bindings: auxdisplay: Add bindings for generic 7-segment LED
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v5 02/10] locking/mutex: introduce devm_mutex_init
  • From: Christophe Leroy <christophe.leroy@xxxxxxxxxx>
• Re: [PATCH v5 02/10] locking/mutex: introduce devm_mutex_init
  • From: Waiman Long <longman@xxxxxxxxxx>
• Re: [PATCH v5 1/3] auxdisplay: Add 7-segment LED display driver
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v5 1/3] auxdisplay: Add 7-segment LED display driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v5 2/3] dt-bindings: auxdisplay: Add bindings for generic 7-segment LED
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] PCI/NPEM: Add Native PCIe Enclosure Management support
  • From: Lukas Wunner <lukas@xxxxxxxxx>
• Re: [PATCH v5 0/3] auxdisplay: 7-segment LED display
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v5 02/10] locking/mutex: introduce devm_mutex_init
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v5 02/10] locking/mutex: introduce devm_mutex_init
  • From: Marek Behún <marek.behun@xxxxxx>
• [PATCH v5 09/10] leds: an30259a: use devm_mutext_init for mutext initialization
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• [PATCH v5 06/10] leds: lm3532: use devm API to cleanup module's resources
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• [PATCH v5 04/10] leds: aw200xx: use devm API to cleanup module's resources
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• [PATCH v5 07/10] leds: nic78bx: use devm API to cleanup module's resources
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• [PATCH v5 02/10] locking/mutex: introduce devm_mutex_init
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• [PATCH v5 00/10] devm_led_classdev_register() usage problem
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• [PATCH v5 03/10] leds: aw2013: use devm API to cleanup module's resources
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• [PATCH v5 10/10] leds: powernv: use LED_RETAIN_AT_SHUTDOWN flag for leds
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• [PATCH v5 01/10] locking/mutex: move mutex_destroy() definition lower
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• [PATCH v5 08/10] leds: mlxreg: use devm_mutex_init for mutex initializtion
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• [PATCH v5 05/10] leds: lp3952: use devm API to cleanup module's resources
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• [PATCH v5 1/3] auxdisplay: Add 7-segment LED display driver
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v5 3/3] ARM: dts: marvell: Add 7-segment LED display on x530
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v5 2/3] dt-bindings: auxdisplay: Add bindings for generic 7-segment LED
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v5 0/3] auxdisplay: 7-segment LED display
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] PCI/NPEM: Add Native PCIe Enclosure Management support
  • From: Bjorn Helgaas <helgaas@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: qcom-lpg: Document PM6150L compatible
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 2/2] arm64: dts: qcom: pm6150l: add Light Pulse Generator device node
  • From: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 61996c073c9b070922ad3a36c981ca6ddbea19a5
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH 0/2] Add LPG/PWM support for PM6150L PMIC
  • From: Danila Tikhonov <danila@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: leds: qcom-lpg: Document PM6150L compatible
  • From: Danila Tikhonov <danila@xxxxxxxxxxx>
• [PATCH 2/2] arm64: dts: qcom: pm6150l: add Light Pulse Generator device node
  • From: Danila Tikhonov <danila@xxxxxxxxxxx>
• Re: [PATCH v4 1/3] auxdisplay: Add 7-segment LED display driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [regression] stm32mp1xx based targets stopped entering suspend if pwm-leds exist
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS 535a2262514d7d4016411707c9f8ac106062615f
  • From: kernel test robot <lkp@xxxxxxxxx>
• [regression] stm32mp1xx based targets stopped entering suspend if pwm-leds exist
  • From: "Linux regression tracking (Thorsten Leemhuis)" <regressions@xxxxxxxxxxxxx>
• [PATCH v4 1/2] platform: x86-android-tablets: other: Add swnode for Xiaomi pad2 indicator LED
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• [PATCH v4 2/2] leds: rgb: leds-ktd202x: Get device properties through fwnode to support ACPI
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• [PATCH v4 0/2] KTD2026 indicator LED for X86 Xiaomi Pad2
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• Re: [PATCH v4 1/3] auxdisplay: Add 7-segment LED display driver
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 11afac187274a6177a7ac82997f8691c0f469e41
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 0/3] leds: trigger: Improve handling of led_trigger_event() and simplify mute audio trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 0/3] leds: trigger: Improve handling of led_trigger_event() and simplify mute audio trigger
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: (subset) [PATCH] leds: ncp5623: Add MS suffix to time defines
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v4 1/3] auxdisplay: Add 7-segment LED display driver
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v2 0/3] leds: trigger: Improve handling of led_trigger_event() and simplify mute audio trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: pca963x: Convert text bindings to YAML
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH] leds: ncp5623: Add MS suffix to time defines
  • From: Abdel Alkuor <alkuor@xxxxxxxxx>
• Re: [PATCH v2 0/3] leds: trigger: Improve handling of led_trigger_event() and simplify mute audio trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 0/3] leds: trigger: Improve handling of led_trigger_event() and simplify mute audio trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 0/4] leds: trigger: Improve handling of led_trigger_event() and simplify mute audio trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 2/2] leds: Add NCP5623 multi-led driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v3 1/2] dt-bindings: leds: Add NCP5623 multi-LED Controller
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v3 2/2] leds: Add NCP5623 multi-led driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 0/4] leds: trigger: Improve handling of led_trigger_event() and simplify mute audio trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 0/4] leds: trigger: Improve handling of led_trigger_event() and simplify mute audio trigger
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 0/4] leds: trigger: Improve handling of led_trigger_event() and simplify mute audio trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 0/3] leds: trigger: Improve handling of led_trigger_event() and simplify mute audio trigger
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH v2 2/2] leds: Add NCP5623 multi-led driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v4 1/3] auxdisplay: Add 7-segment LED display driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/3] dt-bindings: auxdisplay: Add bindings for generic 7-segment LED
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v4 1/3] auxdisplay: Add 7-segment LED display driver
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 2/2] leds: rgb: leds-ktd202x: Get device properties through fwnode to support ACPI
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• [PATCH v3 2/2] leds: Add NCP5623 multi-led driver
  • From: Abdel Alkuor <alkuor@xxxxxxxxx>
• [PATCH v3 1/2] dt-bindings: leds: Add NCP5623 multi-LED Controller
  • From: Abdel Alkuor <alkuor@xxxxxxxxx>
• [PATCH v4 1/3] auxdisplay: Add 7-segment LED display driver
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 3/3] ARM: dts: marvell: Add 7-segment LED display on x530
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 0/3] auxdisplay: 7-segment LED display
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v4 2/3] dt-bindings: auxdisplay: Add bindings for generic 7-segment LED
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: Add NCP5623 multi-led driver
  • From: Abdel Alkuor <alkuor@xxxxxxxxx>
• [PATCH] dt-bindings: leds: pca963x: Convert text bindings to YAML
  • From: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
• [PATCH v2 3/3] leds: trigger: audio: Remove this trigger
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 2/3] ALSA: control-led: Integrate mute led trigger
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 1/3] leds: trigger: Store brightness set by led_trigger_event()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v2 0/3] leds: trigger: Improve handling of led_trigger_event() and simplify mute audio trigger
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v3 4/4] ARM: dts: marvell: Indicate USB activity on x530
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 4/4] ARM: dts: marvell: Indicate USB activity on x530
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v3 4/4] ARM: dts: marvell: Indicate USB activity on x530
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 4/4] ARM: dts: marvell: Indicate USB activity on x530
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [RESEND] dt-bindings: leds: pwm-multicolour: re-allow active-low
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• Re: [PATCH v3 1/4] auxdisplay: Add 7-segment LED display driver
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] auxdisplay: Add 7-segment LED display driver
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] Input: leds: Change config symbol dependency for audio mute trigger
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v3 1/4] auxdisplay: Add 7-segment LED display driver
  • From: Yury Norov <yury.norov@xxxxxxxxx>
• Re: [PATCH v3 4/4] ARM: dts: marvell: Indicate USB activity on x530
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 1/4] auxdisplay: Add 7-segment LED display driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v3 4/4] ARM: dts: marvell: Indicate USB activity on x530
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v3 1/4] auxdisplay: Add 7-segment LED display driver
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: Add LED_FUNCTION_WAN_ONLINE for Internet access
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 4/4] ARM: dts: marvell: Indicate USB activity on x530
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• [PATCH] Input: leds: Change config symbol dependency for audio mute trigger
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 0/4] leds: trigger: Improve handling of led_trigger_event() and simplify mute audio trigger
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 1870cdc0e8dee32e3c221704a2977898ba4c10e8
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v3 0/4] auxdisplay: 7 segment LED display
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v3 4/4] ARM: dts: marvell: Indicate USB activity on x530
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v3 3/4] ARM: dts: marvell: Add 7-segment LED display on x530
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v3 2/4] dt-bindings: auxdisplay: Add bindings for generic 7-segment LED
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v3 1/4] auxdisplay: Add 7-segment LED display driver
  • From: Andy Shevchenko <andy@xxxxxxxxxx>
• Re: [PATCH v2 6/6] net: phy: DP83640: Add fiber mode enabling/disabling from device tree
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v3 2/2] leds: rgb: leds-ktd202x: Get device properties through fwnode to support ACPI
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] net: phy: DP83640: Add fiber mode enabling/disabling from device tree
  • From: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>
• Re: [PATCH v2 2/2] leds: Add NCP5623 multi-led driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [RESEND] dt-bindings: leds: pwm-multicolour: re-allow active-low
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v3 2/2] leds: rgb: leds-ktd202x: Get device properties through fwnode to support ACPI
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• [PATCH v3 1/2] platform: x86-android-tablets: other: Add swnode for Xiaomi pad2 indicator LED
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• [PATCH v3 0/2] KTD2026 indicator LED for X86 Xiaomi Pad2
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• [PATCH v3 4/4] ARM: dts: marvell: Indicate USB activity on x530
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 2/4] dt-bindings: auxdisplay: Add bindings for generic 7-segment LED
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 0/4] auxdisplay: 7 segment LED display
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 1/4] auxdisplay: Add 7-segment LED display driver
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v3 3/4] ARM: dts: marvell: Add 7-segment LED display on x530
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION f303a3e2bcfba900efb5aee55236d17030e9f882
  • From: kernel test robot <lkp@xxxxxxxxx>
• [RESEND] dt-bindings: leds: pwm-multicolour: re-allow active-low
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH] leds: fix 3 drivers' kernel-doc warnings
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: fix ifdef check for gpio_led_register_device()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: qcom-lpg: Drop redundant qcom,pm8550-pwm in if:then:
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 0/4] leds: trigger: Improve handling of led_trigger_event() and simplify mute audio trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v2 1/1] leds: expresswire: Don't use "proxy" headers
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] dt-bindings: leds: Add LED_FUNCTION_WAN_ONLINE for Internet access
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 2/6] leds: trigger: Create a new LED netdev trigger for collision
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] net: phy: DP83640: Add fiber mode enabling/disabling from device tree
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 2/6] leds: trigger: Create a new LED netdev trigger for collision
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: auxdisplay: Add bindings for generic 7 segment LED
  • From: "andy@xxxxxxxxxx" <andy@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: auxdisplay: Add bindings for generic 7 segment LED
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: auxdisplay: Add bindings for generic 7 segment LED
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: auxdisplay: Add bindings for generic 7 segment LED
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] net: phy: DP83640: Add fiber mode enabling/disabling from device tree
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• Re: [PATCH v2 3/6] net: phy: DP83640: Add LED handling
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• Re: [PATCH v2 2/6] leds: trigger: Create a new LED netdev trigger for collision
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• RE: [PATCH] leds: fix 3 drivers' kernel-doc warnings
  • From: Vadim Pasternak <vadimp@xxxxxxxxxx>
• [PATCH v2 3/3] leds: mlxreg: drop an excess struct mlxreg_led_data member
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v2 1/3] leds: lm3601x: fix struct lm3601_led kernel-doc warnings
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH] leds: fix 3 drivers' kernel-doc warnings
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH v2 2/3] leds: leds-mlxcpld: fix struct mlxcpld_led_priv member name
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [linux-next:master] BUILD REGRESSION 20af1ca418d2c0b11bc2a1fe8c0c88f67bcc2a7e
  • From: Lucas De Marchi <lucas.demarchi@xxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: auxdisplay: Add bindings for generic 7 segment LED
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/4] auxdisplay: 7 segment LED display
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 20af1ca418d2c0b11bc2a1fe8c0c88f67bcc2a7e
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: auxdisplay: Add bindings for generic 7 segment LED
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 3/6] net: phy: DP83640: Add LED handling
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: auxdisplay: Add bindings for generic 7 segment LED
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: auxdisplay: Add bindings for generic 7 segment LED
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v2 1/6] dt-bindings: net: Add bindings for PHY DP83640
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH] leds: fix ifdef check for gpio_led_register_device()
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: auxdisplay: Add bindings for generic 7 segment LED
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 4/4] ARM: dts: marvell: Indicate USB activity on x530
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] devm-helpers: Add resource managed version of mutex init
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 0/4] auxdisplay: 7 segment LED display
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] ARM: dts: marvell: Add 7 segment LED display on x530
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 4/4] ARM: dts: marvell: Indicate USB activity on x530
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 0/4] auxdisplay: 7 segment LED display
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: auxdisplay: Add bindings for generic 7 segment LED
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/4] auxdisplay: Add 7 segment LED display driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v2 1/4] auxdisplay: Add 7 segment LED display driver
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH v2 2/4] dt-bindings: auxdisplay: Add bindings for generic 7 segment LED
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH v2 1/4] auxdisplay: Add 7 segment LED display driver
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 4/4] ARM: dts: marvell: Indicate USB activity on x530
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 0/4] auxdisplay: 7 segment LED display
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 2/4] dt-bindings: auxdisplay: Add bindings for generic 7 segment LED
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH v2 3/4] ARM: dts: marvell: Add 7 segment LED display on x530
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/6] leds: trigger: Create a new LED netdev trigger for collision
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 6/6] net: phy: DP83640: Add fiber mode enabling/disabling from device tree
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v2 2/6] leds: trigger: Create a new LED netdev trigger for collision
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 0/3] auxdisplay: 7 segment LED display
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 0/3] auxdisplay: 7 segment LED display
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH RESEND 0/2] leds: gpio: Add devlink between the leds-gpio device and the gpio used.
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• Re: [PATCH v2 6/6] net: phy: DP83640: Add fiber mode enabling/disabling from device tree
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/6] net: phy: DP83640: Add LED handling
  • From: "Russell King (Oracle)" <linux@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 5/6] net: phy: DP83640: Explicitly disabling PHY Control Frames
  • From: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>
• Re: [PATCH v2 4/6] net: phy: DP83640: Add EDPD management
  • From: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>
• Re: [PATCH v2 3/6] net: phy: DP83640: Add LED handling
  • From: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>
• [PATCH v2 5/6] net: phy: DP83640: Explicitly disabling PHY Control Frames
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• [PATCH v2 6/6] net: phy: DP83640: Add fiber mode enabling/disabling from device tree
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• [PATCH v2 2/6] leds: trigger: Create a new LED netdev trigger for collision
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• [PATCH v2 1/6] dt-bindings: net: Add bindings for PHY DP83640
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• [PATCH v2 4/6] net: phy: DP83640: Add EDPD management
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• [PATCH v2 3/6] net: phy: DP83640: Add LED handling
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• [PATCH v2 0/6] net: phy: Add TI's DP83640 device tree binding
  • From: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
• Re: [PATCH 0/3] auxdisplay: 7 segment LED display
  • From: Alexander Dahl <ada@xxxxxxxxxxx>
• Re: [PATCH 2/2] dt-bindings: leds: qcom-lpg: Narrow nvmem for other variants
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: leds: qcom-lpg: Drop redundant qcom,pm8550-pwm in if:then:
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/3] auxdisplay: 7 segment LED display
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 0/3] auxdisplay: 7 segment LED display
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/3] auxdisplay: 7 segment LED display
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 8552c902efe7ef670b6961fb8885b67961aeb629
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 3/4] Input: leds: Prepare for removal of config option LEDS_AUDIO_TRIGGER
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH 0/3] auxdisplay: 7 segment LED display
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH 0/3] auxdisplay: 7 segment LED display
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 0/3] auxdisplay: 7 segment LED display
  • From: Alexander Dahl <ada@xxxxxxxxxxx>
• Re: [PATCH v2 1/1] leds: expresswire: Don't use "proxy" headers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] leds: expresswire: Don't use "proxy" headers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 1/1] leds: expresswire: Don't use "proxy" headers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• Re: [PATCH 3/3] dt-bindings: leds: leds-qcom-lpg: Add support for PMI8950 PWM
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: Add LED_FUNCTION_WAN_ONLINE for Internet access
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• [PATCH 3/3] dt-bindings: leds: leds-qcom-lpg: Add support for PMI8950 PWM
  • From: Gianluca Boiano <morf3089@xxxxxxxxx>
• [PATCH 2/3] arm64: dts: qcom: pmi8950: add pwm node
  • From: Gianluca Boiano <morf3089@xxxxxxxxx>
• [PATCH 1/3] leds: qcom-lpg: Add support for PMI8950 PWM
  • From: Gianluca Boiano <morf3089@xxxxxxxxx>
• Re: [PATCH v2 1/3] leds: qcom-lpg: Add support for PMI8950 PWM
  • From: Konrad Dybcio <konrad.dybcio@xxxxxxxxxx>
• [PATCH v2 3/3] dt-bindings: leds: leds-qcom-lpg: Add support for PMI8950 PWM
  • From: Gianluca Boiano <morf3089@xxxxxxxxx>
• [PATCH v2 2/3] arm64: dts: qcom: pmi8950: add pwm node
  • From: Gianluca Boiano <morf3089@xxxxxxxxx>
• [PATCH v2 1/3] leds: qcom-lpg: Add support for PMI8950 PWM
  • From: Gianluca Boiano <morf3089@xxxxxxxxx>
• Re: [PATCH 2/3] dt-bindings: leds: leds-qcom-lpg: Add support for PMI8950 PWM
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 2/2] dt-bindings: leds: qcom-lpg: Narrow nvmem for other variants
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH 1/2] dt-bindings: leds: qcom-lpg: Drop redundant qcom,pm8550-pwm in if:then:
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH 1/3] auxdisplay: Add 7 segment LED display driver
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH 1/3] auxdisplay: Add 7 segment LED display driver
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 0/3] auxdisplay: 7 segment LED display
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] leds: mlxreg: fix a kernel-doc warning
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH 1/3] auxdisplay: Add 7 segment LED display driver
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 0/3] auxdisplay: 7 segment LED display
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 2/3] dt-bindings: auxdisplay: Add bindings for generic 7 segment LED
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] ARM: dts: marvell: Add 7 segment LED display on x530
  • From: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
• [PATCH 3/3] arm64: dts: qcom: pmi8950: add pwm node
  • From: Gianluca Boiano <morf3089@xxxxxxxxx>
• [PATCH 2/3] dt-bindings: leds: leds-qcom-lpg: Add support for PMI8950 PWM
  • From: Gianluca Boiano <morf3089@xxxxxxxxx>
• [PATCH 1/3] leds: qcom-lpg: Add support for PMI8950 PWM
  • From: Gianluca Boiano <morf3089@xxxxxxxxx>
• Re: [PATCH v2 1/1] leds: expresswire: Don't use "proxy" headers
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: [PATCH v2 1/1] leds: expresswire: Don't use "proxy" headers
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS 3e7b2b9309cd3eb1b82121b8a978d2dd19301924
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH 3/4] Input: leds: Prepare for removal of config option LEDS_AUDIO_TRIGGER
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: sun50i-a64-pinephone: add multicolor led node
  • From: Aren <aren@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: sun50i-a64-pinephone: add multicolor led node
  • From: Ondřej Jirman <megi@xxxxxx>
• Re: [PATCH 3/4] Input: leds: Prepare for removal of config option LEDS_AUDIO_TRIGGER
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 1/1] leds: expresswire: Don't use "proxy" headers
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v2 1/1] leds: expresswire: Don't use "proxy" headers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v1 1/1] leds: expresswire: Don't use "proxy" headers
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 33e1d31873f87d119e5120b88cd350efa68ef276
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: pwm-multicolour: re-allow active-low
  • From: Conor Dooley <conor@xxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: sun50i-a64-pinephone: change led type to status
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: sun50i-a64-pinephone: change led type to status
  • From: Aren <aren@xxxxxxxxxxxxxxxxx>
• Re: (subset) [PATCH] dt-bindings: backlight: qcom-wled: Fix bouncing email addresses
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: Add NCP5623 multi-led driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: sgm3140: Add missing timer cleanup and flash gpio control
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [linux-next:master] BUILD REGRESSION e31185ce00a96232308300008db193416ceb9769
  • From: John Paul Adrian Glaubitz <glaubitz@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 0/4] leds: trigger: Improve handling of led_trigger_event() and simplify mute audio trigger
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 0/4] leds: trigger: Improve handling of led_trigger_event() and simplify mute audio trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 0/4] leds: trigger: Improve handling of led_trigger_event() and simplify mute audio trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 0/2] leds: expresswire: Fix dependencies
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 0/4] leds: trigger: Improve handling of led_trigger_event() and simplify mute audio trigger
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [linux-next:master] BUILD REGRESSION e31185ce00a96232308300008db193416ceb9769
  • From: Kees Cook <kees@xxxxxxxxxx>
• Re: [PATCH 0/4] leds: trigger: Improve handling of led_trigger_event() and simplify mute audio trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: pwm-multicolour: re-allow active-low
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: ktd2692: add gpiolib dependency
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v2 1/4] leds: rgb: leds-group-multicolor: allow leds to stay on in suspend
  • From: Aren <aren@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: sun50i-a64-pinephone: add multicolor led node
  • From: Aren <aren@xxxxxxxxxxxxxxxxx>
• Re: (subset) [PATCH v4 01/10] leds: aw2013: unlock mutex before destroying it
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: qcom-lpg: add QCOM_PBS dependency
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: Linux support for a 7 segment LED display
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH] leds: trigger/tty: Use led_set_brightness() to support all use cases
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: trigger/tty: Use led_set_brightness() to support all use cases
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: Linux support for a 7 segment LED display
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: Linux support for a 7 segment LED display
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 1/2] devm-helpers: Add resource managed version of mutex init
  • From: Marek Behún <kabel@xxxxxxxxxx>
• [PATCH] dt-bindings: leds: Add LED_FUNCTION_WAN_ONLINE for Internet access
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH] leds: mlxreg: fix a kernel-doc warning
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: mlxreg: fix a kernel-doc warning
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v2 1/4] leds: rgb: leds-group-multicolor: allow leds to stay on in suspend
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v2 1/4] leds: rgb: leds-group-multicolor: allow leds to stay on in suspend
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 4/4] arm64: dts: sun50i-a64-pinephone: change led type to status
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 1/4] leds: rgb: leds-group-multicolor: allow leds to stay on in suspend
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: Future handling of complex RGB devices on Linux v2
  • From: Thomas Zimmermann <tzimmermann@xxxxxxx>
• Re: Future handling of complex RGB devices on Linux v2
  • From: Pekka Paalanen <pekka.paalanen@xxxxxxxxxxxxx>
• Re: [PATCH v2 3/4] arm64: dts: sun50i-a64-pinephone: add multicolor led node
  • From: Ondřej Jirman <megi@xxxxxx>
• Re: Future handling of complex RGB devices on Linux v2
  • From: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
• Re: Linux support for a 7 segment LED display
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: Linux support for a 7 segment LED display
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: Linux support for a 7 segment LED display
  • From: Pavel Machek <pavel@xxxxxx>
• [linux-next:master] BUILD REGRESSION e31185ce00a96232308300008db193416ceb9769
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: Linux support for a 7 segment LED display
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: Linux support for a 7 segment LED display
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Linux support for a 7 segment LED display
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: Linux support for a 7 segment LED display
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: Linux support for a 7 segment LED display
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: Linux support for a 7 segment LED display
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 1/2] devm-helpers: Add resource managed version of mutex init
  • From: andy.shevchenko@xxxxxxxxx
• Re: [RESEND PATCH v2 1/1] leds: simatic-ipc-leds-gpio: add support for module BX-59A
  • From: andy.shevchenko@xxxxxxxxx
• Re: [PATCH v2 1/4] leds: rgb: leds-group-multicolor: allow leds to stay on in suspend
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Linux support for a 7 segment LED display
  • From: andy.shevchenko@xxxxxxxxx
• Re: [PATCH v2 4/4] arm64: dts: sun50i-a64-pinephone: change led type to status
  • From: Jernej Škrabec <jernej.skrabec@xxxxxxxxx>
• Re: [PATCH 1/2] devm-helpers: Add resource managed version of mutex init
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Future handling of complex RGB devices on Linux v2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Future handling of complex RGB devices on Linux v2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Future handling of complex RGB devices on Linux v2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Future handling of complex RGB devices on Linux v2
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH 1/2] devm-helpers: Add resource managed version of mutex init
  • From: Matthew Auld <matthew.auld@xxxxxxxxx>
• Re: [PATCH 1/2] devm-helpers: Add resource managed version of mutex init
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] devm-helpers: Add resource managed version of mutex init
  • From: Guenter Roeck <linux@xxxxxxxxxxxx>
• Re: [PATCH 1/2] devm-helpers: Add resource managed version of mutex init
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 1/2] devm-helpers: Add resource managed version of mutex init
  • From: Marek Behún <kabel@xxxxxxxxxx>
• Re: Future handling of complex RGB devices on Linux v3
  • From: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
• Re: Future handling of complex RGB devices on Linux v2
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Future handling of complex RGB devices on Linux v2
  • From: Gregor Riepl <onitake@xxxxxxxxx>
• Re: Future handling of complex RGB devices on Linux v2
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Future handling of complex RGB devices on Linux v2
  • From: Pekka Paalanen <pekka.paalanen@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] gpiolib: Introduce gpiod_device_add_link()
  • From: Saravana Kannan <saravanak@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: gpio: Add devlinks between the gpio consumed and the gpio leds device
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 1/2] gpiolib: Introduce gpiod_device_add_link()
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Future handling of complex RGB devices on Linux v2
  • From: Pavel Machek <pavel@xxxxxx>
• [linux-next:master] BUILD REGRESSION 4893c639cc3659cefaa675bf1e59f4e7571afb5c
  • From: kernel test robot <lkp@xxxxxxxxx>
• Future handling of complex RGB devices on Linux v2
  • From: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
• [PATCH] leds: mlxreg: fix a kernel-doc warning
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH] leds: leds-mlxcpld: fix kernel-doc warnings
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [PATCH] leds: lm3601x: fix all kernel-doc warnings
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• [linux-next:master] BUILD REGRESSION 2d5c7b7eb345249cb34d42cbc2b97b4c57ea944e
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH RESEND 0/2] leds: gpio: Add devlink between the leds-gpio device and the gpio used.
  • From: Saravana Kannan <saravanak@xxxxxxxxxx>
• Re: Linux support for a 7 segment LED display
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH RESEND 0/2] leds: gpio: Add devlink between the leds-gpio device and the gpio used.
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• Re: [PATCH RESEND 0/2] leds: gpio: Add devlink between the leds-gpio device and the gpio used.
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• Re: [PATCH RESEND 0/2] leds: gpio: Add devlink between the leds-gpio device and the gpio used.
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• Re: [PATCH RESEND 0/2] leds: gpio: Add devlink between the leds-gpio device and the gpio used.
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH RESEND 2/2] leds: gpio: Add devlinks between the gpio consumed and the gpio leds device
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH RESEND 1/2] gpiolib: Introduce gpiod_device_add_link()
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH RESEND 0/2] leds: gpio: Add devlink between the leds-gpio device and the gpio used.
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• Re: [PATCH 0/2] leds: gpio: Add devlink between the leds-gpio device and the gpio used.
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• Re: [PATCH 0/2] leds: gpio: Add devlink between the leds-gpio device and the gpio used.
  • From: Bartosz Golaszewski <brgl@xxxxxxxx>
• [PATCH 1/2] gpiolib: Introduce gpiod_device_add_link()
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH 2/2] leds: gpio: Add devlinks between the gpio consumed and the gpio leds device
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• [PATCH 0/2] leds: gpio: Add devlink between the leds-gpio device and the gpio used.
  • From: Herve Codina <herve.codina@xxxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: leds: Add NCP5623 multi-LED Controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: Linux support for a 7 segment LED display
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 0/3] KTD2026 indicator LED for X86 Xiaomi Pad2
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• Re: [PATCH v2 3/3] leds: rgb: leds-ktd202x: Skip regulator settings for Xiaomi pad2
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• Re: [PATCH v2 1/3] platform: x86-android-tablets: other: Add swnode for Xiaomi pad2 indicator LED
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• Re: Linux support for a 7 segment LED display
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: Linux support for a 7 segment LED display
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: Linux support for a 7 segment LED display
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Linux support for a 7 segment LED display
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2 1/3] platform: x86-android-tablets: other: Add swnode for Xiaomi pad2 indicator LED
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 3/3] leds: rgb: leds-ktd202x: Skip regulator settings for Xiaomi pad2
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH v2 0/3] KTD2026 indicator LED for X86 Xiaomi Pad2
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 3/3] leds: rgb: leds-ktd202x: Skip regulator settings for Xiaomi pad2
  • From: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
• [RESEND PATCH v2 0/1] Patch Resent: Enabling LED Support for Siemens IPC BX-59A
  • From: Xing Tong Wu <xingtong_wu@xxxxxxx>
• [RESEND PATCH v2 1/1] leds: simatic-ipc-leds-gpio: add support for module BX-59A
  • From: Xing Tong Wu <xingtong_wu@xxxxxxx>
• [PATCH v2 2/2] leds: Add NCP5623 multi-led driver
  • From: Abdel Alkuor <alkuor@xxxxxxxxx>
• [PATCH v2 1/2] dt-bindings: leds: Add NCP5623 multi-LED Controller
  • From: Abdel Alkuor <alkuor@xxxxxxxxx>
• Re: [PATCH 2/2] leds: Add NCP5623 multi-led driver
  • From: Abdel Alkuor <alkuor@xxxxxxxxx>
• [PATCH] leds: sgm3140: Add missing timer cleanup and flash gpio control
  • From: Ondřej Jirman <megi@xxxxxx>
• [PATCH v2 1/2] Revert "leds: Only descend into leds directory when CONFIG_NEW_LEDS is set"
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH v2 2/2] leds: expresswire: don't depend on NEW_LEDS
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH v2 0/2] leds: expresswire: Fix dependencies
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH v2 3/3] leds: rgb: leds-ktd202x: Skip regulator settings for Xiaomi pad2
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• [PATCH v2 2/3] leds: rgb: leds-ktd202x: Get device properties through fwnode to support ACPI
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• [PATCH v2 1/3] platform: x86-android-tablets: other: Add swnode for Xiaomi pad2 indicator LED
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• [PATCH v2 0/3] KTD2026 indicator LED for X86 Xiaomi Pad2
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• Re: [PATCH 0/4] leds: trigger: Improve handling of led_trigger_event() and simplify mute audio trigger
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: pwm-multicolour: re-allow active-low
  • From: Rob Herring <robh@xxxxxxxxxx>
• [PATCH 2/2] PCI/NPEM: Add Native PCIe Enclosure Management support
  • From: Mariusz Tkaczyk <mariusz.tkaczyk@xxxxxxxxxxxxxxx>
• [PATCH 1/2] leds: Init leds class earlier
  • From: Mariusz Tkaczyk <mariusz.tkaczyk@xxxxxxxxxxxxxxx>
• [PATCH 0/2] Native PCIe Enclosure Management
  • From: Mariusz Tkaczyk <mariusz.tkaczyk@xxxxxxxxxxxxxxx>
• Re: [PATCH] backlight: ktd2801: depend on GPIOLIB
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: [PATCH v6 003/164] pwm: Provide pwmchip_alloc() function and a devm variant of it
  • From: Nuno Sá <noname.nuno@xxxxxxxxx>
• Re: [PATCH] backlight: ktd2801: depend on GPIOLIB
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH 0/4] leds: trigger: Improve handling of led_trigger_event() and simplify mute audio trigger
  • From: Takashi Iwai <tiwai@xxxxxxx>
• Re: [PATCH 2/2] leds: expresswire: don't depend on NEW_LEDS
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: [PATCH v6 003/164] pwm: Provide pwmchip_alloc() function and a devm variant of it
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v6 000/164] pwm: Improve lifetime tracking for pwm_chips
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 1/2] Revert "leds: Only descend into leds directory when CONFIG_NEW_LEDS is set"
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: expresswire: don't depend on NEW_LEDS
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH] leds: ktd2692: add gpiolib dependency
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH] backlight: ktd2801: depend on GPIOLIB
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: rgb: leds-ktd202x: Get device properties through fwnode to support ACPI
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• Re: [PATCH v5] Add multicolor support to BlinkM LED driver
  • From: Joseph Strauss <jstrauss@xxxxxxxxxxx>
• Re: [PATCH v6 003/164] pwm: Provide pwmchip_alloc() function and a devm variant of it
  • From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
• [PATCH v6 154/164] leds: qcom-lpg: Make use of devm_pwmchip_alloc() function
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v6 003/164] pwm: Provide pwmchip_alloc() function and a devm variant of it
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v6 000/164] pwm: Improve lifetime tracking for pwm_chips
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [DMARC error][SPF error] Re: [PATCH v4 00/10] devm_led_classdev_register() usage problem
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• [PATCH] dt-bindings: leds: pwm-multicolour: re-allow active-low
  • From: Conor Dooley <conor@xxxxxxxxxx>
• [PATCH] backlight: ktd2801: depend on GPIOLIB
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH] leds: ktd2692: add gpiolib dependency
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [DMARC error][SPF error] Re: [PATCH v4 00/10] devm_led_classdev_register() usage problem
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH 2/2] leds: Add NCP5623 multi-led driver
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH 4/4] leds: trigger: audio: Remove this trigger
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 3/4] Input: leds: Prepare for removal of config option LEDS_AUDIO_TRIGGER
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 2/4] ALSA: control-led: Integrate mute led trigger
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 1/4] leds: trigger: Store brightness set by led_trigger_event()
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH 0/4] leds: trigger: Improve handling of led_trigger_event() and simplify mute audio trigger
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [DMARC error][SPF error] Re: [PATCH v4 00/10] devm_led_classdev_register() usage problem
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] leds: qcom-lpg: add QCOM_PBS dependency
  • From: Jean Delvare <jdelvare@xxxxxxx>
• [PATCH 2/2] leds: expresswire: don't depend on NEW_LEDS
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH 0/2] leds: expresswire: Fix dependencies
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH 1/2] Revert "leds: Only descend into leds directory when CONFIG_NEW_LEDS is set"
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH] leds: qcom-lpg: add QCOM_PBS dependency
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [DMARC error][SPF error] Re: [PATCH v4 00/10] devm_led_classdev_register() usage problem
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [DMARC error][SPF error] Re: [PATCH v4 00/10] devm_led_classdev_register() usage problem
  • From: George Stark <gnstark@xxxxxxxxxxxxxxxxx>
• Linux support for a 7 segment LED display
  • From: Chris Packham <Chris.Packham@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH 2/2] leds: Add NCP5623 multi-led driver
  • From: Abdel Alkuor <alkuor@xxxxxxxxx>
• Re: (subset) [PATCH v3] leds: pca963x: Add power management support
  • From: Amitesh Singh <singh.amitesh@xxxxxxxxx>
• Re: [PATCH v4 00/10] devm_led_classdev_register() usage problem
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• Re: [PATCH v4 00/10] devm_led_classdev_register() usage problem
  • From: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
• [lee-leds:for-leds-next] BUILD SUCCESS 12ce20e02e532f101b725d71c52a36c5cc8ad1e6
  • From: kernel test robot <lkp@xxxxxxxxx>
• [lee-leds:for-mfd-next] BUILD SUCCESS eb0b64130e016814eed1e60e7f203413448da280
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH] dt-bindings: backlight: qcom-wled: Fix bouncing email addresses
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: linux-next: Tree for Feb 5 (drivers/leds/rgb/leds-qcom-lpg.o)
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: trigger: netdev: Fix kernel panic on interface rename trig notify
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: trigger: netdev: Fix kernel panic on interface rename trig notify
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v1 1/2] leds: aw200xx: support for hw pattern controllers
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v1 1/2] leds: aw200xx: support for hw pattern controllers
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: Add NCP5623 multi-led driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v5] leds: qcom-lpg: Add PM660L configuration and compatible
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: spi-byte: use devm_led_classdev_register_ext()
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH RESEND 1/1] leds: simatic-ipc-leds-gpio: add support for module BX-59A
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v3] leds: pca963x: Add power management support
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: Re: [PATCH v8 3/7] soc: qcom: add QCOM PBS driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: trigger: stop exporting trigger_list
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: (subset) [PATCH] leds: trigger: stop exporting trigger_list
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: trigger: stop exporting trigger_list
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: (subset) [PATCH] leds: triggers: Add helper led_match_default_trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: trigger: stop exporting trigger_list
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: trigger: stop exporting trigger_list
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 2/2] leds: rgb: leds-ktd202x: Get device properties through fwnode to support ACPI
  • From: André Apitzsch <git@xxxxxxxxxxx>
• Re: [PATCH] dt-bindings: backlight: qcom-wled: Fix bouncing email addresses
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• [PATCH 2/2] leds: rgb: leds-ktd202x: Get device properties through fwnode to support ACPI
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• [PATCH 1/2] platform: x86-android-tablets: other: Add swnode for Xiaomi pad2 indicator LED
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• [PATCH 0/2] KTD2026 indicator LED for X86 Xiaomi Pad2
  • From: Kate Hsuan <hpa@xxxxxxxxxx>
• [PATCH v2 4/4] arm64: dts: sun50i-a64-pinephone: change led type to status
  • From: Aren Moynihan <aren@xxxxxxxxxxxxxxxxx>
• [PATCH v2 3/4] arm64: dts: sun50i-a64-pinephone: add multicolor led node
  • From: Aren Moynihan <aren@xxxxxxxxxxxxxxxxx>
• [PATCH v2 2/4] arm64: dts: sun50i-a64-pinephone: Retain leds state in suspend
  • From: Aren Moynihan <aren@xxxxxxxxxxxxxxxxx>
• [PATCH v2 1/4] leds: rgb: leds-group-multicolor: allow leds to stay on in suspend
  • From: Aren Moynihan <aren@xxxxxxxxxxxxxxxxx>
• Re: linux-next: Tree for Feb 5 (drivers/leds/rgb/leds-qcom-lpg.o)
  • From: Randy Dunlap <rdunlap@xxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: backlight: qcom-wled: Fix bouncing email addresses
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Re: [PATCH 1/2] dt-bindings: soc: qcom: Add qcom,pbs bindings
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH] leds: trigger: netdev: Fix kernel panic on interface rename trig notify
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: trigger: netdev: Fix kernel panic on interface rename trig notify
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH] leds: trigger: netdev: Fix kernel panic on interface rename trig notify
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: trigger: netdev: Fix kernel panic on interface rename trig notify
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: trigger: netdev: Fix kernel panic on interface rename trig notify
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH] leds: trigger: netdev: Fix kernel panic on interface rename trig notify
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v1 1/2] leds: aw200xx: support for hw pattern controllers
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• Re: [PATCH] leds: trigger: netdev: Fix kernel panic on interface rename trig notify
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/2] dt: bindings: leds: Add NCP5623 multi-LED Controller
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• [PATCH v5] leds: qcom-lpg: Add PM660L configuration and compatible
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• Re: [PATCH v4 2/2] leds: qcom-lpg: Add PM660L configuration and compatible
  • From: Marijn Suijten <marijn.suijten@xxxxxxxxxxxxxx>
• [PATCH] leds: spi-byte: use devm_led_classdev_register_ext()
  • From: Stefan Kalscheuer <stefan@xxxxxxxxxxx>
• Re: [PATCH] leds: trigger: netdev: Fix kernel panic on interface rename trig notify
  • From: Andrew Lunn <andrew@xxxxxxx>
• [PATCH RESEND 1/1] leds: simatic-ipc-leds-gpio: add support for module BX-59A
  • From: Xing Tong Wu <xingtong_wu@xxxxxxx>
• [PATCH RESEND 0/1] Patch Resent: Enabling LED Support for Siemens IPC BX-59A
  • From: Xing Tong Wu <xingtong_wu@xxxxxxx>
• [PATCH] leds: trigger: netdev: Fix kernel panic on interface rename trig notify
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH 2/2] leds: Add NCP5623 multi-led driver
  • From: Abdel Alkuor <alkuor@xxxxxxxxx>
• [PATCH 1/2] dt: bindings: leds: Add NCP5623 multi-LED Controller
  • From: Abdel Alkuor <alkuor@xxxxxxxxx>
• [PATCH v3] leds: pca963x: Add power management support
  • From: Amitesh Singh <singh.amitesh@xxxxxxxxx>
• [PATCH] dt-bindings: backlight: qcom-wled: Fix bouncing email addresses
  • From: Jeffrey Hugo <quic_jhugo@xxxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: soc: qcom: Add qcom,pbs bindings
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: Re: [PATCH v8 3/7] soc: qcom: add QCOM PBS driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 2/3] leds: simatic-ipc-leds-gpio: add support for module BX-59A
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v2] leds/pca963x: implement power management
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/2] dt-bindings: soc: qcom: Add qcom,pbs bindings
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re:[PATCH 2/3] leds: simatic-ipc-leds-gpio: add support for module BX-59A
  • From: "xingtong.wu" <xingtong_wu@xxxxxxx>
• Re: [PATCH 0/2] Add QCOM PBS driver
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: Re: [PATCH v8 3/7] soc: qcom: add QCOM PBS driver
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: [PATCH v8 3/7] soc: qcom: add QCOM PBS driver
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 2/2] soc: qcom: add QCOM PBS driver
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 1/2] dt-bindings: soc: qcom: Add qcom,pbs bindings
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• [PATCH 0/2] Add QCOM PBS driver
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH v5 0/4] Kinetic ExpressWire library and KTD2801 backlight driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/4] leds: rgb: leds-group-multicolor: allow leds to stay on in suspend
  • From: Aren <aren@xxxxxxxxxxxxxxxxx>
• Re: Future handling of complex RGB devices on Linux
  • From: Roderick Colenbrander <thunderbird2k@xxxxxxxxx>
• [PATCH] leds: triggers: Add helper led_match_default_trigger
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH] leds: trigger: stop exporting trigger_list
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Future handling of complex RGB devices on Linux
  • From: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v8 3/7] soc: qcom: add QCOM PBS driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH 1/4] leds: rgb: leds-group-multicolor: allow leds to stay on in suspend
  • From: Jean-Jacques Hiblot <jjhiblot@xxxxxxxxxxxxxxx>
• Re: [PATCH v8 3/7] soc: qcom: add QCOM PBS driver
  • From: Bjorn Andersson <andersson@xxxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] leds: aw200xx: support for hw pattern controllers
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] leds: aw200xx: support for hw pattern controllers
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: [PATCH] leds/pca963x: implement power management
  • From: Amitesh Singh <singh.amitesh@xxxxxxxxx>
• [PATCH v2] leds/pca963x: implement power management
  • From: Amitesh Singh <singh.amitesh@xxxxxxxxx>
• [PATCH 1/4] leds: rgb: leds-group-multicolor: allow leds to stay on in suspend
  • From: Aren Moynihan <aren@xxxxxxxxxxxxxxxxx>
• Re: [net-next PATCH v10 0/5] net: phy: generic polarity + LED support for qca808x
  • From: patchwork-bot+netdevbpf@xxxxxxxxxx
• [lee-leds:for-leds-next] BUILD SUCCESS 54602f38551e89b520611ffb9df05232d1bf73f8
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [PATCH v1 1/2] leds: aw200xx: support for hw pattern controllers
  • From: Pavel Machek <pavel@xxxxxx>
• Re: [PATCH v5 040/111] pwm: Provide devm_pwmchip_alloc() function
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH v5 040/111] pwm: Provide devm_pwmchip_alloc() function
  • From: Alex Elder <elder@xxxxxxxx>
• Re: [PATCH v1 1/2] leds: aw200xx: support for hw pattern controllers
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH v1 1/2] leds: aw200xx: support for hw pattern controllers
  • From: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
• [net-next PATCH v10 5/5] net: phy: at803x: add LED support for qca808x
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v10 4/5] dt-bindings: net: Document QCA808x PHYs
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v10 3/5] net: phy: add support for PHY LEDs polarity modes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v10 2/5] dt-bindings: net: phy: Document LED inactive high impedance mode
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v10 1/5] dt-bindings: net: phy: Make LED active-low property common
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v10 0/5] net: phy: generic polarity + LED support for qca808x
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v5 3/4] dt-bindings: backlight: add Kinetic KTD2801 binding
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH v5 4/4] backlight: Add Kinetic KTD2801 backlight support
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH v5 2/4] leds: ktd2692: convert to use ExpressWire library
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH v5 1/4] leds: introduce ExpressWire library
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH v5 0/4] Kinetic ExpressWire library and KTD2801 backlight driver
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: [PATCH v5 039/111] pwm: Provide wrappers for storing and getting driver private data
  • From: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
• Re: [PATCH 1/2] leds: remove led_init_default_state_get() and devm_led_classdev_register_ext() stubs
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v4 1/3] leds: ktd2692: move ExpressWire code to library
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH][next] leds: aw200xx: make read-only array coeff_table static const
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: trigger: panic: simplify led_trigger_set_panic
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] dt-bindings: leds: add FUNCTION defines for per-band WLANs
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds/pca963x: implement power management
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds/pca963x: implement power management
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: triggers: default-on: Add module alias for module auto-loading
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v5] Add multicolor support to BlinkM LED driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: trigger: audio: Set module alias for module auto-loading
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v8 3/7] soc: qcom: add QCOM PBS driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v1 1/2] leds: aw200xx: support for hw pattern controllers
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v5 040/111] pwm: Provide devm_pwmchip_alloc() function
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v5 039/111] pwm: Provide wrappers for storing and getting driver private data
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v5 105/111] leds: qcom-lpg: Make use of devm_pwmchip_alloc() function
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• [PATCH v5 000/111] pwm: Improve lifetime tracking for pwm_chips
  • From: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
• Re: [PATCH 2/2] leds: make flash and multicolor dependencies unconditional
  • From: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
• [PATCH AUTOSEL 4.19 1/5] leds: trigger: panic: Don't register panic notifier if creating the trigger failed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.4 1/6] leds: trigger: panic: Don't register panic notifier if creating the trigger failed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.10 1/7] leds: trigger: panic: Don't register panic notifier if creating the trigger failed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 5.15 1/9] leds: trigger: panic: Don't register panic notifier if creating the trigger failed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.1 1/9] leds: trigger: panic: Don't register panic notifier if creating the trigger failed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.6 02/11] leds: trigger: panic: Don't register panic notifier if creating the trigger failed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• [PATCH AUTOSEL 6.7 02/13] leds: trigger: panic: Don't register panic notifier if creating the trigger failed
  • From: Sasha Levin <sashal@xxxxxxxxxx>
• Re: [PATCH] [RFC] net: phy: broadcom: Add DT LED configuration support
  • From: Marek Vasut <marex@xxxxxxx>
• Re: [PATCH v4 3/3] backlight: Add Kinetic KTD2801 backlight support
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v4 2/3] dt-bindings: backlight: add Kinetic KTD2801 binding
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v4 1/3] leds: ktd2692: move ExpressWire code to library
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
• Re: [net-next PATCH v9 0/5] net: phy: generic polarity + LED support for qca808x
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH] [RFC] net: phy: broadcom: Add DT LED configuration support
  • From: Florian Fainelli <florian.fainelli@xxxxxxxxxxxx>
• [PATCH] [RFC] net: phy: broadcom: Add DT LED configuration support
  • From: Marek Vasut <marex@xxxxxxx>
• [PATCH v4 3/3] backlight: Add Kinetic KTD2801 backlight support
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH v4 1/3] leds: ktd2692: move ExpressWire code to library
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH v4 2/3] dt-bindings: backlight: add Kinetic KTD2801 binding
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH v4 0/3] Kinetic ExpressWire library and KTD2801 backlight driver
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: [PATCH v3 1/3] leds: ktd2692: move ExpressWire code to library
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: [PATCH v3 1/3] leds: ktd2692: move ExpressWire code to library
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v3 1/3] leds: ktd2692: move ExpressWire code to library
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: [PATCH v3 1/3] leds: ktd2692: move ExpressWire code to library
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: [PATCH v3 3/3] backlight: Add Kinetic KTD2801 backlight support
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v3 1/3] leds: ktd2692: move ExpressWire code to library
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v3 3/3] backlight: Add Kinetic KTD2801 backlight support
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: [PATCH v3 1/3] leds: ktd2692: move ExpressWire code to library
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: [PATCH v3 3/3] backlight: Add Kinetic KTD2801 backlight support
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v3 1/3] leds: ktd2692: move ExpressWire code to library
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v3 1/3] leds: ktd2692: move ExpressWire code to library
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: [PATCH v3 3/3] backlight: Add Kinetic KTD2801 backlight support
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v3 1/3] leds: ktd2692: move ExpressWire code to library
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• [PATCH v3 1/3] leds: ktd2692: move ExpressWire code to library
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH v3 3/3] backlight: Add Kinetic KTD2801 backlight support
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH v3 2/3] dt-bindings: backlight: add Kinetic KTD2801 binding
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH v3 0/3] Kinetic ExpressWire library and KTD2801 backlight driver
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH][next] leds: aw200xx: make read-only array coeff_table static const
  • From: Colin Ian King <colin.i.king@xxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Pavel Machek <pavel@xxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
• Re: [PATCH v2 2/2] backlight: Add Kinetic KTD2801 driver
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: [PATCH v2 2/2] backlight: Add Kinetic KTD2801 driver
  • From: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
• Re: [PATCH v2 2/2] backlight: Add Kinetic KTD2801 driver
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: [PATCH v2 2/2] backlight: Add Kinetic KTD2801 driver
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Jani Nikula <jani.nikula@xxxxxxxxxxxxxxx>
• Re: [PATCH v2 2/2] backlight: Add Kinetic KTD2801 driver
  • From: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
• Re: [PATCH v2 2/2] backlight: Add Kinetic KTD2801 driver
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: [PATCH v2 1/2] dt-bindings: backlight: add Kinetic KTD2801 binding
  • From: Linus Walleij <linus.walleij@xxxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Pavel Machek <pavel@xxxxxx>
• [PATCH v2 2/2] backlight: Add Kinetic KTD2801 driver
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH v2 1/2] dt-bindings: backlight: add Kinetic KTD2801 binding
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• [PATCH v2 0/2] Kinetic KTD2801 backlight driver
  • From: Duje Mihanović <duje.mihanovic@xxxxxxxx>
• Re: (subset) [PATCH v8 0/7] Add support for LUT PPG
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: trigger: panic: simplify led_trigger_set_panic
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: Userspace API for per key backlight for non HID (no hidraw) keyboards
  • From: Werner Sembach <wse@xxxxxxxxxxxxxxxxxxx>
• Re: [PATCH] dt-bindings: leds: add FUNCTION defines for per-band WLANs
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: Userspace API for per key backlight for non HID (no hidraw) keyboards
  • From: Armin Wolf <W_Armin@xxxxxx>
• Re: Userspace API for per key backlight for non HID (no hidraw) keyboards
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• Re: Implement per-key keyboard backlight as auxdisplay?
  • From: Hans de Goede <hdegoede@xxxxxxxxxx>
• [PATCH] dt-bindings: leds: add FUNCTION defines for per-band WLANs
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH] leds: trigger: panic: simplify led_trigger_set_panic
  • From: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
• Re: (subset) [PATCH v8 0/7] Add support for LUT PPG
  • From: Anjelique Melendez <quic_amelende@xxxxxxxxxxx>
• Re: [PATCH] leds: trigger: audio: Set module alias for module auto-loading
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH] leds: trigger: audio: Set module alias for module auto-loading
  • From: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
• [PATCH] leds/pca963x: implement power management
  • From: Amitesh Singh <singh.amitesh@xxxxxxxxx>
• [PATCH] leds/pca963x: implement power management
  • From: Amitesh Singh <singh.amitesh@xxxxxxxxx>
• [PATCH] leds: triggers: default-on: Add module alias for module auto-loading
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH] leds: trigger: audio: Set module alias for module auto-loading
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [PATCH v5] Add multicolor support to BlinkM LED driver
  • From: Joseph Strauss <jstrauss@xxxxxxxxxxx>
• [PATCH] leds: trigger: audio: Set module alias for module auto-loading
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• [lee-leds:for-leds-next-next] BUILD REGRESSION 1f88a09c35f8d50eff1adbc9e35cc2982b3ac9f9
  • From: kernel test robot <lkp@xxxxxxxxx>
• [lee-leds:for-leds-next-next 48/56] drivers/leds/rgb/leds-qcom-lpg.c:17:10: fatal error: linux/soc/qcom/qcom-pbs.h: No such file or directory
  • From: kernel test robot <lkp@xxxxxxxxx>
• Re: [net-next PATCH v9 2/5] dt-bindings: net: phy: Document LED inactive high impedance mode
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [net-next PATCH v9 1/5] dt-bindings: net: phy: Make LED active-low property common
  • From: Rob Herring <robh@xxxxxxxxxx>
• Re: [PATCH v1 1/2] leds: aw200xx: support for hw pattern controllers
  • From: Martin Kurbanov <mmkurbanov@xxxxxxxxxxxxxxxxx>
• Re: [PATCH v7 1/2] leds: trigger: netdev: display only supported link speed attribute
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH v7 2/2] docs: ABI: sysfs-class-led-trigger-netdev: Document now hidable link_*
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [PATCH v7 1/2] leds: trigger: netdev: display only supported link speed attribute
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: leds: trigger: oneshot: One function call less in pattern_init() after error detection
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: leds: trigger: oneshot: One function call less in pattern_init() after error detection
  • From: Markus Elfring <Markus.Elfring@xxxxxx>
• Re: [PATCH v6 2/2] docs: ABI: sysfs-class-led-trigger-netdev: Document now hidable link_*
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v6 1/2] leds: trigger: netdev: display only supported link speed attribute
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH RESUBMIT] leds: trigger: netdev: add core support for hw not supporting fallback to LED sw control
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [net-next PATCH v9 1/5] dt-bindings: net: phy: Make LED active-low property common
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [net-next PATCH v9 2/5] dt-bindings: net: phy: Document LED inactive high impedance mode
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v4] Add multicolor support to BlinkM LED driver
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: trigger: oneshot: One function call less in pattern_init() after error detection
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH] leds: class: If no default trigger is given, make hw_control trigger the default trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH RESUBMIT] leds: trigger: netdev: add core support for hw not supporting fallback to LED sw control
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH RESUBMIT] leds: trigger: netdev: add core support for hw not supporting fallback to LED sw control
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH 0/2] leds: trigger: load trigger modules on-demand if used as default trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v8 0/7] Add support for LUT PPG
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v8 4/7] leds: rgb: leds-qcom-lpg: Add support for PPG through single SDAM
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v8 0/7] Add support for LUT PPG
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: (subset) [PATCH v4] leds: trigger: netdev: skip setting baseline state in activate if hw-controlled
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: trigger: panic: simplify led_trigger_set_panic
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH RESUBMIT] leds: trigger: netdev: add core support for hw not supporting fallback to LED sw control
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v6 1/2] leds: trigger: netdev: display only supported link speed attribute
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH v6 1/2] leds: trigger: netdev: display only supported link speed attribute
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [PATCH dt-schema] schemas: chosen: Add OpenWrt LEDs properties for system states
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH dt-schema] schemas: chosen: Add OpenWrt LEDs properties for system states
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH dt-schema] schemas: chosen: Add OpenWrt LEDs properties for system states
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH dt-schema] schemas: chosen: Add OpenWrt LEDs properties for system states
  • From: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
• Re: [PATCH dt-schema] schemas: chosen: Add OpenWrt LEDs properties for system states
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH dt-schema] schemas: chosen: Add OpenWrt LEDs properties for system states
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [PATCH 2/2] leds: make flash and multicolor dependencies unconditional
  • From: Rui Miguel Silva <rmfrfs@xxxxxxxxx>
• Re: [net-next PATCH v9 0/5] net: phy: generic polarity + LED support for qca808x
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH 1/2] leds: remove led_init_default_state_get() and devm_led_classdev_register_ext() stubs
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH 1/2] leds: remove led_init_default_state_get() and devm_led_classdev_register_ext() stubs
  • From: Heiner Kallweit <hkallweit1@xxxxxxxxx>
• Re: [PATCH V2 REBASED] dt-bindings: leds: add "usbport" trigger
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• [PATCH 2/2] leds: make flash and multicolor dependencies unconditional
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• [PATCH 1/2] leds: remove led_init_default_state_get() and devm_led_classdev_register_ext() stubs
  • From: Arnd Bergmann <arnd@xxxxxxxxxx>
• Re: [PATCH] leds: Change devm_led_classdev_register_ext stub logic to use IS_REACHABLE
  • From: "Arnd Bergmann" <arnd@xxxxxxxx>
• Re: [PATCH dt-schema] schemas: chosen: Add OpenWrt LEDs properties for system states
  • From: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
• Re: [PATCH V2 REBASED] dt-bindings: leds: add "usbport" trigger
  • From: Lee Jones <lee@xxxxxxxxxx>
• Re: [PATCH] leds: Change devm_led_classdev_register_ext stub logic to use IS_REACHABLE
  • From: Lee Jones <lee@xxxxxxxxxx>
• [PATCH dt-schema] schemas: chosen: Add OpenWrt LEDs properties for system states
  • From: Rafał Miłecki <zajec5@xxxxxxxxx>
• Re: [net-next PATCH v9 0/5] net: phy: generic polarity + LED support for qca808x
  • From: Jakub Kicinski <kuba@xxxxxxxxxx>
• Re: [net-next PATCH v9 5/5] net: phy: at803x: add LED support for qca808x
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v9 3/5] net: phy: add support for PHY LEDs polarity modes
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v9 2/5] dt-bindings: net: phy: Document LED inactive high impedance mode
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v9 1/5] dt-bindings: net: phy: Make LED active-low property common
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [PATCH v4] Add multicolor support to BlinkM LED driver
  • From: kernel test robot <lkp@xxxxxxxxx>
• [PATCH v4] Add multicolor support to BlinkM LED driver
  • From: Joseph Strauss <jstrauss@xxxxxxxxxxx>
• [net-next PATCH v9 5/5] net: phy: at803x: add LED support for qca808x
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v9 4/5] dt-bindings: net: Document QCA808x PHYs
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v9 3/5] net: phy: add support for PHY LEDs polarity modes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v9 2/5] dt-bindings: net: phy: Document LED inactive high impedance mode
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v9 1/5] dt-bindings: net: phy: Make LED active-low property common
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v9 0/5] net: phy: generic polarity + LED support for qca808x
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v8 3/5] net: phy: add support for PHY LEDs polarity modes
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v8 3/5] net: phy: add support for PHY LEDs polarity modes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v8 3/5] net: phy: add support for PHY LEDs polarity modes
  • From: Andrew Lunn <andrew@xxxxxxx>
• Re: [net-next PATCH v8 5/5] net: phy: at803x: add LED support for qca808x
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• Re: [net-next PATCH v8 5/5] net: phy: at803x: add LED support for qca808x
  • From: Maxime Chevallier <maxime.chevallier@xxxxxxxxxxx>
• [net-next PATCH v8 5/5] net: phy: at803x: add LED support for qca808x
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v8 4/5] dt-bindings: net: Document QCA808x PHYs
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v8 3/5] net: phy: add support for PHY LEDs polarity modes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v8 2/5] dt-bindings: net: phy: Document LED inactive high impedance mode
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v8 1/5] dt-bindings: net: phy: Make LED active-low property common
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v8 0/5] net: phy: generic polarity + LED support for qca808x
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v7 5/5] net: phy: at803x: add LED support for qca808x
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v7 4/5] dt-bindings: net: Document QCA808x PHYs
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v7 3/5] net: phy: add support for PHY LEDs polarity modes
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>
• [net-next PATCH v7 2/5] dt-bindings: net: phy: Document LED inactive high impedance mode
  • From: Christian Marangi <ansuelsmth@xxxxxxxxx>