Add LED_FUNCTION_SPEED_LAN and LED_FUNCTION_SPEED_WAN for LEDs that indicate link speed of ethernet ports on LAN/WAN. This is useful to distinguish those LEDs from LEDs that indicate link status (up/down). example: Fortinet FortiGate 30E/50E have LEDs that indicate link speed on each of the ethernet ports in addition to LEDs that indicate link status (up/down). - 1000 Mbps: green:speed-(lan|wan)-N - 100 Mbps: amber:speed-(lan|wan)-N - 10 Mbps: (none, turned off) Signed-off-by: INAGAKI Hiroshi <musashino.open@xxxxxxxxx> --- include/dt-bindings/leds/common.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/include/dt-bindings/leds/common.h b/include/dt-bindings/leds/common.h index d4b8498bde7f..8d446cf88b4c 100644 --- a/include/dt-bindings/leds/common.h +++ b/include/dt-bindings/leds/common.h @@ -96,6 +96,8 @@ #define LED_FUNCTION_PROGRAMMING "programming" #define LED_FUNCTION_RX "rx" #define LED_FUNCTION_SD "sd" +#define LED_FUNCTION_SPEED_LAN "speed-lan" +#define LED_FUNCTION_SPEED_WAN "speed-wan" #define LED_FUNCTION_STANDBY "standby" #define LED_FUNCTION_TORCH "torch" #define LED_FUNCTION_TX "tx" -- 2.25.1
