On 29/04/16 12:49, Ksenija Stanojevic wrote:
> Add mxs-lradc touchscreen driver.
>
> Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@xxxxxxxxx>
The only real thing this raises for me is why we are grabbing IRQs that I
don't think this driver even cares about...
Jonathan
> ---
> drivers/input/touchscreen/Kconfig | 14 +-
> drivers/input/touchscreen/Makefile | 1 +
> drivers/input/touchscreen/mxs-lradc-ts.c | 729 +++++++++++++++++++++++++++++++
> 3 files changed, 742 insertions(+), 2 deletions(-)
> create mode 100644 drivers/input/touchscreen/mxs-lradc-ts.c
>
> diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
> index 8ecdc38..d614d248 100644
> --- a/drivers/input/touchscreen/Kconfig
> +++ b/drivers/input/touchscreen/Kconfig
> @@ -566,7 +566,7 @@ config TOUCHSCREEN_HP600
> depends on SH_HP6XX && SH_ADC
> help
> Say Y here if you have a HP Jornada 620/660/680/690 and want to
> - support the built-in touchscreen.
> + support the built-in touchscreen.
>
> To compile this driver as a module, choose M here: the
> module will be called hp680_ts_input.
> @@ -685,7 +685,7 @@ config TOUCHSCREEN_UCB1400
> This enables support for the Philips UCB1400 touchscreen interface.
> The UCB1400 is an AC97 audio codec. The touchscreen interface
> will be initialized only after the ALSA subsystem has been
> - brought up and the UCB1400 detected. You therefore have to
> + brought up and the UCB1400 detected. You therefore have to
> configure ALSA support as well (either built-in or modular,
> independently of whether this driver is itself built-in or
> modular) for this driver to work.
> @@ -842,6 +842,16 @@ config TOUCHSCREEN_MX25
> To compile this driver as a module, choose M here: the
> module will be called fsl-imx25-tcq.
>
> +config TOUCHSCREEN_MXS_LRADC
> + tristate "Freescale i.MX23/i.MX28 LRADC touchscreen"
> + depends on MFD_MXS_LRADC
> + help
> + Say Y here if you have a touchscreen connected to the low-resolution
> + analog-to-digital converter (LRADC) on an i.MX23 or i.MX28 processor.
> +
> + To compile this driver as a module, choose M here: the module will be
> + called mxs-lradc-ts.
> +
> config TOUCHSCREEN_MC13783
> tristate "Freescale MC13783 touchscreen input driver"
> depends on MFD_MC13XXX
> diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
> index f42975e..513a6ff 100644
> --- a/drivers/input/touchscreen/Makefile
> +++ b/drivers/input/touchscreen/Makefile
> @@ -54,6 +54,7 @@ obj-$(CONFIG_TOUCHSCREEN_MIGOR) += migor_ts.o
> obj-$(CONFIG_TOUCHSCREEN_MMS114) += mms114.o
> obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o
> obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o
> +obj-$(CONFIG_TOUCHSCREEN_MXS_LRADC) += mxs-lradc-ts.o
> obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o
> obj-$(CONFIG_TOUCHSCREEN_HP7XX) += jornada720_ts.o
> obj-$(CONFIG_TOUCHSCREEN_IPAQ_MICRO) += ipaq-micro-ts.o
> diff --git a/drivers/input/touchscreen/mxs-lradc-ts.c b/drivers/input/touchscreen/mxs-lradc-ts.c
> new file mode 100644
> index 0000000..27abb8e
> --- /dev/null
> +++ b/drivers/input/touchscreen/mxs-lradc-ts.c
> @@ -0,0 +1,729 @@
> +/*
> + * Freescale MXS LRADC driver
> + *
> + * Copyright (c) 2012 DENX Software Engineering, GmbH.
> + * Marek Vasut <marex@xxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/module.h>
> +#include <linux/mfd/mxs-lradc.h>
> +#include <linux/platform_device.h>
> +
> +/*
> + * Touchscreen handling
> + */
> +enum mxs_lradc_ts_plate {
> + LRADC_TOUCH = 0,
> + LRADC_SAMPLE_X,
> + LRADC_SAMPLE_Y,
> + LRADC_SAMPLE_PRESSURE,
> + LRADC_SAMPLE_VALID,
> +};
> +
> +struct mxs_lradc_ts {
> + struct mxs_lradc *lradc;
> + struct device *dev;
> + /*
> + * When the touchscreen is enabled, we give it two private virtual
> + * channels: #6 and #7. This means that only 6 virtual channels (instead
> + * of 8) will be available for buffered capture.
> + */
> +#define TOUCHSCREEN_VCHANNEL1 7
> +#define TOUCHSCREEN_VCHANNEL2 6
> +
> + struct input_dev *ts_input;
> +
> + enum mxs_lradc_ts_plate cur_plate; /* state machine */
> + bool ts_valid;
> + unsigned ts_x_pos;
> + unsigned ts_y_pos;
> + unsigned ts_pressure;
> +
> + /* handle touchscreen's physical behaviour */
> + /* samples per coordinate */
> + unsigned over_sample_cnt;
> + /* time clocks between samples */
> + unsigned over_sample_delay;
> + /* time in clocks to wait after the plates where switched */
> + unsigned settling_delay;
> +};
> +
> +static u32 mxs_lradc_plate_mask(struct mxs_lradc *lradc)
> +{
> + if (lradc->soc == IMX23_LRADC)
> + return LRADC_CTRL0_MX23_PLATE_MASK;
> + return LRADC_CTRL0_MX28_PLATE_MASK;
> +}
> +
> +static u32 mxs_lradc_touch_detect_bit(struct mxs_lradc *lradc)
> +{
> + if (lradc->soc == IMX23_LRADC)
> + return LRADC_CTRL0_MX23_TOUCH_DETECT_ENABLE;
> + return LRADC_CTRL0_MX28_TOUCH_DETECT_ENABLE;
> +}
> +
> +static u32 mxs_lradc_drive_x_plate(struct mxs_lradc *lradc)
> +{
> + if (lradc->soc == IMX23_LRADC)
> + return LRADC_CTRL0_MX23_XP | LRADC_CTRL0_MX23_XM;
> + return LRADC_CTRL0_MX28_XPPSW | LRADC_CTRL0_MX28_XNNSW;
> +}
> +
> +static u32 mxs_lradc_drive_y_plate(struct mxs_lradc *lradc)
> +{
> + if (lradc->soc == IMX23_LRADC)
> + return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_YM;
> + return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_YNNSW;
> +}
> +
> +static u32 mxs_lradc_drive_pressure(struct mxs_lradc *lradc)
> +{
> + if (lradc->soc == IMX23_LRADC)
> + return LRADC_CTRL0_MX23_YP | LRADC_CTRL0_MX23_XM;
> + return LRADC_CTRL0_MX28_YPPSW | LRADC_CTRL0_MX28_XNNSW;
> +}
> +
> +static bool mxs_lradc_check_touch_event(struct mxs_lradc *lradc)
> +{
> + return !!(readl(lradc->base + LRADC_STATUS) &
> + LRADC_STATUS_TOUCH_DETECT_RAW);
> +}
> +
> +static void mxs_lradc_map_ts_channel(struct mxs_lradc *lradc, unsigned vch,
> + unsigned ch)
> +{
> + mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(vch),
> + LRADC_CTRL4);
> + mxs_lradc_reg_set(lradc, LRADC_CTRL4_LRADCSELECT(vch, ch), LRADC_CTRL4);
> +}
> +
> +static void mxs_lradc_setup_ts_channel(struct mxs_lradc_ts *ts, unsigned ch)
> +{
> + struct mxs_lradc *lradc = ts->lradc;
> +
> + /*
> + * prepare for oversampling conversion
> + *
> + * from the datasheet:
> + * "The ACCUMULATE bit in the appropriate channel register
> + * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0;
> + * otherwise, the IRQs will not fire."
> + */
> + mxs_lradc_reg_wrt(lradc, LRADC_CH_ACCUMULATE |
> + LRADC_CH_NUM_SAMPLES(ts->over_sample_cnt - 1),
> + LRADC_CH(ch));
> +
> + /* from the datasheet:
> + * "Software must clear this register in preparation for a
> + * multi-cycle accumulation.
> + */
> + mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch));
> +
> + /*
> + * prepare the delay/loop unit according to the oversampling count
> + *
> + * from the datasheet:
> + * "The DELAY fields in HW_LRADC_DELAY0, HW_LRADC_DELAY1,
> + * HW_LRADC_DELAY2, and HW_LRADC_DELAY3 must be non-zero; otherwise,
> + * the LRADC will not trigger the delay group."
> + */
> + mxs_lradc_reg_wrt(lradc, LRADC_DELAY_TRIGGER(1 << ch) |
> + LRADC_DELAY_TRIGGER_DELAYS(0) |
> + LRADC_DELAY_LOOP(ts->over_sample_cnt - 1) |
> + LRADC_DELAY_DELAY(ts->over_sample_delay - 1),
> + LRADC_DELAY(3));
> +
> + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch), LRADC_CTRL1);
> +
> + /*
> + * after changing the touchscreen plates setting
> + * the signals need some initial time to settle. Start the
> + * SoC's delay unit and start the conversion later
> + * and automatically.
> + */
> + mxs_lradc_reg_wrt(
> + lradc,
> + LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */
> + LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) | /* trigger DELAY unit#3 */
> + LRADC_DELAY_KICK |
> + LRADC_DELAY_DELAY(ts->settling_delay),
> + LRADC_DELAY(2));
> +}
> +
> +/*
> + * Pressure detection is special:
> + * We want to do both required measurements for the pressure detection in
> + * one turn. Use the hardware features to chain both conversions and let the
> + * hardware report one interrupt if both conversions are done
> + */
> +static void mxs_lradc_setup_ts_pressure(struct mxs_lradc_ts *ts, unsigned ch1,
> + unsigned ch2)
> +{
> + struct mxs_lradc *lradc = ts->lradc;
> + u32 reg;
> +
> + /*
> + * prepare for oversampling conversion
> + *
> + * from the datasheet:
> + * "The ACCUMULATE bit in the appropriate channel register
> + * HW_LRADC_CHn must be set to 1 if NUM_SAMPLES is greater then 0;
> + * otherwise, the IRQs will not fire."
> + */
> + reg = LRADC_CH_ACCUMULATE |
> + LRADC_CH_NUM_SAMPLES(ts->over_sample_cnt - 1);
> + mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch1));
> + mxs_lradc_reg_wrt(lradc, reg, LRADC_CH(ch2));
> +
> + /* from the datasheet:
> + * "Software must clear this register in preparation for a
> + * multi-cycle accumulation.
> + */
> + mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch1));
> + mxs_lradc_reg_clear(lradc, LRADC_CH_VALUE_MASK, LRADC_CH(ch2));
> +
> + /* prepare the delay/loop unit according to the oversampling count */
> + mxs_lradc_reg_wrt(
> + lradc,
> + LRADC_DELAY_TRIGGER(1 << ch1) |
> + LRADC_DELAY_TRIGGER(1 << ch2) | /* start both channels */
> + LRADC_DELAY_TRIGGER_DELAYS(0) |
> + LRADC_DELAY_LOOP(ts->over_sample_cnt - 1) |
> + LRADC_DELAY_DELAY(ts->over_sample_delay - 1),
> + LRADC_DELAY(3));
> +
> + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_LRADC_IRQ(ch2), LRADC_CTRL1);
> +
> + /*
> + * after changing the touchscreen plates setting
> + * the signals need some initial time to settle. Start the
> + * SoC's delay unit and start the conversion later
> + * and automatically.
> + */
> + mxs_lradc_reg_wrt(
> + lradc,
> + LRADC_DELAY_TRIGGER(0) | /* don't trigger ADC */
> + LRADC_DELAY_TRIGGER_DELAYS(BIT(3)) | /* trigger DELAY unit#3 */
> + LRADC_DELAY_KICK |
> + LRADC_DELAY_DELAY(ts->settling_delay), LRADC_DELAY(2));
> +}
> +
> +static unsigned mxs_lradc_ts_read_raw_channel(struct mxs_lradc_ts *ts,
> + unsigned channel)
> +{
> + u32 reg;
> + unsigned num_samples, val;
> + struct mxs_lradc *lradc = ts->lradc;
> +
> + reg = readl(lradc->base + LRADC_CH(channel));
> + if (reg & LRADC_CH_ACCUMULATE)
> + num_samples = ts->over_sample_cnt;
> + else
> + num_samples = 1;
> +
> + val = (reg & LRADC_CH_VALUE_MASK) >> LRADC_CH_VALUE_OFFSET;
> + return val / num_samples;
> +}
> +
> +static unsigned mxs_lradc_read_ts_pressure(struct mxs_lradc_ts *ts,
> + unsigned ch1, unsigned ch2)
> +{
> + u32 reg, mask;
> + unsigned pressure, m1, m2;
> + struct mxs_lradc *lradc = ts->lradc;
> +
> + mask = LRADC_CTRL1_LRADC_IRQ(ch1) | LRADC_CTRL1_LRADC_IRQ(ch2);
> + reg = readl(lradc->base + LRADC_CTRL1) & mask;
> +
> + while (reg != mask) {
> + reg = readl(lradc->base + LRADC_CTRL1) & mask;
> + dev_dbg(ts->dev, "One channel is still busy: %X\n", reg);
> + }
> +
> + m1 = mxs_lradc_ts_read_raw_channel(ts, ch1);
> + m2 = mxs_lradc_ts_read_raw_channel(ts, ch2);
> +
> + if (m2 == 0) {
> + dev_warn(ts->dev, "Cannot calculate pressure\n");
> + return 1 << (LRADC_RESOLUTION - 1);
> + }
> +
> + /* simply scale the value from 0 ... max ADC resolution */
> + pressure = m1;
> + pressure *= (1 << LRADC_RESOLUTION);
> + pressure /= m2;
> +
> + dev_dbg(ts->dev, "Pressure = %u\n", pressure);
> + return pressure;
> +}
> +
> +#define TS_CH_XP 2
> +#define TS_CH_YP 3
> +#define TS_CH_XM 4
> +#define TS_CH_YM 5
> +
> +/*
> + * YP(open)--+-------------+
> + * | |--+
> + * | | |
> + * YM(-)--+-------------+ |
> + * +--------------+
> + * | |
> + * XP(weak+) XM(open)
> + *
> + * "weak+" means 200k Ohm VDDIO
> + * (-) means GND
> + */
> +static void mxs_lradc_setup_touch_detection(struct mxs_lradc_ts *ts)
> +{
> + struct mxs_lradc *lradc = ts->lradc;
> +
> + /*
> + * In order to detect a touch event the 'touch detect enable' bit
> + * enables:
> + * - a weak pullup to the X+ connector
> + * - a strong ground at the Y- connector
> + */
> + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
> + mxs_lradc_reg_set(lradc, mxs_lradc_touch_detect_bit(lradc),
> + LRADC_CTRL0);
> +}
> +
> +/*
> + * YP(meas)--+-------------+
> + * | |--+
> + * | | |
> + * YM(open)--+-------------+ |
> + * +--------------+
> + * | |
> + * XP(+) XM(-)
> + *
> + * (+) means here 1.85 V
> + * (-) means here GND
> + */
> +static void mxs_lradc_prepare_x_pos(struct mxs_lradc_ts *ts)
> +{
> + struct mxs_lradc *lradc = ts->lradc;
> +
> + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
> + mxs_lradc_reg_set(lradc, mxs_lradc_drive_x_plate(lradc), LRADC_CTRL0);
> +
> + ts->cur_plate = LRADC_SAMPLE_X;
> + mxs_lradc_map_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YP);
> + mxs_lradc_setup_ts_channel(ts, TOUCHSCREEN_VCHANNEL1);
> +}
> +
> +/*
> + * YP(+)--+-------------+
> + * | |--+
> + * | | |
> + * YM(-)--+-------------+ |
> + * +--------------+
> + * | |
> + * XP(open) XM(meas)
> + *
> + * (+) means here 1.85 V
> + * (-) means here GND
> + */
> +static void mxs_lradc_prepare_y_pos(struct mxs_lradc_ts *ts)
> +{
> + struct mxs_lradc *lradc = ts->lradc;
> +
> + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
> + mxs_lradc_reg_set(lradc, mxs_lradc_drive_y_plate(lradc), LRADC_CTRL0);
> +
> + ts->cur_plate = LRADC_SAMPLE_Y;
> + mxs_lradc_map_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_XM);
> + mxs_lradc_setup_ts_channel(ts, TOUCHSCREEN_VCHANNEL1);
> +}
> +
> +/*
> + * YP(+)--+-------------+
> + * | |--+
> + * | | |
> + * YM(meas)--+-------------+ |
> + * +--------------+
> + * | |
> + * XP(meas) XM(-)
> + *
> + * (+) means here 1.85 V
> + * (-) means here GND
> + */
> +static void mxs_lradc_prepare_pressure(struct mxs_lradc_ts *ts)
> +{
> + struct mxs_lradc *lradc = ts->lradc;
> +
> + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
> + mxs_lradc_reg_set(lradc, mxs_lradc_drive_pressure(lradc), LRADC_CTRL0);
> +
> + ts->cur_plate = LRADC_SAMPLE_PRESSURE;
> + mxs_lradc_map_ts_channel(lradc, TOUCHSCREEN_VCHANNEL1, TS_CH_YM);
> + mxs_lradc_map_ts_channel(lradc, TOUCHSCREEN_VCHANNEL2, TS_CH_XP);
> + mxs_lradc_setup_ts_pressure(ts, TOUCHSCREEN_VCHANNEL2,
> + TOUCHSCREEN_VCHANNEL1);
> +}
> +
> +static void mxs_lradc_enable_touch_detection(struct mxs_lradc_ts *ts)
> +{
> + mxs_lradc_setup_touch_detection(ts);
> +
> + ts->cur_plate = LRADC_TOUCH;
> + mxs_lradc_reg_clear(ts->lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ |
> + LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1);
> + mxs_lradc_reg_set(ts->lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN,
> + LRADC_CTRL1);
> +}
> +
> +static void mxs_lradc_start_touch_event(struct mxs_lradc_ts *ts)
> +{
> + mxs_lradc_reg_clear(ts->lradc,
> + LRADC_CTRL1_TOUCH_DETECT_IRQ_EN,
> + LRADC_CTRL1);
> + mxs_lradc_reg_set(ts->lradc,
> + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1),
> + LRADC_CTRL1);
> + /*
> + * start with the Y-pos, because it uses nearly the same plate
> + * settings like the touch detection
> + */
> + mxs_lradc_prepare_y_pos(ts);
> +}
> +
> +static void mxs_lradc_report_ts_event(struct mxs_lradc_ts *ts)
> +{
> + input_report_abs(ts->ts_input, ABS_X, ts->ts_x_pos);
> + input_report_abs(ts->ts_input, ABS_Y, ts->ts_y_pos);
> + input_report_abs(ts->ts_input, ABS_PRESSURE, ts->ts_pressure);
> + input_report_key(ts->ts_input, BTN_TOUCH, 1);
> + input_sync(ts->ts_input);
> +}
> +
> +static void mxs_lradc_complete_touch_event(struct mxs_lradc_ts *ts)
> +{
> + struct mxs_lradc *lradc = ts->lradc;
> +
> + mxs_lradc_setup_touch_detection(ts);
> + ts->cur_plate = LRADC_SAMPLE_VALID;
> + /*
> + * start a dummy conversion to burn time to settle the signals
> + * note: we are not interested in the conversion's value
> + */
> + mxs_lradc_reg_wrt(lradc, 0, LRADC_CH(TOUCHSCREEN_VCHANNEL1));
> + mxs_lradc_reg_clear(lradc,
> + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) |
> + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2),
> + LRADC_CTRL1);
> + mxs_lradc_reg_wrt(
> + lradc,
> + LRADC_DELAY_TRIGGER(1 << TOUCHSCREEN_VCHANNEL1) |
> + LRADC_DELAY_KICK | LRADC_DELAY_DELAY(10), /* waste 5 ms */
> + LRADC_DELAY(2));
> +}
> +
> +/*
> + * in order to avoid false measurements, report only samples where
> + * the surface is still touched after the position measurement
> + */
> +static void mxs_lradc_finish_touch_event(struct mxs_lradc_ts *ts, bool valid)
> +{
> + struct mxs_lradc *lradc = ts->lradc;
> +
> + /* if it is still touched, report the sample */
> + if (valid && mxs_lradc_check_touch_event(lradc)) {
> + ts->ts_valid = true;
> + mxs_lradc_report_ts_event(ts);
> + }
> +
> + /* if it is even still touched, continue with the next measurement */
> + if (mxs_lradc_check_touch_event(lradc)) {
> + mxs_lradc_prepare_y_pos(ts);
> + return;
> + }
> +
> + if (ts->ts_valid) {
> + /* signal the release */
> + ts->ts_valid = false;
> + input_report_key(ts->ts_input, BTN_TOUCH, 0);
> + input_sync(ts->ts_input);
> + }
> +
> + /* if it is released, wait for the next touch via IRQ */
> + ts->cur_plate = LRADC_TOUCH;
> + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(2));
> + mxs_lradc_reg_wrt(lradc, 0, LRADC_DELAY(3));
> + mxs_lradc_reg_clear(lradc,
> + LRADC_CTRL1_TOUCH_DETECT_IRQ |
> + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) |
> + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1),
> + LRADC_CTRL1);
> + mxs_lradc_reg_set(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN, LRADC_CTRL1);
> +}
> +
> +/* touchscreen's state machine */
> +static void mxs_lradc_handle_touch(struct mxs_lradc_ts *ts)
> +{
> + struct mxs_lradc *lradc = ts->lradc;
> +
> + switch (ts->cur_plate) {
> + case LRADC_TOUCH:
> + if (mxs_lradc_check_touch_event(lradc))
> + mxs_lradc_start_touch_event(ts);
> + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ,
> + LRADC_CTRL1);
> + return;
> +
> + case LRADC_SAMPLE_Y:
> + ts->ts_y_pos =
> + mxs_lradc_ts_read_raw_channel(ts, TOUCHSCREEN_VCHANNEL1);
> + mxs_lradc_prepare_x_pos(ts);
> + return;
> +
> + case LRADC_SAMPLE_X:
> + ts->ts_x_pos =
> + mxs_lradc_ts_read_raw_channel(ts, TOUCHSCREEN_VCHANNEL1);
> + mxs_lradc_prepare_pressure(ts);
> + return;
> +
> + case LRADC_SAMPLE_PRESSURE:
> + ts->ts_pressure =
> + mxs_lradc_read_ts_pressure(ts,
> + TOUCHSCREEN_VCHANNEL2,
> + TOUCHSCREEN_VCHANNEL1);
> + mxs_lradc_complete_touch_event(ts);
> + return;
> +
> + case LRADC_SAMPLE_VALID:
> + mxs_lradc_finish_touch_event(ts, 1);
> + break;
> + }
> +}
> +
> +/*
> + * IRQ Handling
> + */
> +static irqreturn_t mxs_lradc_ts_handle_irq(int irq, void *data)
> +{
> + struct mxs_lradc_ts *ts = data;
> + struct mxs_lradc *lradc = ts->lradc;
> + unsigned long reg = readl(lradc->base + LRADC_CTRL1);
> + u32 clr_irq = mxs_lradc_irq_mask(lradc);
> + const u32 ts_irq_mask =
> + LRADC_CTRL1_TOUCH_DETECT_IRQ |
> + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) |
> + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2);
> +
> + if (!(reg & mxs_lradc_irq_mask(lradc)))
> + return IRQ_NONE;
> +
> + if (lradc->use_touchscreen && (reg & ts_irq_mask)) {
> + mxs_lradc_handle_touch(ts);
> +
> + /* Make sure we don't clear the next conversion's interrupt. */
> + clr_irq &= ~(LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL1) |
> + LRADC_CTRL1_LRADC_IRQ(TOUCHSCREEN_VCHANNEL2));
> + mxs_lradc_reg_clear(lradc, reg & clr_irq, LRADC_CTRL1);
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int mxs_lradc_ts_open(struct input_dev *dev)
> +{
> + struct mxs_lradc_ts *ts = input_get_drvdata(dev);
> +
> + /* Enable the touch-detect circuitry. */
> + mxs_lradc_enable_touch_detection(ts);
> +
> + return 0;
> +}
> +
> +static void mxs_lradc_disable_ts(struct mxs_lradc_ts *ts)
> +{
> + struct mxs_lradc *lradc = ts->lradc;
> +
> + /* stop all interrupts from firing */
> + mxs_lradc_reg_clear(lradc, LRADC_CTRL1_TOUCH_DETECT_IRQ_EN |
> + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL1) |
> + LRADC_CTRL1_LRADC_IRQ_EN(TOUCHSCREEN_VCHANNEL2), LRADC_CTRL1);
> +
> + /* Power-down touchscreen touch-detect circuitry. */
> + mxs_lradc_reg_clear(lradc, mxs_lradc_plate_mask(lradc), LRADC_CTRL0);
> +}
> +
> +static void mxs_lradc_ts_close(struct input_dev *dev)
> +{
> + struct mxs_lradc_ts *ts = input_get_drvdata(dev);
> +
> + mxs_lradc_disable_ts(ts);
> +}
> +
> +static void mxs_lradc_ts_hw_init(struct mxs_lradc_ts *ts)
> +{
> + struct mxs_lradc *lradc = ts->lradc;
> +
> + /* Configure the touchscreen type */
> + if (lradc->soc == IMX28_LRADC) {
> + mxs_lradc_reg_clear(lradc, LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
> + LRADC_CTRL0);
> +
> + if (lradc->use_touchscreen == MXS_LRADC_TOUCHSCREEN_5WIRE)
> + mxs_lradc_reg_set(lradc,
> + LRADC_CTRL0_MX28_TOUCH_SCREEN_TYPE,
> + LRADC_CTRL0);
> + }
> +}
> +
> +static void mxs_lradc_ts_hw_stop(struct mxs_lradc_ts *ts)
> +{
> + int i;
> + struct mxs_lradc *lradc = ts->lradc;
> +
> + mxs_lradc_reg_clear(lradc,
> + lradc->buffer_vchans << LRADC_CTRL1_LRADC_IRQ_EN_OFFSET,
> + LRADC_CTRL1);
> +
> + for (i = 1; i < LRADC_MAX_DELAY_CHANS; i++)
> + mxs_lradc_reg_wrt(ts->lradc, 0, LRADC_DELAY(i));
> +}
> +
> +static int mxs_lradc_ts_register(struct mxs_lradc_ts *ts)
> +{
> + struct input_dev *input = ts->ts_input;
> + struct device *dev = ts->dev;
> + struct mxs_lradc *lradc = ts->lradc;
> +
> + if (!lradc->use_touchscreen)
> + return 0;
> +
> + input->name = DRIVER_NAME_TS;
> + input->id.bustype = BUS_HOST;
> + input->dev.parent = dev;
> + input->open = mxs_lradc_ts_open;
> + input->close = mxs_lradc_ts_close;
> +
> + __set_bit(EV_ABS, input->evbit);
> + __set_bit(EV_KEY, input->evbit);
> + __set_bit(BTN_TOUCH, input->keybit);
> + __set_bit(INPUT_PROP_DIRECT, input->propbit);
> + input_set_abs_params(input, ABS_X, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0);
> + input_set_abs_params(input, ABS_Y, 0, LRADC_SINGLE_SAMPLE_MASK, 0, 0);
> + input_set_abs_params(input, ABS_PRESSURE, 0, LRADC_SINGLE_SAMPLE_MASK,
> + 0, 0);
> +
> + ts->ts_input = input;
> + input_set_drvdata(input, ts);
> +
> + return input_register_device(input);
> +}
> +
> +static int mxs_lradc_ts_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct device_node *node = dev->parent->of_node;
> + struct mxs_lradc *lradc = dev_get_platdata(dev);
> + struct mxs_lradc_ts *ts;
> + struct input_dev *input;
> + int touch_ret, ret, i;
> + u32 ts_wires = 0, adapt;
> +
> + ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
> + input = devm_input_allocate_device(dev);
> + if (!ts || !input)
> + return -ENOMEM;
> +
> + ts->lradc = lradc;
> + ts->dev = dev;
> + ts->ts_input = input;
> + platform_set_drvdata(pdev, ts);
> + input_set_drvdata(input, ts);
> +
> + touch_ret = of_property_read_u32(node, "fsl,lradc-touchscreen-wires",
> + &ts_wires);
> +
> + if (of_property_read_u32(node, "fsl,ave-ctrl", &adapt)) {
> + ts->over_sample_cnt = 4;
> + } else {
> + if (adapt < 1 || adapt > 32) {
> + dev_err(ts->dev, "Invalid sample count (%u)\n",
> + adapt);
> + touch_ret = -EINVAL;
> + } else {
> + ts->over_sample_cnt = adapt;
> + }
> + }
> +
> + if (of_property_read_u32(node, "fsl,ave-delay", &adapt)) {
> + ts->over_sample_delay = 2;
> + } else {
> + if (adapt < 2 || adapt > LRADC_DELAY_DELAY_MASK + 1) {
> + dev_err(ts->dev, "Invalid sample delay (%u)\n",
> + adapt);
> + touch_ret = -EINVAL;
> + } else {
> + ts->over_sample_delay = adapt;
> + }
> + }
> +
> + if (of_property_read_u32(node, "fsl,settling", &adapt)) {
> + ts->settling_delay = 10;
> + } else {
> + if (adapt < 1 || adapt > LRADC_DELAY_DELAY_MASK) {
> + dev_err(ts->dev, "Invalid settling delay (%u)\n",
> + adapt);
> + touch_ret = -EINVAL;
> + } else {
> + ts->settling_delay = adapt;
> + }
> + }
> +
> + mxs_lradc_ts_hw_init(ts);
> + for (i = 0; i < lradc->irq_count; i++) {
> + ret = devm_request_irq(dev, lradc->irq[i],
> + mxs_lradc_ts_handle_irq,
> + IRQF_SHARED, lradc->irq_name[i], ts);
As with the adc driver, are we actually using all of these? I'd prefer we
only grab the ones that are actually relevant.
> + if (ret)
> + return ret;
> + }
> +
> + if (!touch_ret) {
> + ret = mxs_lradc_ts_register(ts);
> + if (!ret)
> + goto err_ts_register;
> + }
> +
> + return 0;
> +
> +err_ts_register:
> + mxs_lradc_ts_hw_stop(ts);
> + return ret;
> +}
> +
> +static int mxs_lradc_ts_remove(struct platform_device *pdev)
> +{
> + struct mxs_lradc_ts *ts = platform_get_drvdata(pdev);
> +
> + mxs_lradc_ts_hw_stop(ts);
> +
> + return 0;
> +}
> +
> +static struct platform_driver mxs_lradc_ts_driver = {
> + .driver = {
> + .name = DRIVER_NAME_TS,
> + },
> + .probe = mxs_lradc_ts_probe,
> + .remove = mxs_lradc_ts_remove,
> +};
> +module_platform_driver(mxs_lradc_ts_driver);
> +
> +MODULE_LICENSE("GPL v2");
>
--
To unsubscribe from this list: send the line "unsubscribe linux-iio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
