Hey Lee,
Is there anything specific you'd suggest changing in the current
patchset, or are we good to proceed?
Thanks,
Naresh Solanki
On Mon, 30 Oct 2023 at 14:22, Naresh Solanki
<naresh.solanki@xxxxxxxxxxxxx> wrote:
>
> Hi,
>
> On Thu, 21 Sept 2023 at 16:02, Lee Jones <lee@xxxxxxxxxx> wrote:
> >
> > On Thu, 21 Sep 2023, Naresh Solanki wrote:
> >
> > > Hi
> > >
> > >
> > > On Wed, 20 Sept 2023 at 18:35, Lee Jones <lee@xxxxxxxxxx> wrote:
> > > >
> > > > On Thu, 14 Sep 2023, Naresh Solanki wrote:
> > > >
> > > > > From: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
> > > > >
> > > > > The MAX5970 is hot swap controller and has 4 indication LED.
> > > > >
> > > > > Signed-off-by: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
> > > > > Signed-off-by: Naresh Solanki <Naresh.Solanki@xxxxxxxxxxxxx>
> > > > > ---
> > > > > Changes in V3:
> > > > > - Drop array for ddata variable.
> > > > > Changes in V2:
> > > > > - Add of_node_put before return.
> > > > > - Code cleanup
> > > > > - Refactor code & remove max5970_setup_led function.
> > > > > ---
> > > > > drivers/leds/Kconfig | 11 ++++
> > > > > drivers/leds/Makefile | 1 +
> > > > > drivers/leds/leds-max5970.c | 110 ++++++++++++++++++++++++++++++++++++
> > > > > 3 files changed, 122 insertions(+)
> > > > > create mode 100644 drivers/leds/leds-max5970.c
> > > >
> > > > Couple of nits and you're good to go.
> > > >
> > > > Once fixed please resubmit with my:
> > > >
> > > > Reviewed-by: Lee Jones <lee@xxxxxxxxxx>
> > > >
> > > > > diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> > > > > index b92208eccdea..03ef527cc545 100644
> > > > > --- a/drivers/leds/Kconfig
> > > > > +++ b/drivers/leds/Kconfig
> > > > > @@ -637,6 +637,17 @@ config LEDS_ADP5520
> > > > > To compile this driver as a module, choose M here: the module will
> > > > > be called leds-adp5520.
> > > > >
> > > > > +config LEDS_MAX5970
> > > > > + tristate "LED Support for Maxim 5970"
> > > > > + depends on LEDS_CLASS
> > > > > + depends on MFD_MAX5970
> > > > > + help
> > > > > + This option enables support for the Maxim MAX5970 & MAX5978 smart
> > > > > + switch indication LEDs via the I2C bus.
> > > > > +
> > > > > + To compile this driver as a module, choose M here: the module will
> > > > > + be called leds-max5970.
> > > > > +
> > > > > config LEDS_MC13783
> > > > > tristate "LED Support for MC13XXX PMIC"
> > > > > depends on LEDS_CLASS
> > > > > diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> > > > > index d7348e8bc019..6eaee0a753c6 100644
> > > > > --- a/drivers/leds/Makefile
> > > > > +++ b/drivers/leds/Makefile
> > > > > @@ -56,6 +56,7 @@ obj-$(CONFIG_LEDS_LP8501) += leds-lp8501.o
> > > > > obj-$(CONFIG_LEDS_LP8788) += leds-lp8788.o
> > > > > obj-$(CONFIG_LEDS_LP8860) += leds-lp8860.o
> > > > > obj-$(CONFIG_LEDS_LT3593) += leds-lt3593.o
> > > > > +obj-$(CONFIG_LEDS_MAX5970) += leds-max5970.o
> > > > > obj-$(CONFIG_LEDS_MAX77650) += leds-max77650.o
> > > > > obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o
> > > > > obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
> > > > > diff --git a/drivers/leds/leds-max5970.c b/drivers/leds/leds-max5970.c
> > > > > new file mode 100644
> > > > > index 000000000000..c9685990e26e
> > > > > --- /dev/null
> > > > > +++ b/drivers/leds/leds-max5970.c
> > > > > @@ -0,0 +1,110 @@
> > > > > +// SPDX-License-Identifier: GPL-2.0
> > > > > +/*
> > > > > + * Device driver for leds in MAX5970 and MAX5978 IC
> > > > > + *
> > > > > + * Copyright (c) 2022 9elements GmbH
> > > > > + *
> > > > > + * Author: Patrick Rudolph <patrick.rudolph@xxxxxxxxxxxxx>
> > > > > + */
> > > > > +
> > > > > +#include <linux/leds.h>
> > > > > +#include <linux/mfd/max5970.h>
> > > > > +#include <linux/of.h>
> > > > > +#include <linux/platform_device.h>
> > > > > +#include <linux/regmap.h>
> > > > > +
> > > > > +#define ldev_to_maxled(c) container_of(c, struct max5970_led, cdev)
> > > > > +
> > > > > +struct max5970_led {
> > > > > + struct device *dev;
> > > > > + struct regmap *regmap;
> > > > > + struct led_classdev cdev;
> > > > > + unsigned int index;
> > > > > +};
> > > > > +
> > > > > +static int max5970_led_set_brightness(struct led_classdev *cdev,
> > > > > + enum led_brightness brightness)
> > > > > +{
> > > > > + struct max5970_led *ddata = ldev_to_maxled(cdev);
> > > > > + int ret, val;
> > > > > +
> > > > > + /* Set/clear corresponding bit for given led index */
> > > > > + val = !brightness ? BIT(ddata->index) : 0;
> > > > > +
> > > > > + ret = regmap_update_bits(ddata->regmap, MAX5970_REG_LED_FLASH, BIT(ddata->index), val);
> > > > > + if (ret < 0)
> > > > > + dev_err(cdev->dev, "failed to set brightness %d", ret);
> > > > > +
> > > > > + return ret;
> > > > > +}
> > > > > +
> > > > > +static int max5970_led_probe(struct platform_device *pdev)
> > > > > +{
> > > > > + struct device *dev = &pdev->dev;
> > > > > + struct device_node *np = dev_of_node(dev->parent);
> > > > > + struct regmap *regmap;
> > > > > + struct device_node *led_node;
> > > > > + struct device_node *child;
> > > >
> > > > Nit: You can place these on the same line.
> > > Ack
> > > >
> > > > > + struct max5970_led *ddata;
> > > > > + int ret = -ENODEV, num_leds = 0;
> > > > > +
> > > > > + regmap = dev_get_regmap(pdev->dev.parent, NULL);
> > > > > + if (!regmap)
> > > > > + return -EPROBE_DEFER;
> > > >
> > > > Why are you deferring here?
> > > This is a Leaf driver. Making sure the parent driver has initialized regmap.
> >
> > How can this driver initialise before the parent driver?
> The parent driver in this case is simple_i2c_mfd.
> Based on reference from other similar implementations, the regmap
> check was adapted.
> As you mentioned, your right that leaf driver will not start before parent
> driver is loaded successfully so probably the DEFER might not be needed
> here.
>
> Thanks,
> Naresh
> >
> > --
> > Lee Jones [李琼斯]
