On Wed, 01 Nov 2023 17:24:45 +0300, Dmitry Rokosov wrote:
> AW200XX controllers have the capability to declare more than 0xf LEDs,
> therefore, it is necessary to accept LED names using an appropriate
> regex pattern.
>
> The register offsets can be adjusted within the specified range, with
> the maximum value corresponding to the highest number of LEDs that can
> be connected to the controller.
>
> Fixes: e338a05e76ca ("dt-bindings: leds: Add binding for AW200xx")
> Signed-off-by: Dmitry Rokosov <ddrokosov@xxxxxxxxxxxxxxxxx>
> ---
> .../bindings/leds/awinic,aw200xx.yaml | 64 +++++++++++++++++--
> 1 file changed, 58 insertions(+), 6 deletions(-)
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/leds/awinic,aw200xx.example.dtb: led-controller@3a: led@0: Unevaluated properties are not allowed ('reg' was unexpected)
from schema $id: http://devicetree.org/schemas/leds/awinic,aw200xx.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/leds/awinic,aw200xx.example.dtb: led-controller@3a: led@1: Unevaluated properties are not allowed ('reg' was unexpected)
from schema $id: http://devicetree.org/schemas/leds/awinic,aw200xx.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/leds/awinic,aw200xx.example.dtb: led-controller@3a: led@2: Unevaluated properties are not allowed ('reg' was unexpected)
from schema $id: http://devicetree.org/schemas/leds/awinic,aw200xx.yaml#
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20231101142445.8753-12-ddrokosov@xxxxxxxxxxxxxxxxx
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
