The LED ACT which is included from bcm2711-rpi-4-b doesn't exists
on the Raspberry Pi 400. So the bcm2711-rpi-400.dts tries to
use the delete-node directive in order to remove the complete
node. Unfortunately the usage get broken in commit 1156e3a78bcc
("ARM: dts: bcm283x: Move ACT LED into separate dtsi")
and now ACT and PWR LED using the same GPIO and this prevent
probing of led-gpios on Raspberry Pi 400:
leds-gpio: probe of leds failed with error -16
So fix the delete-node directive.
Fixes: 1156e3a78bcc ("ARM: dts: bcm283x: Move ACT LED into separate dtsi")
Signed-off-by: Stefan Wahren <wahrenst@xxxxxxx>
---
arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
index 1ab8184302db..5a2869a18bd5 100644
--- a/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
+++ b/arch/arm/boot/dts/broadcom/bcm2711-rpi-400.dts
@@ -36,9 +36,7 @@ &led_pwr {
gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
};
-&leds {
- /delete-node/ led_act;
-};
+/delete-node/ &led_act;
&pm {
/delete-property/ system-power-controller;
--
2.34.1
