[PATCH v2 3/3] leds: rgb: leds-ktd202x: Skip regulator settings for Xiaomi pad2

[Kate Hsuan <hpa@xxxxxxxxxx>]

The controller is already powered by BP25890RTWR on Xiaomi Pad2 so the
regulator settings can be ignored.

Signed-off-by: Kate Hsuan <hpa@xxxxxxxxxx>
---
 drivers/leds/rgb/leds-ktd202x.c | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/drivers/leds/rgb/leds-ktd202x.c b/drivers/leds/rgb/leds-ktd202x.c
index 8eb79c342fb6..6fd0794988e9 100644
--- a/drivers/leds/rgb/leds-ktd202x.c
+++ b/drivers/leds/rgb/leds-ktd202x.c
@@ -14,7 +14,9 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/regmap.h>
+#ifndef CONFIG_ACPI
 #include <linux/regulator/consumer.h>
+#endif
 
 #define KTD2026_NUM_LEDS 3
 #define KTD2027_NUM_LEDS 4
@@ -105,18 +107,22 @@ struct ktd202x {
 
 static int ktd202x_chip_disable(struct ktd202x *chip)
 {
+#ifndef CONFIG_ACPI
 	int ret;
+#endif
 
 	if (!chip->enabled)
 		return 0;
 
 	regmap_write(chip->regmap, KTD202X_REG_RESET_CONTROL, KTD202X_ENABLE_CTRL_SLEEP);
 
+#ifndef CONFIG_ACPI
 	ret = regulator_bulk_disable(ARRAY_SIZE(chip->regulators), chip->regulators);
 	if (ret) {
 		dev_err(chip->dev, "Failed to disable regulators: %d\n", ret);
 		return ret;
 	}
+#endif
 
 	chip->enabled = false;
 	return 0;
@@ -129,11 +135,13 @@ static int ktd202x_chip_enable(struct ktd202x *chip)
 	if (chip->enabled)
 		return 0;
 
+#ifndef CONFIG_ACPI
 	ret = regulator_bulk_enable(ARRAY_SIZE(chip->regulators), chip->regulators);
 	if (ret) {
 		dev_err(chip->dev, "Failed to enable regulators: %d\n", ret);
 		return ret;
 	}
+#endif
 	chip->enabled = true;
 
 	ret = regmap_write(chip->regmap, KTD202X_REG_RESET_CONTROL, KTD202X_ENABLE_CTRL_WAKE);
@@ -560,6 +568,7 @@ static int ktd202x_probe(struct i2c_client *client)
 		return ret;
 	}
 
+#ifndef CONFIG_ACPI
 	chip->regulators[0].supply = "vin";
 	chip->regulators[1].supply = "vio";
 	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(chip->regulators), chip->regulators);
@@ -573,10 +582,12 @@ static int ktd202x_probe(struct i2c_client *client)
 		dev_err_probe(dev, ret, "Failed to enable regulators.\n");
 		return ret;
 	}
+#endif
 
 	chip->num_leds = (int) (unsigned long)i2c_get_match_data(client);
 
 	ret = ktd202x_probe_dt(chip);
+#ifndef CONFIG_ACPI
 	if (ret < 0) {
 		regulator_bulk_disable(ARRAY_SIZE(chip->regulators), chip->regulators);
 		return ret;
@@ -587,6 +598,10 @@ static int ktd202x_probe(struct i2c_client *client)
 		dev_err_probe(dev, ret, "Failed to disable regulators.\n");
 		return ret;
 	}
+#else
+	if (ret < 0)
+		return ret;
+#endif
 
 	mutex_init(&chip->mutex);
 
-- 
2.43.1