Linux IIO (Industrial I/O) Development
[Prev Page][Next Page]
- Re: [PATCH 2/3] iio: adc: ina3221: Add support for IIO ADC driver for TI INA3221, (continued)
- [PATCH v2 2/7] iio: adc: ad7791: claim direct mode when writing frequency,
Alison Schofield
- [PATCH 1/2] staging: iio: accel: fix error check,
Luis de Bethencourt
- [PATCH] staging: iio: accel: remove impossible condition,
Luis de Bethencourt
- [PATCH 0/8] TI AM335x TSC/ADC cleanup,
Andrew F. Davis
- [PATCH] iio: (ms5637) Add Measurement Specialties explicit MS5805 and MS5837 support,
Markezana, William
- [RFC 0/4] Intel Integrated Sensor Hub Support (ISH),
Srinivas Pandruvada
- [PATCH v2] iio: Add driver for Silabs si1132, si1141/2/3 and si1145/6/7 ambient light, uv index and proximity sensors,
Crestez Dan Leonard
- [PATCH v4 0/3] iio: generic_buffer: Select device/trigger by number,
Crestez Dan Leonard
- [PATCH] iio: as3935: improve error reporting in as3935_event_work,
Arnd Bergmann
- [PATCH] staging: iio: fix ad7606_spi regression,
Arnd Bergmann
- [PATCH] iio: hudmidity: hdc100x: fix incorrect shifting and scaling,
Matt Ranostay
- [PATCH v3] iio: temperature: add support for Maxim thermocouple chips,
Matt Ranostay
- [PATCH v2] iio: temperature: add support for Maxim thermocouple chips,
Matt Ranostay
- [PATCH 1/1] iio: light: Added CM36672 Proximity Sensor Driver.,
Kevin Tsai
- [PATCH v5 0/4] Allow ISA-style drivers on modern systems,
William Breathitt Gray
- Re: [PATCH v4 4/4] watchdog: ebc-c384_wdt: Allow build for X86_64, Guenter Roeck
- [PATCH] iio: adc: ti-adc081c: add ACPI device ID matching,
Dan O'Donovan
- [PATCH] iio: humidity: hdc100x: fix IIO_TEMP channel reporting,
Matt Ranostay
- [PATCH] iio: temperature: add support for Maxim thermocouple chips,
Matt Ranostay
- [PATCH] iio: imu: inv_mpu6050: Support software triggers,
Doru Gucea
- Re: acpi-als on Dell XPS 13 9343, Pali Rohár
- [PATCH] tools: iio: Add ability to install/uninstall,
Peter Robinson
- [PATCH 1/2] iio: bh1780: dereference the client properly,
Linus Walleij
- [PATCH v3 0/3] atlas-ph-sensor: add conductivity sensor support,
Matt Ranostay
- [PATCH 0/7] iio: adc: clean up claims on direct mode in ad7* drivers,
Alison Schofield
- [RFC PATCH v2] tools: iio: Rename generic_buffer to iio_generic_buffer,
Daniel Baluta
- [RFC PATCH] tools:iio: Rename generic_buffer, Daniel Baluta
- [PATCH] iio: magnetometer: bmc150: Document Bosch supported chips,
Daniel Baluta
- [PATCH] iio: proximity: as3935: remove redundant MODULE_ALIAS,
Matt Ranostay
- [PATCH v4 0/4] Allow ISA-style drivers on modern systems,
William Breathitt Gray
- [PATCH v3 0/4] Allow ISA-style drivers on modern systems,
William Breathitt Gray
- [PATCH v2 0/4] Allow ISA-style drivers on modern systems,
William Breathitt Gray
- [RFC 0/7] Deal with iio trigger names,
Crestez Dan Leonard
- [PATCH v2 1/2] iio: generic_buffer: Cleanup when receiving signals,
Crestez Dan Leonard
- [PATCH 0/4] Allow ISA-style drivers on modern systems,
William Breathitt Gray
- Possible deadlock in mpu6050 on buffer disable?,
Crestez Dan Leonard
- Re: [RFC PATCH V2] iio:trigger: Experimental kthread tight loop trigger (thread only),
Jonathan Cameron
- [RFC] iio: accel: st_accel: Add lis3l02dq support,
Jonathan Cameron
- Note of a bug in st-sensors driver., Jonathan Cameron
- [PATCH] iio: Documentation: fix in_*_scale kernel version,
Alexandre Belloni
- [PATCH 45/54] MAINTAINERS: Add file patterns for staging iio device tree bindings,
Geert Uytterhoeven
- [PATCH 20/54] MAINTAINERS: Add file patterns for iio device tree bindings,
Geert Uytterhoeven
- Re: [PATCH] Staging: iio: Fix sparse endian warning, Geert Uytterhoeven
- [PATCH 0/3] iio: proximity: as3935: fix major drivers,
Matt Ranostay
- [PATCH 1/2 v7] iio: st_sensors: switch to a threaded interrupt,
Linus Walleij
- [PATCH] iio: humidity: hdc100x: correct humidity integration time mask,
Alison Schofield
- [PATCH] iio: humidity: hdc100x: add HDC1000 and HDC1008 product names,
Alison Schofield
- [PATCH 1/2] iio: generic_buffer: Cleanup when receiving signals,
Crestez Dan Leonard
- [PATCH] max44000: Remove scale from proximity,
Crestez Dan Leonard
- [PATCH v2 0/3] atlas-ph-sensor: add conductivity sensor support,
Matt Ranostay
- Drivers for Bitland Dual Accelerometer,
Lasse Schuirmann
- [RFC] iio: add driver for si114x ambient light / proximity sensors,
Crestez Dan Leonard
- [PATCH v5] iio: max5487: Add support for Maxim digital potentiometers,
Cristina Moraru
- [RFC] dynamic iio consumer channel mapping,
Matt Ranostay
- [PATCH] iio: adc: nau7802: Expose possible gains in sysfs,
Quentin Schulz
- [PATCH v2 0/7] iio: inv_mpu6050: Support i2c master and external readings,
Crestez Dan Leonard
- [PATCH v4] iio: max5487: Add support for Maxim digital potentiometers, Cristina Moraru
- [PATCH] iio: adc: ti-ads1015: add datasheet names,
Matt Ranostay
- [PATCH] iio: Export I2C module alias information,
Javier Martinez Canillas
- [PATCH v3] iio: max5487: Add support for Maxim digital potentiometers,
Cristina Moraru
- [patch] iio: humidity: Remove a stray unlock,
Dan Carpenter
- Scale and FS range information (was: Re: [PATCH v3] iio: adc: ti-ads1015: add support for ADS1115 part),
Lucas De Marchi
- [PATCH v5 2/2] iio: accel: Add triggered buffer support for BMA220,
Tiberiu Breana
- [PATCH v3] iio: adc: ti-ads1015: add support for ADS1115 part,
Matt Ranostay
- [PATCH] iio: light: jsa1212: remove unneeded i2c check functionality test,
Alison Schofield
- [PATCH] iio: triggers: Make trigger ops structure explicitly non optional.,
Jonathan Cameron
- [PATCH 1/3] iio: st_sensors: Init trigger before irq request,
Crestez Dan Leonard
- [PATCH] iio: potentiometer: tpl0102: remove unneeded i2c check functionality test,
Matt Ranostay
- Re: [PATCH 06/10] watchdog: ebc-c384_wdt: Utilize the ISA bus driver,
Sasha Levin
- [patch V4 26/31] iio: use parity32 in adxrs450, zengzhaoxiu
- [PATCH v2] iio: adc: ti-ads1015: add support for ADS1115 part,
Matt Ranostay
- [PATCH 1/2 v6] iio: st_sensors: switch to a threaded interrupt,
Linus Walleij
- re: staging:iio:triggers introduce iio_trigger_ops to take const bits out of iio_trig_structure.,
Dan Carpenter
- [PATCH] iio: adc: ti-ads1015: add support for ADS1115 part,
Matt Ranostay
- [PATCH 1/2] iio: st_sensors: switch to a threaded interrupt,
Linus Walleij
- Re: [PATCH v5 2/2] iio: ad5755: Add DT binding documentation,
Sean Nyekjær
- [PATCH 1/2 v4] iio: st_sensors: switch to a threaded interrupt,
Linus Walleij
- [PATCH] iio: st_sensors: read surplus samples in trigger, Linus Walleij
- [PATCH v3] iio: st_sensors: switch to a threaded interrupt,
Linus Walleij
- [PATCH v2] iio: st_sensors: switch to a threaded interrupt,
Linus Walleij
- [PATCH] iio: st_sensors: switch to a threaded interrupt, Linus Walleij
- [PULL] IIO fixes for 4.6d (inv mpu6050 acpi regression),
Jonathan Cameron
- [PATCH v4 0/2] Add support for the Bosch BMA220 accelerometer,
Tiberiu Breana
- IIO trigger names are not actually unique,
Crestez Dan Leonard
- [PATCH] iio: light apds9960: Add the missing dev.parent,
Yong Li
- [PATCH v2] iio: pressure: bmp280: add humidity support,
Matt Ranostay
- [PATCH v9 0/9] i2c mux cleanup and locking update,
Peter Rosin
- [PATCH v9 8/9] [media] rtl2832_sdr: get rid of empty regmap wrappers, Peter Rosin
- [PATCH v9 9/9] [media] rtl2832: regmap is aware of lockdep, drop local locking hack, Peter Rosin
- [PATCH v9 7/9] [media] rtl2832: change the i2c gate to be mux-locked, Peter Rosin
- [PATCH v9 6/9] [media] si2168: change the i2c gate to be mux-locked, Peter Rosin
- [PATCH v9 4/9] i2c-mux: document i2c muxes and elaborate on parent-/mux-locked muxes, Peter Rosin
- [PATCH v9 5/9] iio: imu: inv_mpu6050: change the i2c gate to be mux-locked, Peter Rosin
- [PATCH v9 2/9] i2c: muxes always lock the parent adapter, Peter Rosin
- [PATCH v9 3/9] i2c-mux: relax locking of the top i2c adapter during mux-locked muxing, Peter Rosin
- [PATCH v9 1/9] i2c: allow adapter drivers to override the adapter locking, Peter Rosin
- Re: [PATCH v9 0/9] i2c mux cleanup and locking update, Wolfram Sang
- [RFC] Make the devm_iio_device_alloc call set iio_dev.dev.parent.,
Jonathan Cameron
- trigger->ops structure optional?,
Gwendal Grignou
- [RFC] iio: Add support for describing scan offsets in buffer ops,
Crestez Dan Leonard
- [PATCHv2] iio: Fix error handling in iio_trigger_attach_poll_func,
Crestez Dan Leonard
- [PATCH v4] iio: accel: Add support for Freescale MMA7660FC,
Constantin Musca
- [PATCH v2 00/10] Use the ISA bus driver for PC/104 and ISA devices,
William Breathitt Gray
- [PATCH v2 01/10] isa: Implement the module_isa_driver macro, William Breathitt Gray
- [PATCH v2 02/10] isa: Implement the max_num_isa_dev macro, William Breathitt Gray
- [PATCH v2 03/10] Documentation: Add ISA bus driver documentation, William Breathitt Gray
- [PATCH v2 04/10] iio: stx104: Add X86 dependency to STX104 Kconfig option, William Breathitt Gray
- [PATCH v2 05/10] iio: stx104: Utilize the module_isa_driver and max_num_isa_dev macros, William Breathitt Gray
- [PATCH v2 06/10] watchdog: ebc-c384_wdt: Utilize the ISA bus driver, William Breathitt Gray
- [PATCH v2 07/10] gpio: 104-dio-48e: Utilize the ISA bus driver, William Breathitt Gray
- [PATCH v2 08/10] gpio: 104-idi-48: Utilize the ISA bus driver, William Breathitt Gray
- [PATCH v2 09/10] gpio: 104-idio-16: Utilize the ISA bus driver, William Breathitt Gray
- [PATCH v2 10/10] gpio: ws16c48: Utilize the ISA bus driver, William Breathitt Gray
- Re: [PATCH 03/10] Documentation: Add ISA bus driver documentation, Greg KH
- [PATCH 00/13] Rework for AFE440x drivers to prepare for AFE4405,
Andrew F. Davis
- [PATCH 05/13] iio: health/afe440x: Fix scan_index assignment, Andrew F. Davis
- [PATCH 07/13] iio: health/afe4404: Remove LED3 input channel, Andrew F. Davis
- [PATCH 10/13] iio: health/afe440x: Make gain settings a modifier for the stages, Andrew F. Davis
- [PATCH 09/13] iio: health/afe440x: Use regmap fields, Andrew F. Davis
- [PATCH 01/13] iio: health/afe440x: Fix kernel-doc format, Andrew F. Davis
- [PATCH 06/13] iio: health/afe440x: Remove unneeded offset handling, Andrew F. Davis
- [PATCH 11/13] iio: health/afe440x: Match LED currents to stages, Andrew F. Davis
- [PATCH 03/13] iio: health/afe440x: Remove unneeded initializers, Andrew F. Davis
- [PATCH 13/13] iio: health/afe4404: ENSEPGAIN is part of CONTROL2 register, Andrew F. Davis
- [PATCH 02/13] iio: health/afe440x: Remove of_match_ptr and ifdefs, Andrew F. Davis
- [PATCH 04/13] iio: health/afe440x: Always use separate gain values, Andrew F. Davis
- [PATCH 12/13] iio: health/afe440x: Remove unused definitions, Andrew F. Davis
- [PATCH 08/13] iio: health/afe440x: Remove channel names, Andrew F. Davis
- Re: [PATCH 00/13] Rework for AFE440x drivers to prepare for AFE4405, Jonathan Cameron
- [PATCH] iio: ak8975: Support adapters limited to BYTE_DATA, Crestez Dan Leonard
- [RFC 0/7] iio: inv_mpu6050: Support i2c master and external readings,
Crestez Dan Leonard
- [PATCH v3 0/2] Add support for the Bosch BMA220 accelerometer,
Tiberiu Breana
- [PATCH v2 0/2] Add support for the Bosch BMA220 accelerometer,
Tiberiu Breana
- [PATCH v3] iio: accel: Add support for Freescale MMA7660FC,
Constantin Musca
- [PATCH 0/3] mxs-lradc: Split driver into MFD,
Ksenija Stanojevic
- [PATCH 0/3] Add available sampling frequency and scale attributes,
Daniel Baluta
- [PATCH 0/2] Add support for the Bosch BMA220 accelerometer,
Tiberiu Breana
- [patch] iio: dac: ad5592r: Off by one bug in ad5592r_alloc_channels(),
Dan Carpenter
- [PATCH v2] iio: accel: Add support for Freescale MMA7660FC,
Constantin Musca
- [RFC] iio: Release irq if set_trigger_state fails,
Crestez Dan Leonard
[Index of Archives]
[Linux USB Devel]
[Video for Linux]
[Big List of Linux Books]
[Linux SCSI]
[Yosemite Forum]
