TI ADS1115 is a 16-bit resolution ADC that is register map
compatible with the ADS1015 device.
Cc: daniel.baluta@xxxxxxxxx
Signed-off-by: Matt Ranostay <matt.ranostay@xxxxxxxxx>
---
drivers/iio/adc/ti-ads1015.c | 77 ++++++++++++++++++++++++++++++++++++++++----
1 file changed, 71 insertions(+), 6 deletions(-)
diff --git a/drivers/iio/adc/ti-ads1015.c b/drivers/iio/adc/ti-ads1015.c
index 73cbf0b54e54..317325692cb3 100644
--- a/drivers/iio/adc/ti-ads1015.c
+++ b/drivers/iio/adc/ti-ads1015.c
@@ -55,6 +55,11 @@
#define ADS1015_DEFAULT_DATA_RATE 4
#define ADS1015_DEFAULT_CHAN 0
+enum {
+ ADS1015,
+ ADS1115,
+};
+
enum ads1015_channels {
ADS1015_AIN0_AIN1 = 0,
ADS1015_AIN0_AIN3,
@@ -123,6 +128,42 @@ static const struct {
}, \
}
+#define ADS1115_V_CHAN(_chan, _addr) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .address = _addr, \
+ .channel = _chan, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .scan_index = _addr, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_CPU, \
+ }, \
+}
+
+#define ADS1115_V_DIFF_CHAN(_chan, _chan2, _addr) { \
+ .type = IIO_VOLTAGE, \
+ .differential = 1, \
+ .indexed = 1, \
+ .address = _addr, \
+ .channel = _chan, \
+ .channel2 = _chan2, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .scan_index = _addr, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_CPU, \
+ }, \
+}
+
struct ads1015_data {
struct regmap *regmap;
/*
@@ -157,6 +198,19 @@ static const struct iio_chan_spec ads1015_channels[] = {
IIO_CHAN_SOFT_TIMESTAMP(ADS1015_TIMESTAMP),
};
+static const struct iio_chan_spec ads1115_channels[] = {
+ ADS1115_V_DIFF_CHAN(0, 1, ADS1015_AIN0_AIN1),
+ ADS1115_V_DIFF_CHAN(0, 3, ADS1015_AIN0_AIN3),
+ ADS1115_V_DIFF_CHAN(1, 3, ADS1015_AIN1_AIN3),
+ ADS1115_V_DIFF_CHAN(2, 3, ADS1015_AIN2_AIN3),
+ ADS1115_V_CHAN(0, ADS1015_AIN0),
+ ADS1115_V_CHAN(1, ADS1015_AIN1),
+ ADS1115_V_CHAN(2, ADS1015_AIN2),
+ ADS1115_V_CHAN(3, ADS1015_AIN3),
+ IIO_CHAN_SOFT_TIMESTAMP(ADS1015_TIMESTAMP),
+};
+
+
static int ads1015_set_power_state(struct ads1015_data *data, bool on)
{
int ret;
@@ -291,7 +345,9 @@ static int ads1015_read_raw(struct iio_dev *indio_dev,
mutex_lock(&indio_dev->mlock);
mutex_lock(&data->lock);
switch (mask) {
- case IIO_CHAN_INFO_RAW:
+ case IIO_CHAN_INFO_RAW: {
+ int shift = chan->scan_type.shift;
+
if (iio_buffer_enabled(indio_dev)) {
ret = -EBUSY;
break;
@@ -307,8 +363,7 @@ static int ads1015_read_raw(struct iio_dev *indio_dev,
break;
}
- /* 12 bit res, D0 is bit 4 in conversion register */
- *val = sign_extend32(*val >> 4, 11);
+ *val = sign_extend32(*val >> shift, 15 - shift);
ret = ads1015_set_power_state(data, false);
if (ret < 0)
@@ -316,6 +371,7 @@ static int ads1015_read_raw(struct iio_dev *indio_dev,
ret = IIO_VAL_INT;
break;
+ }
case IIO_CHAN_INFO_SCALE:
idx = data->channel_data[chan->address].pga;
*val = ads1015_scale[idx].scale;
@@ -502,8 +558,16 @@ static int ads1015_probe(struct i2c_client *client,
indio_dev->dev.parent = &client->dev;
indio_dev->info = &ads1015_info;
indio_dev->name = ADS1015_DRV_NAME;
- indio_dev->channels = ads1015_channels;
- indio_dev->num_channels = ARRAY_SIZE(ads1015_channels);
+
+ switch (id->driver_data) {
+ case ADS1015:
+ indio_dev->channels = ads1015_channels;
+ break;
+ case ADS1115:
+ indio_dev->channels = ads1115_channels;
+ break;
+ }
+ indio_dev->num_channels = 9;
indio_dev->modes = INDIO_DIRECT_MODE;
/* we need to keep this ABI the same as used by hwmon ADS1015 driver */
@@ -590,7 +654,8 @@ static const struct dev_pm_ops ads1015_pm_ops = {
};
static const struct i2c_device_id ads1015_id[] = {
- {"ads1015", 0},
+ {"ads1015", ADS1015},
+ {"ads1115", ADS1115},
{}
};
MODULE_DEVICE_TABLE(i2c, ads1015_id);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
